Pavilion A250n (tattoo harddrive).

Hello

A year ago, my PC would recognize my recovery disk so I contacted HP support and we did a lot of troubleshooting

over a few weeks and they decided that the only way to solve the problem was to tattoo the recovery information on

My motherboard. The problem is that my PC is not under guarantee more and I had to add to this new hard drive and a

now Creative sound card at him. Is it possible that I can solve this problem.

Place everything back to the original configuration. Remove the sound card. Be sure to remove and reinstall the cmos battery and memory. If your initial recovery discs using you don't need to tattoo the computer unless you add a motherboard or replaced the bios chip.

Tags: HP Desktops

Similar Questions

  • Pavilion a250n: how to replace motherboard Pavilion a250n

    I want that on my motherboard on my a250n desktop pc. I need some guidelines on how to make lthis.

    Hi @oudeis,

    HP has more a lot of documents for this model of computer, as the age of 13.

    I found and motherboards to change to another computer, but the process must be close.

    Please look at Pavilion p7-1000 series desktop computers - replacing the motherboard.

    I hope this helps. Please keep me informed of the progress of things.

    If you need help, let me know and I will gladly make all that I can to help you.

    Please let me know if that solves the problem by marking this post as "accept as a Solution.
    To simply say thank you, click the Thumbs up below!

    Thank you.

  • I can copy is more photos on a CD.

    I can copy is more photos on a CD.  HP Pavilion a250n is 10 years old.  I have always used this feature.  Message says that I don't have a CD burner.  Convenience store cannot run because it says WindSAPI.DLL not found, need to re - install... I have no idea what to do next... I just want to copy pix on CD.  Help

    Hello

    Welcome to the community Microsoft and thanks for posting the question.

    According to the description, you are having problems with the copy of photos on a CD.

    1. do you get an error message when you try to copy images to a CD?

    2. what application did you use to copy images?

    3. What is the format of the photos?

    Run the Fixit and check if it helps.

    Your CD or DVD drive cannot read or write media

    You can also check out the link below.

    How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

    Answer to us if you are having problems with the copy of the images or any other issue of Windows, and we would be happy to help you.

    Good day!

    Hope this information helps.

  • problems of home network with WMP300N

    When connecting to my home network to an HP Pavilion a250n under XP pro using the WMP300N, I can see and access the other computers on my home network (including another wireless computer running vista), but none of them can access this computer. When I wired this computer through the internal LAN port command, the other networded, computers can access the sharing of files very well. The network router is a WRT300N. Is the problem with WMP300N or the router, and you have any suggestions on how to fix it?

    When you connect the computer to the network using the WMP300N, check if the other computers can ping this computer. Maybe the firewall (Windows Firewall, antivirus, etc.) has been activated on the map only wireless network, just do a detailed audit and find out if it is the culprit.

    picoHat

    Home network and wireless network help

  • HP Pavilion Elite HPE: updated HP HD & tattoo MOBO

    I need to know if I can use a commercial Windows 7 on a new hard drive Version and not to worry about the tattoo?

    I'll use a full Windows 7 sales and not an OEM.

    Thank you

    Lapaki

    Hi Yes you can use a version of Windows on your laptop but OEM keys will not work after a hardware change. If this helped you to move a point Bravo showing support . Thank you

  • Need bios HP F.08 for my HP Pavilion TX2500z

    Hi, I have a HP Pavilion TX2500Z, I did an upgrade of the BIOS on the HP site and the problems started with a laptop. I updated the version of bios F.0F while my original version was F.08, now I don't have bios backup original, does anyone have or know where to take my F.08 version for my laptop.   Thank you very much

    Which leaves you little choice about your laptop.

    Find BIOS mod sites and ask if anyone has the BIOS version you're looking for your laptop.

    Replace the system board is probably the best option.  Make yourself is not the best choice because the BIOS should be tattooed with the same credentials that the current Board of Directors system.

    Having the BIOS chip replaced by a BIOS repair business seems not viable, because your description of the problem seems also that the failure of the video solution is a part of it.

    Replacement of the laptop is the other option.

    Best regards
    ERICO

  • I have a HP pavilion DM4 M #1165dx

    my current internal Harddrive is maxed out 500 looking for a 2 GB to that has a life decent speed, found this on Amazon (Samsung Seagate tab portable disk HARD SATA III 2.5 inches of Bare dimm (ST2000LM003) internal drive) also have 4 GB RAM installed, I was wondering what would be the best route to level it so? Thinking 8-16 GB

    Hi @LoganHickman,

    Welcome to the HP Forum! I'm happy that you've become a member of the HP Forum. It's such a wonderful site to find answers and advice. Here is a link to guide you to what the most rewarding experience and answer questions about the display: first time here? Learn how to publish and more.

    I understand that your 500 GB HARD disk is full and you want to install a larger drive and more ram.  Here is a link to HP Pavilion dm4 Entertainment PC Maintenance and Service of Guide. Please note Chapter 3, page 24, section 15 modules of memory and point 18 drives for replacements recommended for your system. Please be aware that the maximum memory is 8 GB. (found in Chapter 1, page 2, memory). As a 2 TB drive has not been tested in this model, the result is unknown.  This does not mean that it will not work, only that it is not a walk recommended and not supported by HP.

    Please click on the "Twww.Mountainview.rsb.qc.ca Up ' below to thank me for my efforts! If my post has addressed your query, please click the "accept as Solution" while other people who may have the same query, can find the answer more effectively. Thank you for participating in Forums of HP!

  • Request help second addition, internal hard drive [HP Pavilion Elite e9290f]

    Hello

    Quick question here. I am a music producer and you can always use a ton of extra space as some of my projects are 17 to 20 GB in size. My HP e9290f comes with a stock of 1 TB Seagate (I think) internal hard drive. I intend to add this DeckStar HGST hard 4 TB (7200 RPM)

    However, I am not sure, if this drive is compatible with my computer. I talked about the upgrade & maintenance manual but inside, he tells me only how to replace the current internal hard drive. The addition of this amount of space external hard drive is not an option since all my ports are used by external hard drive! Can anyone shed light on what tools I need exactly to connect this HD extra 4TB? I would appreciate your answers, because time is of the essence

    HP Pavilion Elite e9290f | Intel Core i7 920 2.67 GHz | Windows 7 Ultimate 64 - bit Edition. 20 GB OF DDR3 SDRAM MEMORY | 1 TB of HDD at 7200 RPM. HARD drive external 2 TB | HARD drive 1 external to | HARD drive 640 GB external | HDD external 500 GB | NVIDIA GeForce GTX 260 1.8 GB | Audio interface Edirol FA-101 | Samsung 2493 HM 24 inches. Wide screen monitor |

    Hello

    I have not tested a HDD 4 TB on the motherboard of truckee. In theory, it should work as a data reader set shaped like a GPT disk.

    Another option if you don't want to take the risk is to install two hard drives of 2 TB. The one in the location empty in the cage from the hard drive and another in the optical drive Bay (if open) second.  You will need one 3.5 "to 5.25" adapter if you use the optical Bay.

    Check on the return policy for the 4 TB harddrive and see if your can return/exchange it if it doesn't work.  Kit retail for Hitachi 4TB has an optional driver if the motherboard of your PC will not format the drive completely outside up to 4 TB.

  • Pavilion 15: You can upgrade graphics on HP Pavilion?

    HP Pavilion Notebook-15-ab277cl (ENERGY STAR)

    Intel Core i7 - 5500U CPU @ 2.40 GHz 2.39

    x 64 processor

    1 TB harddrive

    HD screen

    WIndows 10 home

    NO pen or touch input

    Intel 5500 graphics card.

    I'm a great moment of gamer and wan't to know if I can get an external graphics card, or simply a new graphics card. Can I run something like Batllefront was good, but GTA5 is a very large and complex and my computer is struggling to make it. What can I do to make it work better?

    Hello

    No, unfortunately this is not an option for most laptops (could be more 95%) including your.

    Kind regards.

  • Upgading A Pavilion Elite HPE hard drive

    First off let me thank the guy who responds to this advance. It may be a few days before I have the chance again. Sometimes the unknown Warrior keyboard deserves a bit more then they get lol. So, thank you.

    I have a HP Pavilion Elite HPE. I just took my first slap to upgrade certain hardware and now I have a FEVER. I should have noted some things while I was there, but I was a little excited to get it working again. I noticed a few differences in my template to the list for the Pavilion Elite HPE, I found this site, but I should be able to answer your questions with a quick glance to see if it's right. HP presents my motherboard as "MS-7613 (lona-GL8E)" but I'm sure that my Board is a Foxconn version 1.01 Aloe with a 3.0 GHz AMD Phenom II x 4 processor.

    Then. Here's my question, can I put my 1 TB harddrive to two 2 TB drives? And you have any recommendations on which hard drive I use? I'm new at this and so I don't know I might miss information on this for you, but I think I can answer your questions on hard/software that I use.

    Thanks, Escar Frazzle.

    Pavilion Elite HPE (HPE-210y), AMD Phenom II x 4 3.0 GHz, 4 X 2 8 GB RAM, GeForce graphics 970, win 10

    You are welcome.

    First of all, here are the Product Specifications for the computer.  They show that the motherboard is made by Foxcom.

    The berries of units that are available are:

    Computer case

  • replacing the motherboard for hp pavilion

    I have a HP Pavilion model a4316f. The system no longer recognizes any of the readers. This system

    has a motherboard Violet 6 and from what I read in the forums, this is a common problem. If I replace

    the motherboard with another motherboard of violet 6 will be provided with recovery disks the

    system still works? If not, what are my options, do not want to buy the software after buying the motherboard

    for a 4 year old computer.

    Thank you

    You must send the motherboard to HP or an authorized service center for tattooing the BIOS/CMOS with your information system, if you want to use your HP recovery disks in the future.

    Alternatively, if you can still read the product key 25 character Windows on the Microsoft COA (see example below) attached to the computer, you can install Windows 7 using this key.

    Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer. Understand that this method will not contain any what customizations HP or HP software value-added.

    Windows 7 SP1 can be found HERE and HERE.

    Direct link to Windows 7 USB/DVD Download tool.

    Please consult your computer HP Pavilion a4316f Desktop PC drivers page for Windows 7 drivers. If you have any questions, locate the appropriate drivers, please message the Windows Device Manager (text only) "Hardware ID" of all remaining missing or unknown devices, as shown in the example below.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • HP Pavilion dv6700 FE811UA: alternative of the motherboard that supports windows 7 did not bound by windows vista

    I have what is essentially a hp notebook pc pavilion dv6985se.  The case is the special edition of the copper color model.  Motherboard of the laptop being (for lack of a better way to explain it), "tattooed" with windows vista, I tried to upgrade to Windows 7 Ultimate 64-bit sp1 and cannot until the date of windows despite many attempts troubleshooting update. So, my ultimate question is a motherboard more modern, say like the dv6163cl, I in a newer model specifications that I own.  FE11UA dv6700 in question here is a model I want to continue to use it in the hope of the upgrade that I need to upgrade THIS appliance that works?  Any suggestions would help me a lot in my choices as appropriate.

    Nothing I have with Windows 7 has updated since July 31, when the free Windows 10 took end. have you tried Autopatcher or WSUS Offline update tool?

    https://www.Raymond.CC/blog/offline-Windows-Update/

  • HP Pavilion Slimline S3614uk

    Hi, I got a HP Pavilion Slimline S3614uk I'm looking for a new motherboard can you please tell me what the motherboard model number so I can replace it

    Hello again... Here is a link to the surfer of part of HP for HP s3641uk and a link to the plug of the HP s3614uk. This system uses the same motherboard "Irvine GL6E", as the last system you posted questions about the uses. All the advice and the need to have tattooed it will apply.

    Part number: KQ511-69002

    Description: Card mother (System Board) - Irvine GL6E, mini-ITX form factor, measuring 170 x 170 mm (6.75 inches by 6.75 inches)

    Frank

  • HP Pavilion a6745f corroded capacitors.

    Hey, guys.

    I have owned HP Pavilion a6745f since 2009, and it is served every day since.  I have a big thing for her; the only thing I added was an AMD Radeon GPU 6570 just now.

    For these last days, I noticed a weird behavior, as my mouse and keyboard would randomly stops working.

    Someone told me to check the capacitors of the card from my mother and I noticed that on 6 capacitors aligned next to the CPU are corroded on the top.

    How can I fix?  Is it possible to fix it?  I'm told to HP motherboards are exclusive and cannot be easily replaced?  Then what should I do to save this computer?

    Thank you.

    Edit: Imeant 6570!  Sorry!

    Hello there HaganeSteel! : I'm about to bring you some bad new motherboard of your computer has died or is about to because of these capacitors.

    Unfortunately from time to time it happens like a bad disease that is Terminal

    The only cure is to go for the HP store parts & order a new motherboard in this way, the computer will it is even one "tattoo" that your love of media recovery because that's how your PC back to normal

    2nd most common method is to get a new motherboard from Asus, MSI etc. also you will need a new case & PSU so

    then reinstall your wear in the new MB & cases, you will need to obtain the commercial Windows version because the recovery disks work finally you will need to download all the drivers that you must have to make it operational.

    the good thing is that you will have state-of-the-art stuff if you go this route

    I had the same situation happen to me in January 2008, when I had a made-to-measure machine Xion-MSI bitten the dust because of these two bad MB so that an MSI GeForce 6700 bad video card a consolation is that now I'm running a real tank M1A2 in my 2011 Pavilion HPE 410.

    hope this enlightens clarifies & helps you

    I grieve as well as 'feel your pain '.

    Good luck

    spacechild

  • HP Pavilion dv7-1285 x noteboo: upgrade of the chip

    Is it possible tto upgraded the video chip to a newer version in existing specifications.  This laptop was classified, upwards, to windows 7 and does not have a compatible system of looking.  TI particaaly only works right now.  Do nor the heart Control Panel and cannot access a HDMI device.  or the second monitor.

    HP Pavilion dv7-1285 x Harddrive has been changed to the former owner

    It is not impossible that the video chip has gone wrong. The video with nVidia dv7-1000 series has a bit of history of the failures of the video chip.

Maybe you are looking for

  • What dangerous content is blocked on this site secure?

    On some websites (SSL), see some dangerous content is blocked. But I can't get any information on the blocked content. What content is blocked? Y at - it a plugin where I can see a list of this content? Thanx Jeroen

  • Remote control driver

    Hello I have a dv5-1000us and after you have reinstalled windows, I lost a lot of pilots. The only one, I'm still missing is the driver for the remote is shipped with my laptop so I can control my laptop by far. I have Vista Ultimate (x 32). I posted

  • Where to find drivers for Vista for Satellite Pro L40 - 18W

    Hallo I installed Vista on this laptop, but get drivers because it is really hard. Download speed of [HERE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=SUPPORT_PORTAL] is very slow. Is there another wa

  • Satellite A505 wake mode standby automatically

    I usually just close the lid on my Satellite A505 when I actually use it for a while, in order to put him to sleep, to rest it and save energy. However, I often find that for some reason, he wakes up on his own.I find with the cover still down, but f

  • problem reading DAQmx using Measurement Studio 2010 (even with examples OR)

    Hi all I'm reading the voltage using a map of NOR-DAQ-6211 with Measurement Studio 2010 SP1 V9.1.0.204. using Visual Basic .net 2010.When I create the task of data acquisition with the measurement studio Wizard, (Assistant DAQ) everything works fine.