Pavilion 15-p264na: shortcuts moved to the 4 corners of the screen

Similar Questions

• Black bars moving on the screen, flickering screen

  Hello everyone, I have buyed this summer than a laptop and I noticed several times some Black bars moving on the screen, I tried a few methods how to remove the battery, restarting the computer, etc... After the reboot, everything seems to be ok, what guys do you recommend me to do? I live in another country (Romania) and the laptop was buyed Austria - MediaMarkt, I can't get the laptop to the place where I buyed of... The laptop is a HP Pavilion 1352Eg G6, I expect answers, thanks in addvance, best regards.

  I would like to start by assuring the BIOS and video card drivers are updated here.
  
  Since it is temporarily resolved by restarting, it might be a software problem and driver updates help in general.
  Have you noticed if it seems to happen after using a certain program?
  
  You can try to connect the laptop to an external monitor. If the same behavior is on the external monitor, then it's a video card problem. If it only happens to the screen of the laptop, then it might be software or a hardware in the Control Panel, motherboard problem or somewhere in between.

• On my ipad3 I rectangles blue moving around the screen. Momentarily switches to an article before moving on. Very irritating

  I have an iPad 3. Model MC707B/A. Version 9.3.2 (13F69).

  Blue rectangles are continually moving around the screen from one section to the other. Also a blue stripe sometimes crosses the screen. Has started yesterday for no apparent reason.

  I have tried rebooting with no luck. Helpline Apple could suggest only reset to factory settings. Does anyone have a less radical solution?

  This is one of the accessibility features. It's the switch command. You will need to go into settings > general > accessibility > switch control and turn it off. It is possible, that's what the setting is triple clicking the home button. Try triple clicking again and see if that if he stops, otherwise, use the road that I explained earlier.

• WINDOWS SCREEN COMES UP WITH THE BARS MOVING ON THE SCREEN BUT WILL GO NO FURTHER LOADING.

  THE WINDOWS SCREEN COMES WITH THE BARS MOVING ON THE SCREEN BUT WILL NOT GO FURTHER.

  Hello

  its possible your video drivers of meetings required.

  Info

  http://www.ehow.com/how_4921037_update-display-drivers-Windows-XP.html

• Cursor starts moving across the screen from left to right after the wake up the computer from standby or hibernation

  Original title: cursor goes wild

  My PC to 'wake up' sleep/hibernate, the cursor initially moving across the screen from left to right, in which window is open, destroy all the document is on the screen. I force Windows to close. How to solve this other than turning off standby/hibernation?

  Looks like the cursor of the mouse is very sensitive when the computer comes out of standby or hibernation.
  I suggest that you go in the mouse properties and lower the sensitivity and see if that helps.
  You also need to update any driver mouse if possible.

  Let us know if that helps.

  Marilyn

• my built in web cam does not work, why. I had working for minute, but moved to the screen and he went

  my web cam isn.t work. When I turn on it says make sure it is turned on. How do I do that? Once when I clickrd on the icon, it came on but exploded when I moved to the screen. Now, I can't get it working again.

  Thanks for the help

  Hello

  
  1. What is the brand and model of the computer?
  2. you receive an error message or error code?
  
  Try the following and see if it helps.
  
  Method 1:
  
  Run the hardware troubleshooting tool.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:
  Step 1:
  Check if the webcam driver is listed in Device Manager
  Step 2:
  
  Try to disable the webcam and then turn it on and check if it helps.
  a. open the Device Manager.
  b. click on imaging devices.
  c. right-click on the Webcam device.
  d. Select Disable.
  Note: Try the steps up to the c and select on to activate the webcam.
  Method 3:
  
  I suggest you install the latest updates for Webcam and check if it helps.
  
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Note: If you still have the problem then I suggest to uninstall and reinstall the webcam software and check if it helps.
  
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

• HP Pavilion g7-1261nr turns on but the screen remains blank

  I turned on my HP Pavilion g7-1261nr the other day, and the fan ran hard, as well as the caps lock and number lock LED flashes once every two seconds. The screen remains blank during the process. Could someone help me with this problem please?

  PcMatic I invite you to read the links provided, because they are there to help.

  If you entered my link, you would have seen this:

  Caps Lock/Num Lock LED component tested error Condition

  LED flashes 1 time CPU CPU not functional

  2 times for BIOS BIOS corruption failure LEDs blinking

  LED flashes 3 times non-functional Memory Module error

  LED flashes 4 times Graphics Graphics controller not functional

  Map of 5 times the system board failure system general LEDs flashing

  Authentication failed for the BIOS BIOS 6 times blinking of the LEDs

  According to the times that they blink, of what I mean, it's once and then a pause. Which would indicate that the CPU is broken.

  Only a repair can fix that.

• How to cancel touchstart touchmove is triggered or when I moved to the screen

  Hi all.

  I am building an application of cocktail recipes and used click as the event trigger, but the response time is very slow when I test it on my phone, so I want to try touchstart as the trigger, but if I touch the screen to scroll, when I let go the event where I touched the screen is fired. How can I disable touchstart when I moved or scroll the screen with my finger.

  I've attached a picture so you'll see hpw it is supposed to work. the "button" will be to the image and the text.

  Thank you very much

  

  Thx for your answer Rbyn_cpl

  I added the script fastclick.js for my composition and who took care of the problem. He removed the moulin.300 FRO the click action.

• With windows 7, any display (Start button, label of the file on the toolbar) moved off the screen to the left and to the right there is a black margin. How to fix?

  If I reduce the resolution, all will be displayed but smaller. I would like to keep full resolution, but back off the screen to the right. It happened all of a sudden without any modification of the navigation by me.

  Fixed, maybe the symptoms. I changed the display size of 150 to 125% in control panel - display, and the situation rectified itself. Time will tell if the fix is robust. Thank you. d

• Desktop iMac moving off the screen

  A few days ago my desktop iMac computer began to slide off the screen to the left each time I have maximize my window Chrome. It comes at the time when I reduce once more the browser.  Is there a setting that I can change it back to its normal behavior?

  iMac late 2012

  Yosemite

  Thank you.

  Hi shug2,

  Looks like there is a display problem when maximizing the Chrome browser on your iMac. If you haven't already done so, try to run through the steps of troubleshooting basic described below on the Chrome support site.

  Base - Chrome help troubleshooting steps

  If the problem persists, this article provides a lot of information and troubleshooting tips that can help you isolate and solve software problems more in OS X:

  Insulation in Mac OS X - Apple support questions

  So long.

• Pavilion 20-b130ea - how to tilt the screen?

  Just bought this all-in-one desktop computer, presentation text of website says the screen tilts between 10 and 25 degrees, but I can't change it. Help!

  The "kick stand" in the back should rotate at anchor on the computer. Doing the "kick stand" will change the angle where the display.

  Please send Bravo

• shortcut to change the screen resolution

  Several times I clicked on a key while maintaining that the mouse and my screen suddenly zoom in very high resolution.

  It would help if I knew how to do to bring the resolution in system preferences.

  No one knows what the shortcut, it is that I accidentally click and how can I reverse the action

  Try holding down the option/Alt click on the green button at the top left.

• What is the keyboard shortcut to rotate the screen?

  What is the shortcut to run?  I think I must have accidentally hit these keys.  I hope that there is a.  It is very difficult to reorganize the menu drop down and select rotation because the movement of the mouse is difficult.

  In addition, Ctrl + Alt + left or right arrow keys it rotates 90 degrees.

• Y at - it a shortcut to rotate the screen to WIN 8 to a desktop computer?

  I have a monitor of professional Art. I need to rotate the orientation of the windows when I rotate the monitor of the fashion landscape to portrait mode. It is virtually impossible to click on all the necessary buttons with a mouse (it is not a touchscreen). Help, please

  Y at - it a program or a shortcut of WIN 8 existing to do this?

  1. Download Display.

  2. Extract the Display.exe in a directory of your choice (for example, C:\Display.exe ).

  3. Use the [right-click] -> New -> Shortcut dialog to create shortcuts to the desired directions:

     C:\Display.exe /rotate:0
     C:\Display.exe /rotate:90
     C:\Display.exe /rotate:180
     C:\Display.exe /rotate:270
     
     

  4. (optional) In the properties for each shortcut, you can specify a Shortcut Key .

• the browser window appears frozen if he sat down behind other applications for some time, until the window is moved (i.e. scroll, or the window is moved around the screen).

  It's almost as if I am interested in a picture of my firefox browser. If I click on tabs in the browser, add a new tab or try and change the url, it seems frozen. I can say that the browser is not frozen, because the only thing that changes if I click on the tabs is the title at the top of the page. Everything is frozen.

  I did not notice this until FF 7 - ish.

  If I disconnect the RemoveTabs add-on, the problem seems to disappear.
  A week before, I have not had the problem.
  Updat ff 8.0 naar 8.0.1 also seems to fix the problem