Payroll Online gives "the selected action is not available. The cause may be related to security"error

Similar Questions

• "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Hello.

  I recently got a new computer. I have installed the printer software and it successfully print a test page. He will appear in devices and printers. Device Manager says it's working properly. However, it will not print anything else. No PDF no Word document, no web pages. Right now I get the error message that I put in the subject of the message, on a gray page. I turned it works again, I removed and put the cables. I don't know what else to do. Anyone know what is happening here?

  The convenience store has found nothing wrong.

  I reinstalled the printer software.

  Once again, the error message is; "The selected printer is not available or has not been properly. Check your printer or try to select another printer.

  Thanks in advance.

  For troubleshooting, please follow the links with the steps below.

  Click on the link below to fix common printer problems:

  Solve printer problems

  Follow the steps below on how to print attachments in Outlook 2010:

  Print attachments received in e-mail messages. Outlook 2010

  Follow the steps indicated by the ZigZag3143 (MS - MVP) on this link:

  Print from Outlook.com

  Follow the steps below on how to erase and reset the printer spooler:

  Clear Printer Spooler queues and activate the Spooler Service Print spooler is the main component of the printing interface. The print spooler is an executable file that manages the printing process. Print management is to retrieve the location of the correct printer driver, load the driver, queue function calls high level in a test of the work, schedule the print job for printing and so on. The spooler is loaded at system startup and continues to run until the operating system is shut down.

  Keep us updated.

• Scanning E-mail gives SMTP response and is not available. I'm not technical; How can I fix it?

  Scanning E-mail gives SMTP response and is not available. I'm not technical; How can I fix it?

  original title: scanning
  We really need the message full error, but for you to save time...
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3 
   
  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm
   
  Note that for many programs AV, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck e-mail scanning when the option is available.

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• online purchase of windows anytime upgrade, you selected is currently not available error?

  bought two identical from best buy with hopes of windows 7 premium-64 bit laptop. I have win 7 Professional, so I tried to use the windows anytime upgrade. one successful. a fails. overlook a request for information (name address, phone, etc.) of the billing and you request then click next to go on the payment. I got the error:

  an error has occurred:
  for the windows anytime upgrade online purchase, you have selected is not available.

  No rememdy or suggestion what is wrong. I can go back to portable sister and run the Upgrade Advisor to ultimate just to rule out connectivity issues.

  someone had this problem and got around him?

  Call Microsoft at 1-877-696-7786 . Carey Frisch

• Command actions are not available

  I have worked with PSE since version 2, but haven't posted in this forum so if I break a "rule", I apologize in advance.

  With the help of PSE 13 (new in this version) on a hp laptop of pc - Win 7 - a lot of memory and disk space

  I downloaded from a very reputable site actions and cannot get them to run. Error message: the command 'make' is currently not available.

  I downloaded and unpacked fresh copy x 3. Removed and reloaded PSE 13 x 3. So I thought that the problem was in stocks until what I ran across some of the default actions that came within the PES 13. Borders and lose the weight seemed to work but when I arrived at Sepia Toning, I got the same error message. The message gives me the option to 'continue' or 'stop' but the action does not work correctly if I chose 'continue '.

  Thanks in advance for your help.

  Roberta

  It may also be that the PSD since lightroom's 16-bit per channel.

  When you have transferred the psd from lightroom to photoshop elements, if you go to Image > Mode and click on 8-bit/channel, the actions work?

• File | Automate | Action: 'drive not available '.

  Hello

  PS c. 2015.0.1 on my iMac OS X 10.11.4 (el Capitan), I performed an action that ends by saving in a subfolder under the active folder running immediately. When I tried to execute the file. Automate with this action, I received an error message "drive not available '. Tried with the two saving options, "save and close" and "save to [folder location]".

  Could you please show me what can be the cause of this and how to fix it.

  Thank you

  JWC

  The image processor Script can include actions that save you in the treatment of what an action simple single step is all that is necessary for a resolution of the image.

  Image size resample not checked the setting resolution to 72.  Not a single pixel will change the document resolution setting will change from its current location at 72 DPI.

  Canvas size add size or reduce the size of the document canvas.  If it is a background layer its size will change to the new size of the canvas, added canvas areas will have a pixel color adds the and increase in the size of background layers one or the reduction of the background will be cropped to the new pixels size size of the canvas.  A background layer does not support the transparency and its always the size of the size of the canvas to the current document. Other sizes of layer will not change when you change a document canvas size. However the new canvas size can reveal that pixels where the old canvas size cut.

  Your original append said the action was save files to a folder is the folder that is not available or you have to check the batch option to substitute recorded save as steps?

  Hello

  Running PS c. 2015.0.1 on my iMac OS X 10.11.4 (el Capitan), I performed an action that ends by saving in a subfolder

• RoboHelp 9 - need to remove .gif from a theme folder but action is not available.

  I removed all the topics of a folder in RoboHelp 9. I now want to delete the record, but he has a .gif file that is under the folder. I right click on the image, but deleting is not available. How can I remove the .gif so I can then delete the folder?

  Thank you

  Michele

  Hello

  Chances are RoboHelp believes that the image to be used somewhere in the project. RoboHelp is funny like that. He dislikes you sawing off the branch on which you are majestically perched.

  Are you able to right click on the image in the project finds Manager and choose Properties? If Yes, click on the "used" tab and see what reports RoboHelp. This should give you a clue where to look.

  See you soon... Rick

• Dynamic action real action is not available in the APEX 5.0

  Hi all

  We did the/import export of APEX 4.2 to version 5.0 of the APEX, but I am unable to find the real Action of dynamic Action in APEX 5.0. Can someone help me on this.

  

  LnTInfotech wrote:

  We did the/import export of APEX 4.2 to version 5.0 of the APEX, but I am unable to find the real Action of dynamic Action in APEX 5.0. Can someone help me on this.

  

  Assuming that this refers to you being unfamiliar with the default constructor of app UI Page Designer in APEX 5.0. See "dynamic Page Designer action management" for more details. True/false actions appear as nodes in the dynamic Action of the left pane of the designer of Page navigator tab:

  

  If you do not use the Page Designer, you can move on to the familiar view of the component:

  

• C$-action is not available on the computer.

  Hello

  I'm fighting with weird issues with my c$-part for a few days.
  Patches and the known workaround solutions do not work.

  -the machine responds to the ping
  -If I use the IP address I also can't access the share
  -using the \\hostname\c$ does not work on mine and other machines
  -using the work \\127.0.0.1\c$

  -using the \\hostname\ refers firstly to a folder I created on my own computer

  --> shows the resolution of problems on another machine 'windows cannot communicate with the machine' - printer sharing are enabled...

  You have any ideas on what I can do?

  Hello

  We have my apologies for the late reply.

  I suggest you to refer the suggestions of Amrita M replied on December 23, 2010.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/network-error-0x80070035-the-network-path-was-not/a0033200-5d96-40a7-ABC6-e243921206bd

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Please answer with results so that we can help you further.

  Thank you

• Some files on the server may be missing or incorrect error.  Help?

  I get this error message on a number of pages, and most of the pages on my site are not displayed correctly.  I just publish the site to the catalyst for business and it works fine, but when I upload to FTP on my hosting site, the site does not work properly.  So my last post all pages have been working properly.  Before this last I publish only edited one of the pages, but I think because I had just updated Muse to the latest version (from the previous version) all pages and files have been re-uploaded.  I tried to remove the site and re-download and no change.  Any ideas you have would be appreciated.

  Hosted site: www.smartwithart.net

  Catalyst for business: smartwithart.businesscatalyst.com

  How the files were downloaded? They have been downloaded using the built-in file > Upload FTP host? Or file > export as HTML and downloaded with another tool?

  A couple of (at least museutils.js and musewpslideshow.js) .js files are distorted. It is hard to see how that would happen. The fact that the error does not appear when you host on Adobe BC means copies of these two files in the installation of your Muse are not distorted, so the damage must have occurred either during the loading, while on the server or in the execution of files. If you use file > export as HTML and then manually download these two files by replacing the versions on the server, which can solve the problem. (You can open the site exported on your local computer to confirm that the error does not occur for the exported files.) If manually replace the files with copies not decomposed working does not work, you will need to work with your hosting provider to determine what your server is change these two files.

  In the museutils.js file damage appears as a repetition of a part of the header of the file, the "ADOBE CONFIDENTIAL' and pointed out, roughly in the middle of the file:

  

  Similar damage appear at the bottom of the musewpslideshow.js file:

  

  This type of repetition of part of a block in a file may be an early indication of lack of storage device. It is possible, the server has a bad disk, or it is possible when Muse goes to read the file that has, within your Muse, your drive is not reliable play the file. If this is true, then I expect the locally exported files to be distorted.

• 'play action' object is not available

  Hello

  try to use applescript to perform an action as part of an workflow program multi

  Everything works until the Illustrator action part when I get an error object 'Play Action' is not available

  say application "Adobe Illustrator".

  Activate

  script 'Standard covers' of 'covers Standard '.

  end say

  
  

  This happens usually when the desired action is not loaded into the actions palette under the name you are trying to call with.

• Muse of update and changes made to the homepage now get this error... error message by calling the selection function: security error: cannot read the iframe content of html document

  Changes made on my homepage and it looks a lot like the preview in the browser, but when I upload it to my server I get the below error message. Help, please!

  

  It is common for opening a locally implemented Web site containing social widgets or any other third part code to generate errors of security because it will be loaded in the browser using the file:// Protocol. When a site is presented as a preview of Muse (Muse or in the browser) or transferred to a hosting provider, it is served using the http:// (or https://) Protocol and security errors do not occur.

  Frequently, the code of third party that comes with using social widgets or any other things that rely on the third party and/or services code is not designed to work through the file:// Protocol.

• Why is 'write' not available (grayed out)?

  When you try to write a new message in my Inbox, the option for 'writing' is not available. It may be relevant that Thunderbird handles three e-mail addresses different for me. 'Writing' is not available for all three accounts.

  What happens if you press Ctrl + N

• I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. Any ideas please?

  I have a new mini iPad 4. I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. I don't know how it came to be. Any ideas please? Thank you.

  First try a reset to see if it finishes downloading. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait until the iPad tour starts on its own.

  Check if you can remove the application. If not go into settings > general > use iCloud and storage > storage > storage management. Wait for the list of apps to open. See if the float is on the list. If it is delete it from there.