Definition of Auto-Configuration Wireless on laptop
The only way I can connect my laptop to my NetGear router must run Microsoft Fixit50469 v2.1.3.2 whenever I start my computer. Anyway to fix permanently everything which is the Fixit 50469 fulfillment?
Hello
Go to the properties of the network card WIRED on the power management tab, uncheck the box "allow the computer to turn off this device to save power".
The cause of this is the Wireless Zero Configuration (WZC) service. This feature, enabled by default in Windows XP Service Pack 3, is designed to optimize the use of wireless network technology in constantly looking for other wireless networks. This process has been known to cause clients to randomly drop their Wi - Fi connection. The best method to alleviate this problem is to use third party software to manage your wireless connection. This software will almost always receive with the driver for the wireless card you are using. Once you have this software installed, you want to disable the automatic configuration service to prevent it to load at startup.
1. 'change advanced settings' in the wireless network connection dialog box
2. in the tab "wireless", select the network and click Advanced.
3. change a random setting
4. click on OK and OK
5. step 1 and 2 once again
6. restore the random setting
In addition, refer to this links:
Random wireless network disconnect
http://support.Microsoft.com/kb/910387/en-us
Hope this helpful Information.
Chebli. J
Tags: Windows
Similar Questions
-
original title: cannot start service autoconfiguration WLAN and EAP services
I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."
I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.
I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.
When I tried to start the WLAN auto configuration service, I get the following error...
Windows could not start the service WLAN autoconfiguration on Local computer.
Error 1068: The dependency service or group could start.When I tried to start the service of Extensible Authentication Protocol, I get this error...
Windows could not start the service on Local computer Extensible Authentication Protocol.
Error 1053: The service did not demand launch or timely control.I searched the internet for the solution madly before posting here. Any help is greatly appreciated!
Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921
This link has the solution that worked for me.
-
HP Probook 450 G1: What is the compatible RAM configuration for my laptop?
Product number: F6B14PA ##ACJ
Serial number: (deleted content)
I'm from the India. I need to upgrade the RAM for my laptop. I'm looking for 4 GB of RAM of 4 GB existing upgradation. I need while seeking in the online market. What is the configuration of my laptop RAM. I need help for that matter. Please help me.
Another issue is that there will be no problem if there are different volts at the two RAMS cards in slots
If you associate brands and densities (single and double face) then you run in a greater chance of the laptop won't start.
That is why it is deemed be advised to always identical (in all respects) modules when you upgrade memory in a laptop ofr desktop PC.
-
Can I configure wireless mg3122 without installation disc printer?
I recently moved and have lost the installation disc for my MG3122 printer. Can it be configured without it to use wireless without it or where I can get another copy of the installation disc? Any help would be greatly appreciated. Thank you
Hi glass9711,
The printer can be configured wireless using the latest drivers on the Canon USA site. So we can provide you with instructions to download the drivers for your computer, please answer with this operating system you have (Windows or Mac OS X version).
We look forward to hear from you!
If it is a question of time-sensitive, additional support options are available to contact us.
-
Windows Vista not installed or configured wireless adapter.
In windows Vista, after a new new installed, I can connect is the internet.
Windows cannot find any networks to connect, if I can connect to internet with my other computer.
When I ask to "Diagnose why Windows cannot find any network" he said that this computer does not have an installed and configured wireless network adapter.
The wireless worked well until I reinstalled windows.
I could use another computer to download all software/drivers related to WIFI from the Web from Toshiba site after entering in my specific computer, and I installed it all. This solved my problem. Thanks for the help.
-
my computer does not have an installed and configured wireless network adapter
I just installed a new hard drive on my computer of dell inspiron 1525. I am not very computer but I managed to do it and it works. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However, I can't connect to the internet. He always tells me that I have not installed and configured wireless network card. When I go into computer management, there is no network adapter. There are "other devices" which device base system list three times with properties that say that the drivers for this device are not installed (code 28) but it won't let you not reinstall drivers and to be honest, I don't even know what the "other devices". There is also an ethernet controller that says the same thing. A network controller and the properties say he has not configured corr. (code 1) but won allow you to install because windows cannot find the driver for the device. He says that if you know the FAB of the device, you can visit the site Web-manufacturer of this device? As you can see, I'm not very computer. So, how can I connect to the internet. I have Verizon wireless at home. Thank you.
well, I think that I thought about it. I right click on each of them separately, and I think I can have it now.
Thank you
-
Notification dll Configuration wireless
I get the following under section - Configuration Wireless - message notification dll is not registered program will not work correctly. What does that mean? What should I do?
did what was asked and nothing, NADA. typed Regsvr32 wltrynt.dll wonder where was the Send button. do anything about anything to what has been typed. He just sat there... got a button send here...
-
Fate of 16 stateful auto-configuration
Hi all
We have improved 11i instance to R12.2 [E48834-03] on Linux 64-bit
All the RPMS installed according to the doc: Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.2) for Linux x 86-64 (Doc ID 1330701.1()
Once American English driver finished patch, we have enabled auto config in db node.
When we run the autoconfig it is completed with errors in level Apps.
The newspaper showing errors such as file:
ERROR on line 1:
ORA-00955: name is already used by an existing object
ORA-06512: at the 'APPS '. ADX_PRF_PKG', line 83
ORA-01403: no data found
ORA-06512: at line 6
Creation of the BCD file...
Application server ID already exists for this host - loading...
ADD executed successfully - /ebiz/apps/fs1/inst/apps/VIS_r122/appl/fnd/12.0.0/secure/vis.dbc
Authentication server security update
java.sql.SQLRecoverableException: IO Error: Invalid number format for the port number
Failed to connect to the jdbc:oracle:thin:@host_name:port_number:database database
Update of security authentication server failed with exit code 1
Restoration of DBC file saved to the location /ebiz/apps/fs1/inst/apps/VIS_r122/appltmp/TXK/VIS_Thu_Mar_27_18_33_2014.dbc
adgendbc.sh ended at Thu Mar 27 18:33:48 IST 2014
adgendbc.sh out with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
afwebprf. SQL INSTE8_PRF 1 amscmprf. SQL INSTE8_PRF 1 amswebprf. SQL INSTE8_PRF 1 clnadmprf. SQL INSTE8_PRF 1 cncmprf. SQL INSTE8_PRF 1 cseadmprf. SQL INSTE8_PRF 1 csfadmprf. SQL INSTE8_PRF 1 csiadmprf. SQL INSTE8_PRF 1 eamadmprf. SQL INSTE8_PRF 1 fteadmprf. SQL INSTE8_PRF 1 oksfrmprf. SQL INSTE8_PRF 1 wshadmprf. SQL INSTE8_PRF 1 Directory: / ebiz/apps/fs1/inst/apps/VIS_r122/admin/install afadmprf.sh INSTE8_PRF 1 afcpgsm.sh INSTE8_PRF 1 ibywebprf.sh INSTE8_PRF 1 Fate of 16 stateful auto-configuration
Please suggest
Thank you
Shaik
Hi all
We have fixed the problem.
Delete the ADX_PRE_AUTOCONFIG table in the applsys and run the automatic configuration.
Table ADX_PRE_AUTOCONFIG will recreate by autoconfig.
Thank you
Shaik
-
RC-50014: Fatal: failed to run the auto configuration service
Hi all
We are cloning Oracle 11i production applications. It is a 3-tier application that DB is hosted on a node, simultaneously on other applications on 3rd node.
The database has cloned successfully during the operation of the adconfig to the node at the same time we are facing problem.
We get below error.
RC-50014: Fatal: failed to run the auto configuration service
script gave:
****************************************************igccmprf.sh started at Wed Jan 28 03:27:44 CST 2014
The environment settings are...ORACLE_HOME: /phdfci/oracle/phdfciora/8.0.6
ORACLE_SID:
TWO_TASK: PHDFCI
Path: /phdfci/oracle/phdfciora/iAS/Apache/perl/bin:/phdfci/oracle/phdfciora/8.0.6/bin:/phdfci/oracle/phdfciappl/fnd/11.5.0/bin:/phdfci
/Oracle/phdfciappl/ad/11.5.0/bin:/usr/java14/bin:/phdfci/Oracle/phdfcicomn/util/unzip/unzip::/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/bin:/usr/ccs/bin
: / usr/sbin: / phdfci/oracle/phdfcicomn/clone/bin /... /JRE/JRE/bin:/phdfci/Oracle/phdfciora/IAS/apache/perl/bin:/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/ja
VA14/bin:/phdfci/Oracle/phdfcicomn/util/unzip/unzip:/phdfci/Oracle/phdfciora/8.0.6/bin:/usr/bin:/usr/ccs/bin:/usr/sbin:/usr/java14_64/bin:/usr/VAC/bi
n: / usr/bin: / etc: / usr/sbin: / usr/ucb: / home/apchdfci/bin: / usr/bin / X 11: / sbin:
LD_LIBRARY_PATH: /phdfci/oracle/phdfciora/8.0.6/network/jre11/lib/aix/native_threads:/phdfci/oracle/phdfciappl/cz/11.5.0/bin:/phdfci/oracle/phdfc
IOra/8.0.6/lib:/usr/DT/lib:/usr/openwin/libExecutable: /phdfci/oracle/phdfciora/8.0.6/bin/sqlplus
SQL * more: version 8.0.6.0.0 - Production on Tue Jan 28 03:27:45 2014(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter the value 1: enter the value 2: enter the value 3: enter the value of 4: connected.
Cannot create a hold file.
Disconnected from the database to Oracle 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
igccmprf.sh out with status 1
ERRORCODE = 1 ERRORCODE_END
.end std out.
The o/s message: no such file or directory.end err out.
****************************************************
Product Top pilots executed: AD_TOP FND_TOP ICX_TOP IEO_TOP ABM_TOP ECX_TOP BIS_TOP GL_TOP AMS_TOP CCT_TOP WSH_TOP CLN_TOP OKE_TOP OKL
_TOP OKS_TOP CSF_TOP XNC_TOP IGS_TOP IBY_TOP PA_TOP JTF_TOP MWA_TOP CN_TOP CSI_TOP WIP_TOP CSE_TOP EAM_TOP IMT_TOP FTE_TOP ONT_TOP HAS
R_TOP AHL_TOP OZF_TOP IES_TOP CSD_TOP IGC_TOP
[AutoConfig error report]
The following report lists the errors autoconfig met in each
execution phase. Errors are grouped by directory and by phase.
The format of the report is:
< file name > < phase > < eventually return code >[INSTALLATION STAGE]
AutoConfig could not successfully run the following scripts:
Directory: / phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
adgendbc.sh INSTE8_SETUP 1afcpnode.sh INSTE8_SETUP 1
txkWfClone.sh INSTALL_SETUP 1[PROFILE PHASE]
AutoConfig could not successfully run the following scripts:
Directory: / phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
adadmprf.sh INSTE8_PRF 1
afadmprf.sh INSTE8_PRF 1
afcpgsm.sh INSTE8_PRF 1
ahladmprf.sh INSTE8_PRF 1
amscmprf.sh INSTE8_PRF 1
aradmprf.sh INSTE8_PRF 1
clnadmprf.sh INSTE8_PRF 1
cnadmprf.sh INSTE8_PRF 1
cncmprf.sh INSTE8_PRF 1
csdadmprf.sh INSTE8_PRF 1
cseadmprf.sh INSTE8_PRF 1
csfagprf.sh INSTE8_PRF 1
csiadmprf.sh INSTE8_PRF 1
eamadmprf.sh INSTE8_PRF 1
fteadmprf.sh INSTE8_PRF 1
gladmprf.sh INSTE8_PRF 1
igccmprf.sh INSTE8_PRF 1
jtfadmprf.sh INSTE8_PRF 1
okeadmprf.sh INSTE8_PRF 1
okladmprf.sh INSTE8_PRF 1
ontadmprf.sh INSTE8_PRF 1
paadmprf.sh INSTE8_PRF 1
txkJavaMailerCfg.sh INSTE8_PRF 1
txkWebServicescfg.sh INSTE8_PRF 1
wipadmprf.sh INSTE8_PRF 1
wshadmprf.sh INSTE8_PRF 1
xnccmprf.sh INSTE8_PRF 1[APPLY PHASE]
AutoConfig could not successfully run the following scripts:
Directory: / phdfci/oracle/phdfciora/iAS/Apache/perl/bin/perl-I /phdfci/oracle/phdfciora/iAS/Apache/perl/lib/5.00503-I/phdfci/oracle/phdfciora.
iAS/Apache/perl/lib/site_perl/5.005-je /phdfci/oracle/phdfciappl/au/11.5.0/perl/phdfci/oracle/phdfcicomn/admin/install/PHDFCI_fnclclcn1
adadmat.pl INSTE8_APPLY 1
adupdlobs.pl INSTE8_APPLY 1
Fate of 32 stateful auto-configurationRC-50014: Fatal: failed to run the auto configuration service
Asked by oracle.apps.ad.clone.ApplyApplTop
Env details-
Apps 11i version
Version of DB - 11.2.0.1
Help, please.
Thank you
Thanks for the update.
Problem is solved now.
In fact, is copies on PROD that did not exist on the server to clone.
-
hardware configuration recommended for laptop
I'm about to buy a new laptop. What is the optimal configuration of the laptop for the creative cloud? It must probably be Windows because that's what I have to work.
There is no single perfect configuration.
It depends on who the apps you use and how you will use them.
Most of the new laptops on the market will run most applications of cloud very well. But if you have specific requirements, then some adjustments may be needed.
Minimum system requirements for different applications are listed here:
System requirements | Creative cloud
Focus on applications such as Premiere Pro and After Effects (if any) and Photoshop (as appropriate).
-
Fate of 29 stateful auto-configuration
Dear experts,
Please note that Autoconfig on the layer of apps is out error.
[applmw@fusion 11141303] $ vi adconfig.log
amscmprf. SQL INSTE8_PRF 1
amswebprf. SQL INSTE8_PRF 1
bisadmprf. SQL INSTE8_PRF 1
bisdblrp. SQL INSTE8_PRF 1
clnadmprf. SQL INSTE8_PRF 1
cncmprf. SQL INSTE8_PRF 1
cseadmprf. SQL INSTE8_PRF 1
csfadmprf. SQL INSTE8_PRF 1
csiadmprf. SQL INSTE8_PRF 1
eamadmprf. SQL INSTE8_PRF 1
fteadmprf. SQL INSTE8_PRF 1
ibywebprf. SQL INSTE8_PRF 1
icxwebprf. SQL INSTE8_PRF 1
oksfrmprf. SQL INSTE8_PRF 1
wshadmprf. SQL INSTE8_PRF 1
Directory: / data/U03_MALAWI/d02/inst/apps/MWTEST_fusion/admin/install
adadmprf.sh INSTE8_PRF 1
afadmprf.sh INSTE8_PRF 1
afcpctx.sh INSTE8_PRF 1
afcpgsm.sh INSTE8_PRF 1
igccmprf.sh INSTE8_PRF 1
jtfictx.sh INSTE8_PRF 1
okladmprf.sh INSTE8_PRF 1
txkJavaMailerCfg.sh INSTE8_PRF 1
txkWebServicescfg.sh INSTE8_PRF 1
[APPLY PHASE]
AutoConfig could not successfully run the following scripts:
Directory: /data/U03_MALAWI/d02/apps/tech_st/10.1.3/perl/bin/perl-je /data/U03_MALAWI/d02/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/U03_MALAWI/d02/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/U03_MALAWI/d02/apps/apps_st/appl/au/12.0.0/perl-je /data/U03_MALAWI/d02/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi/data/U03_MALAWI/d02/inst/apps/MWTEST_fusion/admin/install
adadmat.pl INSTE8_APPLY 1
Fate of 29 stateful auto-configuration
Please notify.
Concerning
Mohammed Abdul MuqiitException occurred: java.sql.SQLException: ORA-01017: name of user and password invalid. connection refused
Please make sure you pass the password correct apps when you run the automatic configuration service.
Thank you
Hussein -
Hi all
I got following error while cloning an instance of R12 on HP UX.
After having copied from source to target, I ran perl adcfgclone.pl dbTechStack.
error...
Start the synchronization context file system and its models with those of the database
Database connection: impossible
Support changing context OAM function: unverified
Support OAM customization feature: unverified
File system model: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
.
.
.
No download file of context and its data base models. Connection to database failed
.
.
.
[AutoConfig error report]
The following report lists the errors autoconfig met in each
execution phase. Errors are grouped by directory and by phase.
The format of the report is:
< file name > < phase > < eventually return code >
[INSTANTIATE PHASE]
AutoConfig impossible successfully to instantiate the following files:
Directory: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/install/RSU_reeldev
adcrdb.sh INSTE8
Fate of automatic configuration with State 1
RC-50014: Fatal: failed to run the auto configuration service
Asked by oracle.apps.ad.clone.ApplyDBTechStack
Kind regards
Sandeep.Hi user;
Please check:
12 adcfgclone release fails with AC-00423, RC-50014 adcrdb.sh lack of filesystem [549872.1 ID]
RC-50004: Fatal: error occurred running adcfgclone.pl dbTier RDBMS 64 bit [336875.1 ID]It may be useful
Respect of
HELIOS -
Fate of 2 stateful auto-configuration
After configuring oracle10g RAC for 11i applications, executing db level ended with error adconfig.pl.
adconfig.log
---------------------------------------------------------------
ADX database utility
---------------------------------------------------------------
getConnection()->
sDbHost: sawadi
sDbDomain: muscat.org
sDbPort: 1521
sDbSid: MMAPPS_RAC1
sDbUser: apps
Try to connect using SID...
getConnectionUsingSID()->
JDBC URL: jdbc:oracle:thin:@sawadi.muscat.org:1521:MMAPPS_RAC1
Connection got
Database utility - ADX finished-
Checking the connection to the database: created
Restore the profile feature: disabled
No file recovery profile.
Restore the utility profile was properly executed
===========================================================================
[AutoConfig error report]
The following report lists the errors autoconfig met in each
execution phase. Errors are grouped by directory and by phase.
The format of the report is:
< file name > < phase > < eventually return code >
[INSTALLATION STAGE]
AutoConfig could not successfully run the following scripts:
Directory: usr - I have /usr/perl5/5.8.4/lib/sun4-solaris-64int-j'ai /usr/perl5/5.8.4/lib-je /usr/perl5/site_perl/5.8.4/sun4-solaris-64int-je /usr/perl5/site_perl/5.8.4-je/usr/perl5/site_perl-I /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int-j'ai /usr/perl5/vendor_perl/5.8.4-j'ai/usr/perl5/vendor_perl-I. -I /u01/mmapps/mmappsdb/10.2.0/appsutil/perl-je /u01/mmapps/mmappsdb/10.2.0/appsutil/perl /u01/mmapps/mmappsdb/10.2.0/appsutil/scripts/MMAPPS_RAC1_sawadi
adchknls.pl INSTE8_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully run the following scripts:
Directory: /u01/mmapps/mmappsdb/10.2.0/appsutil/install/MMAPPS_RAC1_sawadi
afdbprf.sh INSTE8_PRF 1
Fate of 2 stateful auto-configurationHello
It goes the same for 10.2.0.2; the nls/data/9idata should be presented in your instance - see (Note: 362203.1 - version of Oracle Applications 11i with Oracle 10 g Release 2 (10.2.0)).
Kind regards
Hussein -
Wireless Auto configuration does not work after that manual set up
Wireless Zero Configuration (WZC) stopped working on my computer at random. I went online found some resources how to click Run, put in a formula and get it up and running again. It worked... once. When I turned off my computer and turned it back the next day, WZC did not work again, so I went through the whole process, once again, but now it doesn't work at all. I guess I should just uninstall and reinstall the Configuration automatic service, but I assure you that I do things. Can someone help me if I can do my work on my computer again? Thank you
Yes, it's the process that I have lived, more than 15 times. When you make my hours of searching, he had 3 different codes to use when using:
Start > run
1 %SystemRoot%\system32\services.msc/s
2 ncpa.cpl
3, sysdm.cpl
Regarding the third party... my laptop is very old, but I took good care of her. This issue is literally something that started when I turned it on. Wi - Fi, I have a "Broadcom" symbol (which was always there) in my quick launch. Other than that there is no component of third-party wireless known on my computer.
The command symbol Broadcom wireless utility IS a third party. Although you can have the icon in the notification area since you had the computer, it must have been turned off and is now activated. Either click or right-click on the icon of Broadcom and see if you can find a section 'options' or 'preferences' which will allow you to disable for Windows order your wireless card.
-
Wireless Auto configuration will NOT be enabled.
Hello
Earlier today, that I made the mistake of clicking on my Dell WLAN wireless network icon thus enabling and disabling my Wireless Zero Configuration. Immediately, I went to services.msc and WZC it again but I can't seem to get it remains activated. Once I restart my computer, automatic configuration is disabled. I disabled Broadcom in my Start Menu. I added to the .bat file according to the instructions, I read (see below), and it still does not work! Already both WZC and WLAN Dell appeared simultaneously in my Start menu without interfering Dell. Now, I can't even stay WZC. Someone please help! I want to use WZC.
4. use Notepad to create the following batch file:
off @echo
c:\documents and Settings\Votre CD name name\
Start wzcsvc sc config = auto &
SC start wzcsvc"your name" is the name that appears when you click on 'start '.
Save the file in c:\windows\system32 local disk
"Save the file with a file name that will make sense for you, with the extension".bat ".
Be sure to select "all files" on the next before clicking 'Save' fieldCopy this file and place it in your startup folder.
location of your startup folder.
local disk C:\document and settings\yourname\start demarrer\programmes\demarrage\In addition, both WZC and WLAN Dell were unable to detect the wireless network where I'm staying. The two WZC and Dell sense other, weaker networks without wire nearby but neither one of them show my wireless network. All other computers that visit this House has no bad, but mine doesn't. Any ideas? Thank you.
Hello
Read this, http://www.ezlan.net/infestation.html#startup
Use this utility to look at the startup and uncheck the entry that starts the Dell/Broadcom wireless utility.Otherwise, look at support page from Dell for your computer. If Dell of own drivers (no utility combo), download them.
Uninstall the Dell how utility that you install any program and update the card wireless with the downloaded drivers.
Here how to download drivers and unzip it to a folder of your choice.
In Device Manager, right-click on the adapter.
Click Update drivers and choose her browse my computer for drivers.
Choose let me a list of choices, click on disk and point to the folder with the drivers.
Jack-MVP Windows Networking. WWW.EZLAN.NET
Maybe you are looking for
-
Access denied you don't have permission to access the Apple Forum
This is the second time what is happening: I connect and if I'm changing the avatar in the communities of Apple Support, suddenly, I get this message Access denied You don't have permission to access the 'http://discussions.apple.com/welcome' on this
-
Hello I am trying to print the decimal number, but I've always had the decimal number (between-1 to 1) witout '0' or '-0 ". Var num:num = 0,235 MsgBox (num) her impression: ".." 235. Thank you
-
I want to get rid of the Manager on my computer. It happens every time I go on my emails and many other things and I want to be rid of it
-
Error on server IDS 4215 TLS certificate VEI
IDS 4215 5.0 software version not connect with IVE and IME server. "" IOException when trying to get the certificate: java.security.cert.CertificateExpiredException. error message is displayed. How this can be solved?
-
BlackBerry Curve 8310 OS smartphone
Can I upgrade the operating system of 4.5 to 5.0?