Win xp and Win 7 compatibility problem

Similar Questions

• Win 10 typewriter fileshare accessed by XP and MAC machines without problem.

  Win 10 typewriter fileshare accessed by XP and MAC machines without problem.

  Try to connect to a Win 7 machine, but he insists on the fact that the connection doesn't have access to the share.

  The login and the password are valid. Sharing and security is open to all. All machines are in the same workgroup.

  The machine win 7 can see another machine on the net and the Win10 machine can see actions in the Win 7 box.

  It is just the win7-online win10 that is the problem.

  Hello

  Thank you for visiting Microsoft Community.

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

  Sincerely,

  Ankit Rajput

• Satellite Pro L40-15 - Win XP installation problems

  Hello

  I have updated the BIOS to version 5.1 for Win XP. Now the bios sees the SATA in ATA drive. I checked the POST screen. However for some reason any when I try to install Win XP, it shows that no hard drive has been detected. This intrigues me. Should I remove installation of Vista and this additional partition that is on the HARD drive? I prepared myself iso image of XP with SATA drivers, but I prefer not to play with this a whole just install XP and remove that Vista.

  Someone has an idea of what I could do?

  To be clear: you must use the Windows XP CD edition SP2 family facilities.
  When you start installing WXP press F6 and load the Storage Manager (you can find it on the Toshiba support page). For this, you can use the floppy drive. I used it too and there is no problem. After the loading of Intel Storage Manager WXp will continue as usual.

• Compatibility problem with Vista and iTunes

  I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

  When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

  Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

  Don't know where to direct this question if any help you could provide would be greatly appreciated.

  Thank you.

  Hello

  iTunes is compatible with Vista and there should not be any problem.
  Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
  If your laptop can not boot Vista correctly, then you should try the repair feature.

  Turn on the computer and press F8. Now you will see the advanced boot menu.
  Now, you have many choices.

  As a first step, you should try the option called: last good known Configuration (Advanced)

  If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

  If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

• Is there compatibility between InDesign CC and CC InDesign educational problems?

  I have a subscription to creative cloud and have updated all possible applications requiring an update.

  My version of InDesign is currently 9.2.2. I got a teaching InDesign from a creative cloud user file and when I try to open the file "created with a version more recent 10.0 ' I had thought of all the subscriptions of CC were equal and provide the latest version."

  Are there know educational between CC and CC compatibility problems?

  CC2014 is a new application that you will need to download and install.

• Compatibility problem with OfficeJet H470 and cartridge HP 138 (C9369HE)

  Just bought a new photo of HP C9369HE-cartridge for my printer H470b and have an incompatibility problem. The cartridge does not fit into the socket of the cartridge, because the edge of plastic on top of the cartridge.

  Have you checked the cartridge on SureSupply model - it is in the list of compatible cartridges.

  No original HP black cartridge? or there are different modifications of the HP OfficeJet H470b printer?

  Just having realized my error... I try to put the photo cartridge in the Tricolor cartridge slot, but it must be inserted into the slot of the BLACK cartridge.

• Win 7 update problems

  25/08/10 Windows updates create once more questions for my computer.  My PC updated 8/25, rebooted and hung "Starting Windows".  I was able to restore back a few days but now I'm worried about the installation of these updates.

  HiAlexpinca,

  Method 1:

  First try to install the updates using updates of windows one after the other and check.

  Reference:

  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  If you encounter any problem in executing the step above, you can install the updates one by one on your computer manually and check if the problem reappears.

  Download and save the Setup on your desktop package and try to install the same one by one and check what update is causing the problem.

  To do this, you must enter the number of the Windows Update in the search field in the link provided below.

  Link Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 2:

  You can also use Event Viewer to search for information on the problem.

  Here is an article on how to do it:

  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321

  You can see for more information on the issue at the time where it occurred.

  You can post this information here to help us narrow down where the focus.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• I am running Windows Server 2003 R2 and am having a problem with a user profile.

  I'm running windows server 2003 r2 and am having a problem with a user profile, we have a logon.bat file that runs to map drives, but also call a logon.html file, that user gets the logon.html appear, but IE blocked then this happens only for a single user, others are ok. Any ideas please?

  original title: profile of Win 7 issue

  Hello

  Your Windows 2003 R2 server question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Microsoft Technet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  Hope the information is useful.

• After Effects CS6: Cache and reload the film problem

  After Effects CS6: Cache and reload the film problem

  I have trouble to get my images to be updated in an AE project.

  In an existing project, there is a sequence of images in a publication.  I saved and closed AE, modified images (same size and quantity of images, only the pixel data changes) and then restarted AE and open the project.  Although I've changed the images, the old content still appears.

  To resolve this problem, I did the following:

  Edition > purge > all memory

  Edition > purge > picture Cache memory

  Edit > Preferences > media & Disk Cache > clear Disk Cache

  Edit > Preferences > media & Disk Cache > clean database & Cache

  In the project window, I selected all the sequences and selected Reload

  None of them got the images to update.  I could click the film twice in the project bin and scrub the playhead and the old footage was still displayed.

  Finally, I had to replace the film with himself and that solved the problem.

  If it is operator error, lack of understanding of the functions of cache, or something else, I would be grateful for some assistance. I don't remember this behavior in CS 5.5, so I think it's a change in SC6.

  Win 7 Pro 64-bit Service Pack 1

  Intel Xeon processor X 5450 @ 3 .00GHz 2.99 GHz

  20 GB OF RAM

  I think I found the solution or what the cause of the problem, at least in my case!

  I exported the image many in a single folder and later imported into AE sequence choose all together multiple sΘquence. I then created a model composition copied several times and tried to replace valid images dragging in their computer and replacing the model holding Alt. But it does not work. Everything I've done.

  SOLUTION: move footage in each separate folder (in Solution Explorer) and then imported one after the other and rest is all used!

  I hope I helped someone! See you soon!

• HP Pavilion HPE h8 - 1380t CTO: compatibility problems, ask questions about knitting-by-turn or possible motherboard replacement.

  I recently baught an EVGA GTX 1060, as this 630 became quite long in the tooth and I thought that I would try to future proof myself a little as the rest of my components seem to be working very well.  However, I can't get the map to work correctly on this particular computer.  Oddly enough, I can get past that screen startup finally after several short beeps and let it sit, but it takes fowever to reach the office and clearly is not executed properly that the resolution is wobbly and software from Nvidia cannot even detect the card.  I guess I had got this far because of the onboard graphics of some sort, but AFAIK this motherboard which lacks.

  I know that the card works fine as I tested it in my other Tower, so I struggled to find a solution.  So far, it seems that the problem is most likely the motherboard, as HP does not have a new BIOS for it since the beginning of 2013 (which I did go ahead and install it).  If true, I find myself with either two options, it seems that the ditch system, entirely or find a motherboard that works with all my old components.  I'd rather not have to empty this workaholic, when all other parts work great, if it is not a work around I would like to know if there are motherboards I could pass that would work with the rest of my components.  Normally I would not bother with even apply for, but I hear a lot of chatter on HP PCs pre-constructed having compatibility problems.

  I bought this computer there is in the case of four years that I would be able to update as I do with any other PC, but I didn't know at the time that HP has a tendency to not update the BIOS settings for anything beyond a year which I admit is incredibly frustrating.  What is done is done however, and I want to make this work without having to clear the entire system.

  Desktop HP Pavilion HPE h8 - 1380t CTO

  Model #: B4J28AV
  Serial number: 2MD2290502

  Motherboard: 2ACE "Pittsburgh" Pegatron Corporation

  Processor: Intel Core i7 3820 3,60 GHz 'Sandy Bridge - E.

  RAM: 10 GB of DDR3 memory

  GPU (stock): Nvidia GeForce GT 630 (this is replaced by the EVGA GTX 1060)

  @Faver, welcome to the forum.

  Your problem is the BIOS.  However, it is because the 1060 GTX requires UEFI in the motherboard instead of a standard/Legacy BIOS.  HP didn't start using UEFI until mid-October 2012.  The BIOS may not be upgraded in the UEFI.  The last cards only not for UEFI were the GTX 660/670.

  MSI made cards with a switch that can be used with a Legacy BIOS or UEFI.  If you decide to go this way, you must contact their Technical Support to help them choose the best card for your system.

  The upgrade of the motherboard can be a problem.  HP has taken advice their specifications.  Therefore, they are not necessarily the same as the commercial versions.  Please make sure that the holes in the motherboard matches the accessory in the case.  In addition, some members have had problems with the connectors in the connections case before, for example, the power button.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Windows browser jumpy and freezes - MS Word problem?

  I have a Satellite L500 - UR. Opening a file large MS Word, my computer runs very slowly and ends by crashes. The main problem is with the Windows browser, because it gets nervous and freezes constantly, as if a program has been demanding a lot of computer resources. Funny enough, it only occurs when other applications are open, with Word. I checked the CPU performance when this happens and the two hearts seem to work well.

  Also, the RAM memory seems ok. I run the tool from Microsoft Diagnosis, so at this point I don't know what can go wrong.
  It might be a compatibility problem between Windows 7 and MS Word or something to do with the material.

  I just wanted to know your opinion before returning the unit to Toshiba, as there could be a simple solution to this.
  Thank you very much
  Alex

  From what you have posted, I don't see Toshiba accept that there is a fault. I would be looking at the size of the word files and consider if they need 'cleaning' - MS used to provide a utility on their website to strip unused text and 'code '... Word is not designed to write a book in a single file and no one dependent on the version made recommendations to deal with multi file documents. "master document" was one of the terms used.

• RAM, T440p and CASE latency compatibility

  I read in a review of the p 440 also the user has indicated that the default value of RAM expedition in his device was DDR3 12800 CASE 11-11-11-28 at 1.35 volts.

  There is a beautiful Black Friday process on the part of 9-9-9-28, and I wonder if there is any compatibility problem in getting that.

  No problem

• If I switch from XP Pro tp Windows will I have program compatibility problems - as with Adobe Acrobat, Corel WordPerfect, MS Office 7, etc.

  If I update to Windows XP Pro tp will be I have compatibility problems of program - as with Adobe Acrobat Pro 8, Adobe Photoshop, Corel Word Perfect X 3, 7 of MS Office, MS Project 10, Blackberry Desktop Manager, etc..  The facility will be transparent by keeping all of my existing files / content? I need to reload any program?

  What version of Windows you are migrating towards?

  Check the compatibility of each program by accessing the Web site of the Publisher. In addition, many companies, such as Adobe, have their own forums which will give experiences of other users to use a particular version of a program on a particular version of Windows.

  If you upgrade to Windows 7 or Windows 8, you can use the compatibility of Microsoft here for a guide Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/Home?Language=en-US .

  (I personally prefer to check sites and forums of the manufacturer however)

• I recvd error 'program compatibility problem' for my logitech g27 wheel.

  Logitech G27 Racing Wheel game controller

  I recvd 'compatibility problem program' error for my logitech g27 steering wheel wheel.it has been running for 1 1/2 years.

  Hi, Raceready6,

  You have posted to the Feedback Forum of responses from Microsoft.  This question should be posted in the Forum located here games

  http://tinyurl.com/7rale6r

  Compatibility PlayStation3 game with Logitech G25 and G27 racing wheels

  This table is a sample of a few PS3 popular games released in the United States. If your favorite game is not on this list, the game can still support your Logitech wheel. Contact the developer of your favorite game for information more up-to-date on the wheel support.

  http://tinyurl.com/75y7gxc

  Steering wheel general troubleshooting of game consoles (Wii, PS, Xbox, etc.)

  If my wheel does not work on my game console (Wii, PlayStation, Xbox, etc.), what should I check before contacting support?

  On a console, there are two things to check if a wheel does not work in a particular game:

  • Hardware configuration
  • In-game support for ruffles

  NOTE: If you have a Driving Force GT, and most of the wheel works with the exception of the special as the PS button buttons and Horn, see article 10768 Knowledge Base. If you have a steering wheel Driving Force, and that you are trying to play a game that is inherited from the Playstation (PS1/PS2) on a PS3 console, see article 10767 Knowledge Base.

  Installation of equipment:

  To check your hardware configuration

  1. Turn off your game console
  2. Disconnect the power adapter of the wheel.
  3. If you have a wheel that mounts to a desktop, check the AC adapter cable is firmly connected. A loose connection in the steering wheel unit to be recognized.
  4. Check the working of the power source. Some wall sockets can be controlled by a wall switch. If in doubt, try to plug another device into the wall to check the functioning of the power.
  5. Check that the USB cable has not plucked or separations in the thread.

  In-game support:

  To see if the game is compatible:

  1. Logitech.com is trying to keep a list of the supported games on the product page of each wheel. If your game is on this list, then it is certainly supported. If this isn't the case, you may need to contact the developer of the game.
  2. If your game is listed as supported on Logitech.com, but you can't use your wheel again, your game or console may require an update. It is recommended to connect your console to the internet, and then start the game in question. If your console is connected to the internet, most of the games automatically checks a status update. Try to complete each game, in addition to your console, if necessary.
  3. Try a different USB port. Some games have specific requests of what port should be connected to a wheel.

  Additional information:

  If you try these steps and your drive still does not work, contact Customer Service. The representative may ask you to repeat, or perform some variants, these steps to check the activity of the wheel. Perform these steps with the technician can resolve your case, we recommend following the steps requested by the technician.

  http://tinyurl.com/7lerfvt

• Neverwinter Nights Diamond windows compatibility problems

  Origianal title: Neverwinter Nights Diamond works with Vista?  If yes how to operate?  It works with Windows 7?  If so, how? Thank you

  Finally after many years and several accidents have completed Baldurs Gate II and Throne of Bhaal.  Bought Neverwinter Nights Diamond pack 2 years and finally able to load - surprised a compatibility problem does not work.  Even my Baldurs Gate II and Throne of Bhaal worked.

  Hello

  Once I was able to downloadand patch and then run the compatibility problem solver in the programs control panel

  Make older programs in this version of Windows

  I was able to get the game running in Windows 7 and Vista.

  Vista I deleted the shortcut on the desktop, as I had it already installed before finding the compatibility issue.  When I installed Windows 7 I chose not to install the shortcut - according to a thread I had followed.

  The most difficult thing to solve the problem was to find the patch. I can not even find the page it is on, but when I typed

  Installation for Win7vista NWN1 includes links patch - the right page came

  I'll try and copy and paste the link into this but do not know if it will work.  This is the file you need with never Winter Nights Diamond toget it works.

  http://files.BioWare.com/neverwinternights/updates/Windows/English/NWNEnglish1.69HotUUpdate.exe

  The forum was http://social.bioware.com/forum/1/topic/187/index/3341490/1 , although I wasn't able to get the intothat by typing.

  The patch downloaded and installed very easily.

  After you have installed the patch, I ran the "make older programs run in this version of windows" - using XP service pack 2 (Vista) and either 2 or 3 in Windows 7.

  It's located under Control Panel - programs - but I think that the classic view.

  best regards to all the help on this forum

  Wendolyn