PC crashes illegal Instruction - 0xc000001d
I would be grateful to anyone who helps because I can't seem to find an answer elsewhere. We have a Dell Inspiron laptop running Vista. In the last months, when online and especially if viewing video or games, the system constantly (but sporadically) breaks down, stop the laptop completely. The following splashbox appears:
"AutoComplete: iexplore.exe - Application error
The invalid Instruction exception
An attempt was made to execute an illegal instruction (0xc000001d) occurred in the application at location 0x771c42eb
Click OK to terminate the program "
Until I have a chance to do something, the laptop is off. I'm a complete beginner in this field would love someone to give me a part of their knowledge!
Thank you, Neil.
original message: my PC crashes with the same mysterious error message appearing just before.
Hello
More likely to be an addon/plugin problem. In internet explorer, click on Tools / Manage Addons/enable or disable Addons. Disable all zeros not Microsoft which load automatically, and then restart Internet Explorer.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Tags: Windows
Similar Questions
-
Hello
I'm having a problem with Adobe Flash Media Server 3.5.4 (developer) installation default
'ldd' showed me some missing libs, but I managed to overcome that
'server' works well, but I can't launch "fmsadmin".
I use Debian 5.0.6 on VPS
Here's some debugging info, that I could get:
srv:/opt/adobe/fms# gdb fmsadmin GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu"... (no debugging symbols found) (gdb) r Starting program: /opt/adobe/fms/fmsadmin (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [New Thread 0xb7df16c0 (LWP 18441)] (no debugging symbols found) (no debugging symbols found) [New Thread 0xb79d7b90 (LWP 18444)] [New Thread 0xb71d6b90 (LWP 18445)] [New Thread 0xb67cdb90 (LWP 18446)] [New Thread 0xb5fccb90 (LWP 18447)] [New Thread 0xb57cbb90 (LWP 18448)] [New Thread 0xb4fcab90 (LWP 18449)] [New Thread 0xb47c9b90 (LWP 18450)] [New Thread 0xb3fc8b90 (LWP 18451)] [New Thread 0xb37c7b90 (LWP 18452)] [New Thread 0xb2fc6b90 (LWP 18453)] [New Thread 0xb27c5b90 (LWP 18454)] [New Thread 0xb1fc4b90 (LWP 18455)] [New Thread 0xb17c3b90 (LWP 18456)] [New Thread 0xb0fc2b90 (LWP 18457)] [New Thread 0xb07c1b90 (LWP 18458)] [New Thread 0xaffc0b90 (LWP 18459)] [New Thread 0xaf7bfb90 (LWP 18460)] [New Thread 0xaefbeb90 (LWP 18461)] [New Thread 0xae5bdb90 (LWP 18462)] [New Thread 0xaddbcb90 (LWP 18463)] [New Thread 0xad5bbb90 (LWP 18464)] [New Thread 0xacdbab90 (LWP 18465)] [New Thread 0xac5b9b90 (LWP 18466)] [New Thread 0xabdb8b90 (LWP 18467)] [New Thread 0xab5b7b90 (LWP 18468)] [New Thread 0xaadb6b90 (LWP 18469)] [New Thread 0xaa4f7b90 (LWP 18470)] [New Thread 0xa9cf6b90 (LWP 18471)] [New Thread 0xa94f5b90 (LWP 18472)] [New Thread 0xa8cf4b90 (LWP 18473)] [New Thread 0xa84f3b90 (LWP 18474)] [New Thread 0xa7cf2b90 (LWP 18475)] [New Thread 0xa7433b90 (LWP 18476)] [New Thread 0xa6c32b90 (LWP 18477)] [New Thread 0xa6431b90 (LWP 18478)] Program received signal SIGILL, Illegal instruction. [Switching to Thread 0xabdb8b90 (LWP 18467)] 0x08218d08 in TCSysUtil::getProcPhysicalMemoryLoad () (gdb) bt #0 0x08218d08 in TCSysUtil::getProcPhysicalMemoryLoad () #1 0x0816c999 in FCSRoot::onMonitor () #2 0x081270a5 in FCSAdminServer::onMonitor () #3 0x0816b74a in FCSMonitor::run () #4 0x0816b983 in FCSMonitor::__monitorEntry () #5 0x0821aee8 in launchThreadRun () #6 0x0821bed2 in __TCThreadEntry () #7 0xb808b4c0 in start_thread () from /lib/i686/cmov/libpthread.so.0 #8 0xb7ed384e in clone () from /lib/i686/cmov/libc.so.6 (gdb) break TCSysUtil::getProcPhysicalMemoryLoad () Breakpoint 1 at 0x8218cf2 (gdb) r The program being debugged has been started already. Start it from the beginning? (y or n) y Starting program: /opt/adobe/fms/fmsadmin (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [Thread debugging using libthread_db enabled] (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) [New Thread 0xb7ce16c0 (LWP 18482)] (no debugging symbols found) (no debugging symbols found) [New Thread 0xb78c7b90 (LWP 18483)] [New Thread 0xb70c6b90 (LWP 18484)] [New Thread 0xb66bdb90 (LWP 18485)] [New Thread 0xb5ebcb90 (LWP 18486)] [New Thread 0xb56bbb90 (LWP 18487)] [New Thread 0xb4ebab90 (LWP 18488)] [New Thread 0xb46b9b90 (LWP 18489)] [New Thread 0xb3eb8b90 (LWP 18490)] [New Thread 0xb36b7b90 (LWP 18491)] [New Thread 0xb2eb6b90 (LWP 18492)] [New Thread 0xb26b5b90 (LWP 18493)] [New Thread 0xb1eb4b90 (LWP 18494)] [New Thread 0xb16b3b90 (LWP 18495)] [New Thread 0xb0eb2b90 (LWP 18496)] [New Thread 0xb06b1b90 (LWP 18497)] [New Thread 0xafeb0b90 (LWP 18498)] [New Thread 0xaf6afb90 (LWP 18499)] [New Thread 0xaeeaeb90 (LWP 18500)] [New Thread 0xae4adb90 (LWP 18501)] [New Thread 0xadcacb90 (LWP 18502)] [New Thread 0xad4abb90 (LWP 18503)] [New Thread 0xaccaab90 (LWP 18504)] [New Thread 0xac4a9b90 (LWP 18505)] [New Thread 0xabca8b90 (LWP 18506)] [New Thread 0xab4a7b90 (LWP 18507)] [New Thread 0xaaca6b90 (LWP 18508)] [New Thread 0xaa3e7b90 (LWP 18509)] [New Thread 0xa9be6b90 (LWP 18510)] [New Thread 0xa93e5b90 (LWP 18511)] [New Thread 0xa8be4b90 (LWP 18512)] [New Thread 0xa83e3b90 (LWP 18513)] [New Thread 0xa7be2b90 (LWP 18514)] [New Thread 0xa7323b90 (LWP 18515)] [New Thread 0xa6b22b90 (LWP 18516)] [New Thread 0xa6321b90 (LWP 18517)] [Switching to Thread 0xabca8b90 (LWP 18506)] Breakpoint 1, 0x08218cf2 in TCSysUtil::getProcPhysicalMemoryLoad () (gdb) disassemble Dump of assembler code for function _ZN9TCSysUtil25getProcPhysicalMemoryLoadEv: 0x08218cec <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+0>: push %ebp 0x08218ced <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+1>: mov %esp,%ebp 0x08218cef <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+3>: push %edi 0x08218cf0 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+4>: push %esi 0x08218cf1 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+5>: push %ebx 0x08218cf2 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+6>: sub $0x78,%esp 0x08218cf5 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+9>: lea -0x58(%ebp),%eax 0x08218cf8 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+12>: call 0x8218cfd <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+17> 0x08218cfd <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+17>: pop %ebx 0x08218cfe <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+18>: add $0x18ba53,%ebx 0x08218d04 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+24>: push %eax 0x08218d05 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+25>: call 0x821810c <_ZN9TCSysUtil11readMemInfoER9MemInfo_t> 0x08218d0a <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+30>: xor %esi,%esi 0x08218d0c <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+32>: add $0x10,%esp 0x08218d0f <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+35>: test %al,%al 0x08218d11 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+37>: je 0x8218d23 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+55> 0x08218d13 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+39>: mov -0x58(%ebp),%eax 0x08218d16 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+42>: mov -0x54(%ebp),%edx 0x08218d19 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+45>: mov %edx,-0x6c(%ebp) 0x08218d1c <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+48>: or %eax,%edx 0x08218d1e <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+50>: mov %eax,-0x70(%ebp) 0x08218d21 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+53>: jne 0x8218d48 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+92> 0x08218d23 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+55>: sub $0x8,%esp 0x08218d26 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+58>: push $0x261 0x08218d2b <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+63>: lea -0xa0588(%ebx),%eax 0x08218d31 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+69>: push %eax 0x08218d32 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+70>: call 0x818c760 <_Z17DumpAssertMessagePci> 0x08218d37 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+75>: add $0x10,%esp 0x08218d3a <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+78>: xor %edx,%edx 0x08218d3c <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+80>: lea -0xc(%ebp),%esp 0x08218d3f <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+83>: pop %ebx 0x08218d40 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+84>: pop %esi 0x08218d41 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+85>: mov %edx,%eax 0x08218d43 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+87>: pop %edi 0x08218d44 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+88>: leave 0x08218d45 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+89>: ret 0x08218d46 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+90>: mov %esi,%esi 0x08218d48 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+92>: call 0x821ae70 <_Z8tcGetPIDv> 0x08218d4d <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+97>: test %eax,%eax 0x08218d4f <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+99>: mov %eax,%edx 0x08218d51 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+101>: jne 0x8218d5f <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+115> 0x08218d53 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+103>: mov %esi,%edx 0x08218d55 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+105>: lea -0xc(%ebp),%esp 0x08218d58 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+108>: pop %ebx 0x08218d59 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+109>: pop %esi ---Type <return> to continue, or q <return> to quit--- 0x08218d5a <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+110>: mov %edx,%eax 0x08218d5c <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+112>: pop %edi 0x08218d5d <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+113>: leave 0x08218d5e <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+114>: ret 0x08218d5f <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+115>: sub $0x8,%esp 0x08218d62 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+118>: lea -0x68(%ebp),%eax 0x08218d65 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+121>: push %eax 0x08218d66 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+122>: push %edx 0x08218d67 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+123>: call 0x82186a0 <_ZN9TCSysUtil14readProcStatusEiR12ProcStatus_t> 0x08218d6c <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+128>: add $0x10,%esp 0x08218d6f <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+131>: xor %edx,%edx 0x08218d71 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+133>: test %al,%al 0x08218d73 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+135>: je 0x8218d3c <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+80> 0x08218d75 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+137>: mov -0x68(%ebp),%esi 0x08218d78 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+140>: mov -0x64(%ebp),%edi 0x08218d7b <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+143>: mov %esi,%eax 0x08218d7d <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+145>: mov %edi,%edx 0x08218d7f <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+147>: shl $0x2,%eax 0x08218d82 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+150>: shld $0x2,%esi,%edx 0x08218d86 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+154>: add %esi,%eax 0x08218d88 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+156>: adc %edi,%edx 0x08218d8a <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+158>: mov %eax,%esi 0x08218d8c <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+160>: mov %edx,%edi 0x08218d8e <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+162>: shl $0x2,%esi 0x08218d91 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+165>: shld $0x2,%eax,%edi 0x08218d95 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+169>: add %eax,%esi 0x08218d97 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+171>: pushl -0x6c(%ebp) 0x08218d9a <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+174>: adc %edx,%edi 0x08218d9c <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+176>: pushl -0x70(%ebp) 0x08218d9f <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+179>: shld $0x2,%esi,%edi 0x08218da3 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+183>: push %edi 0x08218da4 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+184>: shl $0x2,%esi 0x08218da7 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+187>: push %esi 0x08218da8 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+188>: call 0x80bc7e8 <__udivdi3@plt> 0x08218dad <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+193>: mov %eax,%esi 0x08218daf <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+195>: add $0x10,%esp 0x08218db2 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+198>: mov %esi,%edx 0x08218db4 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+200>: jmp 0x8218d55 <_ZN9TCSysUtil25getProcPhysicalMemoryLoadEv+105> End of assembler dump. (gdb) q The program is running. Exit anyway? (y or n) y srv:/opt/adobe/fms# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 2 model name : QEMU Virtual CPU version 0.12.4 stepping : 3 cpu MHz : 2659.512 cache size : 4096 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 4 wp : yes flags : fpu de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx lm up pni cx16 lahf_lm bogomips : 5319.02 clflush size : 64 power management: srv:/opt/adobe/fms# cat /proc/meminfo MemTotal: 515976 kB MemFree: 13668 kB Buffers: 15688 kB Cached: 114744 kB SwapCached: 52052 kB Active: 225964 kB Inactive: 249600 kB Active(anon): 168516 kB Inactive(anon): 176880 kB Active(file): 57448 kB Inactive(file): 72720 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 0 kB HighFree: 0 kB LowTotal: 515976 kB LowFree: 13668 kB SwapTotal: 990036 kB SwapFree: 835508 kB Dirty: 60 kB Writeback: 0 kB AnonPages: 336016 kB Mapped: 22084 kB Slab: 15700 kB SReclaimable: 10356 kB SUnreclaim: 5344 kB PageTables: 3556 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 1248024 kB Committed_AS: 1060676 kB VmallocTotal: 509964 kB VmallocUsed: 3496 kB VmallocChunk: 492040 kB DirectMap4k: 4076 kB DirectMap2M: 520192 kB srv:/opt/adobe/fms# uname -a Linux <hostname> 2.6.28.7 #1 SMP Fri Mar 13 13:04:30 UTC 2009 i686 GNU/Linux
Here's what I see in admin.00.log:
2010-09-02 06:59:35 23379 (i)2581173 FMS detected IPv6 protocol stack! - 2010-09-02 06:59:35 23379 (i)2581173 FMS config <NetworkingIPv6 enable=false> - 2010-09-02 06:59:35 23379 (i)2581173 FMS running in IPv4 protocol stack mode! - 2010-09-02 06:59:35 23379 (i)2581173 Host: <hostname> IPv4: <ip> - 2010-09-02 06:59:35 23379 (i)2571011 Server starting... - 2010-09-02 06:59:35 23379 (i)2631174 Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4 - 2010-09-02 06:59:35 23379 (i)2631174 Listener started ( FCSAdminAdaptor ) : 1111/v4 - 2010-09-02 06:59:35 23379 (i)2571111 Server started (/opt/adobe/fms/conf/Server.xml). -
Some additional threads in I can get:
(gdb) info threads 36 Thread 0xa6291b90 (LWP 18840) 0xffffe416 in __kernel_vsyscall () 35 Thread 0xa6a92b90 (LWP 18839) 0xffffe416 in __kernel_vsyscall () 34 Thread 0xa7293b90 (LWP 18838) 0xffffe416 in __kernel_vsyscall () 33 Thread 0xa7b52b90 (LWP 18837) 0xffffe416 in __kernel_vsyscall () 32 Thread 0xa8353b90 (LWP 18836) 0xffffe416 in __kernel_vsyscall () 31 Thread 0xa8b54b90 (LWP 18835) 0xffffe416 in __kernel_vsyscall () 30 Thread 0xa9355b90 (LWP 18834) 0xffffe416 in __kernel_vsyscall () 29 Thread 0xa9b56b90 (LWP 18833) 0xffffe416 in __kernel_vsyscall () 28 Thread 0xaa357b90 (LWP 18832) 0xffffe416 in __kernel_vsyscall () 27 Thread 0xaac16b90 (LWP 18831) 0xffffe416 in __kernel_vsyscall () 26 Thread 0xab417b90 (LWP 18830) 0xffffe416 in __kernel_vsyscall () * 25 Thread 0xabc18b90 (LWP 18829) 0x08218d08 in TCSysUtil::getProcPhysicalMemoryLoad () 24 Thread 0xac419b90 (LWP 18828) 0xffffe416 in __kernel_vsyscall () 23 Thread 0xacc1ab90 (LWP 18827) 0xffffe416 in __kernel_vsyscall () 22 Thread 0xad41bb90 (LWP 18826) 0xffffe416 in __kernel_vsyscall () 21 Thread 0xadc1cb90 (LWP 18825) 0xffffe416 in __kernel_vsyscall () 20 Thread 0xae41db90 (LWP 18824) 0xffffe416 in __kernel_vsyscall () 19 Thread 0xaee1eb90 (LWP 18823) 0xffffe416 in __kernel_vsyscall () 18 Thread 0xaf61fb90 (LWP 18822) 0xffffe416 in __kernel_vsyscall () 17 Thread 0xafe20b90 (LWP 18821) 0xffffe416 in __kernel_vsyscall () 16 Thread 0xb0621b90 (LWP 18820) 0xffffe416 in __kernel_vsyscall () 15 Thread 0xb0e22b90 (LWP 18819) 0xffffe416 in __kernel_vsyscall () 14 Thread 0xb1623b90 (LWP 18818) 0xffffe416 in __kernel_vsyscall () 13 Thread 0xb1e24b90 (LWP 18817) 0xffffe416 in __kernel_vsyscall () 12 Thread 0xb2625b90 (LWP 18816) 0xffffe416 in __kernel_vsyscall () 11 Thread 0xb2e26b90 (LWP 18815) 0xffffe416 in __kernel_vsyscall () 10 Thread 0xb3627b90 (LWP 18814) 0xffffe416 in __kernel_vsyscall () 9 Thread 0xb3e28b90 (LWP 18813) 0xffffe416 in __kernel_vsyscall () 8 Thread 0xb4629b90 (LWP 18812) 0xffffe416 in __kernel_vsyscall () 7 Thread 0xb4e2ab90 (LWP 18811) 0xffffe416 in __kernel_vsyscall () 6 Thread 0xb562bb90 (LWP 18810) 0xffffe416 in __kernel_vsyscall () 5 Thread 0xb5e2cb90 (LWP 18809) 0xffffe416 in __kernel_vsyscall () 4 Thread 0xb662db90 (LWP 18808) 0xffffe416 in __kernel_vsyscall () 3 Thread 0xb7036b90 (LWP 18807) 0xffffe416 in __kernel_vsyscall () 2 Thread 0xb7837b90 (LWP 18806) 0xffffe416 in __kernel_vsyscall () 1 Thread 0xb7c516c0 (LWP 18803) 0xffffe416 in __kernel_vsyscall () (gdb) info proc 18829 status process 18829 cmdline = '/opt/adobe/fms/fmsadmin' cwd = '/opt/adobe/fms' exe = '/opt/adobe/fms/fmsadmin' Name: fmsadmin State: T (tracing stop) Tgid: 18803 Pid: 18829 PPid: 18801 TracerPid: 18801 Uid: 0 0 0 0 Gid: 0 0 0 0 FDSize: 32 Groups: 0 VmPeak: 303964 kB VmSize: 303964 kB VmLck: 0 kB VmHWM: 4240 kB VmRSS: 4240 kB VmData: 289212 kB VmStk: 128 kB VmExe: 3436 kB VmLib: 4888 kB VmPTE: 176 kB Threads: 36 SigQ: 2/4095 SigPnd: 0000000000000000 ShdPnd: 0000000000000000 SigBlk: 0000000000000000 SigIgn: 0000000000081a00 SigCgt: 0000000180004003 CapInh: 0000000000000000 CapPrm: fffffffffffffeff CapEff: fffffffffffffeff CapBnd: fffffffffffffeff voluntary_ctxt_switches: 29 nonvoluntary_ctxt_switches: 0
Thank you
Anton
Post edited by: james_joker
Hi James,
Sorry, it took a while to get back. It is a known problem that will be fixed in the next version of FMS. The problem is the structure of/proc/meminfo is read into a buffer of fixed size and in this case the print is too big and it overflows. This structure changes in the size of time in time, that this would explain why its incompatible.
I don't have a good workaround for the moment another alternative that remove items declared in/proc/meminfo - but this would require a change in core, AFAIK. You may need also some success with symbolic/proc/meminfo to a truncated version of the file in the view - of the FMS or maybe denied access altogether to the FMS in this hierarchical structure.
Whatever it is, question is and already fixed for the next version.
ASA
-
All programs before crashing at launch, 0xc000001d error
I recently installed the creative cloud on my Windows desktop computer (Windows 7) and wanted to download and install the first, Media Encoder, Photoshop, and After Effects. After having installed the first time, I tried to open the first and it came with "Adobe Premiere couldn't launch" and some other stuff in a dialog box, then a few seconds later another dialogue box came with "the application could not start properly (0xc000001d). Click OK to close the application. "It's the same thing for 3 other programs too. I tried to uninstall and reinstall a few times now, twice with withdrawal creative cloud completely and erase from my system. I've updated to the thing of Windows 7 SP1 has solved a similar problem for many others on this forum, does not, I read. Now I try to reinstall again. It's so frustrating, I have a huge project by Friday and will now have to do on my laptop which has a tendency to crash a lot... Please tell me you can help!
Have you checked for Windows Update and make sure that the Windows operating system is up-to-date.
Anti-virus and Anti-Malware scan once.
Also check the update of the driver graphics card. [Important]
Open programs and features in Control Panel and make sure that 2013 MSVC ++ is installed or not, otherwise download and install link below and check.
Let me know if you are still facing same issue. and a screenshot will be useful.
If possible get a screenshot of the log of the event Viewer.
-
ALL THE APPS CC CRASH BEFORE OPENING - HELP!
Hello! I recently bought the full suite of CC... I installed almost all the programs I need to use, but can not run ONE of them... When I try to open After Effects, first, Illustrator or Photoshop, I understand "Adobe (insert name here) has stopped working" and a different problem every time... Application error sometimes 0xc000001d, or ' "the illegal exception statement, an attempt was made to execute an illegal instruction (0vc000001d) occurred in the application at location 0xf0536cd5"- .
I had these two: (photoshop and first respectively)
Signature of the problem:
Problem event name: APPCRASH
Application name: AfterFX.exe
Application version: 13.5.0.347
Application timestamp: 55642425
Fault Module name: MSVCR120.dll
Fault Module Version: 12.0.21005.1
Timestamp of Module error: 524f83ff
Exception code: c000001d
Exception offset: 000000000008ca 90
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 11274
Additional information 1: f911
More information 2: f9117f2c8a52791eb11044aaa5172d0e
Additional information 3: 4cf1
Additional information 4: 4cf1f666ee18a19b219f845b0dba8216
Signature of the problem:
Problem event name: APPCRASH
Application name: EdgeAnimate.exe
Application version: 6.0.0.400
Application timestamp: 555331be
Fault Module name: libcef.dll
Fault Module Version: 3.1750.1639.0
Timestamp of Module error: 54b0d589
Exception code: c000001d
Exception offset: 00000000020f4f43
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 11274
Information additional 1:1849
More information 2: 1849c65267ce2967d89f315e1c3c4b82
Additional information 3: d622
Additional information 4: d6222fb2a574ccd05c568b2687f5afa2
But it never happened. At this point it must be something in general... Check the video card drivers, looked everywhere, did a scan complete with 2 different antivirus antimalware... Nothing... Everyone around to help him? THX!
Please check if it works: Adobe Creative Cloud applications close immediately after the launch
In the case where it is not we can always move to support more in depth. Chat one-on-one with us here: https://helpx.adobe.com/contact.html
Thank you
Stéphane
-
I have big problems with flash crash ie6 on my Windows 2000 machine. I tried to uninstall using the uninstall adobe program, re-install, etc... I can't even drive installed now because even the flash installer now blocks my browser.
A site that still has the cause of the problem is www.go2bethany.com. I have contacted them to see who it is who's in charge, but I can't get their home page loaded to get their contact information. Not sure that I would get an answer in all cases.
Here's the error message (somewat badly drafted) I get until I have only one choice - to close the browser.
SysFader: iexplore.exe - Application error
===================================
The invalid Instruction exception
An attempt was made to execute an illegal instruction
< < address of the instruction given here > >
Click OK to terminate the program
Help!OK, I solved the problem. This is the third time I looked for help here without success, so I simply started Regedit and did a slash and burn research for each registry key that contains the Flash Word and deletion of all. Now, I get a web page telling me that I don't have flash installed.
I don't think I'll install Flash again. It's too much headache and a lot of flash content is either advertising or accidental.
-
install flash player gives message tha illlegal instruction has been attempted
install flash player gives message that an attempt was made to execute an illegal instruction application error
Hello
We have identified a problem with the installer online work is not on some XP systems and strive to solve the problem. If you use Setup online, please try the Offline Installer. The Offline Installer is displayed at the bottom of the Installation problems | Flash Player | Windows page in the section "problems".
--
Maria
-
Werfault.exe error message
I get this message when you try to open the Panel and windows programs. such as the backup and restore: Werfault.exe - Application error - error exception invalid statement - an attempt was made to execute an illegal instruction. (0xc000001d) occurred in the application at location 0x7730b5f1. I can't use the execution of orders, so, how do I fix? It all started when this woman came and put his camera card in my printer and print a photo she had taken. Please help, because I'm considering a format, which I don't want to do unless absolutely necessary. Thanks for your help.
Hi Eburner,
Werfault.exe is used to Windows error reporting. This is a feature that allows Microsoft to track and address errors related to Windows features, the operating system and applications. It offers you the opportunity to send data about errors to Microsoft and to receive information on the solutions.
You can access here Windows error reporting settings: Control Panel > system and Maintenance > Problem Reports and Solutions > change settings > advanced settings
Method1
I suggest that you stop and restart the Windows error reporting service on the computer and check later if the problem persists.
(a) click Start menu and type services.msc in the search box and press ENTER.
(b) in the service list, navigate to the Windows error reporting service.
(c) right-click and click Properties now to stop the service and restart it.
(d) click on apply and OK
Check if the problem persists.
Method 2
If the previous step fails then I suggest that you perform the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Laptop will not connect to my home wireless network
I've had my laptop for a few months and my home network wireless also. My laptop has always worked perfectly until last night, I was in the living room and my phone cut because it ran out of battery. I went to restart, and when I did, NO network could be found, and several others usually appear outside my home network. The wireless switch is turned on and I rebooted the computer several times, I ran the wizards and shooters of boredom, I started the wireless zero configuration, but nothing happens. everything he says is "wireless networks could not be found", and when I click on the message, a black box appears with a message saying "windows has encountered an illegal instruction. I don't know what to do. my laptop model is a Sony Vaio, but that's what I know. My ipod connects to the wireless perfectly, so I know its my laptop that needs fixing.
Hello
Maybe this can help, http://www.ezlan.net/wireless.html
-
Turbo c ++ error: NTVDM CPU has encountered an invalid statement
every time I try to run TC in the bin folder, an error message appears:
NTVDM CPU has encountered an invalid statement
Click on close to terminate the program
I, ve tried to reinstall TC.
system configuration: windows XP SP3, 512 MB ram, 80 GB HDD, Pentium IV 1.8 Ghz
These links should answer your question, I hope:
http://forums.techarena.in/Windows-XP-support/42112.htm
http://www.TechSpot.com/VB/topic5039.html
http://www.RealGeek.com/forums/NTVDM-CPU-has-encountered-an-illegal-instruction-44455.html
Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they should be.
-
Recently, I started to learn C++ and made some simple programs in Microsoft Visual C++ 2010 Express. However, when I started programming a video game, I noticed the limit of 300 line and had a little trouble trying to include several source files, so I decided to simply program programs and experiments in the IDE and programming stuff any longer in Notepad. I tested this point by creating a simple Hello World program and save it as an executable file. I got the error "NTVDM CPU has met an illegal instruction." under the heading "16-bit MS-DOS subsystem". I'm probably doing something I'd usually do in the IDE in Notepad, causing it to show this error. Also, I did a SFC scan and it detected that there was nothing wrong with the system. Here is the code for "helloworld.exe".
#includeusing namespace std;int main(){cost< "hello="" world"="">< endl;="">return 0;}Hello
You can still post the question in the forum provided above. You can also search support forums for the compiler you use or another general programming forum for assistance.
Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
original title: Trojan warnings
Received phone calls from a number of Adelaide telling me that my computer will crash in two days, if I do not open a session and follow his instructions because of Trojan virus. Nobody gave his name and phone number and said she is Microsoft? She also told me that it was free and part of Windows security. How will I know if it is authentic or not?
Hello
It's a SCAM
Microsoft does NOT contact you unless you have for them to
read this:
http://www.Microsoft.com/security/online-privacy/msName.aspx
Microsoft has none of the unsolicited telephone calls to help you fix your computer
In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.
Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.
Treat all unsolicited sceptically telephone calls. Don't provide personal information.
If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.
If you think you might be a victim of fraud, you can report it. For more information, see: what to do if you think you have been scammed.
-
I built a server service web application in 11.1.1.7 Jdeveloper and deploy it on weblogic 10.3.6 to the demands of the external partner is used.
I tested the app using the tool SoapUI and everything works fine and I get as a response from the server.
Use case:
1 - the customer can not get as a response from the server. They always receive 500 internal error from Server
2 - I have faced this problem before with other clients because the client sent not writing xml format that is accepted by the server. Problem is solved at the time when they start to send the right xml format.
3 - newspapers, I see the following stack (part of it): (Google, I knew there's something wrong with xml, the client sends to the server: wso2 - how can I manage this in Wso2ESB that does not Respone to the Client - Stack Overflow)
4. now I need a way to know exactly what is to reach my server as xml. Is it possible to save the queries coming to the server weblogic. xml Without knowing what will happen on the server, I don't know what is going wrong in the xml file.
< error > < com.sun.xml.ws.transport.http.HttpAdapter > < BEA-000000 > < could not create a SOAP message because of the exception: XML reader error: com.ctc.wstx.exc.WstxParsingException: Illegal treatment target instruction ("xml"); (not case sensitive) xml is reserved by specs.
[row, col {source unknown}]: [10,16]
com.sun.xml.ws.protocol.soap.MessageCreationException: cannot create SOAP message because of the exception: XML reader error: com.ctc.wstx.exc.WstxParsingException: illegal treatment target instruction ("xml"); XML (not case sensitive) is booked by the specifications.
[row, col {source unknown}]: [10,16]
at com.sun.xml.ws.encoding.SOAPBindingCodec.decode(SOAPBindingCodec.java:295)
at com.sun.xml.ws.transport.http.HttpAdapter.decodePacket(HttpAdapter.java:294)
at com.sun.xml.ws.transport.http.HttpAdapter.access$ 500 (HttpAdapter.java:102)
to com.sun.xml.ws.transport.http.HttpAdapter$ HttpToolkit.handle (HttpAdapter.java:519)
at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:253)
at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:141)
at weblogic.wsee.jaxws.WLSServletAdapter.handle(WLSServletAdapter.java:172)
to weblogic.wsee.jaxws.HttpServletAdapter$ AuthorizedInvoke.run (HttpServletAdapter.java:708)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
at weblogic.wsee.util.ServerSecurityHelper.authenticatedInvoke(ServerSecurityHelper.java:103)
to weblogic.wsee.jaxws.HttpServletAdapter$ 3.run(HttpServletAdapter.java:311)
at weblogic.wsee.jaxws.HttpServletAdapter.post(HttpServletAdapter.java:336)
Update 1: I found that I need to add the following lines of code to enable logging on the server. But I thing execution is not to join them and fail before that. No idea how to highlight the execution of any request. Maybe in jdeveloper and weblogic server?
System.setProperty ("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump", "true");
System.setProperty ("com.sun.xml.internal.ws.transport.http.client.HttpTransportPipe.dump", "true");
System.setProperty ("com.sun.xml.ws.transport.http.HttpAdapter.dump", "true");
System.setProperty ("com.sun.xml.internal.ws.transport.http.HttpAdapter.dump", "true");
System.setProperty ("javax.net.debug", "true");
Update 2: I just need to set the following properties of java (-Dcom.sun.xml.ws.transport.http.HttpAdapter.dump = true) in the setDomainEnv this file for the side server, see this link: How to apply Log and response with Java JAX - WS Client and web service server? But how to connect their good in files not just their output in the console?
I am in a position to know what is the cause of the error (Illegal treatment target instruction ("xml"), xml (not case sensitive) is booked by the plug.)
Update 2 in the question, I am able to see which is reached from the server console. The customer was sending additional labels and with in the body tag, which is not recognized by the server of web service application and it throw the customer 500 internal server error. The problem is solved by sending exactly the XML except without additional or missing tags.
-
WebLogic crash after error 'illegal memory access.
Hi all. WebLogic application crashed after receiving an illegal memory access error. any thoughts...
Error message: illegal memory access. [54]
Signal information: si_signo = 11, si_code = 2 si_addr = 0xb5778850
Version: BEA JRockit (R) R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-l
Linux-ia32
The Weblogic administration Console does not start since the accident of Jrockit. I have attached the startup log failed.
< 8 January 2009 11:13:22 AM MDT > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: java.la
NG. ClassFormatError: com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
java.lang.ClassFormatError: com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
Journal of weblogic admin stdout:
Java home = / ps_opt/wl92/jrockit_150_12
Ligne de commande java = java - jrockit-Xms256m-Xmx256m-Dweblogic.Chunksize=65536-Djava.util.logging.config.file=/ps_opt/wl92/webserv/myserver/applications/peoplesoft/logging.properties-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Dweblogic.Name=WebLogicAdmin-Dps_vault = / ps_opt/wl92/webserv/monserveur/psvault-Djavax.net.ssl.trustStore=/ps_opt/wl92/webserv/myserver/keystore/pskey-Dweblogic.ProductionModeEnabled=true-Djava.security.policy=/ps_opt/wl92/weblogic92/server/lib/weblogic.policy-Dssl.debug=false-Dps_home = / ps_opt/wl92 weblogic. Server
Options Java jrockit =-Xms256m-Xmx256m - Dweblogic.Chunksize = 65536
< 8 January 2009 11:13:20 AM MDT > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:
/ps_opt/wl92/weblogic92/platform/lib/p13n/p13n-schemas.jar:/ps_opt/wl92/weblogic92/platform/lib/p13n/p13n_common.jar:/ps_opt/wl92/weblogic92/platform/lib/p13n/p13n_system.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/netuix_common.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/netuix_schemas.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/netuix_system.jar:/ps_opt/wl92/weblogic92/platform/lib/wlp/wsrp-common.jar:/ps_opt/wl92/webserv/myserver/lib/endorsed/xalan.jar:/ps_opt/wl92/webserv/myserver/lib/pluto-1.0.1.jar:/ps_opt/wl92/webserv/ MyServer/lib/portlet-API-1.0.jar:/ps_opt/wl92/webserv/MyServer/lib/ps_patch.jar >
< 8 January 2009 11:13:21 AM MDT > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with BEA JRockit (R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-linux-ia32 of BEA Systems, Inc. >
< 8 January 2009 11:13:22 AM MDT > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: java.lang.ClassFormatError:
com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
java.lang.ClassFormatError: com/bea/xbean/store/Xobj$ DocumentXobj: invalid LineNumberTable 27684 pc
at java.lang.ClassLoader.defineClass1 (Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:56)
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.defineClass1 (Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:56)
in java.net.URLClassLoader$ 1.run(URLClassLoader.java:195)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
to com.bea.xbean.store.Cur$ Locations. < clinit > (Cur.java:482)
to com.bea.xbean.store.Locale. < init > (local .java: 168)
at com.bea.xbean.store.Locale.getLocale(Locale.java:235)
>
< 8 January 2009 11:13:22 AM MDT > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >
< 8 January 2009 11:13:22 AM MDT > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >
< 8 January 2009 11:13:22 AM MDT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >Hi Nicolas.
Is this patch for Weblogic 9.2? 92MP3 no patches
Is what version of Peopletools? 849.09
What OS? Linux 2.6.9 - 67.0.20.ELsmp
He broke down at the start? Yes, it will fail when trying to start the administration serverLet me know thanks
-
Constant crash with statement until I can notice that it is illegal
I recently restored Vista Home premium instead as it was breaking. So I installed 86 updates. My pc always freezes when the Explorer is open and playing downloaded games. I don't have the ability to write down the error message before the crash.
If this is due to a change in the system configuration, it was not intentional. Any suggestions what can be the cause and how can I fix it. I tried to find the source of the error, but it does not appear to be connected. I tried to limit the start up programs. I only know the basics and am not an expert. It leads me to madness. Thank you, JacquelineCheck if the same problem occurs when you run properly 'kicked' system (check here).
-
Remember - this is a public forum if you ever post any private information such as numbers of ophone E-mail!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
In Vista, you can just type it into the search line, you get when you click Start, and then simply press
to load any command that you enter. Alternatively, you can press the Windows key + r to get the run dialogue box and it do. If you want to have "executed" added to the start menu (not really necessary because the search line can perform the same function), right click on the taskbar, click Properties. On the start menu tab, click Customize, scroll through the list and select the box "run command". Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Maybe you are looking for
-
Value of ui.textSelectForeground is set to zero whenever Firefox is closed
I changed the value of ui.textSelectForeground in subject: config page at #ececec. But every time I close Firefox and open it again, the value of the option changes to #000000 - black. How can I keep my permanent options?
-
2130 DeskJet printer: printer DeskJet 2130
Pouvez printer DeskJet 2130 scan multiple pages into a single PDF file?
-
X 240 broadband does not not on Mint
So, I bought the laptop just for size and the Mobile service to wide band. Don't have windows, so I installed Linux. (Mint) It recognizes the SIM as it asks for the pin code. When I fill that in, I try and make a new connection, but it then says fail
-
creating applications with control of movement
I created a program that uses the control of the movement and the digital I/o card PCI-7344 Motion Control.It works fine in the LabVIEW environment but do not know does not any action that uses the card of the motion. I'm not creating an installer fo
-
BlackBerry Smartphones Will never learn all this? Help with contacts &; ILA
Glad this forum is here and many users savy! Help! I have all my contacts transferred over other phones. I went through and cleaned and updated for each contact. She is now my problem or screwup. You can use one or more of the phone numbers for a con