SanDisk Ultra Plus, I have some concerns and Questions

Similar Questions

• The SanDisk Ultra Plus 64 GB sdxc card memory not recognized by PC even if PC shows these letters to front

  SanDisk memory card Ultra Plus sdxc 64 GB not recognized by PC even if PC shows these letters on the front of the hard drive. From time to time I can get it to recognize the memory card but mostly not. Then I manually to the top of my camera (Canon T3i) onto the PC and make my photos to the PC camera is very heavy! Does anyone have this problem? I can't find anything online that answers my question. TYIA solution to anyone.

  Simple solution is to buy one of these small memory card readers.  Costs about $5.  Plug the memory card on it.  Plug it into a USB port.

  If still not recognized, the memory card must be reformatted or replaced.

• Impossible to format my Sandisk Ultra Plus 16 GB MicroSD

  Hi, I bought this product about an hour ago from Bestbuy. It was sealed in his case, there is no way, it was a homecoming.

  When I insert the SD card with the inside microSD adapter to my computer, it asks to format the drive. Then the Format Windows removable disk appears and says that my card is 30.6 MB... When I click on Start to get in shape, with the default given the options, it returns back that it is impossible to format.

  I tried the SD Formatter 4.0 card. He says that it is write protected, even if the switch is not in write protect mode.

  I have a MicroSD USB Reader. I tried this way too, and it does not work.

  I would like to get assistance.

  I found my problem.
  As well my card reader USB MicroSD and SD of the laptop slot could not format/read it. I don't know for what reason. But they were a couple of years.
  Today, I bought a new card reader. I could open the drive very well and format.
  Hope this helps some people.

• Very low yield, 256GB SSD Sandisk Ultra plus

  I just installed a 256 GB SSD Ultra + on my Samsung NC110 Netbook with chipset Intel NM10, tweaking all active (TRIM, AHCI, etc.) and the SATA 3 mode works as expected.

  The SSD is pretty slow: with the AS SSD benchmark tool I get 243 MB/s read and 214 MB/s write, while I was expecting something like 400 MB/s.

  Anyone had similar low values with the same Intel NM10 chipset?

  http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=5173AF7BA5CA7304

  Looks like your computer is only SATA 3 Gb. the speed you see is normal.

• My office has disappeared that I still have some toolbars and quick launch and commissioning

  OK my desk top seems to have disappeared I still everything

  Hello NormaRawlings,

  Please take a look at the key explorer in the registry to see if it contains a value that will hide the office.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Start > type Regedit

  Click on continue in the UAC window

  Navigate to the following key

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Search for a value in the right pane, called NoDesktop.

  If it exists and its value is set to 1, then change its value to 0.

  Conclusion of Regedit.

  Restart the computer.

  Please note that these measures were according to Smittychats post at the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/how-disable-desktop-icons-forever/52d0932a-175C-4B48-982d-3022d388b730?page=1&msgID=4d03424b-594f-4e19-b7fd-604057ff5d4e

  Let us know if this can help, or if you have any questions.

  Best regards

  Matthew_Ha

• AMT irregulars-12535, do you have some Diagnostics and now need a little guidance

  Hey guys,.
  I tried searching and searching for this error, tried a couple of different things but now that I'm stuck. I have to say first of all that this forum is very useful so thank you to everyone who contributed and responded to questions.
  
  I'm going
  This is the error message I get randomly:
  Fatal OR connect error 12170.
  
  VERSION INFORMATION:
  AMT for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
  Protocol TCP/IP NT for IBM/AIX RISC System/6000 adapter: Version 11.2.0.1.0 - Production
  Oracle leaves NT Protocol adapter for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
  Time: July 5, 2011 21:20:09
  Tracing not lit.
  AMT error struct:
  NS main err in code: 12535
  TNS-12535: TNS:operation expired
  NS secondary err code: 12560
  NT main err in code: 505
  AMT-00505: Operation timed out
  NT secondary err code: 78
  NT OS err code: 0
  Customer's address: (ADDRESS = (PROTOCOL = tcp)(HOST=10.66.6.89) (PORT = 1526))
  
  
  
  What I did is on the server (database 2) in the listener.ora machine set INBOUND_CONNECT_TIMEOUT_LISTENER = 0
  I also install a sqlnet.ora file in $ORACLE_HOME/network/admin with settings
  DIAG_ADR_ENABLED = OFF
  SQLNET. INBOUND_CONNECT_TIMEOUT = 0
  
  
  in the computer of the customer (1 database) I have the same as above in the listener.ora set INBOUND_CONNECT_TIMEOUT_LISTENER = 0
  I also install a sqlnet.ora file in $ORACLE_HOME/network/admin with settings
  DIAG_ADR_ENABLED = OFF
  SQLNET. INBOUND_CONNECT_TIMEOUT = 0
  
  Also I put in the files tnsnames.ora (SERVER = DEDICATED) (just to be on the safe side)
  
  I thought with this that it shouldn't a tns error at all... I get them again every day at random times.
  
  I tried to talk to the networking but lets just say I need it somehow proof that his question there are not mine.
  
  Thanks in advance for your help

  867954 wrote:
  AIX 5.3 operating system info

  Thanks for your quick response... Yes, I did
  Man ping

  the command I used was
  tnsping oisa1 2000

  but im assuming that it is only for 2000 pings... How can I make the infinite pings?
  what im doing is tnsping ois1 2000 > pingtest.txt how can I add a timestamp in this newspaper?

  I'm sorry for the newbie questions...

  While 1 = 2
  do
  tnsping ois1 2000 > pingtest.txt
  Date > pingtest.txt
  fact

• I have some 24 and 32-bit PNG. On the bridge Panel, I don't see the value of bit depth.

  I see the value of bit depth (8-16-32) for the PSD but when I generate a .png32 that this value does not appear on the Bridge Panel file properties; I check on Panel detail of Windows image viewer and it says 32 bit. Thanks for your help!

  Hi iolnation,

  No, Bridge does not show the depth of bits for PNG files. You may apply for a feature on the link below, telling them why it is important for you to see the depth of bit for PNG in Bridge. I'm all for anything that will affect better PNG.

  Community customer Photoshop family

• Some problems and questions about StorE TV

  Hello! I bought stor.e tv a week ago and there are a number of issues, in order of personal importance:

  1. it slows down audio playback. It happens when the standard reading mp.3s on my stereo via the analog output - my music sounds weird, slow and with a reduced frequency. I have to go back change, the exit HDMI (normal speed part, no problem), then change new analog, navigate through folders to find the song I want to play and replay - voila, it works normally. Altogether in a complex way to play a song correctly, you do not?
  2. when there are ID tags (especially album covers) to the songs it takes forever to go from one song to the next.
  3 audio settings are often forgotten after the device has been stopped normally remote control only - you turn it on again and is not how I left it, but back to HDMI. So, I recall at any time check the settings before playing a song? Even if, in a tortuous path, that ^ s have useful to the problem of the mind 1.
  4. do not display correctly Cyrillic subtitles.
  5 pretty hot.
  There are other things, too (no playlists, not slow, slow to develop, etc.). I'm actually writing than just before you go back to the shop and ask for my money back.

  Bravo, guys!

  Hello

  > 4. Does not display correctly Cyrillic subtitles.
  Yes, has been mentioned in other threads seems that not all the subtitles are supported.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51945

  With regard to other issues.
  I think that you should try to reset the store default TV E again and should check how it works.
  In many cases, it helps to solve these annoying problems.

  Welcome them

• SanDisk Ultra 32 gb, looks like a removable disk but not volume

  Hello

  I am new to this forum and have traveled all over and the rest of the internet to find a solution but could not find something that works.

  I have a few readers Sandisk Ultra 32 GB Ultra (not back to the top of those).  They worked fine for the last year or two, but recently I can't display the data on my Vista 64 bit PC.

  They show as a removable drive and when I click on them, they show as empty.  I look at the properties and both used space and free space is 0.

  In Device Manager, they show under hard drives.  I tried to change the drive (as well as the removal of the letter) letters and nothing seems to show the volume.   It seemed to me remember what they used to appear under my front USB controllers, so I wonder if things now of Vista, it's a different type of player.

  There are video files on the disks and I have confirmed that they work because I can still play the USB drives via my USB drives BluRay port.

  I uninstalled the drive then plugged found Vista and then he said that he successfully installed the driver and back in.  There are no conflicts in Device Manager when it is plugged.

  I have used other USB drives (thought the USB port was dead) and 3 other discs (2 other Sandisk and 1 Kingston) times Plug and work perfectly.  It's only the Sandisk Ultra that I have the problem with.  Other Sandisk 2 those who are not of the Ultra.

  I tried to copy files to the disc just to check if it was reading wrong volume, but it actually gets a message that the location of my source files is missing, which is strange because I can move the files to other drives or places, but she only errors when I try and place it on the Ultra with volume 0.

  I'm totally stumped.  I hope someone can help.

  I should just wait a few more minutes to do a little more research.

  My apologies.

  The questions got Samsung Kies.  I stopped the process running in the background and it worked perfectly.

  Everything was good.

  Feel bad display.

• SanDisk ultra fit 128 GB of low size, slow and defective

  I just bought 3 USB keys at amazon. A 128 GB PNY (very fast) and 2 Sandisk ultra fit (32 GB and 128 GB). The Sandisk 128 GB must errors about 114 Go in 115 GB of total space. I plan to replace with amazon, but wonder it is possible to download some software from Sandisk to try to 'fix' the faulty unit. I've never done this before, where my question. I read on some overheating problems on this forum that could be the cause of the cells fried in flash. I don't know anything about, but it raises concerns about the ability to keep the camera steady for the 5-year warranty you provide. I have reflected on a downloadable software on your Internet site for repair, but found none. Could you please answer to, it is possible to fix it or if I better return it for a refund and get another brand or maybe even just a simple replacement. Speed of 4K of the 128 GB it is half that of the 32 GB (read and write - 3½MB/s against 7 Mbps and 2 Mbps vs. 4 MB/s). Usable storage of 128 GB of Sandisk's 115GB. The PNY 128 GB usable storage is 126 GB. The issue of size is of no interest, just raise it now that I had a problem. However, the issue of speed could be linked to the flash error and raise a few red flags.

  Thank you

  Kasper Lindvig

  I'm not aware of all solve this software for your problem, and even if there is I would not recommend it for a new purchase.  What you bought seems to be used or defective and I return it.  And I would buy one that follows from a different source.

  You also have the option to send it to SanDisk for a replacement, who will be guaranteed is not a used one.

• MacBook Pro and SanDisk Ultra II 960 GB does not

  I bought two SSDs to 960GB SanDisk Ultra II for installation in a Late 2009 27 inch iMac and a MacBook Pro mid-2012. I could absolutely not anything other than a white screen on the 27-inch. I could get the external computer to boot via USB, but when it is plugged in SATA, it wouldn't start. OWC had a few caveats on the NVidia SATA bargaining chips down to a 1.5GBs of speed when you try to bind to a 6 G drive. I replaced it with an Electra OWC 3 G Reader (which worked perfectly). I returned the unopened SSD.

  My next goal is to enter the SSD in the MBP. He chips Intel SATA and is not supposed to have bizarre problems. Once again, I have installed the operating system and started via the USB port, no problems. It does not start when installed internally via SATA. If I drill the old HD, it starts immediately. The SSD makes a folder with one? in the middle.

  I have repartioned the reader for Mac. I also tried to clone with all disk utility, same result. I guess I could try SuperDuper or clone of carbon. I just installed another OWC drive in an other iMac and used disk cloning utility, and it worked perfectly.

  I wish that I had bought the OWC drive now, but I'm stuck with this open disk and I would like to make it work. Has anyone else had problems? I think that the drive is bad, but when in a dock player, it works very well and will start the computer via USB.

  When the SSDS was to the iMac 27 inches, she would not even allow the target disk mode, ot any source of start-up. I really thought that the video card was defective at first, but this player has been creating chaos.

  All the words of wisdom are welcome.

  To make a long story short, it's the SATA cable. The computer would boot from a classic HD so I thouhgt the SATA cable was OK.  Apparently, when these cables fail, they can operate at low speed, but there still may not work at all in trying to negotiate a connection with a 6 G SSD speeds. I also noticed that with the wrong cable, the link negotiated with the convnetional reader speed was 1.5 Gbit/s which was lower than expected. I replaced the cable of a reputable vendor and I got another job of SSD. I think the SanDisk that I ended up returning was really beautiful AND compatible.

  I was clued in after a brand that I know with certainty was compatible would not work either. PowerBookMedic sells relaible cables. "cheap" replacements are not recommended.

  Hope this helps someone else.

• I have some PDf files on my computer and I want to add to my iPad

  I have some PDf files on my computer and I want to add to my iPad, I add files to iTunes and they will only music and I cannot change them at the podcast or iTunes U format. I made some how manage to add to the iBooks on my phone app, but the print is so small and difficult to read. I try to add them to my iPad and can't do it. Any info is greatly appreciated.

  Your Mac has the app iBooks on it (i.e. running Mavericks, Yosemite or El Capitan)? If it is then you add PDF files to iBooks (file > add to library) no iTunes - if you then connect the iPad to your Mac iTunes, they should then show on the tab 'books' selection and timing to the it

• I haven't used itunes for some time and now have a new PC.  I've updated my account (change password) but when I connect to my music went?

  I haven't used itunes for some time and now have a new PC.  I've updated my account (change password) but when I connect to my music went?  I am working on Win 8 and still have part of my collection on an ipod.

  Unless you subscribe to iTunes game (which is not a complete solution anyway) your iTunes Library is on your previous PC - solution the easiest is to copy from here or from a backup.  For more information, see How to move your iTunes library to a new computer - Apple Support .  Previous purchases from the iTunes Store may be available for re - download - see download your past - purchases of Apple Support.

  If none of these approaches allows to recover the contents of your library, see user turingtest2 on recover your iTunes from your iPod or an iOS device library for a list of tools and methods that can be used to copy the media etc from iPod to iTunes.

• dad bought me a computer PORTABLE from NUTRIGEST I HAVE BEEN out of the CITY FOR SOME TIME AND LATER BETWEEN the AUTHENTICITY CODE PRODUCT, AND IT's not SAYIING VALID, BUT I KNOW THAT CANT BE REAL CODE IS

  dad bought me a computer PORTABLE from NUTRIGEST I HAVE BEEN out of the CITY FOR SOME TIME AND LATER BETWEEN the AUTHENTICITY CODE PRODUCT, AND IT's not SAYIING VALID, BUT I KNOW THAT can NOT BE TRUE

  If it is a new machine call or go to circuit city and get them fixed.  If they sold you the laptop, indicating that it included Windows XP then the onus is on them that provide you a valid COA and the product key.

  John

• I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  You may be able to download the drivers from the web site of the manufacturer of the computer.