Pavilion 1723w not sound

Similar Questions

• Pavilion g6 not sound

  This morning, my computer did a bios update.  No sound after this, I restarted the computer, checked and updated the drivers for everything.  Found some info here to make a "hard reboot".  Tried this, no difference.  Went in the F10 boot options and reset the computer to default settings using F9.  Works now.  Thanks to the HP wizard who posted this fix.

  Kudo for the auto fix and the post, thanks for the info!

• My laptop HP Pavilion will not record any sound at all - please help

  Dear all

  My laptop Hp Pavilion is not allow me to record all sounds - not in the built-in microphone and not through any plug microphone I have.

  -J' already checked that my microphone is not muted
  -J' already checked that my microphone is set to the default device
  -J' already checked that my burning software (Audacity) has selected as the device microphone to take his
  -I think I have the latest drivers for my microphone, but I'm not 100% sure

  Can someone please help me with this? I would be very grateful.

  Thanks in advance

  Hello

  Method 1:

  I suggest you to visit the links below and check if it works.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Method 2:

  You can also refer to the steps below:

  a. Open Sound by clicking on the Start button, then Control Panel. In the search box, type sound, and then click sound.
  b. click on the recording tab, click on Microphone and then click Properties.
  c. click the levels tab and make sure the mute button is enabled, if off to click on it to activate sound for this connection and then click on apply.
  d. click on the Advanced tab, click to clear applications to allow him to take exclusive control of this peripheral checkbox and then click OK.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

• just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker?

  just bought HP Pavilion 23xi monitor, but not sound. It is based in the speaker? or any HP monitor built in speaker?

  Hello

  The following link shows its specifications:

  http://WWW8.HP.com/emea_africa/en/products/monitors/product-detail.html?OID=5328978#! tab features =

  No speaker. Please try the following Nice monitor:

  http://store.HP.com/webapp/WCS/stores/servlet/us/en/MDP/accessories-88342--1/HP-Pavilion-touch-monitors--1

  Kind regards.

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• internal speakers on my hp Pavilion do not work

  I have a HP Pavilion dv6700 and my internal speakers stopped working. I went to check and the system says they are working, but not sound. Any ideas?

  Hello

  Try the following.

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp38501-39000/sp38899.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows Vista.

  After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  BabsMKE wrote:

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  settings - do not disturb - off

• IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  IPhone 6 IOS 9.3.1 does not ring when a call comes, neither text does not sound a notification.

  Have you checked the obvious things? E.g.Ring/Silent switch on the left side is not on? Control the volume of ringtone under settings/sounds?

  If they are not serious then have you tried power the phone off and on again? Other sounds work fine, or if all sounds are dumb? for example can play you music through the speaker?

• PAVILION 15 d000sia: SOUND and PCI drivers for hp pavillon15 d000sia

  My computer pc laptop Pavilion 15d000sia have sound in headphone output is plug-in and miss the unknown pci / bus controller / controller pci driver decoding. Kind regards. Need your help

  Hello:

  Try this direct link...

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64349.exe

• Qosmio G50 not sound on HDMI

  * Qosmio G50 not sound on HDMI *.

  Hi all

  I hope everyone recognizes the following and would be kind enough to help me. I searched the forum and tried several of the solutions proposed mainly apply to Vista, but still.

  I hooked up my Qosmio G50 to my Philips LCD HDMI cable. Picture is ok, but there is no sound. I tested the cable with a Toshiba Satellite Pro L550 and it works allright. Image and sound work. But this laptop has Intel HDMI audio.

  I am Windows 7 Home Premium 64 bit slot. I improved by upgrading Toshiba DVD of Vista 64-bit. Unfortunately I do not know with certainty if the HDMI audio worked before that. I think so because I used the laptop to watch a movie on a Panasonic plasma. But I don't remember if it was before or after the upgrade.

  Realtek HD Audio device is installed driver version 6.0.1.5923
  Realtek HDMI Output is selected as default playback device.
  Test gives me graphic response (flashing) but no sound from my TV.
  Choose the other audio device Realtek Digital output doesn't change anything and I do not think it would work anyway.
  I tried to remove the device and then reinstalling the original drivers. I tried the REaltek drivers on their site.
  I tried to change the HDMI view only but what does nog change anything either.

  One thing that worries me is that, under his / Realtek HDMI Output / Properties / he supported Formats are no current format. The satellite gives me audio DTS and others. So I wonder if there should be present formats and if so, how can I change that / add a few.

  Please forgive me if there are mistakes in the text. I translate this to a Dutch version of Windows 7.

  Please help me. All suggestions are welcome!

  I found an article of * Support technique Toshiba * but for Qosmio G30. You must set a default to playback HDMI device

  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  Perhaps, it allows you to...

• Tecra M4: EasyGuard advanced instant security - alarm does not sound

  Hello
  Instant EasyGuard Security Advanced
  I followed the instructions to the "request of Iris' to support Toshiba, but the alarm will not sound.
  I know that the motion detectors work because if I shake the phone enough, the hard drive protection popup will be displayed.

  I even confirmed that the wav file that is listed in the registry exists.
  Does anyone have ideas, what I can check next?
  I already reinstalled all the toshiba utilities in the hope that could fix it.

  Hello

  I put t know which unit you have (European or US model) but ask Iris is written for portable Setup US and the preinstalled image is not the same as on European models.

  I checked the Tecra M4 user manuals and it is not listed as this device is equipped with advanced instant security. You see using indicated such CrossMenu about US page?

  Either way, you make a small mistake. In your ad, you have written two different things. Please check HDD protection tool settings and you will see that there is no option for an alarm. What you're saying is a tool separately, but I'm not sure that it is a part of the package of software for your device.

• DriverMax update drivers. Among the updates was for audio and subsequently did not sound. Soundcard (?) is Realtek AC97 Audio, XP Pro 32 bit SP3

  original title: no sound

  I used drivermax (for the first time) to update the drivers. Among the updates was for audio and subsequently did not sound. I tried to restore to a date backup earlier, but without success. My soundcard (?) is Realtek AC97 Audio, XP Pro 32 bit SP3

  Bad move!

  PC manufacturers sometimes 'tie' in the drivers for their machines so that the only reliable method to update either directly through their Web sites. DriverMax will detect your audio device and go to Realtek to obtain the driver. Not the solution, unfortunately

  MS Update also not as he says, is up to date...

  Go to the website of the manufacturer of the PC/laptop and find the support page for your machine. Download the audio drivers from here and install it.

  If it is a machine that you have built yourself, go to the website of the manufacturer of the motherboard and do the same thing from there.

  See you soon,.
  Jerry

• No audio audio on computer. Fix Center indicates the problem, my audio doesn't work does not sound and manufacturer-both required

  I have an acer CPU. I might delete something that caused audio does not run correctly, but not sound. Speakers are plugged.

  Install the audio for the brand device drivers and the computer audio device model you have.

  (Without device drivers, the operating system has no idea how to talk to the audio device * and * vice versa.)  We can speak English, the other Swahili.  If no member of the House can translate, then you get just a lot of weird looks.)

• HP Pavilion a6214x desktop - sound no longer works.

  I upgraded Windows 7 SP1 from Windows Vista (that came with the computer). Functioning very well working after the upgrade, but recently stopped. I don't have speakers, so I'm interested to troubleshooting problems of his helmet.

  I tried different helmet and different takes, but no luck. HP website does not sound any BIOS update available for my computer.

  Any help would be appreciated. Thank you!

  Hello

  try to update your readers adio...

  Use this link to download your audio discs

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=3633809&

  If you have still no sound, open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all showing that status = started and the Startup Type = Automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  * By clicking on the laurels! White Star is a great way to say thank you on any post that you helped or solved the problem.* *.
  * By selecting 'Accept as Solution' for an answer that solves your problem helps others who are searching the Web for an answer *.

• do not sound smooth playback

  When I play the sound on my PAVILION DV7_4071nr, the sound has a strange vibration and sometimes stops, or jumps.  Any idea what is the problem?  I had this computer for about a month.

  I tried this new control + fn + b and I think it worked.  Thank you, it was driving me crazy.