Pavilion g6 2213sa: upgrade of the APU - computer laptop won't start

Similar Questions

• HP G62 Notebook Pc: MY COMPUTER LAPTOP WON, T START

  my laptop won, t start when I press the button nothing! It doesn, t start

  Tell me please help me

  With most HP laptops the first thing that do is to unplug power removed battery and push and hold the power button for 15 to 30 seconds to reset the machine.

  After you have done that reset for the power back in and try again, sometimes get you lucky.

• B5Z56UA #ABA: the upgrade of the apu in laptop

  I CAN PUT in A A10 apu in this laptop one of my friends say that the motherboard will not accept it, so I see if I can.

  The A10 - 4600M would fit into the motherboard. There is a big job and not be tempted by chance. The above manual is a necessity. You should achieve a significant update in the calculation of power and a modest increase in video power. You would be upgrading both the traditional "processor" and the video "card."

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Failure of Windows 7 Anytime Upgrade on the new computer laptop

  Hello

  We just bought a new Asus laptop that came with Windows 7 Starter as standard.

  A week later, we bought an Express Upgrade Home Premium 7.

  The upgrade has failed at first time around; following the advice of the community, I tried the following:

  Check all updates;

  Installed the CheckSUR tool fix;

  Disabled user account control;

  Disabled antivirus;

  The hard drive to find errors;

  Profiled selective startup in MSConfig.

  In the end, I got was a "invalid product key" - which it is not.

  Windows displays as entered, and I have SP1.

  As a last resort, I have reset the specifications of the factory and tried the Express upgrade as the first thing on the PC 'cost '. Upgrade failed after 25 minutes.

  In the very final resort, I reset all the solutions above workaround to the specifications of the factory again, re-directed (except by disabling the antivirus because I have not reinstalled which again - there is only Windows Firewall between me and the world wide). Update failed.

  I just tried to disable the Windows Firewall and tried the upgrade - my product key verified program, was asked to accept the terms, told me it would be as little as 10 minutes - but now it's to say the upgrade button that I entered is a version of Windows that does not work with the Express upgrade... but it IS an Express upgrade.

  It took nine days so far - please you have the magic answer? Thank you waiting...!

  You have already done most of what I have posted, but it can't hurt to read and review as it is possible that you missed.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  -------------------------------------------------------------------

  (A) if at any time the upgrade fails: run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  --------------------------------------------------------------------

  (B) If Internet Explorer is not configured as default web browser,
  you need to make sure and try the Express upgrade.

  --------------------------------------------------------------------

  (C) stop and restart your computer.

  (1) implementation of the reinforced system - method #2 tool (download and run the tool: "Checksur.exe")
  http://support.Microsoft.com/kb/947821
  (System resources, such as file of data, even in the data memory and registry data, can develop inconsistencies during the lifecycle of the operating system. The system update tool attempts to resolve these inconsistencies).

  (2) disable any security software before attempting to upgrade

  (3) disconnect external devices of unneccesarry.

  -------------------------------------------------------------------

  (D) if still Anytime Upgrade fails, disable the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4 restart the computer

  5. repeat the process "Anytime Upgrade"

  To start the upgrade process:
  Click on start/search and enter the words: Express upgrade
  Then, in the list of the search results, click on "Windows Anytime Upgrade".
  Then follow the prompts on the screen anytime upgrade.
  Basically, all you need to do is enter the Windows 7 upgrade product key.

  Another method:
  (Located at the top right) Start/Control Panel/small icons option / click the "Windows Anytime Upgrade".

  -------------------------------------------------------------------

  (E) if it continues to fail, try the following 3 methods:
  Method #1
  (1) run Chkdsk and see if it helps.
  Click Start / type: CMD and right click 'CMD' and select 'run as administrator '.
  At the command prompt, type: chkdsk /f /r
  Restart your system, hard drive of your computer is analyzed to find errors and will try to correct them.

  (2) run the Memory Diagnostics to look for problems with the system hardware. Type of memory in start search and press ENTER to open the memory diagnostic tool open. Click restart now and check for problems. Your computer will restart and will start the diagnostic program. Please note the reported errors.

  Method #2
  1. click on start, type: "msconfig" (without the quotes) in the box and then press the ENTER"" key.

  User account control permissions: If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under "Selective startup", uncheck the "Load Startup items".

  4. click on the 'Services' tab, click to select the box "hide all Microsoft Services" and then click on disable all.

  5. click on 'OK '.

  6. When you are prompted, click "Restart."

  7. once the computer has been restarted, check if the problem is resolved.

  Method no. 3
  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:

  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  -Anytime Upgrade may not work for all versions of Windows-

  Note: Retail 'Full' or 'Upgrade' product keys will work when you use the Express Upgrade feature.
  Upgrade Express 'can' not work (check with the manufacturer of the computer support team) for users who have the OEM and integrators systems product keys, this also applies to the VL (Volume License), - MSDN Academic Alliance (MSDNAA) or products keys that do not work and take over the Anytime Upgrade option. KMS users consult your administrator before attempting to perform an Express upgrade.

  J W Stuart: http://www.pagestart.com

• Upgrading RAM and now computer laptop does not start for Windows 7

  Hi all

  I'm working on laptop HP Pavillion G7-1070us of my father, and I'm having a problem starting after the installation of 8 GB of RAM.  I upurchased 2 sticks of 4 GB of DDR3 PC10600 UN buffered, NON ECC RAM of Frys and everytime I go to start the laptop it throws an error that can not load Windows and offers to run the repair or start normally... little matter that you select, it goes back in the loop of what prompts to repair or load... The BIOS recognizes all the 8 gb... have you tried 2 different sets of different manufacturers (Patriot and Crucial). As soon as I pop 2 2 GB sticks in it boots fine... I even tried to start the the Windows 7 DVD to repair windows, but he always comes back in the loop... I tried the two current and previous BIOS without success... Help, please

  Hello

  Sorry, I've updated the link:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Pavilion+G7/Pavilion+G7-1070us-upgrades.html

  Kind regards.

• ASUS computer laptop won't start after I shut it off through the update

  I restarted my asus k55a and then he kept asking for me to update an asus live update, so I did and it updated and he kept asking so I kept pressing updated 3 - 4 times later it was about 2 hours of update and I need to go to sleep , so I turned it off while she has been updated then when I turned on it, in the morning, the screen lights up but is just blank and nothing don't be going on I tried to reset hard, I left on more than 8 hours and I put a bright light in front of it to see if the backlight had gone but none of it works no wrighting or something happens to the screen no longer do you know how to fix this? If you do not respond pls it would help me a lot thx

  If you shut down a computer while it is busy to be updated, you can bribe and break completely erase all your files and data and having to get a professional service or replace this computer.

  You should contact Asus for help at this point and see if they can send you a recovery CD to use.

• I am entitled to an upgrade, as I have CS3 I want to buy a new mac and install the upgrade on the new computer. How can I do this?

  I am entitled to an upgrade, as I have CS3 I want to buy a new mac and install the upgrade on the new computer. How can I do this?

  If you get two new machines and the CS3 allows you to get the price reduced for a year then you should certainly pursue it.  However, I always recommend people to try before you buy.  When you get the new machines install the trial version and make sure that it works for you correctly.  Once you have confirmed it correct functions, then you can purchase the subscription.

• I have re installed Windows vista on the same computer laptop and now its says product key is already in use.

  I had Windows vista on my laptop after 1 year I had to re install windows, but now its always tells me that the product key is already in use (I use the product key for the same computer laptop I installed previously on).

  Please tell me why this is happening as I am once again the installation on the same laptop.

  Thank you

  I see what is the problem.

  You have a corrupted Licnsing store-

  Please try the steps below to re-create the store with the correct data.

  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.

  You may need to enter your COA key and activate it.
  Once complete, run another report MGADiag and post back with the results

• Error message: "The operating system not found" and the computer laptop (Windows 8) starts do not.

  Original title: computer laptop (Windows 8) starts do not

  Laptop: Sony Vaio

  Processor: core i3 with 4 GB of memory
  Operating system: Windows 8
  Before going to sleep, I was using my laptop & it did not work properly. then I download something, so I put on and fell asleep. When I woke up I found a message on the screen, operating system not found. I restarted. Now it starts and appearance of the new as usual Windows logo, but it does not move, I mean points keeps moving in a circle with the Windows Logo, but nothing happens.
  I tried in the BIOS and it detects the hard drive, it means that hard drive still works.
  How to solve this problem?

  Hi Sunil,

  Thanks for the reply.

  I suggest you to contact the manufacturer for activation. If you still have problems you can contact the customer support team, you can see the steps in the link below.

  Get help from Microsoft Windows activation

   

  https://support.Microsoft.com/kb/950929?WA=wsignin1.0

  Let us know if you need assistance.

• question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4?

  question: How can I open CS5.5 after the migration to the new computer laptop w / Mac OS 10.8.4? I got a dialog box indicating that I had to run Java SE runtime (or something to that effect), when I approved it, then try opening cs5.5 Indesign, the program closed unexpectedly at startup. If I uninstall program & reinstall, my documents will be free, or are they toast? Help!

  Hi rabbit Art,.

  Migration from one machine to the other problem most of the time. So I recommend you to reinstall the software. Concern is that none of your documents will be made.

  Kind regards

  Romit Sinha

• My computer just won't start in safe mode...

  My computer just won't start in SafeMode... after the signs up to 'safe mode' and pushing enter... it stops (no signal) and normally restarts itself! I need to get rid of malware and infections in the start up... hmmmmm

  First, run a full scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If nothing detects remove, also try run system restore and your system at a time before the problem happens.

• HP dv9000 vista laptop won't start. Cannot 'fix '; BIOS Diagnostics: all GOOD except Hard Drive check result: replace the hard drive NEED the data from this hard drive!

  HP dv9000 vista laptop won't start. Attempt to restore repair result several times cannot be made online. BIOS ran diagnostics, everything was good except the hard disk, hd chk result: replace the hard drive. F11 entered to access advanced hp Recovery Manager options tempted towards the top of the entire disk, all files show while listing to back up, attached to my external hard drive current over the back with success.  Plugged external on another laptop, new files since the previous backup are no where.  Should I buy a new external hard drive and repeat the backup via Recovery Manager Advanced Options or should I remove the internal hard disk and insert it into a case and apply in usb on another laptop to view the files.  I know when my computer crashed, I had too many windows/tabs open and too much process and tried to interrupt a process and I confused his little brain and now he has Alzheimer's disease.  I am freaked because I'll lose everything 2012 including some very important documents and about 50 000 pictures HD (yes I learned my lesson backup!) I am in crisis mode because I recently became sick and my photos and documents is vital for my next year of chemotherapy and radiation. Please advice are extremely appreciated. Thank you

  Hello

  This backup after pressing F11 is a HP backup option, not a Microsoft option.

  I suggest that you contact HP or ask their Support Forums.

  http://h30434.www3.HP.com/

  It's the normal advice I'd give to record data; but we have no idea of the State of your hard drive.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  See you soon.

• HP Pavilion dv6 6c51ea: upgrade of the dv6 6c51ea ssd and ram wifi card

  Hello
  As of late I thought the upgrade or replace my laptop, but I have a few questions to help me decide.
  First ram cited the speed of the processor is listed as 1066/1333 hz, however I can not check it on the site of hp and the crucial site recommend ddr3 at 1600 hz, the site hp also says is that 8 GB however apparently due to the fact that it was released on Windows 7 However the processor can support 16 GB max memory support and since upgrading to win 10 my system would be doing, is this correct?
  
  What kind of improvements I see by installing an ssd (Samsung evo 850) 500 GB?
  
  And finally the wifi card could be readily available and upgraded to the new ac wifi to use the router to HQ and speeds mon is provides and I pay!
  
  So basically will be the ssd, 2 x 8 GB 1600 mhz sodimm ram, and a wifi amd card equipped for the £300 it cost would he give me the jump in performance for his money as the cpu and gpu are rather dated now (i5 2450 m and radeon 7470 m) when a new system with an i5 4th gen with 1 GB graphics , 500 GB and 16 GB of ram, ssd would cost about £900 what would be the main benefits
  
  Thank you very much
  
  Shott

  I stand well partially corrected. The 8 gig RAM max was on the technical page of HP and the maintenance manual says maximum 16 concerts. As you note, it will run at 1333 mhz, but yes you can install 16 gigs and upgrade to Windows 10 made no difference there. You may installed 16 concerts with all 64-bit operating systems.

  Here is the Manual:

  Your repair manuals

  Page 28 - 29 a the list of supported wireless adapters EXCEPT the

  Module Intel Centrino Advanced-N 6230 WLAN 631956-001

  a mistake is well-documented. The part number is actually a single band card Ralink and other versions of HP of the 6230 Advanced-N used in some business models will not work in your laptop. We beat this horse dead on many posts here.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• NEED to recover files from the xp computer that does not start.

  I changed startup on an old xp computer programs and now it does not start (I can accidentally put driver not run at startup). blue screen; STOP: 0x0000007B (0xF8992528, 0xC0000034, 0x00000000, 0x00000000) xp sp3 no safe mode without recovery does Center no disc. I just bought a computer to try to recover the information with win 7 but can not slave the drive to him because it is ide and the new computer is too modern. I need to save files are important on the xp computer is it possible to save them?

  I met this BSOD error several times, and the following fix usually (not always) allows the hard disk to be read by the system...

  -Boot your system and access the BIOS Setup
  -It will vary with different systems, but try to press "F2", "F10" or "delete".
  -If you need help with this step, let me know the model of the system, and I'll see what I can come up with
  -In the configuration of the BIOS, looking something like "Device Boot Configuration"
  -Go to the hard disk configuration and change the current option
  -Here are the most common options that I can think of:
  -SATA IDE, AHCI, (newer systems have more options, such as IRRT)
  -If the current option is "SATA", change it to "AHCI" or "IDE".
  -If the current option is 'DCIS', change it to "IDE", etc...

  It's just a quick run through a possible fix, without knowing the details of your system!  If you need more detailed help, I would like to know the details of the system, and we'll see what we can do!

  -Riley

• reloading the files of the external hard drive to the new computer laptop

  I'm trying to reloaded files etc. from an external hard drive to my laptop. I took the files of my old office that was on is way out, so just in case I lost them all I copied them. I tried setting up my external hard drive and transfer just a couple of files just to see if it would work. I sent them to my desktop from my laptop and they also went to my documents, but once the hard drive is disconnected files will not open. I do not know what I'm dong wrong as I am not very computor spirit, so that the answers would be useful in silly English thank you. Sorry to be so long-winded.

  Sheila

  Hello @shedeval

  I understand that you have copied your files on an external drive from your old computer.

  You tried to copy the files to the new computer, but when you disconnect the external hard drive the files are no longer accessible.

  I think that you have created or copied a shortcut to the new computer and not the actual files.  When you're logged out outside the new computer had more disk access to open files.

  I would like to redo the copy and when you finished externally, log out and then try again.

  Good luck!