PC HP 280 G1: REF L3E88ES: driver missing for: "Pci simple communications controller" on windows 7-64 bit french

Hello

I installed Win 7 64 bit on my new computer HP 280 G1, but it doesn't find Pci simple communication controller drivers.

It's the hardware ID:

PCI\VEN_8086 & DEV_8C3A & SUBSYS_2B34103C & REV_04
PCI\VEN_8086 & DEV_8C3A & SUBSYS_2B34103C
PCI\VEN_8086 & DEV_8C3A & CC_078000
PCI\VEN_8086 & DEV_8C3A & CC_0780

could you help me find this driver.

Thank you

Hello:

You need this driver...

This package contains the Intel Management Engine Interface driver for support of office models that are running a supported operating system.

FTP://ftp.HP.com/pub/SoftPaq/sp68001-68500/sp68479.exe

Tags: Notebooks

Similar Questions

  • Driver missing for PCI Simple Communications Controller for U41

    I have a problem with a driver for PCI Simple Communications Controller for U41. Please help for the best solution thanks

    Good day and welcome to the community.

    This is usually resolved by installing the Intel Management Engine Interface package.

    Please take a look at the pages of resources of your machine, under the section of Chipset :

    http://support.Lenovo.com/us/en/products/laptops-and-netbooks/u-series/U41-70

    I don't know if there are also the Serial i/o package.

    I hope this helps a little.

    Kind regards.

  • Driver missing for PCI Simple Communications Controller

    Hi, when you click on to my PC Device Manager, it shows a yellow exclamation mark under the heading modems and next to the controller PCI of communication Simple. It is said that the devices for this driver are not installed, does anyone know where I can find a driver for this? The ID details show the following:

    PCI\VEN_14F1 & DEV_2702 & SUBSYS_8D891043 & REV_01\4 & 1C660DD6 & 0 & 10F0

    I'm looking to change my operating system from Windows XP to Windows 7, I feel that I should have all my drivers in place before installing Win 7. I have a Dell Dimension 8300 PC.

    Any thoughts would be much appreciated

    There is no upgrade XP to Win 7. You will have to wipe the hard drive and do a clean install. If all the drivers that are installed will now be lost. All your personal files are lost too if you must go back and placed on external media first and be sure to have your software product key and software installation media (for example, MS Office), because you will have to reinstall everything

    Dell does not support Win 7 on the Dimension 8300. If you run the free Windows 7 Upgrade Advisor to see if your system is capable of managing in Win 7 and what drivers and software can be a problem. You can watch the video here to get advice from Microsoft by moving from XP to Windows 7.

    And to answer your specific questions, this driver can be installed when you install the chipset after loading Windows 7, or it could be the modem driver Conexant (dial-up). So if you use an Ethernet port to connect to the internet, it can even no need to install drivers for the modem.

  • Driver for PCI simple communication controller

    Dear Sir

    Since the time I loaded win 7, (I have win 7 Professional, completely up to date, core 2 quad 2.40 GHz, 4 GB of RAM, 3 internal HDD seagate 1 TB at 7200 RPM, nvidia GE Force each 512 MB VRAM) I found that the driver PCI simple communication controller is missing and it shows an excalmation mark. My system works fine, I have no problems with my system, but I was wondering what is this to. I tried to find the driver on the net, but I was not able to find it. Anyone of you could help me on what it is, and how do I remove the exclamation point in Device Manager. Just concerned.
    Concerning

    I am an ICU consultant, doctor Dr. Alok Modi MD

    You must have a compatible analog modem installed on your computer... not a problem if you don't fax or connect to a line of appeal... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

  • HP laptop 15-r006tu. Driver for PCI Ralink Bluetooth controller. Windows 7 (64-bit)

    Could someone help me to find drivers for these devices:

    device: PCI SIMPLE COMMUNICATIONS CONTROLLER
    hardware ID:

    PCI\VEN_8086 & DEV_9C3A & SUBSYS_2211103C & REV_04
    PCI\VEN_8086 & DEV_9C3A & SUBSYS_2211103C
    PCI\VEN_8086 & DEV_9C3A & CC_078000
    PCI\VEN_8086 & DEV_9C3A & CC_0780

    device: RALINK_RT3290_BLUETOOTH_01

    hardware ID:

    USB\VID_148F & PID_3298 & REV_0000
    USB\VID_148F & PID_3298

    Operating system: Windows 7 (64-bit)

    Product name: HP PC laptop 15-r006tu.

    You are the very welcome.

    The driver that I posted must have worked...

    Here is the list of ID's hardware supported by the driver as shown in the file of configuration HECI... information it is present for 32 and 64-bit operating systems.

    [SourceDisksFiles.x86]
    TeeDriver.sys=1,.\x86
    HECI.sys=1,.\x86
    wdfcoinstaller01011.dll=1,.\x86
    1 3f3ca95b-3978-4168-b47b-5444f42d6c89.devicemetadata-ms=, A package of metadata for EN - Win8 file
    1 46a6fdbe-c823-4579-bab6-35f67e01f793.devicemetadata-ms=, A package of metadata for EN - Win7 file

    [SourceDisksFiles.amd64]
    TeeDriverx64.sys=1,.\x64
    HECIx64.sys=1,.\x64
    wdfcoinstaller01011.dll=1,.\x64
    1 3f3ca95b-3978-4168-b47b-5444f42d6c89.devicemetadata-ms=, A package of metadata for EN - Win8 file
    1 46a6fdbe-c823-4579-bab6-35f67e01f793.devicemetadata-ms=, A package of metadata for EN - Win7 file

    ; - Manufacturer and models Sections.

    [Manufacturer]
    % MfgName % = Intel, NTx86.6.1, NTamd64.6.1, NTx86.5.1, NTamd64.5.1

    [Intel.NTx86.6.1]
    ; DisplayName Section DeviceId
    % TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1E3A
    % TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1CBA
    % TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1C3A
    % TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1DBA
    % TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_1D3A
    % TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_8C3A
    % TEE_DeviceDesc % = TEE_DDI, PCI VEN_8086 & DEV_9C3A

    [Intel.ntamd64.6.1]
    ; DisplayName Section DeviceId
    % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1E3A
    % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1CBA
    % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1C3A
    % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1DBA
    % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_1D3A
    % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_8C3A
    % TEE_DeviceDesc % = TEE_DDI_x64, PCI VEN_8086 & DEV_9C3A

    Try to manually install the driver as follows.

    Run the driver again if you deleted the file since the swsetup folder.

    Go to Device Manager and click on the controller Comms Simple PCI who need a driver.

    Click the driver tab.  Click on set to update driver.  Select travel it my computer for software driver and find the folder of the driver that was created when you ran the file.

    This file will be located in C:\SWSetup\sp63510.

    Make sure that the include subfolders is selected and see if the pilot goes like this.

  • Driver error issues "PCI Simple Communications controller has not a driver"

    I am trying to connect my printer, an hp deskjet 2050 printer, but I get the message that PCI Simple Communications controller does not have a driver and PCI Serial Port doesn't have a driver... what should I do?

    William

    Go to HP and download the driver, then install it.

    Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  • Missing drivers for PCI Simple Communications Controller

    Hello I need help to find the suitable driver for my PCI of Simple Communications controller

    Compatible IDs:

    PCI\VEN_8086&DEV_8C3A&REV_04
    PCI\VEN_8086&DEV_8C3A
    PCI\VEN_8086&CC_078000
    PCI\VEN_8086&CC_0780
    PCI\VEN_8086
    PCI\CC_078000
    PCI\CC_0780
    

    Thank you

    The Intel management Enging Interface following IMEI) driver for Windows 8.1 should deal with the issue.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-124060-1&cc=us&DLC=en&LC=en&OS=4158&product=5393267&sw_lang=

  • ProBook 470, windows 8.1 - missing driver for: PCI simple communication controller

    Hello

    I installed on my new laptop windows 8.1. from the Device Manager, it shows that miss me the PCI controller driver simple communications. What does this product do? and how do I install the driver for it? could not find any solution yet.

    Hello:

    Go to the page of the driver and support for your laptop and install the Intel Management Engine Interface driver, which is listed under the section Chipset.

    Since you did not specify if you had a 470 G0 or G1, which is the best I can do without knowing this info.

    The version of the driver IMEI is different for each model Gx 470.

  • Driver for PCI Simple Communications Controller for 32 bit Gateway MX 3210

    I installed a new hard drive in a gateway MX 3210, 32-bit and installed Windows 7. Device Manager shows missing me the driver for the controller PCI of communication Simple, so first I went to support Gateway with no luck, then tried several other sites, with no luck. Can someone help me find this driver?

    I'm glad that you solved.

    Happy new year!!!

  • I can't find the driver for PCI Simple Communication Controller for my laptop.

    Hi, I just got a HP Probook s 4540, produces none. H5J75EA #ABB and I do not know what driver to install for the controller PCI of Communication Simple, actually I can't. Could you help me please?

    Hello

    You are welcome

    You must download and install driver Intel management engine Interface from the corresponding link below.

    The IMEI - for Windows driver 7/8

    The IMEI - for Windows XP driver

    Kind regards

    DP - K

  • HP Compaq dx2300 format microtour missing PCI Simple Communications Controller Driver (Modem?). WinXP

    Hello

    I had to restore a HP Compaq dx2300 format microtour Win XP system from the recovery partition.

    Everything seemed to work fine except no driver found for PCI Simple communication controller.

    There was no modem in Device Manager.

    I downloaded the driver for the modem on the HP website, but it will not identify / install the driver.

    Remains of the error. (no driver found for PCI Simple communication controller.)

    Any Suggestions?

    Thanks in advance.

    My apologies to Paul.

    Your label says HP Expert 2014. I made a mistaken assumption that you were part of HP.

    I agree that it probably isn't a standard part of HP. I also looked at their specs and the database driver.
    I tried to use never version on the HP web site for their standard model for Agere 56 K PCI Modem driver. He did not consider it as one appropriate driver.

    However, I could only identify a compatible driver using a new pilot identifier utility (new to me at least).

    It seems to work.

    I think I'll keep it in my toolbox in the future.

    http://www.driveridentifier.com/

    My apolgoies once again and thank you for your efforts.

  • HP g42 230 br: network controller & pci simple communications controller driver missing

    Hello. I need help.

    My laptop HP G42 230 BR simply stopped access to the internet and I noticed in Device Manager that the controller network & pci simple communication controller drivers are missing. I tried to install a few drivers I found online, but without success. I formatted and reinstalled windows 7 and still the same.

    Please, how can I solve this problem? Any help would be really appreciated!

    Thak you.

    Hello:

    You need this driver for the controller of communication simple pci:

    This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

    File name: sp52353.exe

    You need this driver for network controller, according to the list of parts for your PC.

    This package contains the installation package driver for the controller LAN Realtek RTL8191SE wireless in the notebook models and operating systems.

    File name: sp47860.exe

  • Controller network & pci simple communications controller driver missing

    Hello

    I just reinstalled my HP g42 360 TX laptop.

    Operating system: windows 7

    driver network controller and PCI simple communications controller driver are not installed and the wifi does not work

    Here the hardware ID

    network controller:

     

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    PCI simple communication controller:

     

    PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C & REV_06
    PCI\VEN_8086 & DEV_3B64 & SUBSYS_1426103C
    PCI\VEN_8086 & DEV_3B64 & CC_078000
    PCI\VEN_8086 & DEV_3B64 & CC_0780

    and I want to know why my laptop cannot connect to the internet via a wifi connection?

     

    Hello

    Please try:

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_145C103C & REV_01
    Broadcom Wireless LAN Driver for Microsoft Windows 7:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-81598-1&LC=en&DLC=en&cc=us&product=4230610&sw_lang=&OS=4063

    PCI\VEN_8086 & DEV_3B64 & SUBSYS_1488103C & REV_06
    Intel Management Engine Interface (MEI) driver:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79549-1&LC=en&DLC=en&cc=us

    Kind regards.

  • HP compaq t4400: PCI simple Communications Controller Driver XP

    My PCI simple Communications Controller Driver XP is missing... where and how download? someone? Please

    This is my id hardware PCI simple Communications Controller Driver XP:

    PCI\VEN_104C & DEV_803D & SUBSYS_30B1103C & REV_00
    PCI\VEN_104C & DEV_803D & SUBSYS_30B1103C
    PCI\VEN_104C & DEV_803D & CC_078000
    PCI\VEN_104C & DEV_803D & CC_0780

    @strike88

    Try this one.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1849072 & swItemId = ob_70996_1 & swEnvOid = 1059

    REO

  • PCI simple communications controller driver hp dc5800

    error message:

    PCi simple communication controller

    The drivers for this device are not installed. (Code 28)

    There is no driver selected for the item or a set of device information.

    found the answer:

    You need to install the HECI of 32-bit driver that is not listed in the W7 to your PC download page.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12...

    But the link does not work

    Not the product you are looking for? If you can't find your product on this site, go to theCentre de Support HP - Hewlett Packard Enterprise .

    Hi, @gm114 :

    You need this driver, like the one you need for your specific model is missing from the support dc5800 page.

    https://Downloadcenter.Intel.com/download/19697/Intel-me-management-engine-driver-for-Intel-3-series-chipset-based-desktop-boards

    HP has some major problems with the support pages they know but are moving at a snail pace to fix.

    In fact, a snail is faster, because from what I've observed, they have done nothing to solve the problem up to now, after more than a month.

Maybe you are looking for

  • Satellite A500 - HARD drive will not show up in BIOS

    Hello My A500 worked very well the last few days and now it has just stopped so I tried to reinstall windows, and it says something about not being HARD drive not in the BIOS so I checked the BIOS and its not there, but in the windows 7 install disk

  • Cannot get wireless to work on my Equium A200-IVO

    Morning New on board and need help because I'm not technicla of mind My satellite crashed last week and in my infinite wisdom I had no backup back I reformatted the disk with Windows XP (do not have a Vista disc) I can't connect to the internet as th

  • Why my device not showing upward?

    Hello I'm new to fieldbus and could use help getting started. I can't see my device in the NI Configurator software. I running Communications Manager, and it seems that I can see my NI USB-8486 card, but I do not see the device across the adapter. I

  • E4200: Guest access: no IP address on the routers of the waterfall

    configuration: 2 wireless routers E4200. LAN - LAN connected to a cable. Router 1 is connected to the internet and has active DHCP. Router 2 is NOT connected to the internet and has disabled DHCP. Wireless is enabled on both of them with the same SSI

  • How to combine 2 photos 1 photography

    How to combine 2 photography int photographs 1 I want to sell stamps on e - bay. How to buy both sides of the stamp in an image