PBCS does support Norwegian as a language option?

Similar Questions

• Regional and language options have no Chinese language.

  I tried to use some Chinese software and the program on my PC Windows XP Professional. So, I went to regional and language options added Chinese language. However, there was nothing of the Chinese language. I already downloaded SP3 and some Chinese files, but I can only read Chinese on the Internet. Programs and software I have installed on my PC were able to read a part of the Chinese. where I can get more languages, especially Chinese, for me using several languages and Chinese software or program on my PC? I think that my windows xp professional only support some Western languages, which does not include the Chinese, Japanese and some Asian languages.

  Salvation FaustoF.A.V.,.

  ·         You have a Windows XP CD?

  You must install the East Asian language files before you can use them. Check out the following link.

  Microsoft Windows XP - language files from the far East to be installed on your computer

• VMmark does support win2k8 R2

  VMmark does support win2k8 R2?

  When I installed cygwin and staf, restart system.then staf service cannot start.

  A wrong happened, staf cannot start

  Hi, VMmark2 has not been tested on the Chinese version of Windows, but on the English version of Windows only. It is possible that this error could be the result of running on Chinese language Windows. Unfortunately I do not understand the error messages you have posted.

  If you remove the lines

  service stax library JSTAF execute C:\STAF\services\stax\STAX.jar OPTION \
  J2=-Xverify:none parms "numthreads 100 logtcelapsedtime enabled logtcstartstop \
  enabled"
  service event library JSTAF execute C:\STAF\services\stax\STAFEvent.jar
  

  of the STAF.cfg, then kill and restart STAFproc (C:\STAF\startSTAFProc.bat), or the client restarts, run STAF correctly?

  Thank you

  Rebecca

• Satellite L30-134 does support dual channel DDR2 memory

  Does anyone know Satellite L30 does support two mode because I've got 2x256MB and a 512 MB all Micron MT modules?

  Wojtek cordially

  Hello

  Of course, the Satellite L30-134 supports DDR2 memory modules.
  I found a few listed on the Option & Accessories site of Toshiba Europe site:

  What are supported:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• I can't open regional and language option

  Hi, I can't open regional and language option and and when I turn on any program I have to press fn and ctrl 4 times to set lathin letters, what can I do?

  Hi Christophe,

  If the restoration of the point system is not there next steps to try to fix this would be to try running SFC/scannow in command prompt. This KB http://support.microsoft.com/kb/310747 explains in detail.

  If that fails, you may need to do a repair install to solve this problem. The steps are listed here: http://support.microsoft.com/kb/978788

• I was wondering what would cause my add language option butoon must be disabled, whiles add East Asia was available.

  Need to install Thai and arbic on my xp OS.

  Hi there I was wondering what would cause my add language option butoon must be disabled, whiles add East Asia was available. any help to solve this problem. I need to install Thai and arbic on my xp OS.

  See you soon

  Hello

  You can check these links:
  
  To install the files for East Asian on your computer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/int_pr_install_languages.mspx?mfr=true how to enable support of the Arabic language in Windows XPhttp://support.microsoft.com/kb/821080how to add and enable additional languages in Windows
  http://support.Microsoft.com/kb/177561
  

• language options in outlook express 6

  I have Outlook Express 6. I don't have a language option to check spelling, etc: French. I want English, Australian preference. Director of the MS Tech phone was told to go to support.microsoft.com/kb/826519. He looked confused for this little girl, & it seemed that I would have to pay for a correction. But surely my Outlook should already give me more language options without having to pay more. I would also check the grammar.  I bought it from a reputable dealer. Please can someone please help? Thank you, Eunice H.

  Free Outlook Express English out spelling dictionary

  • Spell checker for O.E. Download of Snapfiles - Download from Majorgeeks

• Can't access language option "Add" via the control panel - > regional options and lang.

  Cannot access language 'Add' option via Control Panel-> regional control and options. lang-> keyboards and languages-> text services and input languages. When I click on 'Add', the language menu appears, but I can't take anything as the OK button is inactive. And I know I could do it before because I already added another language to my keyboard. Could you please help me?

  Thank you.

  Hello

  Please continue with the steps below...

  1. click on start, type intl.cpl in the start search box and press ENTER.

  2. on the keyboard and language tab, click on change keyboards.

  3. click on Add.

  4 expand the language that you want. For example, English (United States).

  5 expand the keyboard list, select the United States-International checkbox and then click OK.

  6. in the default input language list, click the language name - United States-International (where language name is the language that you selected in step 4) and then click OK twice.

  7. in the regional and Language Options dialog box, click OK.

  Notice that the language bar appears on the taskbar. When you position the mouse pointer, a ToolTip appears that describes the active keyboard layout.

  8. click on the language bar and then click States United International on the shortcut menu that appears.

  United International keyboard layout is selected.

  See the article below which talks about the same

  How to use the United International keyboard layout in Windows 7, Windows Vista and Windows XP
  http://support.Microsoft.com/kb/306560

  Add or change an input language
  http://Windows.Microsoft.com/en-us/Windows7/add-or-change-an-input-language

  If you don't see the language bar, right-click the taskbar, point to toolbars, and then click Language bar. For more information about the language bar, see the article below for more information:

  The language bar (overview)
  http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview

  In addition to changing the input language, you can also customize your keyboard for a specific language or format. For more information about customizing your keyboard, see:

  Change your keyboard type
  http://Windows.Microsoft.com/en-us/Windows7/change-your-keyboard-layout

  Additional information:

  What can I do with regional formats and languages?
  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-regional-formats-and-languages

  Change your keyboard type
  http://Windows.Microsoft.com/en-us/Windows7/change-your-keyboard-layout

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I was told that CC versions of Photoshop, InDesign and Illustrator are available with support right to left languages flawlessly.  Please order ME CC working with languages of the West and the Middle East.  My problem is no one that I spoke

  I was told that CC versions of Photoshop, InDesign and Illustrator are available with support right to left languages flawlessly.  Please order ME CC working with languages of the West and the Middle East.  My problem, it sucks, I talked to Adobe can tell me how to order the ME version.  I went around and for a week with them and have gotten nowhere.  I can't believe I'm the first person to ask for this version of CC and hope someone on the forum can point me in the right direction.  One last question - does anyone know how to reach support and talk to a real person?  Thank you.

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• Adobe Muse does support GZIP compression?

  I'm trying to find out how I can use the GZIP compression on my site, I built using Adobe Muse - Muse does support this and if so, how to apply it?

  Not at all relevant. You have no control over and does not report any with the design of your current web site and its components. This is server stuff and if the server stores its compressed files or even uses tablets HTTP stream is ultimately just a matter of configuration and options available which you as a designer have no control over.

  Mylenium

• 11.1.2.3 Jdev does support EL 2.2?

  Hello:
  
  Jdev 11.1.2.3 on RedHat 5.8
  
  11.1.2.3 Jdev does support EL 2.2? I thought that it would be provided with JSF 2.0.
  
  I've read that in the Expression Language 2.2 we can pass parameters to a method of bean using EL. Is this possible? If so, what is the format for the EL?
  
  I read to use a HashMap to simulate this feature, but is it necessary with EL 2.2?
  
  Where is the Oracle Documentation for the use of EL 2.2 to pass parameters to a method of bean with EL?
  
  Thanks for the help.

  Hello

  While he supports the JSF 2, it does not support EL 2.2. It will be available in 12 c and ADF/JSF

  Frank

• Apple does support HDMI 2.0 on any MacBook Pro?

  I would use my monitor Dell 4 k with my MacBook Pro retina end 2013.  This laptop does support HDMI 2.0?  I would like to use HDMI at 60 Hz.

  Thank you.

  In itself, it supports HDMI 2.0! But apparently some did work with a Thunderbolt/Mini DP adapter HDMI 2.0: CDM HDMI 2.0 cards

• Chrome still does support OSX 10.9.5

  Chrome still does support OSX 10.9.5?

  According to the page of the Google Chrome browser, this version of Chrome is said

  in support of Mac OS X to present 10.11.5 10.9.5. Chrome - the Google browser

  However, the questions and problems that Chrome continues to show Mac users,

  indicate that it is not a wise choice for Macs.  Users have found Chrome to be

  a resource eater, which affects the performance of OS X.

  We'll find a better browser to Mozilla Firefox; also Safari is always supported by

  Apple at the moment (my OS X 10.9.5 a recent version of Safari; I prefer Firefox.)

  • How to download and install Firefox on Mac - using Mozilla Firefox:

  https://support.Mozilla.org/en-us/KB/how-download-and-install-Firefox-Mac

  Browser like SeaMonkey (Mozilla) has also a customer of e-mail with browser for 10.9.5.

  http://www.SeaMonkey-project.org/

  A few others are probably OK, that won't cost you performance elsewhere.

  Good luck & happy computing!

• HP J6450 really does support WPA Wireless encryption?

  I just bought a new J6450 yesterday, and when I tried to install it as a wireless network my SSID does not appear (even if the PC just next to the printer is connected to my network).  Even when you enter the SSID manually the installation process does not recognize it. There are other SSID in the region that appear during the installation.  I confirmed that my router is broadcasting and the printer was 4 feet from the router, so I know that is not due to the intensity of the signal.

  Details of router - NetGear WPN824v3, configured for either 802. 11B or 802.11 g (auto mode), WPA encryption

  The only thing I noticed during my research it tonight is the SSID that was listed when installing 2 are encrypted and most of the HP support info and documentation related to the wireless configuration seems to refer essentially to WEP.  If the HP J6450 really does support the WPA encryption, and if so, does anyone have ideas for troubleshooting why it does not recognize my router?

  Thank you.

  Connection to the router under the admin user, then "Wireless settings" page is a Mode setting and the default value is "Auto 108 Mbps.  Using the arrow in the drop-down menu, change to "b and g" then set the channel to 'Auto' and save the configuration changes.

• 'Manage account' does not appear in the Synchronization Options - how can I fix?

  'Manage account' does not appear in the Synchronization Options - how can I fix?

  It will be great if you could share a screenshot of what you see.

  What you trying to do?

  You have already set up your sync account? This is the only case that comes to my mind that prevents you to see the drop down menu. Take a look at this article and let me know if it seems familiar: How can I set up Sync on my computer?