Similar Questions

• Win xp and Win 7 compatibility problem

  I have a wireless modem and my desktop (win xp 32 bit) connected to the modem with wire; my hp laptop (windows 7 64 bit) is connected via the wireless connection. I can't see my desktop computer through my HP laptop with connection Wi - Fi. This means that I cannot see my desktop computer's shared files or cannot use a shared printer. But I do not see that shared files and shared use printer when I plug the lan cable to my laptop. İ would like to know if I can do something to fix this... Help, please...

  Hello:

  Have you appointed working groups the same for both PC?

  The name of default workgroup for XP is MSHOME and the name of W7 default task force's WORKING group. You must make sure that they are the same. Regardless of that you want to match the other change. You will need to restart the PC on which you changed the name of working group.

  You have enabled file and printer sharing on your PC?

  Have you disabled sharing protected by password in W7?

  Paul

• Pavilion g6 - 2318sr and win 7 drivers

  Hello, I have a problem with the installation of win 7 on my laptop.
  I bought with win8 pre-installed, but wanted it downgrade to win7.
  So the question is: where can I download drivers for my g6 - 2318sr?
  Download at hp.com page offers only win8 drivers...

  What can do me you advice?

  Thank you.

  Hello:

  This information allows to install W7 x 64...

  First, install the AMD chipset driver and restart.  The first file listed.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then, all the W7 x 64 drivers and software for this model should also work on your.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275619

• Pavilion dv6 - 1253cl and Win 7

  I installed Windows 7 on my Pavilion dv6 - 1253cl without problem until I had to use my printer HP C3150 all-in-one to scan a document. Now, I find that the HP Solution Center does not detect my printer. The printer works fine printing from applications, but when you try to scan from the solution center it does not detect the printer/scanner. Y at - it a update for the HP Solution Center work with Windows 7?  Thank you.

  There is a Windows 7 compatible driver for your printer. You can download it from the following link:

  FTP://ftp.HP.com/pub/softlib/software11/COL30154/MP-74950-2/AIO_CDA_NonNet_Full_Win_WW_130_140.exe

• Pavilion hpe-112y: I have a hp Pavilion hpe-112y and would like to find the firewire port

  I have a hp Pavilion hpe-112y and would like to find the firewire port

  Looking at the back - #4 is the firewire port

  

• Supported and compatibility against Win Server 2008R2 and Win Server 2012R2

  Hey VMware,

  I'm looking for some information like support and compatibility of the product for Win Server 2008R2 and Win Server 2012R2 platforms below.

  Here is the application name and version:

  VMware vSphere Client 4.1.0.32733

  VMware vSphere Client 4.1.0.17435

  VMware vSphere Client 4.1.0.14766

  VMware vSphere Client 4.1.0.12319

  VMware vSphere Client 4.1.0.34274

  Please provide the results of the support and compatibility for above mentioned OS platforms, also you can provide details if all other support/contact channels are available.

  Thanks in advance.

  VMware KB: Supported operating systems hosts for vSphere Client (Windows) installation

• Pavilion 1301tx g6: 10 windows upgrade compatibility

  First of all, I really want to try the new windows 10. I use windows 7 Professional for hp pavilion 1301tx g6 and it's grahics driver amd hd 7450 m. My question is if I upgrade my laptop for windows 10, will be this driver it is necessary for the new operating system? Let me rephrase the question, can I get the graphics driver to my laptop for windows 10? Ireally wantto besure as to its compatibility. With my other laptop sony vaio, I tried to install the new os and I get BSD. They (CC) said the graphics driver is not compatible, but when I click on the logo of small windows on the bar he spots says your pc is compatible. This time I really want to be sure as to its compatibility. Please help me in this matter.

  @SBKH: Unfortunately, there is no HP Win10 driver for your device. HP is not no matter what timetable indicating when, or IF, they will produce drivers for older machines.
  
  You can try to use Windows updates to find the drivers from Microsoft deposits for your device: http://support.hp.com/us-en/document/c03330139
  
  If that does not do anything, you should read this another link: http://support.hp.com/us-en/product/HP-Pavilion-dv6-6000-Entertainment-Notebook-PC-series/5048664/model/5077076/document/c04758308/
  
  If Windows Update doesn't give new drivers, you can pursue alternative which are described in the linked Microsoft Windows Insider community thread: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-update-drivers-in-windows-10/a97bbbd1-9973-4d66-9a5b-291300006293
  
  If you then run into trouble, install the drivers through Windows Update, you can try to use of Microsoft Windows Update Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-windows-update-troubleshooter

  Also... If you want to test the upgrade, then before doing this, consider using a third-party application Imaging/restoration as Macrium Reflect to image your machine off so that you can easily restore it if something does not work.  And don't count on the Win10 GoBack function back on Win7, it is not reliable and can leave your computer in a damaged state.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

  Good luck

• Pavilion Slimline: Printer and Webcam not working only not with Pavillion Slimline, Windows 8

  I'm writing to a friend... None of us is particularly in computer science.

  Recently, his computer had to be replaced; so, she bought a used HP Pavilion Slimline, 400-034 PC with Windows 8 OS (not sure that all the operating system to 64-bit... just guessing).  The PC seems to work very well; However, with its previous system she used a printer (HP 7410 All in One) and a webcam (HP-HD-HD3110 & HD 3100).  She can't get either auxiliary to work devices.  Can anyone tell me if these components are compatible and that, if so, wherever it can access drivers or other software that may be required.

  Also, would you recommend that she has first upgrade to Windows 10?

  Thank you

  Terry

  Hello Terry,

  A Windows 8 driver must be installed to use the printer on the new PC.

  You can either upgrade to Windows 10 or not, the printer is compatible with both operating systems and it is a matter of personal preference...

  For 7410 printers, drivers can be downloaded from the following link:

  http://ftp.HP.com/pub/softlib/software13/COL31015/MP-110171-4/Full_Webpack-140.0.408-5-AIO_CDB_FSW_Full_Win_WW_140_408-5.exe

  Note: If the printer is connected to a USB port, unpulg the cable from your PC now.

  In the devices Panel and printers and select remove device for the icon of the printer before installing the software.

  Regarding the HP Webcam, I'm afraid that it's incompatible with Windwos 8.1 or Windows 10, it is only supported on Widnows 7 or earlier operating systems:

  http://support.HP.com/us-en/product/HP-Web-cameras/4172393/model/4172477/document/c03162257#AbT1

  You try to install the drivers for Windows 7 by using Compatibility Mode (download the file to your computer, right click and select Troubleshoot Compatibility and then follow the steps on the screen) but it has never tested on Windows 8 or 10 and if it works not you replace the webcam with a model more late which is compatible with the operating system.

  http://ftp.HP.com/pub/softlib/software12/COL46174/da-112023-1/HPWebcamSoftwareSuite_3100_3110.exe

  Kind regards

  Shlomi

• When I try to open a program that I have loaded on my computer I get a message; attempt to access an invalid address and win exec fail = 487

  I can't open a program named "instant Stitch. The computer says that it is not a program win. The program is supposed to work on windows. Other messages are, try to access the invalid programs, and win exe fail = 487

  Hi lostonline

  1 - is the first time that you try to open the program Windows XP?

  2. did you of recent changes on the computer?

  3 - is an MS-DOS program?

  Method 1

  I suggest that you try to open the program by using the program compatibility Wizard and check if it works.

  How to use the program compatibility Wizard in Windows XP

  http://support.Microsoft.com/kb/301911

  Method 2

  If the previous step fails, then you can uninstall and reinstall the game, check if it works.

  How to change drive letter assignments in Windows XP

  http://support.Microsoft.com/kb/307844

• How can I run a program in win7 for win95/98 and win NT?

  I have a hard disk for createacard Gold 5 done for win 95/98 and win NT, I hope to run it using win7 any help?

  Have you tried you compatibility mode?

  You can also try to run the program in compatibility mode

  You can find more information on compatibility modes in the articles below:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-question

  or

  Windows Virtual PC with Windows XP Mode would be the best option.

  The software is designed for an earlier version of Windows such as Windows XP? Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

  Run in Windows XP Mode requires:

  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC

  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• Firefox is compatible with the window Surface Pro and Win Phone 8

  Firefox is compatible with the window Surface Pro and Win Phone 8

  A user has posted here the other day that uses a Surface Pro 2 with Windows 8.1, then it should work basically the way it works on a desktop or laptop computer.

  Windows Phone, I don't think.

• Problem with Fingerprintsensor on Portege A600 with Win XP and Win 7

  Hello

  I bought a new Portege with Win Vista on it and Win Xp on a CD Revovery. It has worked on my new laptop. Then I installed Win 7 on it without making a backup of my system of work. It was a big mistake. I downloaded Win 7 of the Toshiba homepage divers. But the Fingerprint Software means that there is no sensor. The driver has been installed. After much trying, I used the recovery CD. Now I have WIN XP on my system with the same problem. It was a recovery with all the drivers CD. He had to work. But it does not work.

  Someone at - it an idea? Could someone help me?

  Best wishes

  Martin

  Hallo Martin

  You are right. It should work fine if there is no problem with the sensor itself.
  Is it difficult for you to test it with Vista image too?
  I mean if the situation is the same, maybe you should contact the nearest authorized service.

  Can you start fingerprinting software?

• Satellite Pro U500 - multi-boot with Win 7 and Win XP

  Good gentlemen,

  Please help me with this query I have.

  I just bought a Satellite Pro U500 with Windows 7 installed. I also have a TOSHIBA Windows XP product supplied with the laptop recovery DVDs. Was told I could downgrade to XP with the DVD.

  I want to install Win XP in addition to the existing installation of Windows 7 on a different partition, I intend to create.
  Can I create a create a separate partition and then use the recovery TOSHIBA Windows XP product DVD to install Win XP on it?

  Am just worried I might spoil the on the laptop's recovery partition?

  Basically, I want to be able to run the current Windows 7 and Win XP on my machine and want to know the best way to do it without damaging the existing TOSHIBA recovery partitions.

  I want to use the recovery DVDs TOSHIBA Windows XP product to install XP on a new partition with windows 7 OS.

  Thank you

  STRAPPING

  Hi-band,
  + downgrade to xp + means that you are not allowed to use your win7 installation any longer...

  ask problem "dual-boot":
  burn a DVD restore *, choose from the start menu

  After that, you can choose partition wich you like "sacrifice" for xp and install it...
  XP can't 'see' the install of win7, but you need a Boot Manager to boot both systems (xp is crushing the win7 boot code)

  or you go the other way:
  installation of xp and then install win7
  This has the advantage that win7 offers you the ability to boot xp from the bootmenu.
  in both options, you lose the hard drive recovery!

• Need drivers Win XP and WIn 7 for Satellite M30x-125

  Hello

  I'm looking for Windows xp and Windows 7 drivers for my laptop Toshiba Satellite M30x-125
  in the site of toshiba, under the download section, my laptop is not recognized, or the serial No.

  where can I find the drivers?
  Thank you

  Hello

  Drivers for Win XP can be found here:
  http://EU.computers.Toshiba-Europe.com/-> support & downloads

  in the driver download-> Satellite M-> Satellite M30X Satellite you choose Archive->

  Unfortunately, this is an old classic and Win 7 drivers are not included in this case, you need to collect the drivers of your own hands.

• Pomp A100-773 and WIN 7: card reader and access keys Fn does not

  Hello
  I hope that this question did not arise 100 times before. (I have not found an answer in this forum)

  Problem:
  Card reader and FN keys do not work, where can I get drivers?

  I installed Win 7 Pro on my laptop Satellite A100-773. Everything works great and Win 7 has all the drivers installed, but the card reader and FN keys do not work.
  On the support home page is not oder pilot anything for this laptop with Win 7.

  Can someone help me with this?

  Tahnks.

  PS: it was not the version upgrade of the United Nations.

  Hi all,

  by now, I tried the extra package toshiba for model serveral for win 7 and vista, but before the installation there is an error.
  the card reader is now working with the card reader for win vista driver.

  Doesn't anyone know how to solve this problem?