Portege Z930 - 14L - DC orange led blinks 8 times and green ECO light led

Similar Questions

• Portege Z930 - 14L + Dynadock U3 crashes after a few minutes of use

  Dynadock freeze, after a few minutes using or when I play the movie on youtube in a few seconds.
  Laptop works fine now, but the display through dynadock solidifies (freezes and the picture will become.) Its stil game.

  Toshiba Portege Z930 - 14L, Toshiba Dynadock U3
  Both aged two weeks. Coercive power disconnect on dynadock and display of the restoration.

  I have test the driver cd, driver of site Web of Toshiba and last pilot displaylink official sites.

  Hello

  What USB port to connect the Dynadock U3 device did you use?
  Have you tested the Dynadock U3 as part of different USB ports?

  AFAIK the Z930 Portege - 14L supports a USB 3.0 port on the right side and two USB 2.0 ports on the back.

• Maximum memory for Portege Z930 - 14L

  Hello

  I have a Portege Z930 - 14L with 8 GB memory and wonder what is the maximum memory I can add? I saw the following in the description, but I don't understand if this means that the maximum is 12 GB (4 GB onboard + 8 GB expansion) or 16 GB (2x8GB)

  Standard system memory: 8 192 (4 069 + 4 069 onboard) MB
  maximum extension: 8 192 MB
  technology: DDR3 RAM (1,600 MHz)

  Thank you
  Markus

  If I understand this right info your a Portege already maximum RAM.
  Is that your laptop Portege can manage with 8 GB memory max. On board, there are already 4 GB and there is only one slot of RAM available for upgrade that also contains a 4 GB RAM module.
  In other words, your laptop is already maximum RAM and upgrade is not possible.

• Portege Z930-12J - WiDi updated to version 3.5 and greater

  Hi, I have to update WiDi in front of my computer to 3.5 or more because it is necessary to establish the connection with the smart TV. He needs to also update the graphics drivers, but none of these drivers are available via TEMPRO.

  When I try to install it directly from the Intel support site it says that the graphics driver was not authorized by Toshiba. Thanks for any suggestions! (But I would rather the upgrade of my victory to 8.1 and by using Miracast.)

  PC - Toshiba Portege Z930-12J
  OS Win7

  > When I try to install it directly from the Intel support site it says that the graphics driver was not authorized by Toshiba.

  AFAIK, you can install the adapter driver Intel graphics by Device Manager.
  You need to download the driver Intel (zip) including the single driver files page.
  You will need to perform the update by using the Advanced installation procedure that will allow you to link directly to the zip package.

  The system would automatically take the driver of this folder files.

• 10 years, sony kp-51ws520 red led standby blinks 9 times and won't turn on or turn off

  I have an old Sony kp-51ws520 under 10 who has no picture or sound. The Red standby light continues to Flash a series of 9 blink. It does not react to the power power button. Power reset doesn't work or change anything. To turn off the game, it must be disconnected. Suggestions? Thanks a bunch! LJ

  Hello

  You can try this Thread. This migh be useful.

  Thank you...

• Re: Sore eyes using Portege Z930 screen

  Hi all

  After appr. 30 min of work with my Portege Z930 I get the pain in my eyes and, later, headache.
  I can't just work properly with him.

  I tried all known by me options to configure the graphic display, Intel utilities and a Windows, change text size and so on, but to no avail.
  Text is a little fuzzy looking.

  I'm 12 years old laptop user, changed a lot of it and it's my first laptop with such a poor quality screen.
  Or is it a default and I should ask replace the matrix?

  Appreciate all the advice of many,
  Sergey

  Hello

  The device supports a common 13.3 "(HD) TFT color LCD."
  The max resolution is 1366 x 768.

  So I can't find big differences between this screen and others, used in other books

  Of course 13.3 is not really a big screen I prefer notebook with a screen size of 15-17.
  The 13.3 is too small for me

  I don't know... maybe there is something wrong with the LCD display... then maybe you should ask a service provider to verify the part... but this is just my personal opinion...

• Satelite L775 used high power - orange light blinks 5 times

  Greetings,

  I bought my Toshiba Satelight new l775 7 months ago, it's so crazy. It used to be on, I use the laptop connected to the adapter 4 to 8 hours a day, then the laptop goes unused and unplugged for 16 to 20 hours a day.

  This is my 3rd phone, I know that I put more tension on the previous two (HP and Acer). I've never had a laptop go on me this quick, even this acer laptop $ 300 crossed more tension and never went out in the 15 months that I got it.

  My laptop backup is a HP of 4 years, I've had it for 4 years, its fell several times, used and abused still underway! I just had to level of ram and hard drive. But, this Toshiba! She was so beautiful when I saw him!

  I have never dropped it, never spilled something on it, so why she put me through that stress at a bad time?

  A bad time because even if I'm under warranty, I'm leaving on vacation in 2 days! I need it, I'm not trying to take my old HP that came out in 2008.

  I can't afford to send my Toshiba for 2 weeks, not immediately.

  Today, my anti-virus software was his typical scheduled scan, I didn't charge the laptop, because I was out of work, so when I leave the laptop gets used more and charged additionally. I look at the laptop and its judgment, I just thought, O... my battery died, I would plug in the adapter and do some reading. Nothing good happened. 8 hours later, I worked on it for more than 8 hours, I searched all over google, many forums, none of the following solutions worked for me.

  Disconnect the battery and press power for 30 seconds
  Unplug the adapter and press power for 30 seconds
  Disconnect the battery and the adapter and press power for 30 seconds

  (of course after the 30 sec thing, I tried turns on normally, with or without battery and power adapter).

  I pulled the little battery round, hard drive, memory sticks (even changed the 2 around and I tried each one solo) I tried without any ram. I unplugged all the excess material, the only extra things I had was my usb mouse, but I unplugged that, even pulled the CD-ROM drive.

  I removed all water-cooling, open the laptop to see if I saw something a coward, I don't see anything, the part where the adapter will seem a little loose, but it seems to go all the way and fine. I pushed hard and still nothing.

  One thing I will say... I read at least 8 other fairly new poster of Toshiba satellite owners with similar problems of their laptop does not turn on. This isn't a good glance, since this is the first product of Toshiba, that I bought it and it costs $500 more than my acer laptop which gave me no problem in my 15 months of owning...
  I'm not belittling Toshiba immediately, this problem might be a small question (I hope), I could be my fault, so I'm not belittling Toshiba again because I like a lot about this laptop, especially the graphics!

  Return to this topic after watching the discussions of people with similar problems, I noticed, nobody had the same exact problem I'm having. See most of the threads I have read, people would still get the orange light when the battery has been driven. I ONLY get the orange light when the battery is in the laptop. I try and power without the battery and nothing happens, no light flashes. Many other people were always other color lights or lights in different locations, my only light flashes 5 times, the second place left and is orange.

  The only light that blinked in the last 8 hours is the second light from the left (I think it's the power light) and it flashes orange or maybe its red light... but when I press the power (I tried holding, tapping, etc...) that the orange light blinks 5 times and stops, nothing happens I don't hear any readers of spinning, everything is just dead.

  Thanks for the time and help!

  Hi a8000

  Looks like you already tried all possible solutions
  The flashing light indicates that there is a possible hardware failure, but it is not possible to say what part is malfunctioning, it might be the motherboard
  However, the guarantee seems to be valid so don t waste time and report it to the service provider in your country, they should solve this Toshiba!

• Satellite A105-S2031 battery LED blinks 11 times.

  Everyone has been able to diagnose this problem until the fault? A few days ago, this very laptop just turned power off and since then the battery led just blinks 11 times and nothing more. I disassembled the laptop and everything looks fine on the card (not the type to be skittish around electronics. Worked on cell phones for the last five years). Anyone have any ideas?

  Have you tried to boot up your laptop with AC only (removed battery) power?
  I really can't believe that you can find the reason why this happen if you take apart your laptop. I assume that there must be a problem with electronic control gear.

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G

• Audio choppy and distorted on Portege Z930 after update of Win7 for Win8 64

  I just wanted to share a tip with you that cost me some time to work, about the sound reproduction of a Portege Z930.

  When I got my new Z930 - 14L, he was running Win7.
  I tried everything like you do when you get a new machine and it worked fine - including the audio playback.

  When I updated for Win8-64 since the CD that came with the computer, everything still seemed to work very well and I had not changed any driver or Setup.

  However, after a few minutes, the linenn of audio playback. It choppy, distorted, interrupted, stuttering and I was shocked.

  Oddly enough, as soon as I turned my attention to the computer again, reading was OK again - but no screen saver came and no power saving mode has come in so little time. I knew that this was no hardware problem (because it worked in Win7), it was not a driver problem (because the first 5 minutes, the sound was pristine), he was not a ground loop, (as many have suggested) because it sounds differently.

  Thanks to another forum, I discovered that it is actually the combination of Windows Defender, Win8-64 Pro and the audio driver that causes this. If the device is idle for a few minutes, the Defender thinks it's a good idea to use idle time to scan the SSD - causing interference with audio playback. Of course, you cannot simply disable or stop the central antivirus process, that would ruin some the whole point. :-)

  _So I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the problem disappeared! _ it's probably the only time where the installation of an antivirus suite SOLVES a problem. :-)

  BTW, this is not probably limited to this antivirus product, simply play a bit with the Defender.

  Best, Yuppie

  > Then I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the problem disappeared! It's probably the only time where the installation of an antivirus suite SOLVES a problem.

  Thank you much for sharing this details here in the community.
  I guess that the information could be useful for others who have these problems of his fellow men.

• Portege R100 - code flashing Orange

  Hello world

  I am Michael from the Germany. I used Toshiba laptops since the 80th end starting with my 1 computer, the Toshiba T1000 w/out of a hard drive...

  I repair many of them personally, I always use 3-6 in my parallel House: o))) especially the series portege 34XX, which is my fav with the tecra line, but anyway.

  Now, I have a new problem I've ever had. I bought a few R100 to built me a fine. A motherboard orange blinking error code: 00101100. I tried the known common things: w / or w/out but nothing!

  Anyone know what hexacode is behind this blinking and what prob is hidden behind the right hex, please?

  Google will find different answers and hexas as read by behind: 0011... and find 32 h blabla but I want to ask you first of all, I believe that in this area; (o))

  until later + better
  Michael

  Hi Michael,

  It s really great to hear you are using Toshiba laptops since the 80th Clipboard :)
  I also use for Toshiba laptop for a long time and they make really good products. Good quality and price, how it should be.

  Regarding your problem: I think that you need a service allowed because here it s a user forum to only where you can talk with people like you me. So I doubt anyone can give you an exact answer what s wrong

  On the Toshiba site, you can find a list of aspic
  Alternative buy an another R100 where you can exchange and test each part step by step, it would also be an option if you repair a lot of yourself! :)

• Satellite A100-847 battery led blinks 11 times, absence of motherboard?

  Hello

  14 months (only 12 months warranty), I have a Satellite A100-847 was a laptop perfect, but 2 weeks ago the ac-adaptar falls down and since then that if I push the power button the battery orange led blinks 11 times with the same length, but nothing happens.

  ASP did not now what this flashing means but think I have a motherboard problem.
  Now I found on ebay a Satellite A100-153 and my question is, is this the same motherboard, because it's also 945 PM.
  (Sorry for my bad English)

  [Satellite A100-847: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=120570&DISC _ MODEL = 1 & service = EU]

  [Satellite A100-153 | http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=DE&PRODUCT_ID=112714&PRODUC T_ID = 112714 & toshibaShop = false]

  THX.

  It seems that two laptop computers support the same motherboard as the Satellite A100-847 and Satellite A100-153 belong to the same series of PSAA9E.
  This series uses the same drivers and the same BIOS so I think that the mobo must also be the same.

  PS; I think that it is a motherboard problem too. Such a code is displayed only if a hardware failure has been detected on the motherboard.

  Best regards

• Portege Z930 - 12 H - update of the BIOS and McAfee Endpoint Encryption?

  The update to the latest BIOS (Ver.6.70) for my laptop Portege Z930 12 H comes with the warning:

  «If you use the BitLocker Windows Drive encryption, please temporarily suspend (or turn off) before BitLocker Drive Encryption updated BIOS.»

  The same caveat applies to McAfee Endpoint Encryption, which is used on my laptop and I can * not * pause or stop? Or can I apply the upgrade of the BIOS safely?

  Thank you.

  As much I know Bitlocker isn't related to Antivirus from McAfee software and two security tools are not connected to each other. BitLocker is a tool for Microsoft Windows and McAfee is a 3rd party software preinstallation on the device.

  I found a nice how doc on the update of the BIOS.

  [How to upgrade the BIOS on Toshiba laptops | http://aps2.toshiba-tro.de/kb0/HTD9502M10000R01.htm]

• Portege Z930-146: BSOD running Win 7 64 bit - support pointers and advice

  Hello

  First post following the latter (academia / business) purchase of a Portege Z930-146 (serial number XC141056H, short PT235E part number).

  Configured the pre-installation software 64 - bit W7, local installed, delivery to the primary user (the boss).

  User reports 3 BSOD in a few days - I have the mini-decharges and made first order analysis using blue-screen display:

  PAGE_FAULT_IN_NON_PAGED_AREA (ntoskrnl.exe)
  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (dxgkrnl.exe)
  MEMORY_MANAGEMENT (ntoskrnl.exe)

  We really are the guys from UNIX, so it is not familiar territory.

  I just updated the BIOS but now have a long (50 +) list of possible drivers also be updated. One at a time to download and install?

  I ran the diagnostics memory and disk - without errors or warnings that are reported.

  Can someone identify a likely problem, or direct me gently in the direction of the road to official support of Toshiba please or suggest next steps?

  Thank you in advance,

  GLM

  Ntoskrnl.exe is a Microsoft kernel boot and the dxgkrnl.exe seems to have something to do with the chart.

  I recommend to check if the update of the display driver would improve the performance of the system.
  Then visit the Toshiba UE driver page, select the Satellite Z930 PT235E and download the latest display driver Intel.
  Z930-146 was equipped with chip Intel HD Graphics 4000, so you need the Intel driver.

  You can also try to download the driver directly from the Intel page since they always provide the latest version.

• Adding additional partition D for Portege Z930 with that 256SSD

  I just got a new portege Z930 i7 with 256 ssd and Win7 pro 64. It starts with 4 partitions already installed.1.46Gb recovery, 217 GB C, 8 GB hibernation and a 11.9 primary with the only option to remove.

  I can shrink the C drive to 110 GB offering 110 GB unallocated. But if I try to format the unallocated space it tells me that this will change to dynamic disks and there is not enough space.
  I have a D drive for the data. How to do this?

  Hello

  I recommend to use the 3rd party software called * Gparted.*
  It of based on the system Linux and you could create bootable USB flash memory stick containing Gparted tool.

  It is great for partition management.