PCP and Questions OATM

Similar Questions

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• I think I erased my OS and question mark flashing now appears

  Here is what happened. Haha I actually went to utilities OS X using the command (⌘) r. Then I clicked on the OS utilities and I removed my boot drive.        I restarted the flashing question mark appeared on my start, I tried to restart again and command prompt - R key and it directly me linked to Internet OS X recovery where appears the rotating Globe. What should I do next? I want to go back to work. Help, please. Thank you.

  Hello. Have a look here If flashing question mark appears when you start your Mac - Apple Support

• Answers and questions of security

  Hi all. I can't change my password because I forgot the security answer. There is no Reset button.

  How can you change security Q and r when the iPad Pro has no Reset button?

  Follow these instructions

  If you forgot the answers to your questions of security of Apple ID - Apple Support

• E-mail address and question iCloud

  I use Mail 9.2 in OS X El Capitan.  The problem is an e-mail sender/recipient unwanted but persistent recurring which always forces me to change the e-mail address of the recipient manually.  Here's how it goes:

  I receive emails from x which is sent from the account x now uses exclusively.  Previously, x maintained two accounts of different e-mail and addresses - I deleted the defunct address x info by his Contacts on the PC as well as Contacts also stored in iCloud.  ICloud information contains is no longer the address defunct e-mail, but Contacts on the PC he maintains he is now grayed out, listed under the heading of 'other', and I can't edit/delete it.  Whenever x sent me an email from the email account it uses now the old defunct email address will appear as the sender and if I don't manually change to the correct recipient address - this is if I use 'reply to sender' - the email is only sent on behalf of the deceased.  "Deceased" means the x e-mail account is now no longer in use.

  How this issue can be resolved?  (1) I would completely remove the old e-mail address. (2) when I receive an email from x, I love to show the correct address of the sender; and (3) when I send an email to x, I like that it appears as the recipient's address whoever x uses now.

  Another question: after I went to iCloud to modify the coordinates of x, all my contacts on PC's Contacts have doubled and slept that way, even after disengagement from iCloud, forcing me to manually delete all the duplicates.  Why is this happening and how can it be avoided?

  Hi dubwisedude,

  Thank you for using communities Support from Apple! I'm sorry to hear that you're having these problems with the Contacts; I know how that can be frustrating. If that specific contact information is relatively simple, you can ensure that you have a copy of it (copy paper, if necessary), then try to delete the contact from iCloud, which should also remove the synchronized local copy (otherwise, you may need to remove it manually). Once deleted, you would then recreate the contact and see if the same behavior persists on received emails recently. You can find the following article useful:

  iCloud: remove a contact

  If you continue to have other problems with iCloud Contacts, you can also find this article helpful:

  Get help using iCloud Contacts, calendars, or reminders - Apple Support

  If you see duplicate contacts after establishing iCloud Support Apple - Contacts

  Concerning

• Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

  SpeedFan 4.25 is on my Toshiba Satellite SM30 604.
  Until recently, the CPU usage shown was variable.
  Compared to a low percentage (green dots) to somewhere around maximum, according to what I was doing (I have never game, but use purely professional things like Word, Excel, PowerPoint and many websites).

  Temperatures in most of the green time, the high 40-links, the low 50-links (I then scroll to the top of the Speed01 of the fan from 0 to 50% and 50%, it starts to run). I sometimes add an external fan, I work sometimes in very hot climates).
  I have the readings of the time 4.
  Local temperature: 49 c (with this temp color varies between a Green V and a red arrow pointing upwards).
  Temp distance: 85 (with a flame)
  HC0: 26 c (with a green (V)
  Temp1: 86 (with a red flame).

  WHAT ARE THE TEMPERATURES IMPORTANT? WHAT IS LOCAL TIME? TEMP DISTANCE AND TEMP1?

  These very high temperatures, I've had for a day. The fan is working (I hear it, I can feel. "I can see, because I partly dismantled the laptop.) But the Speed01 is 0%, and there is no reaction on the adjustment upward. Or playback is 100% without reaction to setting down. And rotating or disable "auto fan speed has no effect.
  And without any other program running, the CPU usage increased a few seconds after switching on to 100%. I do not notice a significant slow down in the speed of my applications when I start using them. And a virus today scan did not reveal all the important things.
  I can't activate my taskbar more.

  Who has some answers for me. Green in this area?

  Thank you

  Hello Han

  Your ad is very nice and very interesting, but you'll be very happy if someone can explain all this because you are using a non-Toshiba software. It is always recommended to use the original software because software Toshiba designed has been tested and it can just to protect the hardware components.

  Use of software from third party is always at your own risk, and if you have any problems or questions, please contact their own support. They have much more experience with your applications.

  I can just tell you that you should be careful where your laptop is placed and make sure that the device can take a deep breath and cool down properly.

  Good luck!

• Suggestions and Questions about the upgrade my Hardrive Mac and Ram.

  Hi This is my first time asking something in the forums. (At least I think) Well anyway, I got the Macbook Pro Mid 2012 13 "with the retina also runs the OS El captain. I do computer for school and sometimes animation video editing and ive noticed some performance as my projects get bigger and bigger issues. I want to improve my mac, but I'm not very tech savy and don't want to do something useless, so I had a few questions, I wanted to ask you.

  Do I need for my hard drive and my Ram?

  What effect will the upgrade of my Ram and what effect will be upgrading my hard drive with an SSD?

  I saw this SSD online and thought of novice opion that sounds get Id more bang for my buck (link) with her. Is this good? What more to kill? WiIll it still works? Could you suggest some other good affordable options?

  My next question if I decide to upgrade my Ram can provide you with some good affordable links to buy of new RAM sticks, is also 8 GB, the best he can do?

  My next question I watched a few videos online and by installing the updates level looks really easy and fast. But I use bootcamp (to play games sometimes), and I wanted to know if I save my files on my drive as ive seen people do videos, (something to wipe the drive and put it back in after installing updates) will be I lose my windows 7, I lost the disc to reinstall and he check so I really want to buy a new also do not want to lose the things I put in memory.

  From the retina MacBooks you is impossible to pass the ram as it is soldered to the logic board. As with the hard drive, it's just a card ssd and you can't get those anywhere because their hard to find.

• Problem and question version of LabVIEW

  Hello world

  I want to install Labview 2012, I have Labview 2011 now and all of my programs, built in 2011, don't you think it is a problem when I install Labview 2012? all my programs are ex file. (I have licnese labview).

  I have another question regarding Ex file, I'm using PXie4330, 4353 and 6363, is possible to generate the executable file for them? as they run into the target?

  Thank you

  Hello

  As crossrulz said, you can install LabVIEW versions side by side. View 2011 and 2012 with is no problem (I have 2010, 2011 and 2012 all on the same machine). You mentioned that your programs are PMExport. I assume you mean that you have LabVIEW executable (.exe) written in LabVIEW 2011?

  Executables do not require the development environment to run, but they do not require LabVIEW runtime engine. For executables built in LabVIEW 2011, you will need the runtime LabVIEW 2011 (or the 2011 SP1 one). For screw written in 2011, you can open directly into the development environment 2012 and run them. Note that if you save the they will be now 2012 screws and Save for the previous Version , you will need to reopen them in 2011.

  Hope that helps,

  Jeff P

  Product Support Engineer

  LabVIEW R & D

  National Instruments

• Internet Explore cause and questions

  Hi all

  In my organization, we have windows 2008 r2 server. and there's that Clint thin 12 and 12 people accessing the server for the site Web Nakuri and Monster Internet Explore. It worked well all suddenly all apps crashes after 2 to 3 hours and internet explore no longer take restarts for that. After the reboot, it works fine.  I took the results of the SFC scan found good. in the event records its showing application error. and one thing I must mention my server ram is 4 GB I it will increase today.  but please guide his problem to me at all times.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• cannot access my account: wrong email, I forgot the password and question

  I try to access my live account, but I can't because I don't remember my question or password I always have it on my xbox and can use it but I just cant get in there to change the email on this subject because the top is incorrect - can someone help me

  Email my real account
  E-mail address is removed from the privacy *.

  Hello

  I suggest you to send your query to windows live ID.

  http://answers.Microsoft.com/en-us/windowslive

• Cannot access the internet. Have a bunch of yellow exclamation and question marks on Net work adapters and other drivers__

  Cannot set up internet access. Have yellow question mark points of network adapters and other devices (other drivers)

  Hello

  Maybe this can help, http://www.ezlan.net/faq.html#ghost

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• SanDisk Ultra Plus, I have some concerns and Questions

  Well, I bought this at Wal-Mart todayanDisk adapters Ultra Plus SAFE-1 card with adapter (SDSDQUIP - 064 G-AW46).

  First of all, I can't find this card anywhere, and even though I bought it at a Wal-Mart, is not on the website here either.

  And I didn't buy the last one either.

  When I look on this site for it, the closest I can find to him is the SanDisk Extreme.

  The SanDisk Extreme has:

  • Playback speed: up to 80 MB/s
  • Write speed: up to 50 MB/s
  • I say this, this is the card that I buy a speed up to 80 MB/s * 533 X.

  And the UHS-1 card with adapter SanDisk Ultra Plus adapters:

  • Playback speed: up to 48 MB/s

  This card would have extreme firmware more about it?

  Or is it a special edition?

  Here is a reference of Crystal disc brand I did on this topic until I put it in my LG G4.

  Used for the test: 2000-2C29WM, AMD APU E2-1800, 8 GB HP laptop. DDR3 Ram, Windows Home Premium 10:

  

  Hello

  in this case you can't find not the new version of the ultra card on the sandisk Web site because the site was not being updated yet, however the 80 MB/s is the most recent map version and the far more with 80 MB / s is the previous version of the map.

  For more details on how and why you can also get in touch with sandisk support directly who can answer your questions on the map

  Here is the link to contact

  http://www.SanDisk.com/about-SanDisk/contact-us/

• keyboard keys change symbols in red. I would like to change itself can use quotation marks and question marks instead of the capital, etc. who are now working.

  keyboard keys change the symbols in red on each key.
  I want to change back so I can use quotes and mark instead of the capital points, etc. that appears now, when I hit the SHIFT key.

  What type of computer you are using

  in what application are you facing this?
  You can also try to perform a system restore to an earlier time to check if the question

  If it's a laptop computer consult the manufacturer for help

• Failure of keyboard with apostrophe and question marks, etc.

  apostrophe resembles e.-c question mark e. E, hooks quotes ^ C, etc.

  Usually held on the left ctrl + shift will reset the problem, but this does not work, no more to restart the computer.

  It's a sticky key problem, but can't do it reset.

  It does not resemble a sticky key problem. It seems more likely that your keyboard can be set up for the wrong language. Reach
  Panel-> region and language , then the keyboard & language tab. Now click on theChange keyboards button then the General tab. Verify that the correct default for your keyboard language is set.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Japanese poster in the form of strange symbols and question marks

  Can someone explain to me what's not here? I'm trying to run a Setup program for a game that is in Japanese but... the Japanese is replaced by question marks and other symbols of weird points...
  I have screenshots

  Name of the installer:
  [IMG] http://i.imgur.com/Rypbk.png [line]

  Installation program in the taskbar:
  [IMG] http://i.imgur.com/JZkEi.png [line]

  I looked on google and all I saw was how do I change my language of Windows, all I want to do is get these displays correctly.
  And I am running Windows 7 Home Premium 32 bit

  HI, because you have not installed Japanese language for your windows, so the text are corrupt, may not display correctly.

  Solution:
  1. Go and get the Japanese for Windows 7 language pack. http://Windows.Microsoft.com/en-us/Windows/downloads/languages
  2. Install it and then restart.
  3. OK, the problem is resolved.

  Hope that helps. :)
  sonyanda
  fanhow.com -Wiki answers questions about the software.