Pavilion Elite 9120Y running Windows7 (64-bit) has frozen. BIOS does not detect not SATA.

Similar Questions

• I have a Pavilion Elite M9150F and it seems that the ignition button does not work. The power light is on

  My Pavilion Elite M9150F P/N KC880AA-ABA running Windows Vista Home Premium 32 bit. The device turns on no switch or remote control. He lite is turned on and power is running through the unit until button (checked through AC voltage detector) are there known issues with these? Are there spare parts? It doesn't hang or move the last time it was turned on. What are my options? Thanks for any help.

  Hello cello6996
  
  You are in warranty? If so, I would suggest contacting HP. If you are out of warranty, follow the steps below.
  
  How does a power button is essentially that it shorts two special pins. This short film is a signal to the power on the power supply and all components. A quick Google search reveals the most common method to do this is to disconnect the wires to the pins on the motherboard power button and then tap a screwdriver against just these two pins. Use gloves as a precaution. or a screwdriver with an insulated handle.
  How to bypass the power on button on pc
  Is there a way to bypass the power switch?
  
  If the computer starts correctly something wrong with the power button. If the problem persists, it is more than likely a problem with one of the hardware components and the problem will have to be isolated further. Let me know what happens.

• HP Pavilion g7-2325sb Windows 7 64-bit screen adjusting keys does not

  Hello

  I have a HP Pavilion g7-2325sb running Windows 7 64 bit. but the brightness of the screen buttons do not work.

  Audio control buttons work without pusshing the fn key.

  In the bios "action keys mode" is enabled.

  I think it's a missing software, but can't find the software, cannot "HP support assistant.

  Anyone knows where I can find the driver or is there another problem?

  Greetings,

  Thersko

  Hello:

  I can't find all the graphics drivers W7 from HP for the GPU.

  Use the AMD graphics driver and see if it works...

  http://support.AMD.com/en-us/download/mobile?OS=Windows%207%20-%2064

  Also use this software for the Fn keys...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-104698-1&cc=us&DLC=en&LC=en&OS=4063&product=5275619&sw_lang=

• Pavilion 17-f260nb: need drivers for Pavilion 17-f260nb for windows7 64-bit

  Hello again,

  I have a laptop of 17-f260nb Pavilion running windows7 64-bit.

  After borrow from someone I came with driver problems.

  I posted on this forum before last year, where wonderful people responded with links for the drivers, but the link no longer works.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/Pavilion-17-f260nb-downgrade-win...

  Can someone point me to the drivers, I need to use?

  USB does not work at the moment, and I see these hardwareid missing drivers

  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2294103C & REV_03
  PCI\VEN_8086 & DEV_9CB1 & SUBSYS_2294103C
  PCI\VEN_8086 & DEV_9CB1 & CC_0C0330
  PCI\VEN_8086 & DEV_9CB1 & CC_0C03

  Could also someone point me to a driverpage for which I can use the chipset & other drivers as well?

  Thank you all for your support.

  Kind regards

  E.P.

  Hello:

  Here is the link for the usb driver, you must... Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family?product=65855

  Now, as to why you couldn't find the drivers on your laptop support page...

  All the drivers, specifications and manuals are missing from pages support again.

  They have disappeared since Friday night.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  If all goes well, now that it's Monday, HP is going to move to fixing the real problem soon.

• laptop HP pavilion g6: ralink rt3290 802.11bgn wi - fi adapter problem does not not when turn on pc

  Hi iam using windows 8 64-bit HP pavilion g6 my adapter ralink rt3290 802.11 wifi bgn does not work for a few days because of the sudden closure of the pc by the battery problem, whenever it's strcuked reason more to heat or liquidated suddenly drops ralink adapter not worked for some time, now it not group days I updated my driver of latest vesion by the Device Manager in windows to the latest version still problem persists, I have to reinstall it

  Hi @eswar_krishna,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the wifi adapter. I'll be happy to help you.

  The following pages are useful for troubleshooting wireless connectivity problems.

  Troubleshooting wireless network and Internet (Windows 8)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Buffer SQL commands (get, run, save, etc.) in Developer SQL does not?

  I am a developer SQL 3.1.07.42 Windows 7 64 bit with java 1.7
  
  I have c:\test.sql that contains

  PROMPT Working

  and c:\testscript.sql that contains

  set echo on
  set serveroutput on
  /
  GET c:\test.sql
  SAVE c:\test_working.sql
  LIST 1 LAST
  RUN

  If I open a new worksheet and type:

  @\testscript.sql

  then press F5, I get:
  

  @\testscript.sql
  
  set serveroutput on
  
  /
  
  GET c:\test.sql
  
  SAVE c:\test_working.sql
  
  LIST 1 LAST
  
  RUN

  If the c:\test_working.sql is not created and the content of the script is not executed.
  
  What I am actually trying to do here (and maybe you guys have a better idea) is to capture the output of the sql command that appears on the client, send it to the server, treat it somehow and then do everything with her (she log in my case).
  
  For example (a very simple example from my scripts).

  spool c:\temporary.tmp
  create table test();
  spool off;
  
  get c:\temporary.tmp
  0 begin insert into logtable (msg) (trim('
  100 ')); end;
  
  save logit.sql
  
  @'logit.sql'

  the idea is to be able to save the output of any control block / anonymous plsql in a way that can be sent to the server for processing (this is for most mistakes, of course).
  I can intercept DBMS_OUTPUT turning SERVEROUTPUT then a DBMS_OUTPUT. ACTIVATE and finally using DBMS_OUTPUT. GET all the lines and the process/log them, but I have not found a way yet to catch the rest of the "TERMOUT' of treatment other than the queue, but even then, I couldn't find a way to get the local file (content) on the server; and this idea GET/SAVE/RUN appeared to be feasible but its does not work (I even tried interactively, but maybe I'm doing something wrong).
  
  Any ideas/suggestions on the topic are welcome.
  
  Thank you.

  Hello

  According to the 3.1.04.72 SQL Developer documentation, the "get" command (among others) is not supported:
  Help | Table of contents | SQL Developer concepts and use. With the help of the SQL worksheet | SQL * more supported and unsupported statement...

  If the options are limited. If sqlplus is available and use it as an "external" tool will not conflict entirely with local policy, these links may interest you:
  Re: sqlplus vs sqldeveloper
  Easy Connect and sqldev.conn issues

  Otherwise, you can add a feature request for this on the SQL Developer and see if such an improvement is a priority for the community.

  Kind regards
  Gary
  SQL development team

• HP pavilion x 360-11-n011si: BIOS does not boot form USB key to CD USB even when the value of UEFI to allow

  Hi all

  I have a laptop beatsaudio that has been upgraded to win10: the HARD drive failed and I replaced it with an SSD.

  The BIOS does not allow to boot from USB USB even when CD install to UEFI key.

  Any help will be appreciated

  Hello

  I realized a work around:

  Secure boot off

  Legacy support on

  and here's the big one

  Boot HDD in legacy should be last on the list

  The BIOS does not recognize that there is no. OS installed and continue to the next boot device as any other bios hp good done, it just stops putting so he can finally boot USB.

  Thank you

• Error - the computer is running an operating system Microsoft Dynamics CRM does not support for the installation of the Extension of reporting Dynamics CRM 2011.

  Original title: Dynamics CRM 2011 Extension of reporting facility.

  Nice day

  Asked me to install this program called Extension Microsoft Dynamics CRM 2011 report Authoring on one of our PC network operations.  The computer is a Dell OptiPlex 960 under Windows XP SP3.  When attempting to install the program, you get the following error message:

  The computer is running an operating system Microsoft Dynamics CRM does not support.  To install this product, you need to upgrade your computer to an operating system supported.  For a complete list of supported operating systems, see the documentation for Microsoft Dynamics CRM (http://go.microsoft.com/fwlink/?LinkID=181018)
  For additional detals see logfile C:\Documents and Settings\bcodom\Application Data\Microsoft\MSCRM\Logs\BIDSExtensionsSetup.log

  Now, normally, I just coordinates with the end-user to him upgrade to Windows 7, however, after watching on the download page of this application (http://www.microsoft.com/download/en/details.aspx?id=13818), I noticed that Windows XP is one of the supported operating systems that can be installed on.  In addition, after looking around on the Technet documentation, I was not given a definitive answer on whether or not this application is not supported on Windows XP.

  So, my question is creation of Microsoft Dynamics CRM 2011 report Extension works on Windows XP SP3, or do we let us upgrade this computer to Windows 7?  Thank you!

  Hi Bcodom,

  In dealing with the problem to install the Extension of Microsoft Dynamics CRM 2011 report creation, I would recommend you to post your question in the help link.

  http://social.Microsoft.com/forums/en/CRM/threads

  Hope the helps of information.

• I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect.

  I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect. I was told by the router (Belkin) manufacturer support there is a MS download XP patch so it will connect to my new wireless network. Where can I get it and what it is labeled?

  original title: wap encriptación

  Hello

  Maybe this can help.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3914

• Pavilion dv6 - 2138ca BIOS does not recognize mSata

  My son has this laptop and he tries to upgrade using an msata. This has been installed in the slot msata, but from the start, the BIOS laptop does not recognise andboots off the portable drive 2.5 inch (also a SSD). On enter in Windows 8, Disk Manager does not see the drive. I can only conclude that the BIOS has not considered or the other.

  In an article without report, we noticed that the BIOS does not recognize the wifi cards much either, but I'm not concerned about it at the moment. Just want the problem of msata. I mean what would the e point of having an msata slot if you could not use it right?

  kwernerus wrote:
  My son has this laptop and he tries to upgrade using an msata. This has been installed in the slot msata, but from the start, the BIOS laptop does not recognise andboots off the portable drive 2.5 inch (also a SSD). On enter in Windows 8, Disk Manager does not see the drive. I can only conclude that the BIOS has not considered or the other.

  In an article without report, we noticed that the BIOS does not recognize the wifi cards much either, but I'm not concerned about it at the moment. Just want the problem of msata. I mean what would the e point of having an msata slot if you could not use it right?

  Hello

  This site is NOT for an mSATA SSD. It's a location miniPCIe for a TV tuner. I saw some people modding the BIOS, it could be used as a slot mSATA, but I don't think it would work on your laptop. The only successful modding has been reported on some HP ENVY 15-3000 with generation processors Intel first. However, I can help you with the list of authorization for incompatible wifi. That can be removed and users can use any wireless card they want.

• I'm LR4 running on a pc. Control-Q does not close the program. (Sometimes it changes the selected color to b & w image.) I was closing the window by right-clicking on the LR icon in the taskbar and selecting "close window." Is - it really close the

  I'm LR4 running on a pc. Control-Q does not close the program. (Sometimes it changes the selected color to b & w image.) I was closing the window by right-clicking on the LR icon in the taskbar and selecting "close window." Is this really close the program? (It also changes an image n & b).

  -> Output file, or by clicking on the red X in the upper right, should work.

  CTRL-Q should work unless there is a Windows keyboard command that replaces it.

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• not able to uninstall Assistant support hp in hp pavilion g6 1301tx with windows7 64 bit os

  I have a little problem with my computer pavilion laptop g6 1301tx. I installed the new version of the hp support assistant in my lappy and it worked for a few days.

  One day, when I want to use assistant suport that it does not work and one assistant support window showing was arrested. So I tried to uninstall the software and I did it via Control Panel, he showed the uninstall is complete but the application is always present and it is not removed completely. Now I can't install hp support assistant.

  When I want to install it, again I am the guest below as crush or not?

  hp support assistant now not the list in the Control Panel then how to remove...

  Help me please...

  

  Hello

  Try the following.

  Unless you still have the installer, download the latest version of HP Support Assistant from the page on the link below - download links are to the bottom of the page - and Save the installer to your download folder.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  Then, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  Then, right click on the HPSA installer you download earlier, select Extract 7 - Zip, select the files, and then click Ok.  The newly extracted folder, right-click on UninstallHPSA and select "Run as Administrator" - you may well see no progress of this attempt uninstalling, then leave the laptop at idle for a good 10 minutes before restarting it.

  Open your download folder and delete the "record HPSA extracted" so you are just left with the original installer that you downloaded.

  Now run Microsoft 'Fixit' on the link below and use it to install the new version of HPSA.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Kind regards

  DP - K

• How to enable virtualization assisted by material on a Pavilion p7 - 1267c running win7 64-bit.

  I need to enable virtualization of hardware support on a Pavilion p7 - 1267 c running Win 7 64 bit.  I ran MS HAV detection tool and it said my computer supports HAV, but it is not enabled.  I ran the bios Setup, but there is nothing here of HAV.  Any ideas?

  Hello:

  Have you looked into the Security menu in the system (BIOS) configuration?

  In my view, that the setting are there.

  Please see this post below...

  http://h30434.www3.HP.com/T5/desktop-hardware/does-the-HP-P7-1267c-support-Intel-VT-x/m-p/1371649/highlight/true#M46262

  Paul

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.