PC freezes with answers do not message

Similar Questions

• Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message

  Windows Live Mail freezes and goes to not responding not to when you try to print an e-mail message. I t comes up with unicode UTF-8

  It print a page of test very well and also printed from Notepad and word fine

  Scott

  Hi Scott,.

  (1) if it works well before?

  (2) remember to make changes to the computer before this problem?

  (3) what is the complete error message you receive?

  Method1: The computer in the boot and a test to see if you can print

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can post your query on the Windows Live Forums for more expert help

  Windows Live Forum -http://windowslivehelp.com/

  Thanks and greetings

  Ajay K
  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

• Please help: System freezes with error message "generic host process for win32 services has encountered an error and needs to close."

  Please can anyone offer help - whenever I start my PC it freezes
  then displays an error message "generic host process for win32 services has.
  encountered an error and needs to close. »

  In this error message, I get more information:

  szAppName: svchost.exe szAppVer: 5.1.2600.2180 szModName: ntdll.dll
  szModVer: 5.1.2600.2180 offset: 000122ba

  more information:

  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\svchost.exe.mdmp
  C:\DOCUME~1\Joe\LOCALS~1\Temp\WERd9dd.dir00\appcompat.txt

  I tried a lot of things: update drivers, run Ccleaner to check the registry,.
  checked for malware, Virus, uninstall xp service pack 3... Is there
  anything else I can try?

  After I clicked through the error messages above appears the taskbar
  Crash, then reappears, but with graphic reduction (gray color)

  I checked "Event Viewer" in "control panel" from here I get
  the following error message:

  Failed application svchost.exe, version 5.1.2600.2180, failed module
  ntdll.dll, version 5.1.2600.2180, fault 0x000122ba address.

  0000: 41 70 70 6 c 69 63 61 74 Applicat
  0008: 69 6th 6f 20 46 61 69 6 c ion Fail
  0010: 75 72 65 20 20 73 76 63 ure svc
  0018: 68 6f 73 74 2nd 65 78 65 host.exe
  0020: 20 35 2 2 31 32 36 30 5.1.260
  0028: 30 2 32 31 38 30 20 69 0.2180 I
  0030: 6th 6f 20 74 64 6 c 6 c 2nd n ntdll.
  0038: 64 6 c 6 c 20 35 2e 31 2nd dll 5.1.
  0040: 32 36 30 30 2 32 31 38 2600.218
  0048: 30 20 61 74 6f 20 66 66 0-off
  0050: 73 65 74 20 30 30 30 31 the value 0001
  0058: 32 32 62 61 22ba

  also an another error at the time of the accident

  0000: 42 75 63 6 b 65 74 3 has 20 bucket:
  0008: 31 32 39 36 37 35 38 33 12967583
  0010: 36 0D 0 to 6...

  Fault 129675836 bucket.

  I am extremely grateful for any help, this problem is about to drive me
  crazy!

  I solved my problem...

  To temporarily disable closing kick, after that the warning popup will appear, I went the prompt commands and typed in 'shutdown-a' so I could help out.

  Then I went in under the Application Event Viewer and saw that some services weird I don't need anyway did not start because they had missing information/dll registry info.  It was originally the svchost.exe service to fail (and default recovery for this is to reboot)

  I stopped the weird service (in this case, it was Hello) because I didn't need anyway, and went into the properties of this service and past earlier in "Manual" "automatic".

  Good luck

• I can't use my cd/dvd drive. It will let me play cd, dvd or burn CDs. I am not tech savvy at all, so be as specific as possible with answers and use terms laymens.

  Error message reads as follows:

  A drive with a format not supported in drive E: when I try to play a dvd with power dvd.

  Windows Media Player says there is no disc in drive E, even if he doesn't.

  Hello Charitylmc,

  Thank you for your message.  You are not able to play any CD or DVD, or is this just happening with one?  If it's just one, it could be that the disc may be scratched or damaged.  So what happens with all DVDs, click HERE and then run the FixIt!.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• If my connection interrupted by the ISP, my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and he does not answer to disconnect click.

  If my ADSL connection disconnected by the provider of the connection on my computer freezes instead of disconnect!

  As the title suggests, if my connection interrupted by the ISP (for example: Internet service provider who use dynamic IP automatically disconnects after 24 hours permanent connection), my connection broadband (PPPoE) on my windows 7 freeze and it does not cut, and this isn't answer to disconnect click, even if I uninstall the Ethernet card, keep the connection.

  Everything else works fine, and the only way to connect to the Internet is to restart my pc.

  Also if the connection is disconnected due to a traction cable or ADSL Modem power connection broadband (PPPoE) on my PC disconnect normally without any problems and I can reconnect without any problem.
  any help with this.

  Hello

  PPPOE software th whole arrangement never worked well from the first day more than 10 years regardless of the operating system.

  So most serious DSL carriers actually give free Modem/Router so that authentication would be by the side of the router WAN.

  They give it for free for phone support for this problem cost them more than the $10 adds the router to the Modem

  For example, get a router, simple routers in the United States are sold for less than $15.

  Router solved the problem PPPOE provides, security with NAT firewall, and stream DSL is actually faster than with authentication of software.

• Message JOB may NOT OPERATE because of DESTINATION INVALID keeps popping up online with IE or not.

  Periodically throughout the time I use the computer, the message of EMPLOYMENT cannot NOT OPERATE due to INVALID DESTINATION continues to appear and must be x'ed out before I can go on my work.  It comes as well when I'm online (IE9) and work on the DESKTOP.  This message has not arrived until I changed to IE 10.  I paid Microsoft to stop the problem I had with IE 10 and they put me in IE9, but this message now.  can someone help me?  I've already spent $250 for the military in order to fix this situation, but it has not yet been set

  I am running windows 7, IE 9, connecting cable through Brighthouse and MSN as your browser.

  Nothing new has been installed after the installation of IE 10 attempt and after that, when it does not work well, try to install Chrome.  This installation was stopped because the computer would not accept the download - for some reason any. I have a HP computer that has about 3 years and with the exception of this persistent situation works well.

  Hi Harry,.

  Let us work together to solve this problem.

  I ask you to answer a few questions, so that we can diagnose this problem properly:

  1. do you have connected an external hard drive to the computer?

  2 you have any backup software installed on the computer?

  This problem is known to occur if the external hard drive is not connected properly or if the backup software does not work properly.

  Please get back to us with answers. Your request is important to us.

• My iPhone freeze with grey screen, then restart only. Subsequently, the Wifi is not available, I have to finish manually restart.

  My iPhone freeze with grey screen, then restart only. Subsequently the Wifi is not available, I have to finish manually restart to be able to use the Wifi. I have restart my internet and network settings, but the problem is still there.

  Hi there Turco911,

  Looks like your screen goes gray and then shuts down its own, and you must manually restart to get the wifi to work again. I save your device in iTunes, then restore it like new and verify that it works.
  
  How to clear your iOS device and then set up as a new device or restore from backups

  If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.

  If when restored like new the problem persists, I would ask for your phone service:

  Repair - iPhone Apple Support

  Thank you for using communities of Apple Support, all the best!

• When I try to take a video with my webcam a message "locked by another application." I do not know and can not find which app has locked.

  When I try to take a video with my webcam a message "locked by another application." I do not know and can not find which app has locked. I can't find anywhere, do anything to solve this problem.

  Hello

  1. which version of the operating system you are using on the computer?
  2. What is the brand and model of the web cam?
  3. don't you make changes on the computer before the show?
  4. is it a built-in or external webcam?

  
  Method 1:
  You can perform a clean boot and check if it helps:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  You can also uninstall all software associated with webcam like yahoo messenger or anything else.
  Then install a unique program for the web camera and check if it works.
  
  Method 3:
  You can also update the latest drivers for the web cam on the manufacturer's Web site and check.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  After you have installed microsoft lifecam HD - 6000 PC with OS Windows XP3, message as "lifecam could not save you photo, audio or video clips" s ' Please help

  Prasanna Kumar Mishra

  Hi Prasanna Kumar Mishra,

  You did it happen any changes made to the computer before the show?

  You can try the steps from the following links and see if that helps:

  Troubleshoot failures to find the new LifeCam hardware
  http://support.Microsoft.com/kb/929087

  The problems of compatibility between LifeCam and other programs
  http://support.Microsoft.com/kb/953692

• my laptop with 7, the other with vista does not, windows message told to go update that does not exist on the start menu. I'm locked out using my computers

  my laptop, 1 vote against and 7, the other with vista will not work.  I use norton 360.  message at startup said to go to microsoft update on the start menu.  There is no windows update in the start menu.  I'm locked out using my laptop.  Help, please

  For Vista, see http://windows.microsoft.com/en-us/windows-vista/How-can-I-tell-if-my-computer-is-up-to-date and http://windows.microsoft.com/en-us/windows-vista/Updating-your-computer

  For Win7, see http://windows.microsoft.com/en-us/windows7/How-can-I-tell-if-my-computer-is-up-to-date and http://windows.microsoft.com/en-us/windows7/Updating-your-computer

• a yellow triangle with a critical problem message, windows vista does not load on a computer laptop dell studio

  Vista Windows failed to load on a dell studio laptop, the message appears with the critical error message, but then the screen turns white after auto restart, no loading of windows. What can I do

  http://support.Dell.com/support/eDOCS/systems/WS340/en/UG/DIAGS.htm

  Try the above balance sheet of Dell Diagnostics, using F12 to start this process.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Dell recovery options:

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  Above is Dell to reinstall Vista from the DVD on your computer.

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

  And that way if you have a recovery partition on your hard drive.

  See you soon

  Mick Murphy - Microsoft partner

• My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

  My V715W was not printing black print cartridge replaced with cartridge Dell, error message says lack of empty, re-installed ink cartridge the cartridge with the same message. Put original cartridge is black and got the same error

  My dells V515w printer will not print after that I changed the cartridge, the cartridges black & color dells. There is no print blank paper. Re-installed I'm really lost.

• Could not find the feature with Id: blackberry.invoke.message arguments

  Hi, I am using the message application, while the building, I have an error to BB 10 WebWorks SDK

  failed to find the feature with Id : blackberry.invoke.message arguments
  

  This is supported in this beta version of the SDK, simiarly there are also some features that are not available with this beta SDK release. Where can I find abt it.

  Concerning

  Rakesh Shankar.P

  The blackberry.invoke.messages API is not currently supported in the BB10 WebWorks SDK BETA.

  At the time of writing, the following APIs are currently supported in the BETA release:

  • BlackBerry.Connection
  • BlackBerry.Event
  • BlackBerry.Identity
  • BlackBerry.Invoke
  • BlackBerry.app
  • BlackBerry.System
  • BlackBerry.UI.Dialog

  For the complete list and to update the supported APIs, see the WebWorks API reference guide

  https://developer.BlackBerry.com/HTML5/APIs/

• Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly.

  Hello world

  Premiere Pro sart to load and stop directly with a windows error message. The program is not responding properly. (or something like that... I work in German...)

  I just bought all Deinstalled CC all and installed again and again.

  The problem persists... just with premiere pro cc 2015.2... I'm working on windows 7.

  You have an idea?

  Thank you very much

  François

  You can please go through the requirements for Premiere pro - Premiere Pro system requirements for Mac OS and Windows

• LR 5, no CC, with Nikon D800, trying to tie with MacBook Pro laptop; message from non-recognition of camera. Tried to download the latest updates of LR. It runs on desktop PC but not MacBook .your help please.

  LR 5, no CC, with Nikon D800, trying to tie with MacBook Pro laptop; message from non-recognition of camera. Tried to download the latest updates of LR. It runs on desktop PC but not MacBook .your help please.

  What version of OS are you using? If you run El Capitan, he won't work except in the latest LR6 and CC. Libraries attach Nikon used until 2015.3 or 6.3 LR LR 5 and LR CC are incompatible with El capitan. Nikon has recently updated libraries and those that are now used in the latest versions of LR.