Pavillion 500-164: System Z drive

Similar Questions

• Pavilion of 500-164 usb controller driver

  I have a 500-164 Pavilion on which I have installed win7 because win 8 is... Well, lets not go. Now, the usb ports do not work. It is said that there is no driver. This driver does not work?

  BTW, some ports are labeled SS E (where E is the simbol of wireless USB) and some are just the E (without SS in front). Is this a new USB type?

  The keyboard and mouse only function in the ports of E. a key drive will not work in any of them...

  Hello:

  You probably need this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-104117-1&cc=us&DLC=en&LC=en&OS=4063&product=5231479&sw_lang=

  .. .and this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-105965-1&cc=us&DLC=en&LC=en&OS=4063&product=5231479&sw_lang=

• Hewart Packard 500-164: Original Boot Configurtion is grayed out in the configuration of the system on the general tab.

  Hello, I have 10 windows in a model of Packard Hewart # 500-164, and I can not exit Safe Mode.  When I go on Win + R and type in msconfig under secure boot it is unchecked but under general in selective Start Up the original Boot Configuration is grayed out and cannot uncheck.

  Hi @BreBruce-Tampa,.

  Welcome to the Forums of HP's Support. It's a good place to find the help you need, other users, HP experts and other support staff. I came across your post and wanted to help.

  Please go through support documents original boot use dimmed in Windows 10 configuration & Exit Safe Mode

  If the problem persists, I recommend you try to perform a system recovery that will repair the PC back to factory shipped settings.

  Perform a recovery of the system (Windows 10) HP

  If this link does not work, contact support HP phone to get recovery media to reinstall windows on the PC: HP Customer - Support Contact

  Note: Recovery will wipe out everything from the PC. If you have something important come into contact with some stores to get your backup data.

  I hope this helps. If you need assistance, please let me know.

  Kind regards

• Remove the hard drive and optical drive on HP pavilion 500-164

  Hello

  I was eager to build a new computer and was hoping to use the hard drive and the optical drive from the Hp Pavilion 500-164 to reduce their costs. I'm confused as to how to remove the optical drive, because I removed the two screws on the left and don't know how to get to the other side as it wouldn't come out. When you remove the hard drive, the SATA cable wouldn't come off, so I stopped here and would like some advice on how to remove the hard drive from its Bay.

  Thank you

  Hello

  Please use the following guide:

  http://support.HP.com/us-en/document/c04100685

  Kind regards.

• I bought a 500 GB external hard drive and did a full system backup. Then he told me that I need a floppy disk? After backup system restore was complete. What?

  I had a scare last week and thought that my computer crashed.  In the end, everything was fine, but I decided I had to do a full backup of the system.  Bought 500 GB external hard drive.  Full backup of the system ran through the performance Wizard mode & maint.  When finished, he gave me a saying of the warning, something like "insert a diskette to run the system restore" something like that.  Does this mean that if I have a major failure which is on the external hard drive is null and avenue?  Floppy?  What is everything?

  The disk is a boot disk that is used to access the backup files.

  The following items may be worth a visit:

  Windows XP - back up your files
  http://www.Microsoft.com/windowsxp/using/Setup/maintain/backupFiles.mspx

  How to backup easily your entire system in Windows XP
  http://free-backup.info/how-to-easily-backup-your-entire-system-in-Windows-XP.html

  Windows XP Backup utility
  http://vlaurie.com/Computers2/articles/xpbackup.htm

  For a different backup method that will include all your
  programs, personal files and settings, you can
  consider buying imaging software.

  2011 disk Imaging Software comparative review of products
  http://disk-imaging-software-review.TopTenReviews.com/

  Paragon offers a free version that can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free backup & Recovery (Advanced) 2011
  http://www.Paragon-Software.com/home/BR-free/features.html
  (the name of the file to download is: br_free_advanced.msi)

• Pavilion 500-164: motherboard replacement raises Questions

  
  

  Thanks, Malygris1, for your very comprehensive answer.  Unfortunately, I'm looking forward and installed the new Board of Directors.  For those faced with replacing a motherboard HP, I will elaborate on my trip.  The most important step was in buying for the motherboard.  I have no HP, but from a dealer on Ebay.  I DID, however, carefully note the model of the motherboard AND the designated HP part number of alternatives on a small paper on the motherboard label.  The same motherboard model is used in several models of HP Office; but, if the number of HP spare parts is matched, the info on the model should be on the motherboard.

  My original problems were solved with the installation of the new Council.  After a router struck by lightning, the ethernet port had stopped working, and when told to stop, or in standby mode, the machine would invariably restart.  The new motherboard solved both problems, which seem to be related to the power surge.

  I installed the new Board of Directors of the Windows 10 updated 500-164 and held my breath I have it powered for the first time.  I was pleasantly surprised to see that everything looked the same as when I left it.  Recognized support assistant the new Board of Directors as part of a desktop computer 500-164.  I have not tried; but I hope that the recovery media will work, if necessary.  Malygris1, do you think that if Support Assistant recognizes the info on the model, the recovery disks will work?  I'm curious to know how it works, but, if not, no big deal, as I now have a new image Acronis 10 Windows installation, which works perfectly on the 500-164 Pavilion (without "Pitfalls", as some have reported with audio, etc. of the wireless card.).

  My second concern was whether or not Windows is always activated with the installation of the new Council.  He said that he "Windows is not activated.  ... Rats and other profanity.  I know it can take time to be put in correspondence with the info from Microsoft, so I updated the bios and checked the rest of the ports for the features of the machine.  I returned in configuration/system Panel and he told me that the activation information were "unavailable" - different from the message 'not active' sooner.  I've been waiting on this screen for a few minutes and the message changed to "Windows is activated"!  I was ready to make Microsoft telephone activation and I had run a keyfinder to get the original MS product key for Windows 8 from the hard drive, but I didn't have to use both methods.

  So, in summary, if you want a card mother 'replacement', shop for the exact number of spare parts HP; not only the MFG part number.  It will save you a lot of grief.  Obviously, if you want to 'upgrade' from your motherboard, all bets are off, because it's a totally different scenario with different issues to deal with.  My project was a complete success at a cost of $103 for the new motherboard and several hours of my time.

• HP Pavilion 500-164 recovery disks came with instructions in Spanish, don't read not Spanish

  Good afternoon everyone.   I have a HP pavilion 500-164, barely a month and a hlaf old, which came in a kind of loop to the HP after a few minutes loading screen, a pink screen came up with a frown face alomng with a message that I have never read coiuld because his was too fast. I now have my recovery disks, but they sent the instuctions in Spanish. I do not read Spanish very well at all. I need to know if there is anythign iNeed know are to make this recovery instructions to tell me if I could read smoothly. I hope it's clear enough for yall to get what im saying lol.   Also if someone has a link to the instructions I have but in English please . Thank you for taking the time to read this and have a nice day.     (also can I just throw the disc and it will take care of itself?)  Don't want to screw up this high and still learning everything so if you have info anyu willo help I would very much apreciate. New Z'al

  You are the very welcome.

  You do not have an additional drive or in addition to disks 1-4, there is one labeled accordingly.

  Thus, you would have answered no to the question asking if you have an extra recovery disk.

• HP HD5000s Personal Media 500 GB external hard drive is missing from the computer.

  Original title: HP HD5000s media personal 500 GB external hard drive.

  Drive K disappeared from my office. How can I get that back to use my. HP 500

  Hi Ron,

  Don't you see the external hard drive listed in Device Manager?

  You can also check if the hard drive is listed in disk management.

  a. click the Start button > Control Panel > system and security > administrative tools.

  b. double-click on computer management.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the left pane, under storage, click Disk Management.

  Please post back and we do know.

• Can you put a 500 g SATA hard drive in Pavilion a750w?

  Can you put a 500 g SATA hard drive in Pavilion a750w?  The bios is version v3.26, and the operating system is XP with SP3.  40 gig HD is full and you are looking to replace it but do not know what the size limit is with this bios version.

  Here are the specifications of your HP Pavilion a705w desktop. This is based on the assumption that you converted the 5 and 0 and the fact that you mentioned a 40 GB hard drive.

  You already have the most current version of the BIOS of your computer and running the most recent service pack of Windows XP. Your computer and the operating system should support a drive of 500 GB without problem. The only problem is that your computer isn't any SATA ports, only 66/100 IDE (PATA). Look at local retailers and online for the IDE drives.

• the desktop pc Pavilion 500-164 to date of Windows 8 for windows 8.1

  My dealer told me that the 500-164 Pavilion had windows 8.1.  This isn't.  Even if the Assistant on HP site says that it has not been tested, has anyone successfully done?

  Hello:

  I do not have your PC but I don't see any reason why it wouldn't.

  HP provides W8.1 drivers for this model on its support page.

  Before moving to W8.1, I'll make sure to create the W8 recovery media so that if for some reason, something doesn't work well in W8.1, you can restore the operating system and software from the PC to its status of "out of the box.

  And you should do anyway even if you do not upgrade to W8.

  Check out this guide to make your W8 recovery media set.

  http://support.HP.com/us-en/document/c03481733

• Missing Base system device driver

  I bought my Elitebook 8560p a few weeks back off a friend. Wiped the whole laptop and installed a new operating system (Windows 7 Ultimate 32 bit). I thought I installed all the drivers but im told Device Manager still lack a "Base system device" driver Help please?

  Hello

  It is very good

  The driver you need is for the Card Reader JMicron Media which can be downloaded and installed from the following link.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5056949 & prodNameId = 5056950 & swEnvOID = 4055 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-93389-1

  Kind regards

  DP - K

• Toshiba 500 GB external HARD drive is no longer detected - after only 1 hour

  Hey,.

  I finally got my Toshiba 500 GB external hard drive delivered today. I had no problem setting up and to turn my laptop on, it immediately recognized and I started to transfer things for her.

  However, I accidentally stood on the USB cable to the HARD drive and disconnected. I plugged it in, but my computer did not recognize.

  Nothing I've tried has worked, always, the laptop does not recognize the hard drive.

  Please help, I've only had the one hour thing, and it already does not work! I really hope that I have not only lost £56...

  All advice is appreciated, thanks in advance.

  NEW: My father just tried plugging the HARD drive in the desktop PC is on the ground, and as soon as the USB when it is in the port, you stop the computer... causing him to lose a lot of important business email, he wrote. It starts the computer, the USB and you stop again... and this has happened 3 times until he gave up. What on Earth is wrong with this thing? I've never heard of a USB cable, stop a computer permanently, or a hard drive that does more after an hour of use...

  Post edited by: Sam_V631

  The USB port on the HARD drive may have been damaged and may be causing the PC detect a short power.

  You can try another USB cable? If it is not the cable, then the HARD drive should be sent to a Service Center for repair or replacement.

• HP pavilion graphics 500-164

  I found a GPU which seem to me to fit in to the hp pavilion 500-164 examination does not require an external power connector. I am not sure if they match or get a sufficient power, need a greater power or 300 watts.

  Hello

  These articles HOWTO HPshould be useful.

  The NVIDIA 750 is a double wide you will need to insert a screwdriver in the adjacent PCI slot rear panel flat-blade and wiggle backwards until it's free then use pliers if necessary to finally remove the empty slot machine Panel.

• ProLiant DL380 Gen7: Not found Base system device driver

  Hello

  I need a Base system device driver

  PCI\VEN_0E11 & DEV_B204 & SUBSYS_3305103C & REV_03
  PCI\VEN_0E11 & DEV_B204 & SUBSYS_3305103C
  PCI\VEN_0E11 & DEV_B204 & CC_088000
  PCI\VEN_0E11 & DEV_B204 & CC_0880

  Hello:

  There is no W7 drivers for this device.

  See if the driver for Windows Server 2008 R2 works, which would be the equivalent driver.

  http://h20566.www2.HPE.com/hpsc/SWD/public/detail?sp4ts.Oid=3884321 & swItemId = MTX_313bf6ab46dc458191c563ff5c & swEnvOid = 4064

  Try to install the driver manually if automatic installation method does not work, because this driver is not in favor of the ID you have posted.

  [HewlettPackard.NTx86.5]
  DeviceDesc % = CpqCiDrv_5, PCI\VEN_0E11 & DEV_B204 & SUBSYS_B2060E11
  DeviceDesc % = CpqCiDrv_5, PCI\VEN_0E11 & DEV_B204 & SUBSYS_3304103C
  DeviceDesc % = CpqCiDrv_5, PCI\VEN_0E11 & DEV_B204 & SUBSYS_3305103C

• ProLiant DL360 G8: Missing Base system device driver

  Hello

  I have a HP Proliant DL360 G8 with Windows Server 2008 R2 Enterprise SP1 server, but when I go to Device Manager I get lack of base system device driver. Please I need know what driver to install.

  Properties of the device:

  Hardware LDS:

  PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C & REV_04

  PCI\VEN_8086 & DEV_0E26 & SUBSYS_18A8103C

  PCI\VEN_8086 & DEV_0E26 & CC_088000

  PCI\VEN_8086 & DEV_0E26 & CC_0880

  Location information:

  PCI bus 0, device 4, function 4

  Compatible IDs:

  PCI\VEN_8086 & DEV_0E24 & REV_04

  PCI VEN_8086 & DEV_0E24

  PCI VEN_8086 & CC_088000

  PCI VEN_8086 & CC_0880

  PCI\VEN_8086

  PCI\CC_088000

  PCI\CC_0880

  Best regards

  Hi Rubendiazmarino,

  Try these drivers for your server:

  • HP ProLiant iLO 3/4 Management Controller Driver Package for Windows Server 2008/2012 X 64 (U.S., International)
  • HP ProLiant iLO 3/4 Channel Interface Driver for Windows X 64 (U.S., International)
  • Handset identifier Chipset for Windows Server 2008 R2 (American International)

  After installation reboot, your server for these driver to work.

  Yours faithfully,

  Ryan