PCI-e new leave frozen Optiplex320!
System:
Dell Optiplex 320
Intel E2160 (Dual-core, 64-bit)
4 GB of RAM
160 gig HD
to install: PCI-e video card to run the installation of two screens (the integrated graphics subsystem, the expansion card 1 1)
Problem:
When I insert a card into the PCI-e slot. The system works incredibly slow, and I get "system is unable to allocate sufficient resources for this device" in Device Manager.
I tried 2 different cards up to now: nVida Geforce 9400Gt 256 MB PCI-e 16 x and a Radeon x 1300 256 MB x 16, built by HP for one of their systems)
Attempts I got fixed: (1) installation of drivers in advance and after the installation of the card if they let me (2) disabling of devices all embedded in the BIOS (3) choice of the integrated card and the PCI - e card that the main in the BIOS card (4) to change the operating systems Windows XP 32 - bit, Windows XP 64 - bit, Windows Vista 64 - Bit (5) Dell has replaced the motherboard with a double right
Always the system moving incredibly slow when the other card is installed.
Thoughts: Technology Dell sitting 2 hours, and could not understand what was going on before talking to tech support again and telling me that they thought it was a problem with Vista (I got the problem with Windows XP 32 - bit as well) and tell me to call them on a number of high priority.
Also is it possible that my processor is originally a kind of conflict with the PCI-e card? It can or mentioned were the original with the system, but the Board supports and Dell said they support Vista x 64 then!
Thoughts and any suggestions would be greatly appreciated.
Tags: Dell Products
Similar Questions
-
Just rebuilt new HP 355 G2 for Win 7 64 bit. The ONLY driver I can't locate or get to work is the encryption/decryption of PCI controller. I have installed all the latest drivers for this model/OS of both HP and AMD sites is still no luck. Utility of automatic detection of AMD and Catalyst installed software all other drivers except this one successfully and when ends says that all drivers, including the chipset are installed successfully and current.
I am at a total loss where to find this driver from a site of OEM, can you help me?
Device ID:
PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022 & REV_00
PCI\VEN_1022 & DEV_1537 & SUBSYS_15371022
PCI\VEN_1022 & DEV_1537 & CC_108000
PCI\VEN_1022 & DEV_1537 & CC_1080Thank you!!!
Hello:
You must run this driver and then install it manually.
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_133833_1
To manually install the driver in Device Manager and click on the controller of encryption/decryption IBOS who need the pilot.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp66974.
Make sure that the include subfolders is selected, and the driver should install.
Then restart.
-
Creation of new leaves in a double
HI - total noob here I'm afraid
I created a template of surveying with the first 3 generic pages for each survey/project and then the 4th which should be able to be duplicated as many times as necessary (IE one per room to control)
Is it all the same to add a small macro or similar that if a button a copy (in white) of form four will be created as sheet 5 and so on?
edited... I've read elsewhere to use subforms and flowing - is there an idiots guide anywhere, I already have the layout... and when I roll up the sheet with a subform, and then flow it formatting going everywhere and in 3 pages...
Thank you in advance, I have attached the file investigation if anyone can help it would be appreciated
SPH
I added a button on page 4 and called it "addPageBtn". For the button click event adds a new instance of page 4. The form is attached.
Form1.page4.addPageBtn::click - (JavaScript, client)
Form1.page4.instanceManager.addInstance (1);
Steve
-
Ability to create a 'new' disk partion in windows xp
This should be simple and direct, I am creating 2 new leave disc in drive C, computer management, storage, disk - right-click on the free space management provides the options to create a partition? Can anyone help please.
I also tried to create a drive using the command prompt BACK and diskpart, answer: unable to create the specified partition?
This should be simple and direct, I am creating 2 new leave disc in drive C, computer management, storage, disk - right-click on the free space management provides the options to create a partition? Can anyone help please.
I also tried to create a drive using the command prompt BACK and diskpart, answer: unable to create the specified partition?
======================================================
The following freeware might be worth a visit:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)EaseUS Partition Master Home Edition
http://www.partition-tool.com/personal.htm
(XP, Vista, 7... Editions 32-bit and 64-bit)EaseUS Partition Master. -Creating Partitions
http://www.partition-tool.com/EASEUS-partition-Manager/help/creating-partitions.htm -
transfer all the files from a hard drive to new Hardrive with windows and office suit
I tried to transer all my programs files again hardrive but without success using easy to migrate acornis.
Will I need to reinstall Office
Depends on if you have followed the instructions, immediately after the migration/clone that you will need to shut down the pc, replace the old disk with the new (leave the old disconnected) then restart. Assuming that all is OK, you then stop and connect the origonal HD as a slave, before the abolition of its partitions and then create a new.
Office "may" need to be repaired, to a certain extent depends on the version.
-
Moving a Nexus to the new VSM architecture CPU
My VSM Nexus are running on the AMD based blades. I'm slowly cut above new Intel blades. I want cold migrate our VSM before these new leaves.
Any thoughts on whether AMD to Intel would spoil anything?
It is a big question.
I don't think it will cause a problem. I'm sure it will be fine, but I did not test with to be sure an AMD box.
If you want to test it, I would do the following.
1 clone VSM
2. disconnect all the cards from the network on the VSM cloned VM (very important)
3 move the clone VSM to AMD box
4. determine if it starts
Very important to the cloned VSM has certainly no network connectivity. If you leave the network attached, you'll find yourself with two primary VSMs running on the same network with the same domain ID and causing all kinds of damage.
I would say that as long as the VSM cloned boots (which I'm sure it will be 99%) I think you'll be fine. Once you're happy she work, will remove the clone and plan your cold migration.
Louis
-
TBird will not easily allow an apostrophe to be inserted into a Word
Suppose you want to insert a ' say in one word - used. Now, I'm going to try to insert it: custom ' "-even if I put the cursor in the right place, the symbol appeared in the wrong place."
Let's try again (note that happened there by typing normal without any problems.) It's when you try to insert that there is a problem
New - leave - now I will insert the symbol. "I am done - I placed the cursor between t and s, but you will see that it seems that later she should have about 30 seats. TBird, obviously, has a sort of hang with '.
This does not sound like a problem with thunderbird.
Can you check something.
Make sure that your "Regional language" setting is set to English (it can be set to "US International English").After that, go to the languages tab, in the "Regional and Language Options" window and click the Details button. Under the keyboard settings, remove the 'international' option and keep the option of "US". Close the session and then again and retest your quote.
-
Upgrade HDD in Tecra 8200 problem
I am trying to upgrade the hard drive in my Tecra 8200 10 GB to 30 GB. I have adapters to connect both drives old and new laptop on my desk, then used cloning software to copy content from the old disk to the new, leaving the data on the old. The old and the new disks are formatted in FAT32. When I put the new drive in the laptop, it is not recognized. The configuration of the BIOS screen says 'no drive '.
I tried 2 different programs of cloning and tried the new disk using a USB external box connected to the laptop, with the original drive mounted in the laptop cloning. Still not good. I went through the whole thing with a 20 GB drive that I use in the external case, and it is not to be recognized. The 30 GB and 20 GB are recognized and can be read by, by 2 different computer, so I am prety sure that disks are OK. The 8200 BIOS does not recognize them and it doesn't seem to be a way to force the BIOS to detect the drives.
I thought that the 8200 would support larger disks, but this isn't looking too good. I hope it's something obvious that I forgot.
Any suggestion would be appreciated.
Hello
As I know your Tecra should be able to recognize the 30 GB HARD drive. Maybe update the BIOS may solve the problem. Please on Toshiba download page has the latest BIOS update available.
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_bios.jsp?service=EU
Good bye
-
How can I create 3D figures ranges? (Sum across several sheets)
I would like to summarise the content of the same cell (B3 for example) on several pages without having to select the cell in each individual record.
For example:
I want the formula = SUM (Sheet1:B3 to Sheet50:B3)
Instead of:
= SUM (Sheet1:B3, Sheet2:B3, Sheet3:B3) etc...
Is it possible to do this by the numbers?
You can create a separate table to collect data from each sheet, then add cells in the summary table.
In this example, I reproduced a sheet with a table (table 1 of the name) and named "Sheet 1" leaves, "leaf 2" and "worksheet 3". "." The value in cell B1 of each table is 1, 2, 3
Sheet 1:; Table 1: B1 contains 1
Sheet 2:; Table 1: B1 contains 2
Sheet 3:; Table 1: B1 contains 3
Can be summarized in a table like this. I added another sheet (named summary):
The first line is a heading row and the last line is a line of footer
Enter the number of table as shown in column A.
B2 = INDIRECT ("worksheet" & A2 & ": table 1::B1")
It's shorthand dethrone select cell B2 and type (or copy and paste it here) the formula:
= INDIRECT("Sheet"&A2&"::Table 1::B1")
Select cell B2, copy
Select the cells B2 at the end of column B (or), paste
Add lines when you add new leaves
-
Battery recently out faster and iPhone stops at 9%
Hello
first of all, of all the technical features of my camera.
I use an iPhone with 64 GB 6. iOS 9.2 is installed. I have the iPhone for a little over a year.
Now to my problem.
In recent weeks, I have problems with my battery.
It wears out much more quickly than before. For example, 15-20 minutes of navigation can consume up to 15% of the battery. So after a complete charging cycle read some news leaves me with 85% of my battery left.
In addition to that my iPhone radomely stops when the battery is less than 10%. This occurred mainly with 9% of the battery left.
So far, I was not able to perform a reset.
If someone could help me with my problem, I would be very grateful.
Thank you in advance,
Andreas
will have same iPhone 6-64GBS problem my phone will drop from 80% to 17% or 9% and turns off and when I plug to charge will read 80% in a min of recharge, I noticed one day that I was changing outdoor and the charge reading % declined instead of increasing
-
scan multiple pages in a single analysis - 8600 Pro
on a PC Windows 8.1, how to scan multiple pages into a single file? on Windows 7, I have no problem, I just go to the HP Solution Center and I can scan and then adds the new leaves before I save the file.
I can't find the solution Center even though I thought I installed the software on a machine to 8.1. can someone make me scroll through how to get the software and how to use it?
Hi JaneyRae, sorry to hear that you are having problems with the scanning of a multiple-page document in a single folder. Please click on the link that I provided to solve this problem.
http://support.HP.com/us-en/document/c03478505
If this does NOT resolve the problem, please do not hesitate to write again.
Thank you.
-
Windows Media Center does not detect my TV tuner card
Hi a few years back, I built a Media center PC Windows Vista worked great! incredible experience recently (2 months ago) I formatted the PC and reinstalled Windows Vista now Media center options have changed and my Tuner card is not be detected BUT if I use the software the camer card it works fine I ca watching TV and recording with no problems
I've uninstalled and reinstalled the drivers twice and today I removed the card and inserted into a PCI slot new nope still does not (sigh)
PC is a core 2 duo with 2 GB ram Intel MOBO ATI 3600 seris of graphic card tuner Kworld is
I'm suspect that Microsoft updated Media center to stop my card work! or is it because I'm at the Canada and rules are different here and that's why multimedia does not work?
Hmmmmmm
appericate any help or advice thanks in advance
-Derrick
It seems that the tuner is no longer supported by MS, but thanks for the answer Vijay
-
Cannot create the aid station in facebook
original title: facebook
everytime I try to post requests for assistance of the Facebook games new updates won't let me pop up at the end show everything once, I do everything disappears bak here where I started
Nothing to do with Windows. Contact Facebook or the Publisher of the game with their application.
And all that, precisely, is "... the new leaves me not pop up at the end show everything once, I do everything disappears bak here where I started...". "mean? Most of the words in the language of English, but have absolutely no sense because assemblies.
-
Authenticity of used / second-hand copy of Windows 7 Ultimate retail
Greetings. So, I wanted to buy a legitimate copy of Windows 7 Ultimate retail. It seems that it is no longer available new, leaving me to buy a copy of used / pre-owned. (Are BTW there other options?)
I found a seller in private through the Amazon and looked as close as possible to the Internet. all the evidence strongly suggests that it is a reliable seller with an established reputation, a copy in good faith used the marketing software. So I paid a reasonable price and received the product, including complete packaging that you would expect to find in a store, with all the certificates and product keys and hologrammed DVD and everything else looking as it should.
This morning, I installed the Win7 and activated the installation with the key of product without any difficulty. Then I found some verification page somewhere in "authentic" microsoft.com, I don't remember the URL exactly right now, but it downloads a few small .exe, whereupon the reports page entirely installation that it is authentic.
Then I found the utility to produce the report "diagnosis." the content of this I'm going to paste below down. The "292" in the product ID seems not to be a MSDN key, as I see it frequently reported here; can anyone confirm that these figures correspond to a retail copy bought in the United States through normal legitimate channels?
I saw very many reports of MSDN product keys sold with retail packing counterfeit, but this doesn't seem to be what I have?
Also, I've seen no reports of normal retail licenses copied or sold several times, so it does not seem likely to me?
Anyone got any comments on that? I am in the window where I could return this software for a refund, but I see no evidence that this copy is far from authentic and legitimate.
Is it possible to call Microsoft and have them give no explanation as to how many times a certain license had been activated before?
All advice and information is welcome!
Thank you-
-dave
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - 6JXX6 - PFYKM-HW26Y
Windows product key hash: RSlivB4lS3nS9Eegll1WssFg1es =
Windows product ID: 00426-292-1632613-85911
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {A588D448-9FFD-43E3-881D-0F21DA23ECA4} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0x00000000
Build lab: 7600.win7_rtm. 090713 1255
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{A588D448-9FFD-43E3-881D-0F21DA23ECA4} 1.9.0027.0 6.1.7600.2.00010100.0.0.001 x 32 *-*-*-*-HW26Y 00426-292-1632613-85911 5 S-1-5-21-886498224-101000718-1902776652 LENOVO 4239CTO LENOVO 8AET51WW (1.31) 20110808000000.000000 + 00031BB3607018400FE 0409 0409 Time(GMT-05:00) Standard is 0 3 LENOVO TP-8A 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: ac96e1a8-6cc4-4310-a4ff-332ce77fb5b8
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00170-292-163261-00-1033-7600.0000-0452016
Installation ID: 000460162045765430418861247543685630581216027453778691
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: HW26Y
License status: licensed
Remaining Windows rearm count: 3
Trust time: 14/02/2016-15:03:29Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID hash: MAAAAAEAAwABAAEAAAABAAAAAgABAAEA6GG6vtWkAB8orXxBwrD8OIRNskPQ9C5zActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC LENOVO TP - 8A
FACP LENOVO TP - 8A
HPET LENOVO TP - 8A
MCFG LENOVO TP - 8A
SLIC LENOVO TP - 8A
SSDT LENOVO TP-SSDT2
SSDT LENOVO TP-SSDT2
SSDT LENOVO TP-SSDT2
CO-SUBMISSION LENOVO TP - 8A
ASF! LENOVO TP - 8A
TCPA PTL LENOVO
SSDT LENOVO TP-SSDT2
SSDT LENOVO TP-SSDT2
UEFI LENOVO TP - 8A
UEFI LENOVO TP - 8A
UEFI LENOVO TP - 8AThe appeal of Microsoft not you will get this information.
I wouldn't worry, however, because the license is currently enabled. Any attempt to activate the software that also will signal being blocked on the other computer as it is activated on your.
-
Catalogue of ability in Cisco UCS Manager 2.2(1b)
Client is running UCS manager 2.2(1b), new leaves, we installed in the existing chassis, we get RAM warning as "f0502" improve us the catalog for 2.2(1b) and active catalog. The error still exist. Please advice on this error.
Upgrading the catalog must be 2.2(1b), or we can improve the catalog to the latest 3.0 version.
It depends on which the blade that you have loaded now and the memory module that is in the new blade. See section catalogue of ability to http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes... for modules of memory included in the current version running. If it is included in any catalogue of higher capacity version, you can switch to any catalog version 2.2 (x) and it should be good.
Maybe you are looking for
-
How to find containing the record of the file with the projector?
Several times, because I am sometimes reckless, I save a file without noting the folder where it will. How can we find a folder containing a file using Spotlight? This is useful in circumstances more than just my idiosyncrasies. Thank you Jack
-
Please can someone tell me if its normal for the tab S8-50 Lenovo to have a buzz (noise high rise) during its use in (noise becomes louder depending on the brightness and what is displayed on the screen) I just bought the tablet today
-
HP4630: while a single 4630 - printer disconnects despite a wifi connection
I installed the drivers from HP4630 on my Windows laptop, 10, it says that it is connected to the wifi by the test pages. As soon as I try to print it tells me that the printer is 'offline' to the right of the description. I spent 2 hours trying to
-
Lack of volume control and Greyed out in the taskbar properties
Until recently (past two months) it was never a problem. When I bought this computer there nearly two years, I created my taskbar which included my volume control. He has been there since then. I have Vista, Service Pack 2. I have not changed hard
-
When I try to create a link in dreamweaver bootstrap in the usual way I can't do? I selectionner select text, bind it to another file and the text I've selected disappears? Why can't I create a link in dreamweaver?