Pavilion g6 - 2076sr: Windows Installer?

Similar Questions

• Pavilion x 2: Hp pavilion x 2 Windows Installer via the bios

  A friend of mine accidentally shut his laptop computer while she has been updated. Long story short, be that a new installation of Windows continuous reboot and "recovery". But I can't get the laptop to boot from a USB key, if anyone can give advice?

  Hello

  You are welcome

  Create new installation media is a good idea.

  My usual environment in Rufus to install 10 Windows on a gpt disk's MBR for UEFI - FAT32 computers.

  Also, I would definetely make sure you insert the flash drive, when the machine is turned on then it off via the power button - press and hold for 15 seconds just to make sure that the machine is power off.

  Tap next to the ESC key as soon as you turn on and then go to boot (f9) from there Manager.

  Note:  If it still does not work, enter the menu of the bios (f10) and look for a setting that emulates usb 2.0 in the Pre-os environment.

  Kind regards

  DP - K

• HP Pavilion g6-2330dx Notebook: keep displaying the "Windows Installer" dialog box and pressing OK button to restart over and over again

  Hello

  I tried to update my laptop Win8 to Win10, but before that Win 8 must be upgraded to Win8.1 then Win10. Unfortunately, I encountered the problem after you install the free upgrade to WIn10.

  I decided to use the system recovery and the source is from my USB.  (I created the USB key recovery).  The restoration was completed and started making configuration suddenly my laptop just because of the excessive heat caused my laptop stop does not complete the installation of windows 8 and finished to get the dialog box of "Windows Installer".

  I inserted the USB key, but it seems that its not reading. I tried F2 - mode of the system, but it only shows the Bios and other tests not the usual display of F2.  I haven't tried F11 and same thing no chance.

  My question is, how do I make my laptop back to the operating mode as the way to reinstall the entire operating system and HP Recovery Manager or HP configurations.

  Do I need to buy a CD of HP recovery my laptop?

  I have HP reactions appreaciate or someone who is ready to help and assist.

  Thank you in advance.

  Screen of the image below:

  

  Hi there @KierV,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP Support. I understand that you had initially a question of upgrading Windows 10. After the upgrade, you have tried to restore on Windows 8 (previous version), and now you have issues going back.

  I did some research for you. I'll provide you with some troubleshooting documents that I had found.

  The first document is called a troubleshooting (Windows 8) HP system recovery problems. If this does not work, please follow this document called recover your computer from a USB flash drive. Please follow the troubleshooting steps in this document to see if you can get the USB recovery media you created to operate.

  If the USB key that you created still doesn't work after you troubleshoot, you can either you make on the Order Recovery Media-CD/DVD/USB and drivers HP Pavilion Notebook PC g6-2330dx Page or you can use the following link to create yourself a file number, then give us a call:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  
  File number and phone number are displayed.
  
  They will be happy to help you immediately.

  If you want to try to restore Windows 8, Windows 8.1 upgrade and then upgrade to Windows 10 once again, please read this document called upgrade to Windows 10.

  I hope this helps!

  Have a great day!

• Windows Installer / not found boot device

  Hey

  I have HP pavilion

  model: e0z59ea #abt

  I tried to install linux (ubuntu) on USB, but it 'clear' my coumputer

  I get a maasage to install oprating system on my hard drive.

  (hard disk 3F0)

  I am looking for the installation cd but I remember that I do not understand in the shop.

  where can I get the windows installation 8 for my coumputer?

  I another laptap in the past, the virus clear the windows, byt I get the installation CD and solve my problem

  Hello

  Thanks for posting in the HP Support forum.

  Nowadays, most (if not all) laptops do not come with recovery media (CD/DVD, etc...)

  Computers are equipped with discs hard (or SSD) that contains the two operating system (primary partition) and hidden recovery partition. Users can boot from these recovery (instead of primary) partitions and restore the default settings (for example in the infection by the virus or if corruption of Windows).  The user can also use the built-in software and can make a backup of recovery (on DVD or USB key). Here is just one example of how this can be done:

  http://www.YouTube.com/watch?v=bfn1IGP-TWC

  Unfortunately, as you install another operating system (Linux-based) and that you have formatted the drive HARD/partitions, these partitions of recovery very probably are no longer present. In this case, you can take the path of the long (er). You need to buy HP recovery for your computer media.

  http://support.HP.com/us-en/document/c03833718

  Please, contact the nearest HP Office-> http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

  and ask the agent (via call phone/chat/email) to guide the recovery disc for your computer purchase. They are generally cheap and arrive quickly on.

  Once you receive a recovery media (DVD), follow these instructions to recover your machine with Windows 8:

  http://support.HP.com/us-en/document/c03489643

  Choose->

  Grab your laptop of HP-> restore recovery disks

  Please, let me know if I can help you further.

• G6 2255 ev Pavilion: drivers for windows 10

  Hello
  I recently bought an SSD.
  so, I want to put windows from the start and I need all the RIGHT drivers for my laptop.
  I don't want to put bad drivers and will need to unistall them later.
  So I need the drivers for my laptop, 10 64-bit windows.
  could you tell me the exact drivers I need?
  the basic only... to work correctly!
  Thank you for your time.
  also, I would like to know the thickness of my dvd player, so I can buy a shopping cart of DVDs to my hard drive.
  Thank you once again!

  HP only provides drivers Windows 8 and 8.1 of Windows for your model. However, I have an older G6 Pavilion provided with Windows 7 installed, and I did it with success a clean install of Windows 10 on it. Since your computer was made for Windows 8, I assume that the upgrade process would be smoother for you.

  A little tip: I recommend that you have a wired Internet access available to your computer during the installation process so that Windows can download the drivers for your computer. I tried without a connected network cable, and I found myself with no Internet capacity after installation. I had to do another clean installation with a connected network cable, and this time the installer found all the correct drivers: map Wi - Fi button, graphic, touchpad, webcam, reader of cards, all. I didn't have to install anything manually.

  I can't advise you on the caddy HARD drive for your DVD burner, but I've seen messages on the subject in these discussion forums. I did replace my HARD original with an SSD drive.

  You can look at my profile and read my other posts for questions, I met with my BIOS. I hope that you will not face this problem because your machine is more recent.

  Good luck!

• Pavilion 23 and Photosmart7510: try to connect the 7510 Photosmart HP printer / scanner / efax / copy to HP Pavilion 23 w / windows 10

  I am trying to connect to the HP Photosmart7510 printer / Scanner / Efax / copy of my HP Pavilion 23 running Windows 10. Whenever I put in the printer installation disc, it says ' this will only work on devices running windows 7 "and some other stuff. Is there anyway that I can connect these two? I know there must be. someone please help, I just spent 600 on this printer!

  Hello

  The original CD was made before Windows 10 release and it is not intended for the operating system.

  Follow the HP printer Assistant facility below to get the latest version of the printer software:

  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  Kind regards

  Shlomi

• My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

  My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

  Brand: HP
  Type: laptop
  Model No.: Pavilion zt3000
  512 MB DDR1 RAM
  Thank you very much!

  Hi Dominic,

  Are you able to get into BIOS to make changes?

  If so, you can try to reset the default settings of the BIOS and check.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

• Windows Installer during the boot

  Whenever I start my laptop, I get a message saying "Windows Installer - preparing to install.  He then proceeds to install the so-called TrayApp because the next message I get will say "Please wait while Windows configures TrayApp".  If I do nothing, he just keeps restarting and never goes beyond this point.  If I cancel, he tried the same thing with the following: C4580 HP product Assistant, MarketResearch, HP Photosmart Essential and then status.

  Cancellation of each of them does not solve the problem because it will start all over.  Then after that I canceled for about 3 minutes, it stops.

  I have a HP Pavilion dv7 running Windows Vista SP 2.

  Dave1313,
  Thank you for visiting the Microsoft Answers community forum.

  This looks like an application custom HP who keeps trying to install it, but never finished, so he keeps trying every time you start.  It could have bad install due to your security software or settings, or the installation file could be corrupted.  You can try to understand why it is not install and help to complete the installation, or you can just stop it trying to install.

  To stop it trying to install:
  To start the configuration system (msconfig) utility:
  Click Start and type msconfig in the box start the search.
  In the section programs, click Msconfig.exe.
  On the Startup tab, you will find the application that keeps trying to start and uncheck the box next to it.  It comes out the startup so it will run each time Windows starts.

  Trying to find out what is now moved, perform a clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  Let us know if you still need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Installer is no longer on my computer... How can I reinstall it?

  I can't follow the suggestions to reinstall Windows Installer , because it no longer appears in my '' programs. ''  How can I reinstall Windows Installer without this program?  I followed several methods of Microsoft, but my computer cannot continue (deadlock) when you try to suggest measures and methods.  Desperately needing a viable patch.

  HP Pavilion dv6000 laptop

  Windows Vista Edition Vista family

  Service Pak 2

  2.5 GB memory

  32 OP system

  Bob

  Go to the control panel

  Select administrative tools

  Select Services

  Scroll down to Windows install

  Right click on and select start WIndows Installer

  It starts?

  If not, look in the observer of events (also listed in administrative tools)

  for red error events corresponding to the time when you tried to start the Windows Installer.

  What are the events and errors?

• Windows Vista not reponding: Windows Installer, Office 2007 (Outlook), add/remove programs, System Restore, etc...

  Gentleperson,

  I am looking for a solution fix my PC, HP Pavilion Slimline. Windows install Office 2007 (Outlook), add/remove programs and the system restore will not work. The apparent problem is a file corrupted in the system, based on the forums of Windows and Office 2007 and published articles.

  I tried the following:

  • Retore system Mode safe mode and in Safe Mode network - without success
  • In Normal Mode Windows Vista will not respond to the system restore or the Add/Remove programs - without success
  • Chkdsk/r - unsuccessfully
  • sfc/scannow won't answer - no success
  • Msconfig.exe helped with a clean boot; However, this does not solve the problem...
  • Windows Installer is in auto status, but can not start; I have a 1053 error messsage... too slow

  As it can be seen, there is a problem with my operating system. I have a recovery disk to format my PC in its original configuration. However, I have not saved my files that I won't lose to the formatting. Please advice.

  Thanks in advance,

  Lhorea

  I have general thing is you did not run memory diagnostic
  (% SystemRoot%\system32\MdSched.exe).
   
  You can try the recovery prompt environment SFC. Startup type
  Repair in Help and see
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  --
  ..
  --
  "lhorea" wrote in message news: 2a55a4d8-3acb-4b2d-9322-2756d47a5808...
  > Gentleperson.
  >
  > I am looking for a solution fix my PC, HP Pavilion Slimline. Windows
  > Installer, Office 2007 (Outlook), add/remove programs and restoring the system
  > will not work. The apparent problem is a file corrupted in the system,
  > on the forums of Windows and Office 2007 and published articles.
  >
  > I tried the following:
  >
  > a.. Retore system Mode safe mode and in Safe Mode network - without success
  > b.. In Normal Mode Windows Vista will not respond to the system restore or
  > Add/Remove programs - without success
  > c.. Chkdsk/r - unsuccessfully
  > d.. sfc/scannow won't answer - no success
  > e.. Msconfig.exe helped with a clean boot; However, this does not resolve the
  > problem...
  > f.. Windows Installer is in auto status, but can not start; I get a
  > messsage error 1053... too slow
  > As it can be seen, there is a problem with my operating system. I have
  > a recovery disk to format my PC in its original configuration. However, I have
  > not backed up my files that I won't lose to the formatting. Please
  > advice.
  >
  > Thanks in advance,.
  >
  > Lhorea
  >
   
   

• Necessary drivers for HP Pavilion 500-267c Windows 7 Professional 32-bit

  Hello

  I upgraded my HP Pavilion 500-267c windows 7 Home premium 64-bit windows 7 Professional 32-bit.  I need all drivers of base.  I couldn't find anywhere for HP pavilion 500-267C windows 7 32 bit prof.  Help, please!

  Drivers for Ethernet controller network controller, device PCI Simple controller PCI Communications, audio, graphics, etc.

  Your help is greatly appreciated... Thank you in advance...

  Daniel.

  Hi, Daniel:

  There is no 32-bit support for your model.

  You have to experiment with the drivers of business models and of drivers from the Internet sites of the Lim component material.

  You can try these for starters:

  1 chipset driver. First, install and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  2 the graphics driver.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23638&lang=eng&OSVersion=Windows%207%20(32-bit) * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  3. audio. This one, I'm not sure, and you never have the audio to work (try to update the Device Manager and the Auto search box once you can connect to the internet).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=19282&keyword=IDT&DownloadType=drivers&lang=eng

  Network: Download and install the driver for the second on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128686-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0007

  PCI Simple Comms:

  Try windows update of the device.

  USB 3.0:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=USB+3.0&lang=eng

• laptop HP pavilion g6, with Windows 7 home basic 64-bit

  In 2012, I bought a pc hp laptop pavilion g6, with Windows 7 home basic 64-bit in Saudi Arabia. I found 2 months that I did after I bought it reinstall drive does not work please help me

  Hello

  Here are a few options.

  1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 you can use the following method to create your own family Windows 7 Edition installation disk basic 64-bit.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC. However, it not there no download directly available for Windows 7 Home Basic Edition, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 64-bit - the source is Digital River).

  Windows 7 Home Premium SP1 64-bit

  For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer.

  http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html

  Once that is done, use an application like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need for your laptop, software and additional pilots are in entering either the complete model number or product of your g6 series no here.

  Best regards

  DP - K

• Vista \Windows\system32\winload.exe is missing, how can I get the Windows installation disc?

  I have a HP Pavilion dv6500 Laptop, I'm trying to restore my system, but the system wants to use a Windows Setup from disk because my windows/system32/winload.exe could not be loaded"status: 0xc000000f Info: the selected entry could not be loaded because the application is missing or damaged. »

  The windows installation is located in the machine, and apparently the recovery has not copied as part of the recovery disk.  I tried to identify if a recvery kit was available and it seems that maybe not.  What must I do to fix this?

  Have you tried to type the F11 key immediately after switching on the laptop. This should start in the hard disk partition recovery.

  You should be able to order by phone recovery disks. If you are USA / Ca... 1-800-474-6836

• Can I do a repair disk for my 10 boot camp windows installation?

  I installed boot camp using the boot camp assistant and not from my own installation disc.  It is provided in the boot camp assistant.  Sometimes I can't start windows and getting a bad_pool_header error.  I am asked to insert an ERD.  How can I make or get a repair disc?  When I open windows and try to make one, I am informed that I can not with this version of windows 10.

  There is no repair under OS X disk to repair Windows. You must use your Windows installation for this disc. Or find a Windows program for such a purpose.

• When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. "Help, please.

  When I try to install an update to iTunes on my Windows 7 computer I get the following message: "there is a problem with this Windows
  Installation package. A program required for this install to complete could not be run. "Help, please.

  Hello..

  Try this support article > If you see an error message "Windows package install" when you try to uninstall iTunes from your PC