Pavilion G6 - 1201tx: did not find Bluetooth

Hello

I tried to connect a bluetooth device recently and just to know that bluetooth is not available in my system. I tried to install many drivers from the HP website, but none of them worked.

Make my phone have bluetooth? If so, could you please let me know the drivers that really work.

Thank you in advance

You must install the Broadcom bluetooth driver...

This package contains the driver for bluetooth Broadcom and software to support
notebook models that are running a supported operating system. Broadcom
Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is
compatible with Broadcom bluetooth 3.0 and earlier versions.

FTP://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61617.exe

Tags: HP Desktops

Similar Questions

  • HP Pavilion dv7-6c95dx: could not find bluetooth to turn it on.

    I can not locate where or how to activate bluetooth for my laptop.  I was told when I got the laptop that she did not have compatible Bluetooth.  Little help would be greatly appreciated.

    The specifications I've seen on your laptop does not show it as a model with bluetooth. It has wifi and widi, but no Bluetooth.

    http://support.HP.com/us-en/product/HP-Pavilion-dv7-6c00-entertainment-notebook-PC-series/5169332/model/5210873/document/c03220956/?SKU=A6X02UAR

  • HP pavilion g6 2302ax: did not find drivers for HP pavilion 2302ax g6

    Hello Sir,
    I use the HP pavilion g6 2302ax model. I tried updating my drivers but I could not find the drivers for it on the site.
    Any help will be appreciated.

    @Ragas

    Your drivers here.

    http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-notebook-PC-series/5330578/model/5344271

    REO

  • MacBook can not find bluetooth devices

    I just bought a new Macbook.  He can not find bluetooth devices.  The device is fully charged and so forth.  He saw the mouse for a fraction of a second, but then he fell.  I tried other bluetooth devices.  It does not find.

    I had this problem too, turn on the Macbook and off is your best bet. But if this does not work, you can go into the settings of your macbook. Settings - Bluetooth - advanced and ensuring that all things have been checked. Hope this helps, good luck to you.

    ~ Michael M

  • all of my photos in icloud were removed from the restoration (and did not find the album recently removed to icloud)



    all of my photos in icloud were removed from the restoration (and did not find the album recently removed to icloud)

    The opposite happened to me - in the opposite direction! I found all my pictures from Nokia mobile in icloud on my iPad a few days ago, had no blue cogwheels devices! The two devices + home phone is all about wireless internet of the contract with ORANGE in Europe! They will not help,

    I think my router - put in place by an expatriate for me - is hacked because of the problem. I didn't ask him to change my contract or warn of my move when I did 2 years ago - but he went ahead and made Orange disclose no information telling me his "confidential".

  • I just installed Windows 7 on a PC that I just built. Being new to Windows 7 I started to play around him and did not find any games at all. Does anyone know how to fix this?

    I just installed Windows 7 on a PC that I just built.  Being new to Windows 7 I started to play around him and did not find any games at all.  Does anyone know how to fix this?

    Salvation Ita; tribal

    Congratulations on a newly built Windows 7 computer. Selected games may not be that is the reason why you are unable to find all the games on the computer.

    Follow the steps to turn on the games feature.

    1. click on start.
    2. type optionalfeatures.exe in start search.
    3. place a checkmark for the games.
    4. click on OK.

    After the computer has been restarted, check if you can play games on your computer.

    See the article: features on or off Windows activate: http://windows.microsoft.com/en-US/windows7/Turn-Windows-features-on-or-off

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.

    Visit our Microsoft answers Feedback Forum and tell us what you think.

  • Did not find file 'flash.ock. What is-, which it belongs.

    Original title: flash.ock

    Did not find file 'flash.ock. What is-, which it belongs.

    Hello

    1. when exactly you get this error message?

    2. do the graduates error message?

    3. don't you make recent changes?

    I suggest you to follow these steps and check if that helps:

    Method 1:
    Start the computer in safe mode and check if the same problem occurs:
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Method 2:
    Try to perform the clean boot and check if it helps:
    http://support.Microsoft.com/kb/310353

    NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

    Method 3:
    If not, try to uninstall and reinstall Flash Player and check if the problem occurs.
    http://kb2.Adobe.com/CPS/141/tn_14157.html

    It will be useful.

  • "Minecraft could not start because it did not find an OpenGL accelerated...". »

    Dear support,

    I am trying to play minecraft on a computer that I just installed windows XP PRO 32 BIT
    on. When I start the game, it is said:

    "Minecraft could not start because it did not find an OpenGL accelerated...". »

    I checked the driver for video card and updated website of microsoft as well as from the HP Web site, but then started having a similar error message
    again, the video card is intregate: Intel 82915 G/GV/910GL Express Chipset Family

    My PC: HP P4
    RAM: 1 GB
    CPU: 3.06 GHz
    OS: Windows XP pro SP3 32-bit

    Best regards

    madgestic. Star

    Note: would please send the answer to the Email: * address email is removed from the privacy *

    Hi Vigen,

    As you are always faced with the question after update display card drivers, I recommend you contact the game Minecraft help support:

    http://www.minecraftforum.NET/viewforum.php?f=1002

  • Setup did not find any hard disk installed

    I'm trying to re-start Windows XP on a disk (file missing or corrupt ntoskrnl.exe). Whenever I press the 'R' to repair key I get this error message:

    Setup did not find any hard drives installed in your computer. Make sure that the hard drives are powered on and properly connected to your computer, and that any hardware configuration of the drives is correct. This may involve a diagnosis provided by the manufacturer or the installer running. Setup cannot continue. To quit Setup, press F3

    Someone at - it ideas?

    Hello

    It is perhaps that the hard drive is not connected properly. Make a person qualified to check the connections of the hard drive to make sure they are solid, you need to maybe disconnect and reconnect both ends of the cable.

    I suggest you return the article mentioned below to learn how to fix ntoskrnl.exe.

    Error message: "Windows did not start because of a configuration of the disk of the computer problem.

    http://support.Microsoft.com/kb/314477

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Install XP: Setup did not find any hard disk installed

    I have this old computer. When I try to install Windows Xp, it says that Setup did not find any hard disk. I have readers of diskette and cd on the computer. A source told me that I need a SATA RAID driver until I do.

    Windows XP
    AMIBIOS
    MSI

    Correct, you will need to download the appropriate TXTmode drivers and put them on a floppy disk. If you have a MSI motherboard in your system, you will get these drivers from MSI.

    It would be also possible to get Windows to load with a change in your BIOS settings, but I recommend that get you the correct drivers.

  • Boot Manager did not find OS loader

    Startup Repair cannot repair

    Root cause of my problem, Boot manager did not find the OS loader: repair action: file repair failed 0XC000013a

    Repair action: repair boot config data store could not = 0 X 490,.

    What should I do?

    Hello

    1. don't you make changes to the computer before the show?

    2 may I know the computer brand and model?

    How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows:

    http://support.microsoft.com/kb/927392/en-gb.

    I hope this helps.

  • Windows did not find antivirus software on this computer

    Installed WindowsDefender and Action Center said "windows did not find antivirus software on this computer.

    It is to be expected.  Windows Defender is an anti-malware program that is designed to protect you against spy-ware, and ad-ware only.  However, there is no capacity for the anti-viral.  You should always install an antivirus application any.

    There are several free antiviruss protection applications.  And here are two:

    AVAST! Home Edition

    http://www.avast.com/eng/avast_4_home.html

    Microsoft Security Essentials

    http://www.Microsoft.com/security_essentials/

  • RV180W [IKE] ERROR: did not find configuration for

    I have 1 or 2 of these messages per week.

    Fri Sep 11 15:14:30 2015 (GMT + 0000): [*] [IKE] ERROR: did not find configuration for 85.25.43.94 [60105]

    I have not any clients VPN active so do not know why I get these other than intrusions attempts.

    Hello

    You have tunnels VPN site-to-site configured in the router?

    .:|:.:|:. CISCO | Russ Wyatt | Network engineer | Cisco technical support | [email protected] / * /

  • Action Center telling me that Windows did not find antivirus software on my computer. But my antivirus software is enabled.

    Action Center telling me that Windows did not find antivirus software on my computer. But my antivirus software is enabled.
    No idea how I can get Windows to detect that my antivirus software is enabled?

    Hello
     
    Scenario 1: As you get this message we suggest to uninstall and reinstall Microsoft essential Security on your computer and check if the problem is resolved.
     
    Scenario 2: This problem may occur if the antivirus program is not properly installed on your computer, or if it is not updated with the latest updates.
     
    Scenario 3: This could happen if your computer is affected by the horses of Trojan or virus that is not be removed from the computer.
     
    You can perform an analysis online on your computer and check for the issue.
     
    Now to visit the below link provided to perform an online scan on your computer.
     
    Scenario 4: You can install other third pary computer antivirus program because Microsoft Security Essential is just an addon of value that comes free with Windows 7.
     
    Also, you can check the link below for programs supported by windows antivirus 7.
    Also try to uninstall then reinstall the security on your computer program.
    Note: Make sure that you have a backup of the program of security with you.
     
    Thank you, and in what concerns:
    I. Suuresh Kumar-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.
  • Did not find the main: PluraRunner. Program ends.

    Hello..

    I use Windows 7 (64-bit). The problem is that I have a prompt with the error "did not find the main: PluraRunner.» Program will exit. "Here's a screenshot of the error:

    -By clicking on OK the prompt again in about 20 seconds. It never stops.

    I tried:

    -Restart and re-login
    -Uninstall and reinstall Java
    -Remove any redundant Java installation. So for the moment I only have a single installation of Java on my machine.
    -Defining the path and Classpath variables

    Whenever the prompt, I see files two following jar in the temporary location:

    If I click OK to the prompt and delete these files, they are re-created in the same place when the guest returns.

    Please me before I lose my sanity on this stupid problem!

    -Mitesh

    Solved!

    I was able to resolve the problem by disabling one of the start-up services in msconfig:

    Some people may find the same as that in their list of others, but the key has been one of the start-up services which kept causing the error message. I even rebooted my machine and made sure that the error does not return.

Maybe you are looking for

  • How to complete the action of the OK"" button.

    Hi all I am very new to LabVIEW and am not aware of a lot of simple things. Here's what I want to do... I want to change a complex VI (not written by me) and want to do a few simple things. There are several entries in my VI: (1) constant integers (t

  • ASA5580 Installation of HW - where is the GROUND connector?

    Hello people, In the context of a domain controller, deploy, There is need to install 2 x ASA5580. My surprise was the missing connection (or place) screw on the chassis for earthing cable. All the facilities of othes (ASR, 6500, Nexus 7 K) have a co

  • Convert String to DATE

    HelloThere is a '20091002' chain, and I need to convert it to this day.20091002 is in format YYYYMMDD - the VARCHAR2 data typeI need the above in DD/MM/YYYY - DATE datattype'20091002' (VARCHAR2) - 10/02 / 2009 "(DATE)Thank youAman

  • THERE ARE

    Table t1(id) 1 2 null 3 4 Table t2(id) 4 null 1 9 8 select a.id from t1 a where exists ( select 1 from t2 b                                  where a.id != b.id                                   )   Why the above  query return 1,4 as o/p 1 2 3 4

  • The date in the CQL conversion

    I want to run the following TPC - H query in Oracle CEP.SELECT RETURNFLAG, LINESTATUS, SUM (QUANTITY) AS sum_qty, SUM (EXTENDEDPRICE) AS sum_base_price,Sum (EXTENDEDPRICE *(1-discount)) AS sum_disc_price, SUM (EXTENDEDPRICE *(1-DISCOUNT) *(1+TAX)) AS