Pavilion g6 - B7D20UA #ABA: LEDs blink code... 7 times?

First of all, I know that when the problem started.  It was the day after I bought it, and it was abandoned on floor 3 ft.  I tried to use an external monitor, changed the LED screen, "well-known work" ram and hard drive and reset all connections, nothing helps.

The main issue I have is that all I get trying to start is a trouble of 7 flashes code.  Everyone that I have never heard talk of an HP flashes 7 times.  As you can imagine, I told more than 10 times with the same result.

This laptop is salvagable?

Johnmuir wrote:
Yes, I changed the screen, which changes nothing. I had the same code flashing before and after.
The LED caps lock flashes 7 times.

Have you tried flashing codes here? Looks like a motherboard failure... ???

HP BIOS Beep Codes
Computer does not start and emits a LED or beep Code

Tags: Notebooks

Similar Questions

  • Z820 - button Power LED blinks 4 times (red) with beep... bad card (Quadro 4000) graphics?

    Hello

    My Z820 at the office is suddenly having a few hardware malfunction.

    When I turn on my machine, the PSU/system fans don't rev and the Power LED button flashes red with a beep 4 times.

    According to this page of troubleshooting, this indicates a faulty PSU on the new UEFI computers:

    HP desktop - computer does not start and emits a LED or a beep Code

    Section "code beep and LED descriptions.

    Get the exact model of LED as the example of "power failure".

    Then, I got a new power supply replacement. I still have the exact same model LED and beeps...

    So, I have drawn deeper and found that when I removed the Quadro 4000 card graphics and then put on my machine, the power button LED is lit in blue (led code ' computer-S0 (normal operation) "") and all the normal spin fans.

    The Quadro card seems to be the culprit...

    Unfortunately, I have no alternative graphic card laying to verify this around, I'm waiting for a replacement of the graphics card (via HP service) to arrive tomorrow.

    Is it possible that the power LED button code (4 times red with beep...) has nothing to do with a bad power supply and that my Quadro is bad?

    Dries

    Dry... that Z820 has been giving you headaches.

    Many fault codes have not changed since the previous workstatons.  I hit this series of beeps of error in the past, and often doesn't mean that the power supply itself is the cause.  It can be a hardware device to the bottom of the chain causing a power surge to power, triggering his "crowbar circuit: fault protection

    http://en.Wikipedia.org/wiki/crowbar _ (circuit)

    Here are the instructions to deal with this series of beeps of a previous HP xw technical and repair.  Note the number 2 in the troubleshooting instructions... usually you don't have to go down to 3, in my experience.  I think that you have already found the faulty unit:

    Loss of power.
    1. open the access panel and make sure that the power cable is properly
    connected to the system board.
    2. Locate the faulty device by removing all devices and then reinstalling one at a time
    until the workstation fails. Replace the device at the origin of the failure. Continue to add
    devices to make sure that everything works correctly.
    3. check the power supply feature.
    a. turn off the AC power.
    b. remove all cables internal power on the system board.
    c. connect the power supply.
    ● If the power supply fan turns and the BIST LED lights, then the
    power supply is good. Replace the motherboard.
    ● If the power supply fan does not turn or the BIST LED does not
    light up, replace the power supply.

  • Pavilion dv4-1155se blink Code

    Hello

    I have a HP Pavilion dv4-1155se that turns off randomly. I noticed that the Caps/Scroll Lock button flashes 4 times when I try to turn it back on. After a few tries more I am able to re - turn on the computer and use it as usual.

    So, that means the code? I found this link, which indicates that it might be the "Graphics controller not functional. Is this true for the dv4-1155se?

    Thank you.

    Yes, those who blink codes are for your model.

    It is to have some kind of graphic problem.

    As a last resort, you can try a bios update if there is a newer than the currently installed version.

  • Satellite A100-847 battery led blinks 11 times, absence of motherboard?

    Hello

    14 months (only 12 months warranty), I have a Satellite A100-847 was a laptop perfect, but 2 weeks ago the ac-adaptar falls down and since then that if I push the power button the battery orange led blinks 11 times with the same length, but nothing happens.

    ASP did not now what this flashing means but think I have a motherboard problem.
    Now I found on ebay a Satellite A100-153 and my question is, is this the same motherboard, because it's also 945 PM.
    (Sorry for my bad English)

    [Satellite A100-847: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=120570&DISC _ MODEL = 1 & service = EU]

    [Satellite A100-153 | http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=DE&PRODUCT_ID=112714&PRODUC T_ID = 112714 & toshibaShop = false]

    THX.

    It seems that two laptop computers support the same motherboard as the Satellite A100-847 and Satellite A100-153 belong to the same series of PSAA9E.
    This series uses the same drivers and the same BIOS so I think that the mobo must also be the same.

    PS; I think that it is a motherboard problem too. Such a code is displayed only if a hardware failure has been detected on the motherboard.

    Best regards

  • blinking code

    I have a laptop HP Pavillion 1326dx G7. Code flashing on the num locks and locks of cap is a 1. The power led lights up continuously.

    According to the HP website, a 1 blink code indicates a bad treatment.

    I've taken steps to replace my processor with a new. The code remains.

    Now, I'm looking to replace my motherboard because it can be taking power or something else on the table, causing the code.

    In shopping for a new Board of Directors, I am puzzled because there are a lot of numbers and no two sellers give the same corresponding item number request.

    My motherboard numbers DAOR23MB6D1 REV: D the sticker on the port of memory gives a 649948-001 part number which should I use to shop for a new motherboard?

    Is it possible to exchange a slightly different motherboard that has been used in the G7 series by HP?

    Any help would be greatly appreciated!

    Hey, Spark,.

    I recommend you replace the computer laptop everything.  Just my 2 cents.  Cards system can be a challenge to replace and costs are generally in favour of getting a new pc.

    If you decide to go, use the guide posted here: http://h10032.www1.hp.com/ctg/Manual/c03538328.pdf

    The parts listed in the guide are supported.

    -wes

  • Precision M4400 POST diagnostic LED flash codes

    An Precision M4400 don't POST.  After a few seconds the NumLock, CapsLock and ScrollLock LEDs all blink.

    Page contains a link to the page but this link is not correct.  Codes flash Latitude page describes the storage LED, battery LED and wireless LED blinking, but on the Precision M4400 all lights are off and the flashing of the LEDs is NumLock, CapsLock, and scroll stop.

    On systems older like this, when all three (num/caps/scroll) flash (aka Christmas tree syndrome), the motherboard is bad.

    Bay-Wolf.com/portpostcodes.htm

  • Power moves from AC to battery at random, with a strange LED flashes code

    Hi all

    From time to time, on a regular basis, I'll have my laptop go battery power even if it is plugged.  When it does this, the led power and battery charge flashing start.  This happens usually after the laptop has been for a little while, but sometimes it will start to do so as soon as I turn it on.  Often, I can run just after that I have unplug the power adapter and plug it back, although it generally takes a few tries, and it is usually only a temporary fix.

    Really, I just want to know what it means when the two leds blink.  I could not find this combination in textbooks or anywhere online.

    I have a HP Pavilion dv8000 (dv8310us) Windows XP.

    I appreciate the ideas.

    Yes, I think he fixed it.

    I went and bought a new universal power adapter a few days ago and the problem has occurred again since then.

    In fact, it happened once the first time I used it, but it turns out I had the adapter put half a volt too low.  So I think the power, and load it LED two flashing simply means that the adapter does not have enough power, meaning mine was indeed that went wrong.

  • Portege Z930 - 14L - DC orange led blinks 8 times and green ECO light led

    Portege Z930 - 14L. I can't boot from the last power since.
    The domain controller in the orange Led blinks 8 times and eco green light led is lit.

    DC IN flashing ornage indicator indicates a problem with the power supply. Initially, you should try plug the adapter HAVE an another power outlet. If she does still not work, you should contact Toshiba ASP (authorized service provider)

    Electronic supply on the motherboard is probably the problem.

  • Product number HP Pavilion G7: D1C20UA #ABA

    I would like to know if I could put the touchsmart on this laptop, product number HP Pavilion G7: D1C20UA #ABA, I upgraded my laptop to Windows Professional 8, so if you can give the link to where I can download the software suite.

    Hello

    No, you need hardware and software, no magic software can turn to material non - TS TS.

    Kind regards.

  • HP pavilion product # BK462AA #ABA need new hard drive

    I have hp pavilion product # BK462AA #ABA Model P6517c which is a failure to the smart test. I need to replace the hard drive but I'm having a hard time finding one. Can you tell me what hard drive could run to replace this model? It may be an improved version of what I have have(500gb) now. Never had this problem with Sony computers...

    Hello:

    You can install any desktop hard drive SATA II/III 7 200 rpm of 500 GB to 1 TB.

    Some recommendations...

    Best - Western Digital Caviar Black

    Good - Western Digital Caviar Blue

    http://www.Newegg.com/product/ProductList.aspx?submit=Ene & N = 100007603% 2050001306% 20600003340 & IsNodeId = 1 & name = 7200% 20RPM

    Paul

  • Satellite L30 PSL33E won't start at all - the LED blinks 6 times

    Hello

    My poor mother is quite upset! Its Satellite L30 PSL33E just died.

    It completely off and now won't start at all.
    Orange light flashes six times when you press the power button.
    No hard drive, fan, screen or any other noise / activity.

    She tried without the battery.

    A kind of hardware failure, I guess.

    Any ideas what this blink code means?

    Thanks in advance,
    D.

    I put t know what the code means, but you can read it. short means 0 and 1 long

    In any case, the error code means that a hardware failure has been detected on the motherboard and motherboard replacement could help you?
    Why?

    because what is really hard to fix a motherboard for laptop very s.
    It especially not possible if you n t s have sufficient knowledge, experience, and special tools.

    I think that either you contact the ASP in your country and ask a difficulty or you'll have to buy a new laptop ;(

  • HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

    Hello

    My HP Pavilion dv6-WQ685UA #ABA needs a main battery replacement and is still covered by the warranty.

    I always thought that this laptop can't run then 1 hour unplugged but still ran about 30-45 minutes before the battery is discharged (recommended HP). A few days ago I received this message when starting upwards:

    Main battery

    Failure ID-U360G0-000624-XD0002J-C0DL03

    Product ID-WQ685UA #ABA

    Replace the main battery.

    So here I am. How do I get a new battery, sent me? Thank you!

    Hello:

    It is a forum of consumer to consumer.

    Nobody here help you with warranty issues.

    You will have to contact HP support support.

    Contact HP on the link below for the country you live.  Select the option 'technical support after purchase.

    http://WWW8.HP.com/us/en/HP-information/summary/WW-contact-us.html

    Paul

  • G6 Pavilion: Pavilion g6 system disable 5592 1206 code

    Like many people I get system disable after trying to make my laptop Pavilion g6 system disable 5592 1206 code. If someone could help, I would be very grateful.

    Hello

    No problem

    Enter: 40689829

    Kind regards

    DP - K

  • On my laptop - HP Pavilion dv7, the audio led on the keboard remains orange when I turn on and outside. When on this subject that is supposed to be a white light showing that it is on. How can I fix it? It happened when I upgraded to Windows 7 from Vis

    On my laptop - HP Pavilion dv7, the audio led on the keboard remains orange when I turn on and outside.  When on this subject that is supposed to be a white light showing that it is on.  How can I fix it?  It happened when I upgraded to Windows 7 from Vista.  Help, please?

    Windows Update has nothing to do with the upgrade of Windows. Try posting in one of these specific forums Win7:

    http://social.answers.Microsoft.com/forums/en-us/w7install/threads

    http://social.answers.Microsoft.com/forums/en-us/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • ProBook: Why this company offers a software to 'fix' HP capslock blink codes?

    I thought that capslock blink codes on HP laptops were talking or bad material/connections or a BIOS corrupted.

    I just wanted to know how bliks mean what error and google for it. I landed on THIS page, and it is said that capslock codes are produced by errors in Windows. And then they offer software to fix it.

    I'm not a mistake of capslock, I do not download this software. What is c? A virus?

    And could you be it someone please let me know how the codes mean what is the error in a notebook ProBook 4530 s?

    Thank you.

    Hello @johnwinchester

    Thanks for posting on the HP Forums.

    To get your question more exposure I suggest you post in the trade forums since the ProBook s 4530 is a commercial product. You can do so here: laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE

    Support of your product page can be useful in the meantime: laptop HP ProBook 4530 s

    Also, here's a generic HP page related to your question about the beep and flash codes, and you're right, these types of errors usually point to hardware or BIOS of one type or the other problems:

    Computers laptops HP - the computer does not start and the lights blink or computer beeps

    In general, my best recommendation for any random online site, or in general any what unsolicitied aid, just apply your common sense and do not forget the old adage of Caveat Emptor.

    I hope this helps!

Maybe you are looking for

  • How to edit an xControl when placed in a vi?

    I hope that it is a beginners question: I am to evaluate the use of xContols in an application I'm developing. As soon as I place an xControl on a façade, it locks the xControl so that I can change is no longer any of the properties. Y at - it a menu

  • C3150 all-in-one

    You can print wireless through my home network to the C3150 which is connected to my desktop running Windows 7.  Our other laptops in our House are running Windows 7 and Windows 8.  Thanks for your help.

  • SBH80 battery level reporting

    How can I get a message format from the seller-means sbh80 of a current battery level? What service responsible for this information? Cannot find any information about it. I have samsung s5 and sbh80 and I would like to make a free app for battery fo

  • My icons are blacked out with a black box.

    I tried to wipe the cache through cmd.exe icon and restart explorer.exe, but when I restart my computer completely the same problem from happening again. How can I solve this problem?

  • How to see the types (SIT) special specific information for a particular responsibility

    Hi allI have 2 SIT, DEPT for example and other EMP.by default the two SIT appear when I click on Special Information request in self-service employee liability.Here, I want to create a custom RESP and I want to display a SIT say Dept.Can anyone sugge