Peel Acer more: Led notifcation

Similar Questions

• Zest of Acer more: is it Double tap to wake the screen system?

  Hello

  Is there double tap on the Acer more zest to Wake up then screen or just drag it down to one screen (such as Acer Z630) to wake up?

  Sory for my bad English

  No Double don't tap on Acer more zest, just slide down.

• Hinge of Acer E5 LED

  Wondering if anyone can tell me the spare parts store to order a hinge RH LED to my Acer E5-571p-52qk?   If there is an identical piece of another model - which also works.   Thank you!!!

  Acer manufacturer on the left and right hinges LCD SUPPORT R & L 33.ML9N2.004

  

  New

  http://www.eBay.com/ITM/new-Acer-Aspire-E1-571-E5-511-E5-521-E5-531-E5-551-E5-571-v3-572-LCD-hinge-S...

• Help, readynas start more, Led 1 and 3 are on led power is off

  Hi all

  A cry with the Netherlands.
  This afternoon, I heard another sound, then the sound, I used to hear in my basement.

  Is the fan of my nas who was at full speed.

  Only the 1 and 3 LEDs are on, no power led.

  I already found the legend of LED and it seems I have a problem of bootloader.

  A simple reboot did nothing.

  I already tried the RAIDiator 4.1 USB recovery tool which does not work, it is not reading the USB at all (I tried a few, also old usb keys)

  It may seem a little crazy, but if I buy a new (or second hand) model and set the raid parameters the same (1 have 4 WD-Red 1 TB in X-RAID2 framework)

  Can I still access data on drives?

  The date on the disks is very valuable, it contains many pictures of my father, who unfortunately died 11 year at the age of 68.

  So please help and advise.

  Thank you!

  Maarten

  Problem solved!

  A friend of mine knew someone who has exactly the same sin and the firmware because my defective nas has.

  His sin has also 4 disks in X-RAID mode.

  He made a backup of all data, and then we exchanged its discs for my drive.

  The nas did a normal start and I could see my data (YES!)

  I made a backup of my data and installed my records in the nas, I bought on e - bay.

  Of course this again not me so I bought some cloud storage directly.

  Thanks for supporting me.

  Best regards, Maarten

• Problem with Acer C110 LED spotlight.

  Hi all,

  Please, can I get help to make the my projector Acer C110, working under Windows 8 on a laptop Acer V3.
  Thanks a lot for help.
  Hoping to hear from someone soon.

  Hi SBala.

  Please find below my mil:

  E-mail address is removed from the privacy *.

  Once again thank you for helping.

  AMED.

  UPDATE:

  New version is available as a paid app for just 20USD

  Goto http://balas.asia and click on order.

  New features include 3d games in our projector, multi threaded application, zero lag, effective use of memory, support full resolution HD video and many others.

  It is a complete alternative for Acer displaypal.

  This software runs under windows 7, windows 8 and above.

  Thank you
  Bala

  -----------------------------------------

  Dear all, I took out the software Acer c110 projector software for windows 8 in sourceforge.

  Please go to

  https://sourceforge.NET/projects/acerc110windows8bybala

  Thank you

  Bala

  THIS SOFTWARE IS PROVIDED AS IS WITHOUT ANY WARRANTY. YOU MAY NOT DISTRIBUTE THE APPLICATION BY YOURSELF IN YOUR OR ALL WEBSITES. INSTEAD YOU CAN GIVE THE LINK TO THIS WEB SITE. https://sourceforge.NET/projects/acerc110windows8bybala/

  Install the driver software:

  1. download http://zadig.akeo.ie/ zadig

  2. connect your projector

  3. open "zadig.exe".

  4 goto "Options" and then click "show all devices".

  5. Select your device (usb Device with vid:1DE1 & Pid:1101)

  6. Select winusb (V6.x.xxxxx.xxxxx) as a pilot, then click on install driver

  Application Switcher: Projector of the cdrom mode projector mode switches.

  1. now run "switcher.exe.

  2. the projector will switch to projector mode

  : Projector application at hand

  1 repeat the installation driver software steps 4-6

  This time select USB with vid:1DE1 & Pid:C101

  2. now, open the application "projector.exe".

  3. from combobox Displaymode, select "Desktop" to show the desktop in the spotlight

  Optional: You can reduce the screen resolution of your computer to improve the performance and the speed of the application.

  Bala

• Acer aspire led power cell v3 shows that when I turned it on

  So, I have been using this laptop for quite some time now and it was just another day when I turned the laptop on it only shows power light and nothing else.

  Hardrive not spining
  Fan not spining
  Dosent screen shows nothing
  But im surprised when I plug a port ethernet, the light flashes

  Loptop
  CTEA aspire v3-571-6769
  6 GB memory
  hard disk of 500 ithink space
  Intel core i3

  Itried solutions
  Running on battery
  Running on plug only
  The two did not anyththing
  Remove and reset the bios by removing the battery cmos for 30 minutes
  Press and hold the power button to reset the power
  Check all plugs on the motherboard
  Start the laptop with/without ram and with or without a hard drive.
  What else is the problem?

  Rumerobnamia,

  The only thing left is the motherboard itself that could be the problem from the looks of it.

• Acer X223W 22 '' LCD TFT

  I can't get the Acer X223W LED monitor to get past the Win 7 driver to accept it under 7 Ultimate? Whats up I ran a program that just could ' t get me on line.

  Please I want to make great videos befor I'll die here.

  Much Mahalo

  Dennis / disabled veteran of the Viet Nam Era.

  Acer does not have drivers for Windows 7, but Vista drivers might work.  You can also try to use Windows Update to get drivers - it is located in the start menu.

  Drivers for screens LCD X223W
  http://support.Acer-euro.com/drivers/monitor/X223W.html

  MS Windows drivers

  Display USB E4.3 X223W driver

  X223W WinXP/Vista display driver

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  More information on how to make older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• looking to buy Acer Aspire V3-371, Intel® Core i3-4030U-bios is virtulizartion - please help

  This model is not bios of Virtualization options - but see two updates of bios in acer as well-cpu with this feture

  they give option if the bios updated? and is it removed the warranty of the company

  I will not buy this if theres no Virtualization please don't help me someone who knows

  Thank you

  Brand / model

  Acer Aspire V3 - 371

  Processor

  Architecture of Intel 64 support processor (3 MB of L3 cache, 1.80 GHz) Intel® Core i3-4030U, Intel® Smart Cache

  System memory

  Support for dual-channel SDRAM DDR3L: 4 GB memory of the DDR3L system, expandable to 16 GB using two soDIMM modules

  Storage subsystem

  Hard drive: 500 GB

  Display

  13.3 "HD resolution of 1366 x 768, brightness Acer ComfyViewTM LED backlit TFT LCD

  Video memory

  Intel® HD Graphics 4400, supporting OpenGL® 4.2, OpenCLTM 1.2, Microsoft® DirectX® 11.1

  N ° upgrade BIOS will not add a virtualization option.

• Can you help me with a configuration of dual monitor DVI?

  I went through a few weeks of effort with it and seeking a

  final solution... I have an i7 Mini - 2012 model.  Two identical

  Acer S241HL LED monitors.  I need the same video display DVI on both

  screens.  A single monitor, close proximity to the Mini... about 1-2 feet...

  The other over a distance of 25 feet.

  It worked with a HDMI > DVI adapter to a Tripp Lite DVI splitter

  For more than a year... then became intermittent.  I tried a different separator,

  an Auralek - it worked fine about a week and then stopped.  Looks like

  dispatchers to stop sending any signal wake-up is necessary after a

  period of time where the computer or monitors have been turned off and then

  No video signal on the power of return.    Have tested all cables,

  recycled, reset everything that can be reset etc... with Mini and

  monitors...  Have had the same problem using Thunderbolt > DVI adapter.

  BTW, this works ok using a MiniDisplayPort > splitter VGA, but I want to

  Resolution DVI.

  Bottom line, is there a known reliable separator or any other approach

  It is relatively bulletproof to achieve...?  I found a

  another device by Sewell who is basically a different dispatcher amplified-

  who says someone worked "better" than the Tripp Lite...

  It appears on diagnostic tests, there is nothing wrong with the

  On the Mini HDMI port. Both monitors work fine individually

  When it is connected directly to the port DVI btw.

  I hope someone can help.

  Thank you!

  Mike

  VGA must have resolutions more than DVI, what ground had VGA?

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• HP Pavilion 1209sz g6: laptop does not turn on

  Hello

  My HP Pavilion g6-1209sz lights. When I press the power button, this will happen:

  -I can hear the computer start, but the fan won't move;

  -l' screen stays black

  -the led power button on and near the power adapter is turned on (white), the led on the wireless button is on (red)

  - about locking cap button led flashes 3 times.

  This has happened before:

  Yesterday, that the computer does not light at all, nothing at all, except that white led near the power adapter is on.

  After that I disassambled computer, thinking he was dead, and at least I'll have fun. I removed the motherboard in order to clean the fan, which was completely clogged with dust. Now, I assembled the computer again and it seems in better shape than yesterday, because at least I can hear it lights and more LEDs are on. So I have little hope that he is not yet dead.

  Maybe I made a mistake when I assembled the computer. I read http://support.hp.com/us-en/document/c01732674 that the number of flashes on the cap lock button can help to know what hardware has a problem here.

  Thank you in advance if anyone can help me.

  Flash123

  Hello

  I found the answer to my problem here: http://support.hp.com/us-en/product/hp-pavilion-g6-1200-notebook-pc-series/5145704/document/c01732674/

  This page lists the meaning the number of flashes on the cap lock button. The 3 flashes, I had meant that the RAM had a problem. He simply has not been installed correctly.

  After that, I was able to start the computer, but he has immediately told me that the fan was not working properly and that it would be closed within 15 seconds. Next step is to check the fan, maybe that I also made a mistake after you have cleaned the fan.

• Aspire V 17 nitro touchpad issue

  So I just bought this laptop, it has like 3 days. And the touchpad is just terrible, isn't it? So many problems with that, I updated my drivers but it doesn't change anything at all.

  I have questions concern the mouse goes to random position for idk why, Touchpad recognizes touch as a right-click crashes from time to time, on the left click and so and so and so and so...

  The only way to fix things TEMPORARILY is to disable the touchpad with FN + F7 and turn it on again... What is the official way to work with this pc?

  This is such a great game laptot and nothing else but this touchpad...

  Does anyone have a solution that works permamnently, not for five minutes?

  Nothing doesn't work bro, and Yes contacting suport, answering every time on all the forums. What will suport you think? Reinstall windows, delete everything and give it back to you with the same questions. Thank you very much.

  Just search for the same problem on the internet, it gives you tons of people having the same problems.  will not buy any substance acer more pure * beep * and money wasters.

• WAG300N: could not start correctly after power failure

  Hello

  After AC power interruption, I tried to turn on my router Linksys WAG300N, but he won't start properly. I will describe what it looks like and what I've tried:

  I push the power button / stop, all 4 Ethernet LED simultaneous light for about a second, (if there is LAN cable connected, one or more led lights permanently) and power the LED will blink twice at normal speed. After that, both voltage and wireless, led simultaneously for about 1-2 seconds, start power LED flashes quickly, after seconds wireless LED stop light, wireless flash LED again and stop two LEDs for lighting. Second later power LED flashes two times normal speed and the process begins again but without flashing of the LED Ethernet (loop).

  I tried to download the firmware using TFTP, but it does not work. Router did not respond to a ping. After many tests, I noticed that the only time where I can ping router is during normal those two blinks of the power led. I've got 11 times waiting and the response of 1 or 2<1ms, 11="" timeouts,="" 1="" -="" 2="" responses etc... (response="" waiting="" time="" for="" a="" ping="">

  I've tried a few ways to reset the router (based on this forum). It does not help, sometimes after the reset I power the router problems or flashing process stops after a few loops (only one Ethernet LED lightning or router turns off). At the end of a day all supports them to the previous behavior of closure with power LED and wireless LED blinking.

  In the end, I tried utility upgrade Sercomm 2.07 mentioned in this topic: http://forums.linksys.com/linksys/board/message?board.id=DSL&thread.id=52

  This software detects only router after reset, when the router is in unknown mode, Internet and power LED flashes alternately.

  Software detects the device as MAC address and visualize correctly the version of firmware loaded into memory. Looks like it works and flashing memory. While flashing memory, power LED, LED Internet and Ethernet LED flashing at the same time very fast. I tried all versions of firmware available, but it does not help, I still have the same behave after flash.

  I think it could be a problem with the bootloader, maybe that part of the memory is broken, but I did not how to fix it. I found information on the JTAG interface, but I don't know if it will work for router WAG300N and where I can find the appropriate file with bootloader.

  Maybe someone can help and give me the idea what should I / check. Theoretically, I should have left 1 year warranty, but I lost the proof of purchase required for the RMA process. I can't find the place in Poland where professionals can help me, so I think that should do it myself with your help

  I think that's the problem with the power adapter... You should try a different power of the specification of the same card...

• How is the ACER Aspire XC-705 has no LED indicator?

  Well, it's all in the subject; How is desktop ACER Aspire XC-705 has no LED indicator? As for a HD and DVD player.

  It is the first computer DT I've owned since 1993 that doesn't. I'd be willing to bet that computers laptops/notebooks do. Is the rest of the industry is wrong to put on their desktop computers, PC or... Well, I'm with them anyway.

  Of course, it's a novel concept, but it would be a car without a speedometer or a camera without a viewfinder. As it is, I have to rely on my hearing to know if there is activity on the hard drive or not, Ditto the DVD player.

  See what I mean jelly bean?

                      

  Yes, your PC is not a LED HDD/DVD, but probably the motherboard support it.

  If you open the case, you will notice a connector near the heatsync chipset, it has 4 wires connectors has a few empty holes, I think it can be connected to some of the lights but I can find no reference at the present time.

• Acer Aspire S7-392 lights flashing power led

  Yesterday when I tried turing my S7 on it would not turn. Power led kept flashing. so I plugged it to think of HQ, there lack of battery, but the result was the same.

  After reading some post online I reset the battery, he turned. I quickly took my working backup because it could happen again. And today it turned out I was right.

  I've tried so far things:

  • reset the battery from the back.
  • removing the battery from the inside and with the power for 30 seconds
  • FN + f12. does not not, as soon as the key is pressed, it begins to blinkg
  • read a few post on flashing the bios coundn't find the right way for s7-392 so tried of s7 - 391. bios donwloaded. It extracts. copied to USB. held fn + ESC and then turn it on. did not work as soon as you press power button / stop led continues to Flash

  I tried it didn't work. I decided its time I put it in the trash. The thing has been in and out of the repair shop, over 2 years. I never had cell phone that easily beat without fault of the user.

  Did you know that the first time, I bought this 3 weeks speakers stopped working. After 2 months, every time I turn it on it disk check-up. and all died within 6 months. It was under warranty so he sent to acer repair workshop. He come back every thing worked initially. but in the first enclosure week has stopped working again with 1 usb port. within two years, I've had it already spent enough for a new ultrabook.

  Even though my friends said acer is not a well, the thing seemed so nice, so bought some anyway. I learned my lesson will never buy an acer product.