Pavilion 17: Speed of the Ethernet card

Similar Questions

• How to detect the duplex and the current speed of the Ethernet card?

  Hi, is there a tool to measure the current Ethernet card speed and duplex? I remember we had one for XP, but it does not work on Win7.

  Any thoughts?

  Specifically, I need to make sure my router and my NIC to work together without duplex mismatch.

  Thank you

  You will never see these actual speeds anyway. They are all theoretical maximum speeds. The only way to find your actual speed is a test of speed through your Internet access provider. Frenchie

• Is there a speed limit on the ethernet cards?

  Hey guys do you have an idea who is at - it a speed limit on the Ethernet cards, because I can use the P2P so fast that, after awhile, my internet connection is stopped as, I can't do anything unless I unplug, wait a while and connect again. Don't you think that it is a hardware or software problem?
  By the way: my Ethernet card is Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
  I need your help. Thank you.

  Hello

  In my opinion, if you have some problems with the internet connection the reason should not be any kind of speed limit but also other different reasons.

  In your ad, you're not mentioned that you do exactly. You write e-mails or do the download of two different movies and many mp3 files?

  As far as I know if you do the full download the connection can be slowed or even stopped by FAI. Is your cable may be defective. The LAN cable has 8 lines and if one line is faulty speed will fall automatically.

  I also recommend you use a malware scanner and check the unit.

  Good bye

• Need the correct driver for the ethernet card internal on a Pavilion DV9718ca.

  I downloaded all the drivers for this particular laptop and install. The ethernet card is showing a code 10 in device running Vista Ultimate Manager. The pilot says that it is a Nvidia. I can't seem to find anything on this model especially regarding the ethernet card and drivers, even on Google. Thanks in advance.

  Anyone else who has this problem, you must install the drivers for the nvidia bus enumerator, and then install the driver for the ethernet card. I found the drivers that will work at http://forum.driverpacks.net/viewtopic.php?id=2517

  Thanks for the help.

• HP Pavilion 500-164, upgrade the video card.

  I replaced the power supply in this area for a graphics card into the PCIE slot. I put a Nvidia 9600 GT in the box, not changed no settings, tried to start, and I get no bios and 6 beeps. Any advice?

  Based on specifications, your desktop HP Pavilion 500-164 has been bundled with Windows 8 installed and has a feature called 'Secure Boot'. You must DISABLE "Secure Boot" and ACTIVATE the standby mode 'legacy' in the BIOS before the computer will start with the nVidia 9600 GT installed.

  Please, remove the video card, make changes to the BIOS and turn off the computer. Then, reinstall the video card and turn on the computer. Your problem should be solved.

  Please see Computer Does starts is not after the installation of a videocard (Windows 8) for more information on the subject.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Restoration of the Ethernet card drivers

  Hi all. There is a solution and apply. There seems to be a common problem with WPA Wireless does not not after installing SP3. I've been through it some time ago and learned that this problem can be resolved to move back to their previous version - released 7 Ethernet card driver.

  My problem is after reconstruction my T40, I can't find anywhere to download an older version of the Intel PRO/100/1000 LAN card - all I can find is the most recent. Anyone know where to get hold of older versions?

  Thank you.

  Welcome to the forum! This one might work, give it a shot: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-54046 after you download it, you must go to C > drivers > win > Ethernet and run the Setup file from there. Good luck and we keep abreast.

• Speed of the Ethernet USB adapter

  Hi guys, this is my question.

  I recently switched to a network of 300 Mbps, and I noticed that my wireless and ethernet controllers (RealTek Semiconductor RTL8101/2/3 Family Fast Ethernet NIC / network RealTek Semiconductor RTL8188E Wireless LAN 802.11n PCI-E adapter) have a maximum speed of 100 / 150 Mbps.
  Can I buy an adapter USB Ethernet Gigabit(e.g. this one) for better performance?
  Can I change my wifi controller with

  I think 300 Mbit/s is the speed of the internet data outward, the WAN connection. I'll take the side LAN is gigabit ethernet, and Yes you can get near that speed using a gigabit usb adapter. The gigabit usb adapter will allow internal (LAN) transfer of data to somewhere between 5 - 10 times faster than fast ethernet.

• Pavilion p7-1154: upgrading the graphics card

  Hello

  I want to buy the graphics card NVIDIA 9800GT for graphic design. But before I buy it I would like to know it it is possible to be used on the PC console.

  I guess I have to upgrade the power supply and maybe the motherboard also.

  Please let me know in what concerns the 9800GT what PS and motherboard that I should purchase, if any, that would be adapted to the console. I have Pavilion p7-1154.

  Thank you and best regards

  Illustrator has requirements listed here.   The card mother's only Legacy BIOS, so I would stay with WIN 7, get an EVGA GTX 660 or 670.  It was the last of the EVGA legacy known cards.  The GTX 670 will draw 170W, then I would say once again a Corsair CX600. IT has perfect fit and is better than the recommended 500W unit inactive.

• HP Pavilion a6442p. Update the graphics card with HDMI?

  My second computer is a HP Pavilion a6442p.  I would like to upgrade the graphics card with HDMI because I want to connect it to my TV to use the TV as a monitor.  I realize that the power supply is only 250.  I tried AMD Radeon 4350, but the computer would not set the card to display correctly.  Are there other maps any with HDMI that might work?  I thank in advance, Debbie

  Hi Deb5212,

  Food that I suggested above will replace the existing power supply. It has enough power to handle the NVIDIA 550TI if you wish to get a more powerful video card (but more expensive).

  In general, I recommend the Corsair CX500 because she has enough power to handle most video cards except the very high-end. However, it is more expensive.

  ' HP ' how-to ' articles should be useful.

• (Redirected) Speed of the network card

  How can I find the "speed" of my network card?  Looking at the Device Manager I can tell that the manufacturer, Realtek, but I am trying to determine if I have a 100 mb or end adapter.  My Bill does not or it is displayed in the system configuration page.

  Any help would be appreciated.

  Thank you!

  Better to post this in the networking, Internet, forum of wireless, here:

  http://en.community.Dell.com/forums/3324.aspx

  Bev.

• Pavilion A6724C must update the video card, suggestions?

  My son wants to be able to play COD on my pc, but the video card from the factory is the way to slow. Can you suggest a replacement card which is decent for the games but not super expensive or require changes to the power supply?  Thanks for any help.

  Hello

  There is the version of 512 MB ddr5 on the link below.

  http://www.Newegg.com/product/product.aspx?item=N82E16814130531

  There may be differences between the marks.  The main factor that govern what will work in your PC's power supply 300W - you should know the minimum requirement of the power supply of the card that you intend to buy, as anything that requires more than 300W is unlikely to work properly, or not at all.

  Kind regards

  DP - K

• PC laptop Pavilion 17: what is the NETWORK card in the Pavilion 17?

  This machine is my daughter-in-law. She had a HD crash & replaced the HD. She bought Win 7 Pro 64 bits/load

  on the new HD. I got all operational except for the network card.  I need to load the drivers for the NETWORK card, but I can't find any explanation as to what is the make and model in this machine.  News machine below:

  Model 17-e049WM

  Product E0J75UA #ABA

  SER # 5CD3201PVG

  SYS COUNCIL 1984

  Looks like it's realtek, both wireless and NIC manufacturer. Although the model of the NETWORK adapter is not available, you can download these drivers from here

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&PFID=4&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  or here at HP.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63396.exe

• Pavilion H8 - 1160T: upgrade the video card

  My AMD Radeon graphics card failed (empty 1 screen, 2nd all the vertical lines on the screen) and upgrade to a 900 NVIDIA graphics card.

  As I understand it, my motherboard is a legacy bios and cannot support video cards that need a bios, UEFI (which would include 9XX NVIDIA cards).

  Based on the info below my first question would be... my bios from the motherboard to reset/upgrade of a UEFI bios?

  And second, if not, what would be my best option for a NVIDIA card?  6xx series? (game video and moderate flow)

  Thank you!

  HP Pavilion CPE series H8 - 1160T

  MB-IPISB-CH2 (Chicago) 16 MB of Ram

  AMD Radeon HD6850 graphics card

  Intel Core i7-2600 [email protected]

  Delta 600W power supply

  Bought: 26 Nov 11

  @55LongShot, welcome to the forum.

  55LongShot wrote:
  

  My AMD Radeon graphics card failed (empty 1 screen, 2nd all the vertical lines on the screen) and upgrade to a 900 NVIDIA graphics card.

  As I understand it, my motherboard is a legacy bios and cannot support video cards that need a bios, UEFI (which would include 9XX NVIDIA cards).

  Based on the info below my first question would be... my bios from the motherboard to reset/upgrade of a UEFI bios?  No, the motherboard may not be upgraded in the UEFI.  This is possible at the factory.

  And second, if not, what would be my best option for a NVIDIA card?  6xx series? (game video and moderate flow)  Yes, the latest video cards do not for UEFI were the GTX 660/670.  I suggest that you pick a card mamufacturer and contact their Technical Support for assistance.  MSI has a GTX 750Ti which is equipped with a switch so that it can be used with a Legacy BIOS.  You can check with them to see if will work with your motherboard.

  Thank you!

  HP Pavilion CPE series H8 - 1160T

  MB-IPISB-CH2 (Chicago) 16 MB of Ram

  AMD Radeon HD6850 graphics card

  Intel Core i7-2600 [email protected]

  Delta 600W power supply

  Bought: 26 Nov 11

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP Pavilion 15-n096sa: replacing the wifi card

  can I install a wifi card of 5G to my laptop and if so what make and model No.

  H @jontee41,

  Welcome to the HP Forums!

  This is a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I grabbed you would like to know if the installation about one card Wi - Fi 5 g to your laptop.

  Here is a link to HP Pavilion 15 Notebook PC HP Pavilion TouchSmart 15 Notebook PC Maintenance and Service of Guide. Please note Chapter 3, page 26, item 17, for a list of recommended laptop WIFI cards.

  To say thank you for answering please click the icon below thumbs up .

  If this has addressed your query, please select the solution provided to help others to find this information.

  Good luck!

• Lose network connectivity after the change of speed of the NETWORK card of 100 to 1000

  I changed my speed of 100 to 1000 vmnic0, then I lost all connectivity to the server.  I had to switch mode not picked up and back to 100.  Then I thought that maybe it's a requirement that it is plugged into a gigabit switch, so I plugged it in one and I can't connect to it even if the light shows of link on the server and the vSphere client.   Since I have an Intel Pro 1000 card, should not the system automatically see as such and not a 100 card?  Or does not automatically detect the speed of connection and change it accordingly?

  Try replacing the cable. Make sure auto-negotiation is enabled on all connections.