Similar Questions

• Guest VM Mac - IP address and the file copy host

  Hi all

  I'm involved with the automatic configuration of the guest virtual machines in Mac. In this context, I want to start and stop the virtual machine automatically. Also, I want to copy files between the host and the guest and launch programs automatically in the comments.

  -

  ---

  System details:

  VMware Fusion: Version 3.1.1 (282344)

  Host of Office Mac: OS X 10.5.8

  Comments to VMware Mac: OS X 10.6.2 Server 64-bit

  VMware Tools installed

  -

  ---

  1. I am able to use the vmrun as 'start', 'stop' commands, etc. But I'm unable to use the controls of the operating system called as 'runProgramInGuest' and 'copyFileFromHostToGuest '. I understand an exhaustive search, Mac Guest VM does support all the vmrun commands. Please specify if this isn't the case.

  2. because the vmrun commands do not work, and I always want to copy files to the guest, I try to get the IP of the host Mac address to connect to the FTP host - essentially treat them as 2 different machines on the network. Please specify whether it is possible to get the IP address of the Mac Guest VM and copy the files in the manner described.

  Thanks in advance,

  Hema

  Hi Hema,

  Welcome to the forums.

  I have no experience with the Fusion, but I had to work on the same problem with VMware Player. If your guest is using NAT network connection, you should be able to find its dynamic IP address in the DHCP leases file placed at:

  -/var/db/VMware/vmnet-dhcpd-vmnet8.leases

  As long as you know its mac address, you should find its IP address.

  It may be useful

  Concerning

  Franck

• Collage error: runtime error. Error: access violation, address of the error: 0000 P 280, the Module name: GFSData.DLL

  Hello to all on the forum,

  I am running DIAdem 2015 (15.0.0f6005) on a Windows 7 Pro SP1 i3 4 GB RAM machine.

  I want to evaluate a test. Data are expressed as 25 .txt files. I need to plot, one of the values on the whole test time. I tried to combine the data from all 25 in one file .tdm .txt files. I came far enough until I met my problem. After gathering around 15 .txt files in a .tdm, tiara doesn't let me continue. It gives this error message (in German, I'll translate as good as possible):

  "When executing command 'DataBlClpPaste('1-52',1859122,0)' a rumtime error has occurred.

  Error: ACCESS VIOLATION

  Address of the error: 0000 P 280

  "Name of the module: FGSData.DLL.

  I will describe my procedure in which this happened:

  -Open the .txt with plugin I had created the first import

  -Ribbon with two windows view channel: have the target in a secondary window group, drag the newly imported from .txt in the other channels

  -In the secondary window with new data, select the lines I want to add to the data target group by clicking on the first line, then scroll to the last row and shift-select that. CTRL + c to copy the data

  -In the target group, click the first empty line, and then ctrl + v to paste data here

  After the last step, instead of pasting the new data in the target dataset, the above message error. I can't do anything, but click on 'ok '. After ok, the program window will not respond to any click except for switching between Navigator / View / analysis /... I have to close DIAdem, where I can always select "close and save", that works too.

  I could go a few times after reopening DIAdem, but finally, which stopped working. It now gives me the error message whenever I try to do this routine. The .tdm file is 21Mo now, the .tdx is 1.1 GB.

  I appreciate any help on this, I really would prefer combining data using DIAdem on trying to copy and paste around 1 GB of data .txt into one giant .txt file. It takes very long to not even open a .txt of 50 MB file, I fear this would be a messy process.

  Best regards

  Simon

  If you are using DIAdem 2015, there is a new entry in context menu where you can select Add.

  Maybe it helps.

  The help of DIAdem 2015:

  Adding data

  
  

  Adding data to merge similar series ratings data in order to deal with them. In the process, DIAdem adds the data to load for existing channels with the same name in the data portal instead of storing data in new channels. Perform the following steps to add the external data area data channels in the data portal:

  1. Open the NAVIGATOR tiara.

  
  

  2. Select remove internal data to delete the data in the data portal.

  
  

  3. Find the Demo1.tdm file in the file browser.

  
  

  4. Drag and drop the file in the data portal.

  
  

  5. Select the Demo2.tdm file in the file browser.

  
  

  6. Open the context menu of the file and select Add data.

  
  

  Tiara adds the data in channels that have the same name in the data portal. In the properties of the Data Portal window, you can see that the number of values in the channels has doubled.

• WLAN Access Denied for active MAC address in the ACL

  I have a pretty great list ACL (Access Control) and I've never had a problem with it in the past, but I just got a new laptop and same computer when I save the MAC address and reboot the router I always get the "WLAN Access Denied" error for access from your laptop.

  I did all the "sanity checks" to ensure that the password is correct and that other devices still work.

  I had the MAC address of the laptop the same way, I always have, I see the MAC address in the Logs in the access denied message and copy it from there, in the access list. I did it with more than 20 other devices successfully, I'm not sure what is different about this one MAC address... I confirm through ipconfig on the laptop that the MAC address I use is correct.

  When I turn off ACL, I can connect without any problem of the laptop.

  Any thoughts? I am very familiar with computers and you can do an advanced troubleshooting, I do not know infrastructure and networks of the stuff so I don't know where to start here.

  Any ideas on how I can fix this would be appreciated!

  You may have hit a limit of the ACL. A test, remove a device from your list and see if your laptop will connect. This would confirm if you have contributed the most to list ACL on the router...

• How to access SPA3102 configure page if the gateway IP address is not visible?

  Hi, in the middle of my adapter troubleshooting, we lost the address to the configuration page (empty by default gateway shows).

  Here's what I see on my online status:

  Address type: automatic private address

  IP address: 169.254.150.92

  Subnet: 255.255.0.0

  Default gateway:

  any ideas how I can access the map settings to address this problem?

  Hello

  the automatic IP address is auto-assignée IP who thought the Windows o/s.

  So you must first of ALL try to 'fix' the adapter under windows while the SPA is connected, your computer is wired for plug LAN and SPA is started... If the adapter will get the IP address of the DHCP server, you have won.

  Second, if this does not help, you can use IVR of SPA to read the addrresses WAN and LAN IP and then you must configure your card of lan of computer to "similar" IP manually - for example if the LAN IP of the SPA must read 192.168.1.1, you should set your computer 192.168.1.2, netmask 255.255.255.0 IP and access the 192.168.1.1.

  Third, if even that are not present, you can IRV SPA - 3102 allows to perform the default adapter factory reset and then follow the manual on IP addresses and connections.

• Access point WAP54G whose MAC addresses are the same

  I have 3-point WAP54G access that are connected together using wireless bridge settings found under the "AP Mode" in the menu.

  I would add a fourth unit, but as I am doing so I discovered that the 4th unit network MAC address is the same as that of the three already existing in my lan bridge WAP54Gs.   How can this be?  All units, aren't supposed to have unique MAC address of the factory.  I have triple checked to make sure that I am indeed two different units WAP54G.  Yes there is indeed to disting WAP54G units in my possession to what appears to be duplicate MAC addresses.  Then two units with double MAC addresees exsist on the same bridge LAN?  If this is not the case, is it possible to change one of the units, itg is not possible to return a device?  Thanks in advance for your help in this matter.

  David Desesquelle

  Tech Mgr.  HE

  Capricorn productions

  New Orleans, Louisiana

  (Mod Note: deleted non-public information.) (Thank you.)

  What is the common MAC address?

  Concerning

  Fred

• New Win 7 computer cannot access the IP address of the network printer. Help, please.

  Greetings,

  -----------------------------------------------------------------------------------------------------------------------

  UPDATE: we have found the solution to this problem, we, and that I posted an explanation as well as two ways to solve the problem in my 2nd post on May 5, 2015. Scroll down to it for the solution. Unfortunately, Microsoft does not allow the OP to mark one of their own messages as 'the Answer' so this thread continues to be listed as "no answer" when he actually answered me.

  -----------------------------------------------------------------------------------------------------------------------

  The original message follows...

  We cannot sign a new Win 7 (64-bit) computer to a printer ethernet established in our local network of 'working '. We have reached the limit of our troubleshooting skills and expertise assistance.

  Our Local network
  ------------------------
  The printer is a Dell 5100cn workgroup laser that is connected via an ethernet cable to a 10/100 workgroup switch 5-port Cisco/Linksys. The switch is connected to the built-in cable Motorola modem / 4 port gigabit router / WiFi access point. There is no server between the printer and the network.

  Other computers on the network run also Win 7 and have no trouble seeing and using the printer. Some computers are connected via a gigabit ethernet cable to the router Motorola. Other computers connect wireless WiFi (once again, by the same Motorola device). All computers, including the new ones, are attributed to the same workgroup.

  The printer has a static IP address. It also has an integrated Web page accessible within the network via a browser to view the status of the printer. All previous computers can view the status of the printer Web page by entering its IP address in a browser.

  The new Win 7 computer
  --------------------------------
  At the Windows command prompt, we successfully ping the IP address of the printer and received a return signal. However, we are unable to connect to the IP address of the printer (and status Web page) with a browser. And we cannot find the printer when install us the printer driver. We have tried to turn off the Windows Firewall and it did not help.

  When we install the driver, move us as a 'local' printer and create a new "Standard TCP/IP Port" for her. We enter the static IP address of the printer and name the port. Define us the Protocol to "LPR", enter the name of the queue ("lp") and activate SNMP State with name of the 'public' community and the index "1". These settings have worked very well with our previous computers.

  When the time comes to 'choose printer', we select 'have disk... '. ' and use the Dell 64-bit for this printer driver. But it does not work and do not print a test page. We even tried to install the printer as a 'network' printer driver, but it does not, either. In addition, the 'local' method always seemed to work best in the past.

  The new computer has no harm to see other computers and devices on the network. For example, there is a NAS connected to the same switch Cisco/Linksys like the printer and the computer can access the NAS via its static IP address. The new computer can also access the internet. He can't use the IP address of the printer. We even tried to change the address IP of the printer, but that did not help either.

  Despite the fact that the work - the network troubleshooter Windows command prompt ping indicates that the printer is not responding. What do we lack? Help, please.

  Greetings,

  I hope that this will be our last post on this subject. We have discovered the source of the problem and can offer two 'fixed' in case someone else runs into the same situation.

  With the help of MSConfig and a process of elimination, we have disabled non-Microsoft services that were running on the computer until we discovered that "Qualcomm Atheros Killer Service V2" was the source of the problem.

  Explanation

  ----------------

  Our new Win 7 computer contains a communication module ethernet/WiFi/Bluetooth e2200 Qualcomm Atheros. The manufacturer provides a '' Killer Network Manager '' for this system. Its purpose is to monitor and control the flow of data over a network connection in order to optimize for. For example, the user can choose to give the program A high priority and program-B low priority. This ensures that the program-A is less lag in the network traffic.

  The primary market for this function, so far, has been the online game (where the name of 'Killer'). It allows players to channel the bulk of the bandwidth available to their game and away from other programs and services that are running at the same time. A response faster online gives the player the advantage it needs to get "kill him" before someone else.

  This system of control of bandwidth has interfered with data packets of return of our network, clearing communication between our computer and our printer printer.

  Difficulty 1

  --------------

  The simplest solution for us was to disable 'Qualcomm Atheros bandwidth control' for the ethernet NIC that has been accomplished by going to: Windows Control Panel > network and Internet > Network and Sharing Center > change the settings of the card (in the sidebar). Then we clicked on our connection to the LAN (our NETWORK ethernet card) and select the 'Properties' command Finally, on the Networking tab, we have disabled 'Qualcomm Atheros control bandwidth' and clicked 'OK' button to close.

  All that was needed after that was a quick restart and we were able to access our printer even with the killer Network Manager and functioning of Qualcomm Atheros Killer Service V2.

  Either way, we left the control function of bandwidth enabled for wireless (our) network connection because we do not plan on using this network printer when the computer is untethered to ethernet.

  Difficulty 2

  --------------

  If you don't want the killer running Network Manager on your computer, you may be tempted to uninstall. Do not! Uninstall will also uninstall the drivers needed for your ethernet, WiFi and possibly your Bluetooth as well. We heard that some users have communicated with Qualcomm and were able to coax, on their part, the necessary drivers comm without luggage "Killer". But you don't need to do it, either.

  All you need to do is: (1) remove the 'Killer Network Manager' of the '"start up" folder of the start menu of Windows (under "programs") and (2) using MSConfig, uncheck "Qualcomm Atheros Killer Service V2" under the ' Services ' section. Then reboot and you're good to go. The killer Network Manager and his service will not work.

  Moreover, the reason for which we did not chose this method, ourselves, is because we see one deserves that available Killer Network Manager so that we can block network traffic to select programs. Solution 1 converts this easy thing because the Ethernet bandwidth control can be quickly activated again if she is ever desired. And we're leaving it enabled for our WiFi.

  Best regards, David-EH

• Cannot access memory at address 0 x 0 at start of thread for the connection to build...

  Here is my code,

  void AlertListPage::onOnCallClicked()
  {
      thread = new DownLoadThread();
      QThreadPool *pool = new QThreadPool();
      pool->start(thread,0);
  }
  

  class DownLoadThread: public QObject, public QRunnable {
      Q_OBJECT
  public:
      DownLoadThread();
      virtual ~DownLoadThread();
      virtual void run();
  ...
  ...
  }
  
  cpp...
  
  DownLoadThread::DownLoadThread() {
      // TODO Auto-generated constructor stub
  
  }
  
  DownLoadThread::~DownLoadThread() {
      // TODO Auto-generated destructor stub
      sta::out<<"test";
  }
  
  void DownLoadThread::run()
  {
  ...
  ...
  }
  

  I set the breakpoint at the line:

  pool->

  start at (wire, 0);

  and the first line within the Run() method.

  run once OOP-> start and before running, it rises can not access memory at address 0 x 0.

  I do not see where I put the object as null...

  Thank you.

  Do you need a thread pool and QRunnable? You can also use QThread-> http://qt-project.org/doc/qt-4.8/QThread.html

  You initialize QObject in constructor? It's not like so, cause your Builder does not need a QObject as a parent. Then maybe parent is set to NULL.

• Random crashes occurring error violation at address 000C66D8 in module of access "skype.exe. write to the address 03E00FF

  When you use the computer, web browsing and games. I get crashes.
  Sometimes, when I opened the games or even randomly. When they occur, a majority of my fall of programs with errors such as

  "access violation at address 000C66D8 in module"skype.exe". address 03E00FFF writing.
  and

  "The exception unknown software exception (0x0eedfade) occurred in the application at location 0x78e1c42d.

  When in a game or graphics program such as chrome or photoshop and this kind of incident occurs, many of the menus out bug and show the strange graphical glitches where strings of text and changes in size and orientation, it seems quite comical, and when the textures or boxes/interfaces extend into strange shapes or are carried over to other interfaces in the program. I had previous problems with graphics on flaws cards, having recently die completely with the stick of a RAM. Having replaced the two I didn't have these problems. Its strange how it happens out of the blue where the rest of the time all is well.

  Any suggestions?

  Hello Giles.

  Thanks for keeping us posted and provide us with a detailed description of the issue.

  I certainly understand the inconvenience caused to you. However, I appreciate really all your efforts towards the resolution of the problem.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Please follow the steps outlined in the article below and check if that helps.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter

  If the problem persists, please follow method 2.

  Method 2:

  Please follow the steps outlined in the article below and check if that helps.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• The VPN Clients cannot access any internal address

  Without a doubt need help from an expert on this one...

  Attempting to define a client access on an ASA 5520 VPN that was used only as a

  Firewall so far. The ASA has been recently updated to Version 7.2 (4).

  Problem: Once connected, VPN client cannot access anything whatsoever. Client VPN cannot

  ping any address on internal networks, or even the inside interface of the ASA.

  (I hope) Relevant details:

  (1) the tunnel seems to be upward. Customers are the authenticated by the SAA and

  are able to connect.

  (2) by many other related posts, I ran a ' sh crypto ipsec her "to see the output: it

  appears that the packets are décapsulés and decrypted, but NOT encapsulated or

  encrypted (see the output of "sh crypto ipsec his ' home).

  (3) by the other related posts, we've added commands associated with inversion of NAT (crypto

  ISAKMP nat-traversal 20

  crypto ISAKMP ipsec-over-port tcp 10000). These were in fact absent from our

  Configuration.

  (4) we tried encapsulation TCP and UDP encapsulation with experimental client

  profiles: same result in both cases.

  (5) if I (attempt) ping to an internal IP address of the connected customer, the

  real-time log entries ASA show the installation and dismantling of the ICMP requests to the

  the inner target customer.

  (6) the capture of packets to the internal address (one that we try to do a ping of the)

  VPN client) shows that the ICMP request has been received and answered. (See attachment

  shooting).

  (7) our goal is to create about 10 VPN client of different profiles, each with

  different combinations of access to the internal VLAN or DMZ VLAN. We do not have

  preferences for the type of encryption or method, as long as it is safe and it works: that

  said, do not hesitate to recommend a different approach altogether.

  We have tried everything we can think of, so any help or advice would be greatly

  Sanitized the ASA configuration is also attached.

  appreciated!

  Thank you!

  It should be the last step :)

  on 6509

  IP route 172.16.100.0 255.255.255.0 172.16.20.2

  and ASA

  no road inside 172.16.40.0 255.255.255.0 172.16.20.2

• violation to the 500B 6430 address in the access module "rtl150.bpl". Read address 00000004

  At the start, after entering my password, Windows 7 displays a window of Spybot-Search & Destroy2 plate with a

  message from:

  violation to the 500B 6430 address in the access module "rtl150.bpl". Read address 00000004

  Is there a solution to this problem?

  Thks and Rgds

  TS

  Try to uninstall Spybot and then reinstall the latest version and see if that fixes the problem.

  Just in case, it may make sense to run a full virus / malware scan as well.
  If you have access to another computer, you can download Windows Defender off line which you will scan in a secure environment and are more likely to remove the intrusive malware.
  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

• My Windows 7 PC does not access the internet and the IP Address of the local router

  My desktop PC gets internet access. She also cannot access my router (via IP address), although it shows a connection to the router in the network and sharing (correct network name) Center. The administration of the router shows in turn as connected desktop pc.

  I tried the following:
  -Restart the PC several times - no change
  -Reset my cable modem and router - no change
  -try to connect by using a wifi adapter - no connection
  -Try the windows network diagnostics - first "DNS server is not responding", now "broadband modem is known of connectivity issues.
  -use the same cable and port on the router with my laptop (also windows 7)-internet access works
  -internet access with my laptop via wifi - works
  -internet access with my mobile android (wifi) - works
  -check the settings of the router (my laptop has access) - everything is OK

  The problem must be in the system Windows 7 from my desktop PC.

  I hope you can help!

  P.S. I rebooted in "safe mode with network" and now got access to the internet. I just read about a problem with McAfee products and now running McAfee Virtual technician to see if it helps.

  P.P.S. McAfee virtual technician several questions and some of them, now, I have access to the internet (yay!), now upgrade from McAfee and hoping for the best.

  PPPS problem solved.
  Solution (was http://service.mcafee.com/FAQDocument.aspx?id=TS101446):
  -Restart the computer in safe mode with networking
  -go to mvt.mcafee.com and install McAfee Virtual Technician
  -run and repair
  -Restart
  -updating McAfee
  -run again the MVT (no problem found)

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• I just bought the DC Pro Acrobat full of desktop software only.  Have downloaded fine, but when I go to install the download, it is for me an "access violation at address 00000000. read of address 00000000 ". Can someone please?  Thank you!

  I just bought the DC Pro Acrobat full of desktop software only.  Have downloaded fine, but when I go to install the download, it is for me an "access violation at address 00000000. read of address 00000000 ". Can someone please?  Thank you!

  Hi Rob,

  What is happening in Mode safe? If you can install it in Mode safe mode then delete all entries in startup via msconfig as this could conflict with the program.

  If this does not work, saving all the data of your administrator account, you can delete the account and recreate it.

  Kind regards

  Rave

• How do I see the actual clients in Apache access.log ip address when front-end is a load balancer.

  Dear.

  I use ebs 12.1.3 and db 11.2.0.3 OS OUL5x64

  in one applTier, I could see the ip address of the clients when they connect to the system in the access_log but

  with the average level has 2 servers AP1/AP2 configure with a LoadBalancer in front.

  verifying the connection in the Apache log file (access_log.1410393600) we see that the balancer IP address of load.

  Please let know us if he died to set up so that I can see in file access_log which client (Ip address) connected to Server (AP1 or AP2)

  Thanks in advance.

  Concerning

  Please see (how to show the Client IP address in The Access Log when using A load balancer (Doc ID 1355549.1)).

  Thank you

  Hussein

• Determine the IP address of the host in the guest operating system

  In VMware Fusion 3.0, can I determine programmatically primary IP address of the host system of Windows running as a guest OS?  I see that the shared folders are mounted "host vmware", but this name seems to be only useful for mounting of volumes CIFS.

  -Curtis

  In VMware Fusion 3.0, can I determine programmatically primary IP address of the host system of Windows running as a guest OS?

  No, far from having the host it somewhere the guest knows put request (for example, create a text file in a shared folder). HGFS shared folders do not go on the network.

  If you are using NAT or the network invited only the default one host address predictable from the perspective of the guest, but this isn't the IP address that is visible from the outside.