Pavilion dm4-1160us, fingerprint digital driver/software for windows8

Similar Questions

• No HDMI audio on TV - Pavilion dm4-1160us Entertainment Notebook

  I know there are a lot of post on this issue, but nothing works for me.  I have a Pavilion dm4-1160us entertainment laptop running windows 7 64 bit.  I uninstalled the drivers both graphics and chip and reinstalled (warning says that I was installing was older than the one I had).  Maybe I'm not find the correct drivers to install. There is no audio device HDMI registered on the machine. AUDO devices listed are: IDT High Definition Audio CODEC for speakers and headphones.

  Hello

  My suggestion:

  • Go to this site to download the required driver.
  • Completely uninstall the Audio driver.
  • Install driver from the downloaded file.
  • Turn off the TV and the laptop.
  • Connect the HDMI cable.
  • Start by turning on the TV.
  • Turn on the laptop.

  Concerning

  PS many users have to do some testing and it turns ụp

• HP Pavilion DM4 1160us - blue screen with rays of light from above

  HP Pavilion DM4 1160us running Windows 7 Home Edition

  I was logged off system and on the rear connection, slider received rotation that never finished, connect.  EU force power off.  (When you start the system, received option 1) attempt to recover or 2) start as usual (same results for both).  Seemed to start as normal - then a progress bar display "loading files" - followed by blue screen (and big arrow cursor) - quick flash of a (too fast to read) command window.  The hard drive activity light was on during a few seconds, the flicker for several times, then went.  Nothing would happen ever after that it and the blue screen remained.

  I also ran well to launch HD diagnostic tests - he failed the extended test.  I removed the original drive Toshiba MK5056GSY and replaced by a 32 GB drive my old Dell Inspiron came with, run installation of a new operating system and the HP boot works fine (less the HP drivers).

  I have not yet tested the "faulty" drive but will be when I get an external hard drive case.  It lasted exactly 3 years.

  I would replace the drive with a WD7500BPKT drive that is 750 GB.

  My question is ' the computer/motherboard/BIOS Board will manage the bigger drive?

  A 750 GB hard drive should work fine.

• HP Pavilion dm4-1160us

  The laptop that I use is Hp Pavilion dm4-1160us. I used the Recovery Manager because my system was very slow. After my system became fast. But I am not able to connect to the internet. I am not able to access the internet. I use the cable to connect to the internet. the cable works fine. a Red Cross is visible on internet connectivity. Please someone help me please

  OS-WINDOWS7

  product name - HP PAVILION dm4-1160us

  Hello

  You have a few options.

  (1) download the driver from the support portal web for your laptop on HP servers and install it.

  (2) use your recovery disk to install the driver from the recovery of the value Manager

  (3) install the driver of Windows using the Recovery Manager. The Recovery Manager a fresh copies of all the original drivers ready for installation.  I think it's simpler and more direct option.

  In Windows:

  Start all programs-->--> HP--> Recovery Manager

  

  

  

  Scroll through the list and use your cursor to highlight. Click Next and leave the Recovery Manager install for you.

  The next time your laptop seems a little slow try a different method. Open the HP Support Assistant and select keep. Select the update option and run irt. That should bring your laptop back up to speed. HP Recovery to return using your laptop on the way it was when you bought is a bit exaggerated. Why use an extreme method when a good method of tweaking your laptop OS has already been provided for your use of HP?

• I want to work on the band 5 GHz with my wireless router. on my HP Pavilion dm4-1160us

  I have a:

  HP Pavilion dm4-1160us laptop

  Internal network card Intel WiFi Link 1000 bgn

  Windows 7 Professional 64-bit operating system

  Netgear n600 WNDR (Premium Edition) 3800-100nas wireless router

  It works fine on the 2.4 ghz band as it should be, but I'd like to replace the network adapter with dual-band to work on the 5 GHz band card to up to 300 or 450 Mbps.

  What are my options

  TX

  Dave LeBlanc

  ldavid wrote:

  I learned in the past by people of varying degrees of knowledge, I can't just change the map.

  Is this true? I have to go in the Bios?

  Thank you

  Dave

  That's right, that's why I posted the link to a service guide for the laptop. The map is mentioned in this manual, so no BIOS modding is needed. There are 2 compatible adapters, but Intel is better than Broadcom...

• HP PAVILION DM4-1160US screen is compatible with a HP PAVILION DM4-1164NR?

  I own a HP PAVILION DM4-1164NR and the screen is broken.  I'm looking to replace as well as the best deals/more easily available screens I can find are for a HP PAVILION DM4-1160US screen.  This form is not compatible with my laptop? They both seem to have the same characteristics and everythign online, but I have read that when the screen is connected is where a problem may occur with different types of screens.

  The replacement screens I have seen available to the dm4 uses a 40 led connector pin. the only thing you need to do of course new screen has the same size, resolution and backlight type as your old.

  The screens are not expensive if you shop wisely for a new one with a warranty and the best price.  This online seller is $55-60, 00 USD.

  Best regards

  ERICO

• Where can I get the driver/software for Satellite A500/02J disc

  Hello

  Newbie here, just want to ask, are there at - there a driver/software for laptop Toshiba A500/02J disc.
  I just bought a new and its been not formatted, so no recovery partition where drivers would be.

  I searched the net looking for face recognization software, etc., but nothing works.
  There must be a drive to install there somewhere...

  Can someone help a newbie?

  Concerning
  Carl

  Hello

  The laptop has not been handed over with the recovery disk because there is a pre-installed tool called Toshiba Recovery Disk Creator.
  This software could create the recovery disk that allows the laptop to factory settings still.

  By the way; Satellite A500/02J is an Australian for Toshiba laptop model and drivers must be available on the Australian Toshiba page:

  http://www.MyToshiba.com.au/home

  Welcome them

• When I install memory in my hp pavilion dm4-1160us why can't not start Windows?

  Current running Windows 7 Home Premium, 64 bit, Version 6.1.7601 Service Pack 1 Build 7601

  HP Pavilion dm4-1160us XH124UA PN #ABA

  Processor Intel (r) Core i5 CPU M 450 @ 2.40 GHz, 2400 Mhz, 2 Lossnay, 4 logical processors

  BIOS Version/Date Hewlett-Packard F.27, 21/12/2011

  Installed 2 4 GB DDR3 10600, 1333 MHz SODIMM

  Windows does not start. I tried using 1 stick at a time to see if it was bad, still does not start. I reinstalled the 2 sticks of 2 GB and it started off very well.

  Some DDR3-1333 is low voltage 1.35 volts and you need 1.5 volt memory. Also look at configuring physical chips existing fo... black blocks on one side or both sides? 2 rows of blocks or one? Try to match as closely as possible.

• HP pavilion dm4-1160us: version of windows is more recomendable para esta laptop?

  Operating system are recomendable para esta laptop

  HP pavilion dm4-1160us

  4 GB of ram

  Intel i5 processor

  Thanks to photos of

  Hello:

  Your laptop is designed to run on Windows 7 64 bit.

  HP does not support your laptop from any other operating system.

• Windows needs to install driver software for your DCC

  I installed the double mod. Windows Vista Ultimate & windows 8.1. When I started to pass on my laptop running windows Vista, it takes 5 minutes to open a session and message displays Windows needs to install driver software for your model of control abstract CDC (ACM)

  I don't understand how I can solve this problem.

  Thank you

  Try this link.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20driver%20SOFTWARE%20CDC%20abstract%20control%20model%20$ $ACM & ac = 5 #refinementChanges = & pageNumber = 1 & showMore = false

  In addition, with some PCs, you can select boot options, with dell, the F12 key to start the pc. Also, try this link for dual

  Starting the OS.

  https://social.technet.Microsoft.com/search/en-us?query=dual%20mode%20pc%20startup&AC=6#refinementChanges=60&PageNumber=1&showMore=false

• Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file.

  Original title: Windows encountered a problem installing the software driver for your device...

  Arrrrgh!  Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.

  I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "

  The job of printer/copier/fax end but not go on the scanner.

  I tried the 'fixes' to epson.com repeatedly with no luck.  This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.

  I ran the program to 'fix' Microsoft ATS with no luck.  It has detected the error and said that the problem has been resolved, but guess what?  No, it isn't.

  I clicked on install update driver/driver from Device Manager.

  I tried the work around, eliminating the "LowerFilters" of the registry.  Guess what?  You have it, no luck.

  So, before I go and buy a new printer/scanner, with no guarantee that they will work.  Does anyone have another suggestion?

  I am running Vista, 32-bit.

  You can also try and replace or install the ntprint.inf file.

  I had a similar problem on a Windows 7 PC and noticed that this file was not present.  I just copied the file from a different PC Win7.  The printer, I tried to install was a Brother MFC-J410w.

  The file can be found here C:\Windows\inf

  Hope this helps someone.

• Windows could not install your (CEWL 1) not found driver software for your device

  After you download sony_tvupdate_2012_1158_ucf_auth

  A new folder will be created called sony_dtv026000066006_00000301

  Inserted UWA - BR100 and received the following:

  Windows needs to install driver software for your (CEWL 1)

  Locate and install driver software (recommended)

  C:\Windows\system32\new dev.exe

  Windows could not install your (CEWL 1)

  Check the support section for driver software

  Insertion of USB causes the following message: not found driver software for your device

  Hello
   
   
  I would suggest trying the following methods and check.
   
   
  Method 1:
  Tips for solving common driver problems.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems    
   
   
  Method 2:
  Download the driver on the device manufacturer's website and install on your computer by keeping the computer in a clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

   
   
  You can also refer to:
  Update a hardware driver that is not working properly. http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

• Receive the following error: Windows found driver software for your device, but encountered an error so as to install it.

  The following message please just explain?-Windows found driver software for your device, but encountered an error so that to install it. - is - Intel(r) 82566DC Gigabit Network Connection - then he says:-this device cannot start. (Code 10) What this means and how it effects the operation of the computer?-under material network compatible two adapters are mentioned-1. Intel(r) 82566DC Gigabit Network Connection (intel) and 2. Intel(r) 82566DC Gigabit Network Connection(Microsoft)

  Hi Mohan kumar,

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you try the steps in the Microsoft Knowledge Base article mentioned below for you receive the error message:

   

  Windows found driver software for your device but encountered an error trying to install it. Setting is incorrect.

  http://support.Microsoft.com/kb/940267

   

  Method 2: You can also view the article in the Microsoft Knowledge Base for instructions on fixing the code 10 error messages:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Let us know if that helps.

• Can not find the driver software for your device

  I have Windows Vista Home Premium (64-bit) SP2.
  Had a card just before SCSI Adaptec AHA-2940U/UW working in XP the operating system upgrade.

  -System sees this controller in Device Manager
  -Adaptec has Vista drivers download (32 - bit, 64 - bit no)
  -Downloaded the drivers on my pc and extracts into a folder
  -Open the Device Manager and click on update drivers for this device
  -Made to the location of the new drivers and tried to install

  The results of action in this post:
  "Windows could not find driver software for your device".

  I do not understand 32 bit vs 64 bit one nonsense, but I installed many programs, which are almost 32-bit without any effort.

  Is there a compatibility mode for the drivers?
  How can I get through this?

  Should the real name of the device (AHA-2940UW) be in the list of official feature of Vista to install it?
  (i.e. If I were to add a device and choose the category manually storage controllers, it has a lot of Adaptec products in it, but not mine.)
  If this is the case, is there a way to add the device manually to Vista?

  The SCSI controller has a single function, driving my Microtek scanner, which is so well built and reliable I can't part with him. :-)

  Thanks mucho in advance for one of your tips and tricks.

  No drivers available for Vista 64, I'm afraid.

  And no compatibility mode for drivers.

  Sorry

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.