Pe11: Audio VERY loud or distorted after export

Similar Questions

• Audio goes out of sync after export (PP CS3)

  Hey there!

  So I had a few problems with first Pro CS3. My main problem is with the audio goes gradually out of sync after export. I am trying to export in 1440 p (2560 x 1440). I export in h.264 with 60 images/s.

  1. Original file type: AVI
  2. Original Frame height and width: 1680 968
  3. Original Audio bitrate: 1411 kbps
  4. Original Audio sampling rate: 44 kHz
  5. Original frame rate: 60 fps
     Data rate: 1191254 kbps
  6. Total bitrate: 1192665 kbps

  Before installation:

  

  Can someone help me and tell me what are the audio settings I should export in correlate with 1440 p and 60 frames per second? Any help is much appreciated, and I look forward to your responses.

  Much appreciation,

  -David

  What codec is used in this avi (as it isn't a regular avi of a camera) and if the framerate is variable, you need to convert to constant framerate before importing it in first.

  Converter for example Handbrake.

  Bit rate may be too high. Don't forget that CS3 is pretty old.

• Audio/video Out Of Sync after export

  Hello, I hope I gave enough information below. I searched high and low for an answer to this and can not find a solution that has helped.

  I have an audio problem be out of sync a few images when exporting.

  First Pro Version CC using 2015.3 works on a Windows 7 PC with 16 GB of RAM.

  Source footage is Panasonic Lumix g-7 MPEG Movie wrapped in .mp4.

  Rate of the source footage is 59.94

  No external codecs are used.

  Here is a screen of the properties panel to one of the source images files in Windows.

  

  Here is a screen of the sequence settings

  

  Here are the screens of my export for video and Audio settings

  

  Here is a screenshot of the properties of one of the image source files window and the properties of the sequence.

  More large window - properties of the source images

  Small window - properties of the sequence

  

  However, the problem does not occur when I check the "Match sequence settings" at the top. I want to make so files won't be as big as when I pay with these settings. Just looking for YouTube, but even this preset produces the problem, I'm going to.

  

  Any help is greatly appreciated!

  The problem seems to be that I was unaware of a 2 ms latency when recording with a wireless LAV microphone system. I moved the audio advance 2ms and the delay has disappeared.

• Help!  Audio goes out of sync after export.

  OK, people. I need your help. I have a looming deadline of THIS FRIDAY to put this.

  I have a multicam editing over a show that runs 1 hour 20 minutes. It renders perfectly in the timeline panel, all the video and audio perfectly synced. Looks and sounds exactly like what I need.

  When I export the video in form file H.264, audio not get synchronized with the video of 13 frames! But that's not all... It doesn't go to the complete audio track. There are about 50 minutes in the middle of the video where the audio goes out of sync. The audio at the beginning and end of the video is aligned perfectly in sync. It is just the central part which is twisted.

  What should I do?

  This has never happened before, and I have worked extensively with multicam in first Pro CC before that. Never been a problem. I tried to uninstall and reinstall the first and also remove all media cache files, but still no dice.  I also tried to copy the clips in a new sequence in the same project, copying the clips into a new sequence in a NEW project, the nesting of the sequence... nothing works.

  My configuration:

  MacBook Pro retina (Rev A)

  First Pro CC (latest version)

  Panasonic GH3 images in 1080 p 24 p AVCHD timeline

  3 cameras & 1 audio file to WAV in Multicam

  Any help would be greatly appreciated!

  OK, I figured out how to fix it:

  1. In first Pro CC, choose SEQUENCE > DELETE RENDER FILES.
  2. Try to export the movie again.

  It worked! I exported the same sequence, and it took a lot of time to do a new rendering of the audio files, but when it was finished export audio and video are in sync. I don't know what caused it, but this fix, so I hope anyone else having this problem can save a lot of time in reading this.

  See you soon!

• Matte & low - audio sounding after export

  Hello

  I am editing in Premiere Pro CS4. If you see the images below, it will tell you a little more about the system and the parameters I use. I gave my client a DVD and she complained the audio. I asked him to send me a description of what she was not happy, and she wrote this: "with audio, the sound quality was lost, it was not loud and clear. And the base and the beats were very low. Came out very thud '. Now, I agree with her. One of my fellow editors that uses another system produced a video and immediately I noticed the sound was wonderful. I could feel the base and hear several instruments.

  My original audio peaked like this:

  

  I asked someone what was the best level to set in and he said that he peak at-6. So now my audio picks like this:

  

  After the filing of the complaint, I asked a few more people, and they said that the green audio level should be level 6. So now my audio picks like this:

  

  Now I don't know if the settings above have solved the problem, but at least on the computer, it sounds better.

  It's the Premiere version I use:

  

  This is some info about my computer:

  

  Properties of the file prior to export:

  

  Properties of the file after export:

  

  Project settings:

  

  

  

  Here is my export settings:

  

  

  

  I hope that is enough info and I appreciate all help. Let me know if you need me to gather more information.

  --------------------------

  Now, I agree with her. One of my fellow editors that uses another system produced a video and immediately I noticed the sound was wonderful. I could feel the base and hear several instruments.

  --------------------

  My question is, "How can I get my audio to sound more gutsy (base more, harder,)"

  ------------------------

  you accidentally fall in love with talent?  Is not of the never before seen in the film industry... where criticism becomes something "personal" between the Director / shooter (you) and talent...?

  Perhaps you could get closer?

• Voiceover first clip of bad quality, after export only. Audio effects involved. How can I fix it?

  All the sound quality is as desired in the timeline panel during the first edition. After export, the first clip in voice-over ONLY, now has a dominant white fuzzy noise. If I delete this clip and export, the clip that was the second, but now first, inherits the problem.

  The video below has the original "first music video" removed, to show that the problem persists in the new video for first, which was previously the second and previously sounded very good. Each "phrase" or an "expression" is on his own audio clip, on the same track.

  Also note that the sound quality of the music is great in each. In addition, the quality of the voice is perfectly fine in all the remaining 3 minutes of video.

  From what I can tell, it's like audio effects have not been applied to the item first, after export. I use DeNoiser, dynamics and Volume of the channel in the whole of the audio track of the set (as opposed to each individual clip) voice. When I apply effects to each of the first 3 clips and place them on a separate track, and export, all 3 clips have the problem of white noise.

  I guess that the effects take some time to 'register' and so when effects are applied to the entire track this should happen only once. But just who does not sense that this is a permanent problem or every video ever made by creating using DeNoiser and dynamics would have this problem!

  What Miss me? There must be a way to solve this problem.

  Here is a screenshot:

  

  I use version creative Cloud, Adobe first Pro CC 2015

  I exported with the following parameters:

  H.264

  Format AAC, AAC Codec (tried MPEG and Dolby as well)

  48000 Hz

  Stereo (tried MONO as well)

  High quality

  320 kbps bitrate

  Bitrate priority

  Make maximum use

  
  

  Thank you.
  

  WORKAROUND SOLUTION:

  I used both your advice to a solution that WORKS. Simply, I moved all the audio on this track 5 seconds back and insert an audio clip arbitrary at the beginning of the track. I then exported audio on one. WAV file. I imported the. WAV file in the project and trim the beginning (with the arbitrary clip) back to what is supposed to be the beginning of the audio.

  The arbitrary clip inherited the problem and the remaining clips are great. They reside on a track that has no effects applied, as the. WAV files retain the proper sound quality.

  Also, I've read just after this operation that checking the box "Freeze" can cause the denoiser to apply instantly. I've never tried, but if it works, it's probably a simpler solution.

  Thank you.

• Why is my audio distorted after being in Premiere Pro?

  Hi guys, first post so I am sorry if I did nothing wrong!

  I use Premiere Pro CS6 to modify records of the video game and add comments. I did this for about 6 months and have never had any problems.

  On this a MP4, however, something strange happened. Once I have import the file and put it in a sequence, the audio is messed up. In particular, he drags the video severely and jumps a lot. Here is the video in question after the first export: http://www.youtube.com/watch?v=RyU2l4XVrtw [WARNING: this is a recording of the video game Dead Space 2, which has a lot of animated violence / blood inside.] Also, spend a little in the video to go beyond the pause screen]

  But when I look at the MP4 in windows media player, it's totally fine! This is not the file itself that is the problem.

  Things I've tried:

  -remove the MP4 to the workspace and in re-importing.

  -suppression of the order and putting the MP4 in a new.

  -put the MP4 in a new project in itself.

  -export the sequence to see if the problem resolves after export.

  More information, if it helps:

  -J' I never change the settings of the sequences/projects, so my default sequences on the widescreen 32 kHz. Then when it says "this video is not the sequence settings", I just have him say to change sequence settings to match the settings of the element.

  -J' have other records in the same game, and none of them has this problem.

  -J' I save my xbox 360 with a Happauge PVR2 HD Gaming Edition, which generates a MP4 video and audio on my computer.

  I don't see anything else to add. I really appreciate any help I can get on the situation, because he throws a key in my series if I can't download 10 minutes of play... and I can not re register it exactly. Thank you!

  Clear cache files solved problems of breadraptor with the clip in question.

• Audio can increase/decrease after export

  Hello

  I had put an audioo behind a clip video and reduced the volume of the audio.

  But after export, audio continues to increase n decreases. As, when, in the sound of the video (Audio1) stops for 2-3 seconds, the other audio (Audio2) volume increases, and when the sound of the video (Audio1) increases, the other audio volume (Audio2) decreases.

  Can someone help me?

  Thank you

  It sounds like your playback software is applying some kind of standardization.

• audio problems dissolve after export

  Hello.

  I have a problem with Audio dissolves. If I to export the file, mastermixed strange East and the mixture is not fair. Where I put an audio fade in fading in or out of the music sometimes is double.

  In the first, all sounds fin. When I export in ProRes I get these Audio of the problems. Before the update to 8.1 all went well.

  
  

  Any ideas?

  
  

  Best regards

  
  

  Florian.

  
  

  
  

  OSX 10.8.5

  First CC 20141

  
  

  
  

  I got it. It is the export of the SOUL! If I export the file directly with the first I have no strange audio probs but if I export the sound files or program with Media Encoder 20141 file dissolved it is really bad...

• iMovie ' 09 No Music after Export

  I had this problem before, but it is resolved myself. There was no music after export 720 p, even though we could hear the track in the timeline. It turns out that the volume of Audio setting has been set to 0%. I just set it to 100% then exported again and there was music. Now, I want to export to 1080 p, so I use export using QT. I checked to make sure that the volume level of the audio track was 100%. In the film Sound Settings configuration options are: marker = AAC channels = Stereo LR, rate = 44,100, quality/setting Render = better, the MPEG-4 ACC encoder settings = better, target bitrate = 128. Nothing here is not set that correctly so no audio can be heard after export?

  Check the options for the export to Quicktime, as described in this post:

  iMovie 09/OS X El Capitan: export the project, but not sound

• My Satellite C855 makes a noise very loud

  Hello

  Today I was playing my games, as usual until my laptop from the sounds of buzzing very, very strong. Instantly, I turned off the laptop. Would be a bit and turned back to the left. Once again, very loud noises. I'm afraid to turn it back on now. IM thinking because it is the fan that is where comes the noise, but I can't be sure.

  Any advice on what to do? Someone else had this problem?

  Thank you
  Frozensin

  On this virtual path we cannot say with certainty what the problem is, but I can imagine that the cooling fan is responsible for this.
  From the first moment you turn on your computer laptop cooling fan is active, so I would like to know if you can hear the noise from the first second after the start.

  Is there another type of vibration?

  Of course, it is also interesting to know whether or not your laptop is guaranteed to be valid. If so, I recommend that you contact the nearest Toshiba service provider, explain the situation and ask for help.
  They can order and exchange cool air.

• Cannot use the internal mic. External microphone works but the sound is not very loud.

  Original title: microphone

  My microphone internal hp no longer works.  If I plug an external microphone into the socket, it will work, but the sound is not very loud.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Try to run auto Locksmiths and check.
  Reference: http://support.microsoft.com/gp/hardware_device_problems

  Step 2: Set the default Microphone.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
  d now check if the Microphone is listed there and right-click on it and choose Activate.
  e. Select the Microphone, and then click "set as default"

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Too many audio tracks and effects, which makes export difficult

  I'm trying to export a first draft which takes about 5 minutes. It contains 8 different audio tracks, in addition to having almost all of the clips video related to EI 100. So needless to say that the encoding and export will take some time., after half an hour, even not 1%.

  I guess I was wondering if anyone had any suggestions on ways to improve the speed of export? Apart from the various forms of suggestions already spoken on cards similar as below.

  http://www.premiumbeat.com/blog/14-tips-faster-rendering-effects/

  I'm rationalizing all the audio as much as possible.  It would improve speed significantly to export only the audio and then go back and export with the newly exported single audio track? Or is it all dynamic links on AE that make it so slow?

  And sorry if this is already, was a research-specific item type.

  The render and replace the settings I use.

  

• Problem: video downgrades the quality after exporting

  Hello world!

  IM new and this is my first question on the forum.

  Now, I created 10 succesful videos with Adobe Premiere Pro, editing Gopro videos 1080 p 60 fps.

  My new video, I started using my phone Samsung Galaxy Neo S3 content.

  The problem: after exporting my video, the quality of Gopro videos is like 480 p, but I still want the quality as the original, 1080 p 60 fps.

  What I need to do / how can I solve this problem?

  Relevant information:

  Laptop specs: Windows 10 960 M from NVIDIA, Intel core i7.

  Export format: H.264.

  I tried already rendering in modes: Youtube, Vimeo 1080, Match source 1080HD high flow, I ticked the box "maximum render quality".

  But nothing is done, the quality of the videos Gopro changed as 480 p after the export of the video.

  Please help me.

  Although I have not any more wise, I found a solution on Youtube.

  In my calendar, there is a yellow bar. I had to click "sequence" and then "render outside". Then the bar turned green.

  Then I had to select the export mode: HD 1080 p 29.97 fps.

  Then, as in my first picture, you can see "basic video settings".

  You can scroll down here, and there is also a "fps rate" which was 30 (automatic).

  I had to change at 60 frames per second. It is also recommended to check the box "made to maximum depth" in the audio and video tab.

  The size of the file push double (200%), but the quality is good as it should.

  I want to thank you for your efforts and help.

• Photos of pixilation after export

  Hi, I just noticed that after exporting to an image, the sky seemed very pixelated.

  Although it seems completely smooth in the develop module, even when you zoom in, I seems that the exported photo has low resolution.

  Here are a few testimonials:

  

  

  I hope that you can see what I mean.

  Thank you.

  A quality setting of 60 is aggressive enough, in my opinion. I suggest that you export again with overall quality at 80-85 and see if that solves the problem.