PC laptop Envy 15: WiFi keeps falling after upgrade HP Envy 15 laptop for Windows 10

Similar Questions

• I am considering upgrading my laptop for Windows 8. What can I expect if I do this?

  You may want to consider upgrading your laptop for Windows 8, but don't know what to expect or if it is compatible or not.

  If you are in this category, then you will find this site useful.

  It will give an idea of what to expect with possible isuses and a link to a tool for verification of compatibility at the bottom.

  Blink on following: HP has tested my computer with Windows 8? at the bottom of the site and enter your product number.  This will tell if the system has been tested for Windows 8, and if he can or can not get updates driver and software Windows 8.

  I hope that the site will help those who are considering upgrading to Windows 8.

• AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  AFTER YOU INSTALL SERVICE PACK 1 FOR WINDOWS VISTA, MY COMPUTER WILL NOT START SAYS UNATTENDED, DLL

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with my cc speedgrade since I updated my laptop for windows 10

  Hi, Pleas help me!

  I had a problem with my cc speedgrade, since I updated my laptop for windows 10. whenever I want to start speedgrade there is an error warning that tells me speedgrade does not work? did anyone else have this problem or someone has an idea to fix

  Best regards

  Jan

  Post edited by: Kevin Monahan

  Reason: The title was too long

  Hello

  I just solve my problem... Directory settings user removed from SpeedGrade and now everything is fine!

  C:\USER\xxx\AppData\Roaming\Adobe\SpeedGrade\9.0\

  Christian

• Ethernet/Wifi keeps falling since the upgrade to windows 10 on Inspiron 7537

  After about 3 attempts to upgrade to windows 10 8.1 I clicked inadvertently this prompt annoying to try again, and finished the upgrade this time.

  Nothing wrong with it except the Wifi and ethernet keep falling. If I do repair troubleshooting or deactivate/activate my ethernet card, then it works again for a few minutes before falling again.

  I've installed every update that is recommended by the Dell Web site, but it has not changed. I have the Inspiron 7537

  Someone recommended measures to fix this can?

  The above didn't solve it for me. Someone else had the same problem

  Google windowssecrets dot com Windows-10-Realtek-PCIe-GBE-Family-Controller-Intermittent-ethernet-disconnect

  or this icon might work for you:

  

  Suggestion of his "Realtek RTL8411B-US Ethernet controller driver"- and valleys drivers listed are outofdate

  On my problem machines - cards - Device Manager Realteck PCIe GBE Family Controller driver Ethernet properties - network says its version "realtek PCIe GBE Family Controller" 10.1.505 2015 - 05/05/2015 driver date

  Solution download the latest driver realtek.com.tw - Downloads\DellDrivers\Install_Win10_10008_05202016

  This installed a driver 10.8.31 2016 date of 11/03/2016 and working pilot.

  So to make sure I unisntalled, restarted - he discovered and reinstalled - and now networking is good.

  Phew! thus appears the Dell download downloaded drivers are out of date.

• Dell XPS Ultrabook 12 has network using WIFI connection problem after upgrade to Windows 10

  I have a Dell laptop XPS Ultrabook 12 that worked fine on Windows 8.1. When Microsoft prompted me to sign up for upgrade to Windows 10, I hesitated, but finally, I signed up for it. In recent months, I have been asked several times upgraded to Windows 10 but I just ignored and delay the update as much as possible, because I need to work with the laptop and I can't afford to have problems after the upgrade.  To my horror, Microsoft forced an install of Windows 10 this morning without allowing me to delay and just after the upgrade, I can't connect to my existing network. I have therefore no access to the internet and I am currently typing this complaint using another PC. I noticed that the laptop can connect to the network automatically when I walk my router but the connection will last only a few minutes, and then he'd cut off. I tried to connect and the message I get is "unable to connect to this network. I checked with "ipconfig/all", wifi said media disconnected. I checked with the Dell support website and downloaded and installed a newer driver, but the problem persisted. Apparently the surf on the internet, this problem is faced with a number and any suggestions to fix do not work (after that I tried).

  Help, please.

  You should be able to go back to 8.1 for Windows by following the instructions here:

  https://www.YouTube.com/watch?v=2Y3uc2FWlK0&index=3&list=PL1RkaknDn7v-w5LEVIDvTCvmKZ_1_NcZz

• HP 110-023w Desktop H5P41AA: network adapter keeps droping after upgrade to win 10

  After the upgrade to windows 10 I am able to get on the internet, but when I go on a site it says "cannot display page" or gives a "404 error".  A few times it will go not to the page, but most of the time. Try refreshing page and mighi work 1 on 3 to 5 times. Pilots refreshed and same results. Help, please

  Hello @stanback,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  "I understand that your computer displays an error message indicating that the"page cannot be displayed"or gives a ' 404 error ' after upgrade to Windows 10, and I'd be happy to help you!

  According to the list of compatible drivers for your desktop computer, there is currently no Windows 10 NIC drivers or software distributed at this time.

  In the meantime, I recommend that you follow the steps described in this document on products HP - where can I find Windows 10 drivers and software for my model?

  I hope this helps!

  Best regards

• After you install service pack 2 for windows vista

  After installing service pack 2 for windows vista on my HP laptop, I started having a few problems. First off the computer would not go beyond the Welcome screen because he showed that an update was the installation (step 1 of 3:0 % etc.) and the computer reboots before finish. It kept the case whenever I started upward, even on safe mode. I tried to restore, but it would never be completed and nothing else would work. Now I can't go beyond the microsoft loading screen because it shows a black flat screen with no cursor. I can't enter safe mode. Help, please. Safe mode only shows the start screen but won't start so I can't access the control panel and tried to boot to the last known successful startup but it failed.

  Hello

  Try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• cannot access the internet after upgrading to firefox 30.0 on windows 7

  After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

  Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

• Drivers Compaq cq58 325sr for computer pc laptop for windows 7

  Hello

  Someone who can help me find drivers for my laptop Compaq cq58 325sr?

  There are drivers on the HP site, but they are for windows 8... I need for windows 7.

  Thank you!

  Hello:

  First install the amd chipset driver and restart.  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

  Then you should be able to use all the W7 x 64 drivers and software for this model.

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5275376

• Driver for HP 255 G3 laptop for Windows 7

  I installed Windows 7 Pro 64 bit, on a laptop HP 255 G3.

  I need to know where can I find Windows 7 drivers for this model?

  HP WEB site offers only the drivers for Windows 8.1.

  Thanks for any help...

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Please try the 64 bit Windows 7 driver of the HP 255 G2 Notebook PC Windows 7 (64 bit) download page.

  The laptop HP 255 G3 is a class computer business and as such, may be the best answer to your question in the HP Enterprise Business Community. It is also possible to contact the HP Business Support Center for assistance with your question.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• No internet connection after installing the update of security for Windows Vista

  Security updates for Windows Vista released October 13, 2009 and November 10, 2009 still an Internet connection limited Connectivity/No. Did not help uninstall updates. To do the system restore to solve the problem. Why is this?

  drusecord,
  First thing is to update your network drivers for your system.  Then see if after the update of safety, you have a problem.  If you do, I would do the following:

  Disk error checking

  System File Checker

  Then if there are updates that you already have, but are always available to consult this information:

  Troubleshooting Windows Update: offered on several occasions to update

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The headset audio USB deforms after initially connect xbox 360 controller for windows

  Hello world.

  It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

  Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

  I have Windows XP Home SP3.

  writing in the new message: * e-mail address is removed from the privacy... *

  Hello world.

  It seems that many people (including me, now) start meeting audio distortion after they plug a Xbox 360 controller for windows on their computer for the first time. I have a headset Audio USB of Dynex Mono, and whenever I try to use the microphone, the sound comes out distorted. Also, when I try to use the earphone to listen to whatever it is that the audio is also flawed.

  Did anyone here know what I can do, so I can get the controller and the helmet the two working together in a computer? The headset works fine in another computer.

  I have Windows XP Home SP3.

  The Xbox controller draw right on the edge for a USB port, putting pressure on all of the USB bus, especially if there are other USB devices. If you get an external USB powered hub to add to your system and plug the controller, you will solve your problem.

  I had the same problem with my Creative Labs USB sound card and the Xbox controller at the same time. I picked up a Zonet similar to this (different brand):

  http://www.Newegg.com/product/product.aspx?item=N82E16817182168

  I plug my controller, keyboard, and mouse dongle in the hub and plug my sound card directly into one of the ports on the back of the PC. Problem solved! I got no sound since problem.

  SC Tom
  -There is no such thing as TMI if you request technical support.

• My product key located on the bottom of my laptop for Windows XP Edition family is not accepted. Help!

  When I entered the product key at the bottom of my laptop computer to activate the Windows desktop is said that it is incorrect. Recently I had to restart my laptop caused by a virus and that I've never had a problem and the key was accepted. I don't know what to do. HELP I'm in College and need to use the Office programs.

  The product key on the bottom of your laptop isn't for Windows (operating system), Office (Word, Excel, etc.).  You should have a sticker separated provided with Office.

• After upgrading motherboard continually prompted to activate windows vista

  After the upgrade of my motherboard and processor I'm continually request now to activate windows.  I go through the process and then it will ask you again at a later date.  I have no day the hard drive or my windows vista (vista ultimate 64 Windows) version

  Guatrau salvation,

  ·        Is this a copy retail Windows?

  ·        Or it's a copy of Windows OEM?

  ·        You have installed the latest service pack for Windows vista?

  Check the status of the activation, you can check the link below: activating Windows: frequently asked questions:http://windows.microsoft.com/en-US/windows-vista/Activating-Windows-frequently-asked-questions

  Try to install the latest service pack, you can view the link below: how to obtain the latest Windows Vista service pack:http://support.microsoft.com/kb/935791

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.