Too many audio tracks and effects, which makes export difficult
I'm trying to export a first draft which takes about 5 minutes. It contains 8 different audio tracks, in addition to having almost all of the clips video related to EI 100. So needless to say that the encoding and export will take some time., after half an hour, even not 1%.
I guess I was wondering if anyone had any suggestions on ways to improve the speed of export? Apart from the various forms of suggestions already spoken on cards similar as below.
http://www.premiumbeat.com/blog/14-tips-faster-rendering-effects/
I'm rationalizing all the audio as much as possible. It would improve speed significantly to export only the audio and then go back and export with the newly exported single audio track? Or is it all dynamic links on AE that make it so slow?
And sorry if this is already, was a research-specific item type.
The render and replace the settings I use.
Tags: Premiere
Similar Questions
-
a section of a Copy imported audio track and stick to the new track
I need to copy part of an imported audio file and create a new track of just what I want.
It seems to try to record audio track 1 on audio track 2 does not work.
3DS3 wrote:
I need to copy part of an imported audio file and create a new track of just what I want.
Click on the region imported to make sure that this option is selected
Drag the slider to the beginning of the section you want and press command + t
Drag the playhead to the end of the section you want and press command + t
-
Hello
I'm watching a video and the Audio Track Info appears on the film. I tried to remove it with the settings, but no results. Y at - it a codec setting or Encoder running which is the cause?Thank you
It's the FFDShow (a third-party codec) which has an OSD "on the screen.
Display"setting. To turn off power, either check the FF... next icon
the windows clock (right-click to select menus)Or in WMP, go to the drop down small playing below, click other
Options of-> DVD-> advanced, and then clear the OSD off -
Hi guys,.
I work with PP CS6, some original sequences (from camera Panasonic) has 4 tracks, but two of them are empty.
It's really annoying delete the two empty traks of each element, and I don't want to have many audio traks in my calendar!
I would like to find a way to import and place in the line of time ONLY TWO AUDIO TRACKS instead of FOUR.
Thanks for the tips
Fabrizio
Select all your clips in the project Panel, right-click and then modify / Audio channels. You can then edit your audio tracks on:
-
I have eight angles of camera and a single audio file only, that I would do in a multicamera source sequence. When I select these files two source multicamera sequences are created, one with two camera angles and the other with six camera angles. I tried to take these files and create an XML PluralEyes so and make a generic mistake to attempt to import the xml file and the import fails.
can give you some background info, version of pp etc are all files of the same format and the same source or mixed?
You can add clips in the sequence manually multicam as a workaround? Right-click in the tray and choose open in the timeline to have access to it. from there, you can try to add the other two clips and even use if necessary synchronization tool.
-
Too many audio channels...
Hello
I need help to understand something.
I have the problem with Canon XF images described in this thread:
http://forums.Adobe.com/thread/1009064?TSTART=0
Gluttony I utility uthe Canon FX to create merged clips in MXF and nvert those XDCAM HD 50 Mbps 50i 4.2.2 vi SOUL in CS5.5
When I import the output file in CS6, I get 8 audio channels, 4 for each L & R. My settings are standard for the preset:
I can't change the audiosettings to export, but maybe I could change something in the importation of the ORGANISM CS6?
I want just a single L & R a track or 1 stereo track, including two L & R.
Thank you.
/ Ulf
Why convert to beginning with the media? Are you aware of what you convert MPEG2 to MPEG2 camera you get when you create the new MXF file? (XDCAM HD = MPEG2)
I would not ever re-compress/convert the already-in-camera-compressed MPEG2 MPEG2 compressed for editing and have then ending up in Let's say DVD MPEG2 or H.264. You lose a generation and I would not lose it by re-encoding in MPEG2 since, IMO, re-encodong MPEG2 MPEG2 are to be avoided. (MPEG2 MPEG2 = quality degrades too) If you want to re - encode images I would use another DNxHD/CineForm/Lagarith codec. (Pick your favorite)
You can use the Canon XF Utility MXF files in CS6. (The MXF files are just copied from the original folder structure, so without re-encoding is done.)
As far as I KNOW, problems with video RIP will disappear using the MXF files that you get from XF Utility. If the tear is always present, close Pr and delete all Cache files. Open Pr and Generating Peak file to finish.
AFAIK 8 audio channels is common in the MXF OP1a according to SMPTE D10.
/ Roger
-
Audio tracks in Windows Movie Maker
I imported a video that plays on one side of the speakers... I want to play mono in both speakers. I can run it in Windows Media Player and selecting th configuration SRS WOW I can get to play in both speakers.
Ultimately, I want to do a clip in movie maker audio plays in both speakers...
Puzzled
SeanHello SDruelinger,
See the link below, there may be a few good troubleshooting steps that you might have missed.
http://www.computing.NET/answers/Windows-XP/weird-problem/138889.html
See you soon
-
Too many anchor points and simplify the mess to the top of the photo
I take a picture and I have a problem - I need a maximum of 2000 anchor points, and I have about 11 k.
Looks like I have a lot of useless points, but when I try to simplify the image gets all messed. Another way to solve this problem?
Here is a part of the image, we see that many of the points do not have to be there...
Lars Jørgen,
Whatever the version, you should be able to:
(1) select a red path and select > same > fill color,.
(2) pathfinder > unit/add to shape area (you may need to press Alt/Option to get simple traces if yes, you will get a warning about it);
(3) separate if you wish.
Who should group all sets of overlapping paths of this color in unique paths, some of which may be composed of paths, with all the unnecessary layers and their Anchor Points removed.
Edit: If you use British English in the first sentence, you can spell it without getting caught by the filter of the nanny.
-
Computer is a 12, xps dell dimension 8800.Tried using disk cleanup and Defrag on the computer, but it could not remove a large number of temporary files. Still can not re - install the avast antivirus that was installed previously, done updates also.
I suggest before you do anything. Type MSCONFIG in run in the start menu. Click the Startup tab, and then tap off everything. Restart the computer.
You can clean your temporary files and other unnecessary files with CCleaner.
http://www.Piriform.com/ccleaner/downloadIf request you something to keep on the first run saved passwords from your browser then press no. On the first screen, click on run cleaner on the bottom right.
If you believe in the detectability of Avast, you can try to install again. Or you can download and install the virus Kaspersky 2011 removal tool.
http://www.Kaspersky.com/antivirus-removal-tool?form=1
And spyware, you can install Spybot Search and destroy.
http://www.safer-networking.org/en/mirrors/index.html
Note: Make sure that you run the update of the tools.
Note #2: Virus removal tool is only intended to get rid of the virus. It is not supposed to be used as an anti-virus official.
-
How to I run a chain of command that has too many escape characters and others
Hello
I know that this is not a forum of PowerShell, but maybe this will eventually help someone else!
I need to run the command following, just that one single line:
curl - vvvv - XPUT - negotiate u: - insecurity - XPUT g h ' "Content-Type: application/json" "d '{\"hosttype\":\"server\', \"address\': [\"127. "
"" "" "" "" [" 0.0.1\"], \"parents\": [], \"tag\ ': [\"demo\'], \"umiworker\": \"gent\", \"notes\": \"this is a test\ ', \"url\ ':------"http://www.tomtom.com------"} " https://someservert/v1/host/test "
However, no matter how many times I put a variable for it, it still does not work.
Can someone help me wrap this thing and run it in PS?
Thank you!
Hello
I had found this triple citing worked, but not for the media. Therefore, I used the Convertto-JSON with quotes to give me the correct output. I does only once because I use the string over and over again using variables instead of some mandatory parameters. NOTE: one line, runs the command that results from what is needed.
« $json = "" "content-Type: application/json" "d" "{'" hosttype' ': '' server' ', '' address' ': ["' 127.0.0.1'"], "' parents'": [], '' tag' ': "' demo'"], '' umiworker' ': '' gent' ', '' notes' ': "' this is a test'", "' url'": ""http://www.tomtom.com"" ""} https://someservert/v1/host/test' | "» ConvertTo-JSON
$json contains the following:
"[" "\"\"Content-Type: application/json\"------"\"\"{\"\"hosttype\"\":\"\"server\"\",\"\"address\"\ d ': [\"\"127.0.0.1\"\" "], \"\"parents\"\ ": [], \"\"tag\"\ ': \"\"demo\"\ ']------,
"{\"umiworker\"\ ': \"\"gent\"\ ', \"\"notes\"\ ': \"\"this is a test\"------", \"\"url\"\ ":------"------"http://www.tomtom.com------"------"} https://someservert/v1/host/test"
Then I put the parameters of command/set. I realize, I could use the $json variable here, maybe, but for me there is no need.
"$cmd = @".
"[' curl.exe - XPUT - H" \"\"Content-Type: application/json\ "------" \"\"{\"\"hosttype\"\":\"\"server\"\",\"\"address\"\ d ': [\"\"127.0.0.1\"\ ""], \"\"parents\"\": [], \"\"tag\"\ ': \"\"demo\"\ ']------,
"{\"umiworker\"\ ': \"\"gent\"\ ', \"\"notes\"\ ': \"\"this is a test\"------", \"\"url\"\ ":------"------"http://www.tomtom.com------"------"} https://someservert/v1/host/test"
"@
Hope this helps someone else!
-
too many audio files... AS3 don't worky
I created this little program to test with. , It works perfectly for audio files or equal to 5 / for loops. As soon as I do more while the sounds stop functioning. Everything else is fine, just no sound. My plan is to have the xml file determin how much sound to create video clips with attached files. I intend to have a ton of video clips and audio files once it is finished. No luck so far
is there a limit to how much sound swf files can reference? Any other ideas why the sounds do not work for me?//load xml var xmlLoader:URLLoader = new URLLoader(); var xmlData:XML = new XML(); var xmlPath:String = "data.xml"; xmlLoader.load(new URLRequest(xmlPath)); trace("loading xml from: " + xmlPath); xmlLoader.addEventListener(Event.COMPLETE, LoadXML); function LoadXML(e:Event):void { trace("xml loading complete"); xmlData = new XML(e.target.data); //load objects buildScroller(); } function buildScroller():void{ var tl:MovieClip=this; for (var i:Number = 0; i < 5; i++){ //create movie clips var container_mc:container = new container(); addChild(container_mc); container_mc.x = 325 * i; // set the number here to the width of the movie clip being repeated //sound info tl["snd"+i] = new Sound(); tl["snd"+i].load(new URLRequest(xmlData.sound.loc[i])); container_mc.snd = tl["snd"+i]; container_mc.addEventListener(MouseEvent.CLICK, playSound, false, 0, true); function playSound(event:MouseEvent):void { event.currentTarget.snd.play(); } } }
Here is the xml file that I use:
<DATA> <object_count>20</object_count> <sound> <loc>fart.mp3</loc> <loc>burp.mp3</loc> <loc>creak128.mp3</loc> <loc>GateOpen.mp3</loc> <loc>bang.mp3</loc> <loc>pop.mp3</loc> <loc>slap.mp3</loc> </sound> </DATA>
>y at - there a limit to how much sound swf files can reference?
N °
First, remove the playSound function of inside the for loop and inside buildScroller. Nested functions are bad programming. In addition, why are you doing tl ["snd" + i] and not only container_mc ["snd" + i]? I don't know why you don't put them only in the container clips themselves if that's how you want to do.
-
Acrobat Reader DC: Too white which makes the difficult document on the eyes.
I just installed Adobe Acrobat Reader DC. It is difficult to read because of all the white people. Is it possible to change the color of the side panels on each side of the displayed document drey very light?
Thanks in advance.
Mike
Hi 8jvu3qfQR,
I understand your frustration, you can provide your comments using this link: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
And, as far as the new design of the Interface DC Acrobat/Reader is concerned, I would ask to visit this link: Reimagining Acrobat: Interview with the Director of the Design Jamie Myrold.
Kind regards
Rahul
-
I did a movie, happy with her. But I want to make a shorter version also. In the first how can duplicate my keep all items, instead of ending up with a sequence of nested main sequence?
Exactly.
Open the existing calendar, CTRL-A, CTRL-C, go to the new timeline, CTRL-V.
-
As my modem router generates a dynamic IP address, my phone is unable to find the HP Photosmart camera, whenever this is necessary.
[Moved from comments]
Since it's your router that is distributes addresses, your PC should not enter the equation, except at the point when you configure the printer after you have solved the problem of DHCP.
-
Timeline between video and audio tracks splitter
The separator between the video and audio tracks on the timeline is very difficult to see. Although it is thicker that other lines of demarcation is not yet clear enough for many people. Y at - it anyway to change the color of the "divider". Does anyone know of a plugin or a workaround may achieve this result? Ideally, we should be able to change the thickness and color so that the timeline between the video and the audio division are visible immediately by glancing at the screen. Can anyone help?
Unfortunately, no thickness and color cannot be changed, and I've never seen a plugin to enable this. Sounds like a feature request for me!
Maybe you are looking for
-
Trackpad and keyboard Macbook Pro retina don't work
I got my Macbook Pro for 3 months with all be good... until this morning, after that start, the keyboard and the trackpad do not work. External elements of USB keyboard/mouse do not work. I checked around and other people seem to have had the same pr
-
How would you apply different calibrations on different channels
I'm looking to apply the calibration data to multiple channels. The calibrations could be made at different times for different channels and could be using different adjustments. I think I have a solution to just apply the calibration on a channel in
-
When the WinXp starting, always getting these 2 errors; (1) loading library can, t find localizer.dll (2) missing LiveNatTrav.dll Try lreloading WinXP SP and also get updates to resolve these 2 error loading but not successful. Any person having solv
-
Problem with vista Media Center shutting down downloading 'TV configuration Option '.
HelloI can't configure my TV tuner card to run in MS Vista Home Premium - Library. Whenever I get to the 'download TV Setup options' screen - after a few minutes of press simply turns off and restarts - giving no error message or anything like that!S
-
Error "Unable to create the setup directory" when I try to install new programs.
I get an error that reads "Setup cannot create directory... error 5: access is denied" when I try to install new programs. I checked my permissions, and there is full control for all three options. I moved my UAC goes up and down without result and t