Pavilion g6-2006ax: no boot device after bios update

Similar Questions

• Satellite P100 - boot failure after BIOS update

  Hello

  I wanted to update BIOS on my Satellite P100 - (PSPADE) with the latest version, downloaded from the Toshiba site.
  Quit all applications.
  Run the zip file error file not found %path\phlahnt.sys.
  Keyboard not working unable to stop even by using the power button / stop.
  Laptop shutdown unplugged and battery removed.
  More boot Message No, no. Beep, nothing.

  I tried with the CD of restoration with power into the F12 key, but nothing.
  I also tried to power up with and without AC connected and with and without battery, but still nothing.
  Plug, battery, at the time led the power leds and speakers also on
  Any help? Any suggestion, any idea?

  Thank you very much
  Nour

  Hello

  Hmmm what to say. Sounds not good and in my opinion, looks like you have successfully updated the laptop computer with a bad BIOS or something went wrong during the BIOS update process
  Are you sure you used the right BIOS of 110%?

  It seems that you will not be able to fix this problem yourself, without any additional help from the laptop technician.
  In most cases, the BIOS has to be flashed again on the particular way

  For me it s clear, you will need to contact the ASP to get rid of this problem

  Best regards and good luck

• Re: Satellite L500D - boot problem after BIOS update

  I downloaded the new version of BIOS (v1.4) official Toshiba site to update my computer Satellite L500D (PSLK0A - 00U009). But after the update, Windows 7 cannot start, Windows logo appears for a while then it restarts automatically. Windows then goes into repair mode. I followed the instructions on the screen to fix. But it does not work.
  When I reinstalled Windows, the computer worked fine until Windows Update told me to restart the computer. The computer dies again.

  I think that this version of BIOS has a problem. I wonder if there is a way to downgrade the BIOS to the earlier version. I found some instructions on the net to use the Phoenix recovery disk, but I have no file disk and BIOS.
  Please Please HELP, very appreciate.

  TKS

  Try to install the OS to help original Toshiba recovery image. After disabling automatic Microsoft updates to install. When you get the message about controlled initially available updates and install important updates only.

  Check it once more to see if the same thing will happen again. Display the results.

• Pavilion 500-046: fan runs loudly after BIOS update

  So I downloaded the BIOS and sends an update notifications HP wireless. Consumer Desktoop PC BIOS update HP (family ROM SSID ZAEO). After the restart, the fan on my PC very strong rotates every 30 seconds or so for about 15 seconds then turns off; sometimes even more frequently. It's never happened before. Anyway I can fix this or go back to the old BIOS or something?

  Then I opened my PC and went home with a feather duster and a vacuum. This ended the problem.

  Thanks for your help Dave.

• boot problem after bios update

  I was recently asked to install a new update of the bios on my HP Envy 15.

  After that installing Windows 8.1 is turned on and the version of the bios detected is Insyde F.56

  However, before the update, I had a dual boot by Grub2 and now I am unable to run

  the versions of Linux installed in children partitions on the same drive.

  This version of the bios seems to me to prevent the loading of Grub2.

  Can you help me to solve it?

  That's exactly what I did before:

  (1) linking boot-repair a liveUSB / recommended repair.

  (2) press ESC during startup / press F9 / select Ubuntu in the boot menu / start Ubuntu / run Startup Repair / recommended repair.

  In the case that grub won't load and windows starts.

• Precision T7500 boot problem after BIOS update

  Hi eveyone,

  I've recently updated the a15 BIOS on my Dell Precision T7500 machine and now when it starts, it tries to start for a few seconds, then stops. He did this 10 times and the number 3 and 4 are on the machine. Everyone recognizes this problem?

  Win 7 64 bit Service pack 1, 6 GB of RAM, recently updated the BIOS A09

  Thanks in advance

  KWA-1,

  3 + 4 = suspends to RAM Windows fallback status

  You can start in safe mode and disable all options sleep/hibernate?

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Pavilion dv6 - 7095ca: no boot device - insert boot disk and press any key

  
  

  Thanks for your help and please excuse my bad English.
  Please check item 7, if you're in a hurry. This is the point with my Pavilion DV6 - 7095-CA:

  (1) the operating system is Windows 7 Home Premium (64 bit), the provided original with my 7095CA Pavilion, more updates HP until 2013, and all Windows updates until July 2015.

  (2) now I can't access the operating system and I have no interface UEFI. I can see that I press F2 at startup, just a test simple disk in BIOS f.0Une (the test shows that the disc is OK)

  (3) return in 2013 it took a drive failure. I did replace the disk and reinstall original Win7, all updates, including the HPS, win7 updates and all my personal software.

  (4) at this time, I bought a spare hard drive and did a complete copy of the disc using Partition Wizard bootable cd. The second disc has been tested and worked perfectly, with all of my personal software on this subject.

  So I have 2 HDs identical with the same system on both drives, fully working and tested.

  (5) a few days ago I came across the HP website and made a few updates, including the BIOS f.0Une (the last BIOS update, was of course).

  (6) after BIOS update ran, I received the message "no boot device - insert boot disk and press any key".

  (7) I couldn't solve the problem, so I did remove the hard drive and install my backup drive, which lay in a dry place without danger from 2013.

  (8) I turned on the computer and got the same message "No boot device - insert boot disk and press any key", and I couldn't find any way to solve this problem.

  Now I'm doing a new installation on a third HD everything works very well, so far, in the new facility and I will never buy HP again.

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• OCR does not work on mobile devices after the update. How can I make it work?

  Ocr does not work on mobile devices after the update. How can I make it work?

  Hello

  Acrobat Reader mobile apps (for iOS, Android, Windows Phone) is the free PDF viewers. They don't support OCR (Optical Character Recognition).

  However, you can purchase the subscription online service called Adobe export to PDF and use it in mobile applications of Acrobat Reader to convert PDF documents to other formats (e.g. Microsoft Word, Excel, PowerPoint).

  Have you already bought the Adobe online subscription service export to PDF?  Would make sure that you're signed in with your Adobe ID to use the service?

• "No boot device" after the BIOS doesn't load the Satellite L50 - B - 25 c

  A friend who bought this laptop came up to me, explaining that he does not have to install an operating system. Then I tried it myself. I dusted off my original windows 7 pro 32 bit cd he jumped into the tray to cd and tried to boot from the cd by using the boot menu and bios boot order. the operation failed and even through I have cd was recognized by the bios the laptop not returned "no bootable device - restart device" error. So I tried to boot from usb NSB each usb port. The same unsuccessful result that happened. I then tried a USB bootable win7 64 bit and also failed.

  Anyone have any ideas why the laptop is not booting? Could there be a part that is DOA? What is a bios problem? Council of State, I think to Flash the bios.

  This laptop is brand new and never had anything installed on it.

  Thanks for the help!

  HARD drive is recognized correctly in the BIOS?
  If you want to downgrade from the Win7 machine, you must change secure boot option in the BIOS.

  http://APS2.toshiba-tro.de/KB0/TSB2C03F80002R01.htm

  You already changed option UEFI?

  By the way: before installing own version checking OS, which version of Windows is supported for this machine.
  Visit the download page of Toshiba on http://www.toshiba.eu/innovation/dow...ivers_bios.jsp and which operating system versions are fully supported with all the necessary drivers, tools and utilities.

• "Boot device not found" Message After BIOS Update

  Today I was invited by the HP Support Assistant software that a BIOS update was available, so I got the application download and install the update. When the computer is back to the top, it says the boot device is not found.

  Ugh.

  Can someone help me with this?

  I have a HP ENVY TouchSmart m7-j010dx Notebook PC running Windows 8.1. Laptop was working fine before the update, which means that I probably would not have allowed the update of the BIOS.

  I found the problem (for me, anyway).

  1) go into the BIOS (F10 from your black screen) configuration settings.

  (2) fix the "Legacy Boot Options" and save your changes.

  As soon as I did it, it starts immediately in Windows.

• Pavilion dv6-7029wm, do not boot after BIOS update

  Hello

  Here are the details of my laptop and the problem.

  Product name: Pavilion dv6-7029wm

  OS: Windows 7

  Error: Fail to start. Caps Lock flashing in 1-1/2 dry once continuous, red wifi light on. Power light and the battery light on, no flicker.

  Pre-grant changes: updated to the latest BIOS updates as well as 3 other updates; security etc.

  I've tried remove the battery, unplug adapter, start-up. It still does not work.

  Its only for 5 months I've had this laptop. Please help me.

  Hello again Sowmya_Harsha.

  Unfortunately there is nothing more I can do.  However, I've increased your case.  You should be contacted by a specialist soon.  They normally have with customers using the feature of private message on the forums.  If you don't know how to use the private message function, take a look at this thread. I wish you a great weekend!

• Satellite A660 - boot problems USB after BIOS update

  Hello

  I own a Toshiba Satellite A660 and have recently updated the BIOS with the latest version (1.80). Since then, the laptop freezes on the splash screen (the one with the Toshiba logo) whenever a USB flash memory is attached.
  It works without the memory flash connected and if I connect it after I enter the starting or the BIOS Setup menu. I can even start her like that.
  As far as I'm concerned, this is a serious regression. Is there a way I can downgrade to the version of the BIOS, or any other way to solve this problem? I rely heavily on external USB drives.

  Kind regards
  Claudiu.

  Claudiu salvation,

  That is really interesting, I have to say so I tested on my new Satellite A660 and Transcend 4 GB USB Stick. Well, I also installed 1.80 BIOS but I can t view this problem HARD drive is set as first boot device and all the other BIOS settings are default. The Toshiba screen and Windows computer starts as usual.
  No problem at all!

  Have you tested different USB devices?

  In General, it is not possible to downgrade BIOS. It is possible to an authorized service because Toshiba on page you can download the latest version only but I doubt it s a bug in the new version of BIOS because it works on my A660.

• Satellite A100 PSAA8E: Cannot boot from USB after Bios Update

  Hello

  I downloaded the latest bios (v6) for my satellite a100 (psaa8e) and after the update of the old bios, I noticed that I can not boot from USB. Is there a way to restore the old bios or will this problem solved?

  See you soon
  MB

  And before you can update the BIOS you were able to start the bootable CD from the external optical drive USB drive facilities?

  To be honest I really don't believe it. Try to connect USB FDD and you will see that the FDD is recognized and you will be able to use it as first boot device.