PC is slow and get the message insufficient disk space
my PC is slow and I get a continious pop up indicating "you run low disk space on the local disk C:.
What should I do?
Do a house cleaning and the dust of this hard drive:
You can free up disk space (will also help get rid of the things that you do not use) through the following steps:
Windows XP should take between 5 and 10 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.
If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )
You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning
How to use disk cleanup
http://support.Microsoft.com/kb/310312
You can disable hibernation if it is enabled and you do not...
When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:
-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.
You can control the amount of space your system restore can use...
1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.
You can control the amount of space used may or may not temporary Internet files...
Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...
-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.
You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:
CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)
Other ways to free up space...
SequoiaView
http://www.win.Tue.nl/SequoiaView/
JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.html
Those who can help you discover visually where all space is used. Then, you can determine what to do.
After that - you want to check any physical errors and fix everything for efficient access"
CHKDSK
How to scan your disks for errors* will take time and a reboot.
Defragment
How to defragment your hard drives* will take time
Search for malware:
Download, install, execute, update and perform analyses complete system with the two following applications:
Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)
Search online with eSet Online Scanner.
The less you have to run all the time, most things you want to run will perform:
Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.
You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.
Cleaning the components of update on your Windows XP computer
While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.
Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)
Reset.
Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)
Reset.
and...
Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:
Close all Internet Explorer Windows and other applications.
AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.
(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...
Reset.
Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
How to reset the Windows Update components?
Reset.
Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:
Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.
If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.
Tags: Windows
Similar Questions
-
Get the Message "Check disk space on backup" Drive E is HPTools
space 4 reserved gigs - no place for backups of the system and you cannot click the system back ups box.
Computor > properties > System Protection, ensure E has protection
Not sure what you mean by '4 GB reserved space'
Theres no point to the unique backup installed drive or a partition on this disk. If the player falls down all will be lost
-
I am more able to sync my I phone on my Mac and get the message that my phone cannot be used because it requires a newer version of iTunes. He tells me to go to www.itunes.com to download the latest version of iTunes... I downloaded the latest version on my mac, but what I do on my phone? I used to be able to sync the two and now I can't even download the photos from my phone on my mac...
iOS9 on a mobile device requires iTunes 12.3 or higher, which in turn requires a computer running OSX 10.8.5 or higher. Update of the system only checks the updates for the current version of the system you run, but that itself can be updated. It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. If you can not run a newer system, you will not be able to sync this phone to your current computer. If she can run 10.8.5 or higher, you can either buy a download for Apple OSX 10.8 Mountain Lion code online, or you can try to install the free El Capitan OSX 10.11. El Capitan can run slower on older machines and require the additional purchase of RAM. Making a big jump in versions of system is also more likely to affect the old software.
At el capitan Snow Leopard, it will make my macbook is slow? - https://discussions.apple.com/thread/7412959
Mountain Lion 10.8 purchase link United States of America - http://www.apple.com/shop/product/D6377Z/A/os-x-mountain-lion
Mountain Lion 10.8 purchase link U.K. - http://www.apple.com/uk/shop/product/D6377ZM/A/os-x-mountain-lion
Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/
-
Original title: "Prop Res DLL not loaded".
Try printing the income tax from 2012 on a Lexmark X 1185 and get the message "Prop Res DLL not loaded" How can I load it? Typically get this message when I print review copy. My system is Windows XP.32 bits
Hi Robert,.
I would be grateful if you could answer the following questions:
1. did you of recent changes made to your computer?
2. which antivirus app do you use?
Here are a few troubleshooting steps that you can try to solve this problem.
Method 1: Let's uninstall and reinstall the Lexmark X 1185 printer drivers.
To uninstall the printer software, see the following link.
http://support.Microsoft.com/kb/307895
Restart the computer, visit the following link and install the printer drivers.
If the method above does not work, follow the steps in the next method.
Method 2: Error Message When you try to print or save a document in OneNote 2007 or in Word 2007: "Prop Res DLL not loading" or "Cannot load Library DLBAPRP.dll"
http://support.Microsoft.com/kb/918730
Note: suggested above steps are applied to your scenario as well.
If you have additional problems, please reply to this post and we will be happy to help you further.
-
Ligtroom 6 Better, I will describe my problem once right 1. always after 4 weeks, I get the message "trial version expired Ligtroom 6a 2. you will be asked to fill out my license number 3. After completing the restart and get the message "error 16". 4. all again manager install Adobe again and install this once again repeated problem Ligtroom each month can ensure that this stops my version is a purchased official version Now repeat the problem after only 4-5 days! Caveat! I'm not a computer specialist are not too complicated solution Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
-
try to download and install cs5 online and get the message "'Install.app' is corrupted and cannot be opened. You must eject the disk image. »
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
-
Try to install Windows 8.1 and get error message: boot disk cannot be partitioned
I am trying to reinstall Windows on my Mac 8.1 and get the message error "boot disk cannot be partitioned or restored to a single partition. I ran across the 'bugs' usual suggested, that I found online with no luck. Attached are the screenshots that can help.
How have you managed to get two HDs of recovery on the same disc? You have two versions of OS X installed on this drive in the past?
-
I can't open FF and get the message: error: one is not defined
FF does not, even if in safe mode. Under FF, I get an error with the message box ' error: one is not defined ' error info is
"Source File: http://www.google.com/extern_js/f/CgJlbhICdXMrMFo4ACwrMA44ACwrMBc4ACwrMDw4ACwrMFE4ACwrMFk4ACwrMAo4AEBdmgICcHMsKzAWOAAsKzAZOAAsKzAlOAAsKzAqOAAsKzArOAAsKzA1OAAsKzBAOAAsKzBBOAAsKzBNOAAsKzBOOAAsKzBTOAAsKzBUOAAsKzBfOAAsKzBjOAAsKzBpOAAsKzB0OAAsKzAdOAAsKzBcOAAsKzAYOAAsgAI8kAI2/BFKlF3L_Vtk.js
Line: 333 "
What is the solution?- "Clear the Cache": Firefox > Preferences > advanced > network > storage (Cache) offline: 'clear now '.
- 'Delete Cookies' sites causing problems: Firefox > Preferences > privacy > Cookies: "show the Cookies".
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).
- Makes no changes on the start safe mode window.
See:
-
Pandora has been helping troubleshoot me and just found out that I was able to register and get music with IE. Firefox is the cause of this Active the only plug-in is open H264 Video Codec provided by Cisco Systems Inc. 1.3
Plug-ins that are disabled: Adobe Acrobat 11.0.8.4, update of Google 1.3.26.9, Java (TM) Platform SE7 U55 10.55.2.14, Microsoft DRM 9.0.0.4503, 7.7.67.7.6.0 Quicktime, Shockwave, Flash 17.0.0.169, Shockwave for Windows Presentation Foundation 3.5.30729.4122, Windows Media Player Dynamic Link Library 3.0.2.629, 5.1.30514.0, Director 11.5.9.615 Silverlight.
Which of these do I have to make it activePandora requires the Shockwave Flash plugin and perhaps others, to be active. I would not disable all of these plugins that you disabled. Try to activate shockwave flash, then by restarting Firefox to see if that solves the problem. If it is not the case, try to activate the rest of your plugins.
-
Original title: Windows 7
I have 2 questions-
I have a laptop Windows 7 when I tried to update Windows 10 received a message that it could not be updated. Has there never been a solution or an update for those of us who have a version of Windows 7 which initially could not updated for Windows 10?
I have a computer I upgraded Windows 10 and really like it. I do not understand that I can not make a copy of 10 Windows on a computer, I've updated for Windows 10. Is it possible for me to download a copy of Windows 10 on my laptop Windows 7 to make a restore CD in the case of a computer problem?
You can try the upgrade manually:
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
- How to: determine if a device application or hardware is compatible with Windows 10
- Will remain the documents and applications, or install app must
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
You also have the possibility to choose 'Keep personal files only', which guarantees a successful in most cases installation.
-
Try to load a game and get the message that not taken OpenGL2.0 support.
What does that mean? What can I do? How to pass the game FAQ page recommends?
Angry birds?
How to check your video card for OpenGL 2.0 support
Go to the manufacturers site, area of support for your video card and download and update the drivers to the latest version. If you have difficulties to identify your video card, download GPU-Z and run it. It will tell you what you have.Thank you Google. :)
If you have difficulties to do the above, please provide the brand and model of your PC and/or the video card and GPU - Z results. I will direct you to the correct drivers.
-
I get a message low disk space hp tools (e)
Re: I get a message of low disk space hp tools (e).
OptionsI get a message to hp low disk tools (e) space for, but I only have 1 to the high registered point
things in my hp (e) tools
meadiaID.bin 1 KB
HPSF_Rep 1kb
HP_WSD 1kb
> Hewlett-Packard movie size
Size of movie BOSUpdate
BIOS unown size
Quickweb 2.189g
size of movie systemDiagsSize COMPAC unone
-------------------------------------------------------------------------------PC laptop COMPAC Presario CQ57-339WM
Windows 7
I am of this definition to a friend
HP tools partition is essentially for the backup BIOS and HP Diagnostics to the seed. However, I think that the user has installed Quickweb in that partition. If the system still works, I'd say you allocate 300 MB of drive C on the E drive that would solve this problem. The document from the following link can help:
-
Photosmart C7200 puts himself after power off the power. I get an error message and the lights flash. To clear, I have to disconnect.
I get various error messages-
'B8000080, B858BD82, B03Fcc84' I tried all suggestions from HP and nothing elimates the problem web page. In my view, that it is a common problem with the HP printer. I want to live with the problem until that matrices of the printer. I am very disappointed in the way that HP does not support to fix this and future purchases that I turn not to have bought HP products.
-
I bought 11 Acrobat Pro and get the message invalid S/N.
$450 and three weeks and I still can not install this or get anyone at Adobe on a phone to help him. Needless to say that Staples does not return for open-source software.
Hi Suzanne,.
I apologize for the inconvenience! What happens when you try to install Acrobat? You are using a MAC or Win?
Impatience back on your part.
Best regards, Stacy
-
Original title: I'm not able to open anything that uses Windows Explorer
I'm not able to open anything that uses Windows Explorer.
When I try to open: My Documents, Control Panel, any Office application, etc. - the window remains empty and said "Windows Explorer (not responding)." My desktop icons are filled and I am able to open the Task Manager.
Any help is greatly appreciated? Also, I'm not a technology person, so please be very percise.
Thanks in advance.
Thanks for the help.
I had installed the update of MS Windows Defender KB915597. After doing a restore to the point of restoration, taken at the time of the update, I am now able to open Windows Explorer.
Seems that something in this update does not work with my system. I have had no other problems with Windows Defender updates in the past - it was the first.
Thank you.
Maybe you are looking for
-
Yet once I get the message - Update Failed - in my profile after I've updated (as admin) in win XP Home - SP3.I checked the Task Manager and PowerShell (as administrator) that the only case of FIreFox running you Bleeping error message.FF works well
-
Key broke and I don't know how to put back on!
I noticed that my left key was difficult press then I cracked it to other computers can snap them on.I pulled out the dirt, but the key will not go back. What should I do?
-
2 3679-27U ThinkPad Tablet has obtained 3 G + 4 G LTE installed antenna? If Yes, then I can buy a card of WWAN 4000 Gobi unlocked for her!
-
problem installing Windows while trying to download itunes
I am trying to download itunes and I always get an error to Windows Installer. I tried all of the corrective actions; uninstalling, reinstalling, revo, etc.. I don't know what to do now. The computer is an Acer. Windows Vista. 32 bit OS. x 86. Trying
-
When I start my computer Windows 7, it starts but nothing appears on the screen.
Original title: startup problem Hello. When I start my computer win 7, it starts (fan starts, dvd disk drive turns on, lights on the Tower of keys on and even usb ports give power IE can charge my phone by usb cable), but nothing appears on the scree