PE1950 R3 PERC6 / i - Drive replaced and returned at nine but still flashing the model "identify/preparation for withdrawal?
Hello
First post - forgive me.
I have a Dell PowerEdge 1950 of R3 with basket 4 x 2.5 "SAS/SATA connected to a PERC 6/i. 4 x 1 TB SATA WD red disks are mounted configured in a RAID10, and all worked happily for 6 months. A drive has failed, so we jumped out and jumped into a new. Rebuild starts automatically and completed in 208 minutes.
Now all is well again, unless the reader identify / preparation for the distribution of light removal still flashes on the replaced disk. Table health is reported as optimal, all the disks are online, and there is nothing wrong in newspapers PERC.
Is it just a firmware error which may disappear during the next reboot? (We cannot restart this machine right now... don't ask!) but it makes me nervous even if everything works well and the newspapers to report a successful reconstruction and optimal condition.
Thanks for the ideas, you may be able to give!
Lee
Product name: PERC 6 / i integrated
Serial number: 1122334455667788
FW Package Build: 6.3.1 - 0003
Data from MFG.
================
MFG Date: 24/06/08
Transfer date: 24/06/08
Revision number:
Battery FRU: n/a
Version of the image in Flash:
================
FW version: 1.22.32 - 1371
BIOS version: 2.04.00
WebBIOS Version: 1.1 - 46-e_15-Rel
CTRL-R Version: 1.02 - 015 B
Pre-launch CLI version: 01.00 - 022: #% 00005
Boot block version: 1.00.00.01 - 0011
Images pending in Flash
================
None
Our only other option would be to use OpenManage for send omconfig commands. If your version of Linux is capable of running OMSA then you can install it and then run the command:
https://Linux.Dell.com/repo/hardware/
If you can not install OMSA, then you can start on a live CD/DVD of the OMSA:
http://Linux.Dell.com/files/OpenManage-contributions/
Direct OMSA is a CentOS distribution that has OMSA and several other utilities built. It is installable, but you do not want to install it on your current OS so be sure to select the live Webcam or load the option memory at boot.
Once inside of the OMSA live or after installing OMSA in your current operating system, you should be able to run this command to unblink drive:
omconfig action of pdisk storage = unblink controller = pdisk 0 = 0:1:2
You may need to use omreport about what are your ID controller and pdisk. on the pdisk is controller: channel: IDLecteur
Thank you
Tags: Dell Servers
Similar Questions
-
I got a new hard drive in my computer and the old a subscribed. I then had to reinstall Windows XP Pro. In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out. The new shows of unallocated hard disk without a drive letter and has a black bar above it. How do I show my new hard drive that is 1 TB instead of one that was a 250 GB is not yet in my computer.
Hi Reta,
· The drive appears like 250 GB even if it's a terabyte?
· Is the remaining 750Go showing as unallocated disk space?
If this is the case, you can refer to this article on how to use disk management in Windows XP:
How to use disk management to configure dynamic disks in Windows XP
You can follow the directions to extend a Simple Volume so that your 250 GB turns into a single terabyte.
-
I broke mine, but still have the product key and product id #. can I buy a replacement of microsoft cd.
http://support.Microsoft.com/kb/326246
Replace Microsoft software or hardware damaged, defective, or lost.
To request the replacement of hardware or software, contact the Microsoft Supplemental Parts team at the appropriate number provided in the section "contact information". You must be in possession of the product (if it is damaged or defective) and be able to provide proof of purchase. Service representative customer will notify you of any costs of replacement or shipping and handling fees that may be charged. If a product is no longer under warranty, the replacement item may no longer be available.
-
If I install a new mother/Hard Card Drive in my PC, will be Windows still recognize the PC & stay enabled? Can I clone the existing drive I use or make a new installation (preferred). Both old & news readers are SSD. The two motherboards are made by Asus. If I can't get Windows to activate - what should I do about it? Thank you in advance for your help!
You may need to reactivate by phone, OEM licenses are not really intended to be transferred from the original motherboard it came with that.
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
I have DW CS4 and want to update but don't want a monthly fee for CC. What are my options?
There is no way to upgrade to CS4 versions.
If you do not want to join the Cloud then your only remaining option is to buy a new version full DW cs6.
Just remember that CS6 is replaced software 3 year that isn't old is no longer being updated.
-
I bought and downloaded an album, but one of the songs is not in my music. Why?
I am running Yosemite (10.10.5) and iTunes 12.3.0.44 (with match) on an iMac. I bought and downloaded an album, but one of the songs is not available in my music, so I can't add it to any playlists. I've never had this happen before. Any ideas on what is the cause?
Have you tried re - download the album?
-
original title: my desktop icons are changed and does not directly but opening in the location of the original file. So how do you restore originally propertities of the desktop icons
Mr President, due to changes attributed to the icons of the office by my children, my desktop icons are changed and does not directly open, but they are open in the location of the original file. So how do you restore originally propertities of the desktop icons
Thank you.Hello
I suggest you follow the steps mentioned below.
Method 1: Run the Fix - it.
Follow the link below and run the Fix - it and check if it helps.
http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
Method 2: Run a sfc scan.
Follow the link below and check the resulting errors.
http://support.Microsoft.com/kb/929833
Method 3: Perform a system restore.
Follow the link below and perform a restore of the system to a point before, when the system was working fine.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
It will be useful.
-
Download not add-ons for Muse. Easy to buy and all seems good, but nothing in the downloads folder. Adobe "Obtained" Watch website I have Mac, Muse CC 2015, C Clowd, Cync files is on. Help?
You should contact the provider of the Add on in this case.
-
When I tried the lightroom cc2015 update I get an update of the failure U44M2P7 error message. I tried to rename the file update and a new attempt and also update manually but still the same error. I use a mac with os x El Capitan version 10.11.3 any suggestions would be greatly appreciated.
U44... Update error http://forums.adobe.com/thread/1289956 can help
-
The photoshop gave an error uninstalled my Macbook and tried to reinstall, but it seems the cod error 205, how can I solve this problem?
Help creating cloud / cloud creative applications download error
http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html
-
My Lightroom has lost the connection to most of my photos, records and collections. They are still on the computer. It happened, while moving my laptop when it was running. The mouse is moved and it might have changed the configuration. How can I make my Lightroom works properly again?
I use Lightroom 6.4 on a Pc with Windows 10.
Has disappeared? Try file-> open the new item, and then select each illustrated catalog until you find the catalog with your photos.
If this does not work, please post a screenshot of the problem.
-
I transferred my Lightroom 5.7.1 my cell phone to my PC. I put in the serial number, you press "next" and another box came up saying that the updated code was for and upgraded version and I should put in the old version the serial number - this that I can't find
you will need to this previous version number and serial number.
If you purchased the previous version of adobe or registered with adobe, check your account: ID Adobe
in otherwise, find the serial number of your product Adobe quickly
-
I try to install LR CC in the clouds of Creativ (10 times) on Mac, and as I propose to iCloud and you logout log in again. The start icon poster for a short time an it's all... need an uninstall of the old LR? Or what to do. Daniel Berne
Thank you very much for your help. step by step, I did excatly how you propose. but the success of the moment. When I startet I wish the application to the front of the CC 2015 to up and down... a little more time... and I waited with passion but nothing else happens. my contract with adope is ok and PS the LR old books.
Best regards
Daniel
Sorry for my English
-
Help! I created a website in Muse. But he resumed the model in the Tablet and phone version?
I deleted the version Tablet and phone. -J' then looked on my devices after refreshing the browser / history of compensation. He is always picking the layout of the model and not all my changes.
That is to say: don't default to the version of office.I also tried to add the alternative layouts again, asking him to copy from the desktop version. Still no luck.
I downloaded this on www.yourtestsite.co.za
I have the same problem with another site, I did for www.rockerdistributors.co.za
Hello
I replied to your other thread, Help! I created a website in Muse. But he resumed the model in the Tablet and phone version?
-
Portege R700-1hd: Questions about HARD drive replacement and passwords
I have a 1hd R700 with 320 GB HARD drive in stock. I want to upgrade it to 500 GB. This update should be pretty simple, cloning from the old to the new.
However, I was wondering about the HARD drive password / finger.
My HARD drive it configured to use a fingerprint/password on boot - I guess that it is involved in the BIOS and the drive itself, but I'm not exactly sure how.
I think the HARD drive itself is locked, it is not a Windows or BIOS password.If I change the HARD drive will still be able to use startup disk HARD password/fingerprint? Are there requirements for material of HARD drive I need to consider before buying new HARD drive? As should be a specific type of HARD drive to work with password disk HARD/fingerprint digital?
Thank you
Hi bullerd,
The HARD drive password is stored on the HARD drive so when you replace the HARD drive you must set a new password of HDD in BIOS. The password is not stored in the BIOS. In addition fingerprints can also be stored on the HARD drive or let s say fingerprint digital software but all of the operating system must be installed after Exchange HARD drive so it s new problem.
So the two passwords you mentioned are stored on the HARD drive so it s no problem to swap the HARD drive. :)
Maybe you are looking for
-
My contacts won't load not in hotmail
I've never had this problem before. Last week, my contacts stopped loading when I start typing in the "to:" window to send a new email in hotmail. When I click on 'for' the circle turns at the top of the window. When I click on contacts, it will not
-
buy the update or complete, if vista problems
It's about whether I should buy windows 7 updated version or full. dv4-1275mx has had problems for many months now with slow speeds, freezes, crashes, locks etc.. (note I had to reinstall the computer to its factory State a couple of times, and the
-
convert HARD drive on HP 15-ay-011nr
Hello I bought my computer with win10 installed but want to replace/upgrade to SSD HARD drive will have best perfromance I can do with cloning SW? or need to somehow get the iso file to win10 and run the clean install? any recommendations? Thank you
-
After effects OpenGL error on a Satellite A200 - 1 M 7
I am engaged in the development of video. Earlier, I worked on an old computer (256RAM, 1.7 Mhz, 64 MB of video).I work in the program Adobe After Effect, but today to work on Toshiba satellite A200 - 1 m 7(It's very powerful computer Core 2 duo 1.8
-
Photos does support Sony A7S ii Photos?
I am able to import Sony A7S ii photos and see the photos, but whenever I click on the thumbnail to view the picture in full resolution, I see is exclamation point error. Thanks for your help.