Aspire V 17 nitro touchpad issue

Similar Questions

• Aspire V 17 Nitro - function keys not working do not after Windows 7 installation

  I just recently picked up an Aspire V 17 Nitro and immediately installed Windows 7 above. Everything works great so far but I noticed that the function keys do not work. Those where you hold down the "Fn" key and then do things like adjust volume.

  Someone knows how to fix this?

  Thank you.

  I thought about it.

  I had to install the program "Launch Manager" from Acer.

  And I had to go back a few versions to find one that worked with Windows 7.

• My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera

  My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera. And also on Device Manager I do not find the Image device where I should find the camera

  Hello...

  If you have already tried the factory reset, it might be a hardware problem with the webcam. In this case, you will have to send the laptop for repair.

• Aspire E 15 touchpad issue

  Other issues of touchpad were on different models, so I made another thread for my model specifically.

  E5-571-7776

  He is lagging badly. It follows a path, but it shakes in this way and has been like this for the past few days. I use a usb mouse in order to mitigate the problem, but I can't always use it at school. Help, please? I think I update the driver before, but I'll go ahead and try again. I'll edit this message if I don't get fixed. If this isn't the case, assume that I still have the issue.

  Hello

  Follow the steps here, which should provide a temporary solution. http://Acer.custhelp.com/app/answers/detail/A_ID/35209

• Satellite L500 case, scratches and touchpad issue

  I have just a few problems with my L500.

  I got it for 2 months and I'm pedantic on this issue to the point that it is to be always in a bag when not used or on a desk when he is and I even clean it with a brush.

  Despite all this, looks like I got it for years. There are missing pieces of the case and scratches all over the thing and the small rubber feet or just the other side of the webcam takes off and fall thereafter.

  The mouse pad is also strange things, regardless of the settings I chose for her. Sometimes it won't work on the left side of the screen and will flick off to the right and I have to reboot the machine to make it work properly again or I have to tap several times so that he could do nothing at all or it scrolls crazily and I can't stop.

  Basically, it is under warranty, I am impressed by the fact that he is obviously made of poor quality material and is either damaged when I am taking care of him and I wonder if it is what I can do about it.

  I think abnormal wear is perhaps the case here.

  See you soon

  > Nevertheless, looks like I got it for years. There are missing pieces of the case and scratches all over the thing and the small rubber feet or just the other side of the webcam takes off and fall thereafter.

  Strange hmm what to say my L505 is a few months, but it looks like to buy on the first day.
  No scratch, nothing! Of course, I m safe with this laptop and use a microfibre cloth to clean it. I put t use on the road and I think that this is the reason why it's so pretty plastic covers looks like other common blankets used in other portable models so don t see big differences.

  > The mousepad also does strange things, regardless of the settings I chose for her. Sometimes it won't work on the left side of the screen and will flick off to the right and I have to reboot the machine to make it work properly again or I have to tap several times so that he could do nothing at all or it scrolls crazily and I can't stop.

  With regard to the touchpad.
  I think you should take a look in touchpad, configuration settings: Control Panel-> mouse-> device-> settings (or properties) settings
  Here, you can configure the parameters provided by the Synaptics driver.
  Notes; Touchpad uses two drivers: Alps and Synaptics
  If you have any questions, then an update could be recommended.

• Z580 touchpad issues

  Hello

  So I bought a Z580 Ideapad a few days and I'm in love except for one thing that is bugging me. The touchpad. He feels not like he has any flow or as if I have full control. It is scrolled randomly and I don't know even how I do, don't move the cursor exactly where I want it to go, sometimes rest unresponive for a second about and then sometimes jumps around, and I also noticed that I can't move the cursor, if I am pressing a button.

  I read about some problems with the touchpad Snaptics but they're going to works not at all, to compatibility issues regarding Windows 8 and gestures. I also met some driver downloads, but they'll be nothing, or the cautious side of me is not trust in them because they are never seen.

  In addition, I read 8 Win (which is what I use) is new, so these problems could be fixed in time.

  It frustrates me that I love the laptop but the touchpad drives me crazy! I'm really worried about the gestures for zooming, rotating, or whatever, I want just the basic touchpad to actually work. It is their solution, or is it how the touchpad is?

  Thank you!

  Try this driver
  http://driverdl.Lenovo.com.CN/Lenovo/DriverFilesUploadFloder/35835/Win8_TouchPad.exe

• Acer aspire v 15 nitro VN7 - 591 G-74LK wifi problem low signal...

  Please help me how to fix wifi

  My laptop: Acer aspire v 15 black nitro Edition VN7 - 591 G-74LK

  During my weak signal wifi, delays in waiting, slow speeds, disassembly of connection, etc.

  Please how to fix.

  I installed patch full
  And my version of the 10.0.0.299 wireless driver

  The very low signal strength...

• Aspire V3 keyboard and wireless issues

  Hello

  I have an Aspire V3 - 771 G-9809, that is a little more than two years.

  Some keys on the keyboard at the top left do not work, such as the A, Q, 1 and Esc.  I called Aspire support before the expiry of the period for free help and they gave instructions to resolve this problem, something to do with the accumulation of static electricity upward, the included patch remove the battery and enter the BIOS to boot, but I do not now remember what the steps were.  Does anyone else have this same issue or know the steps to fix?

  In addition, for a while now the wireless is not connected and is low and slow when connected.  I don't think that the problem is with my router or my network as all other computers and devices in the end work from home.  I have to constantly disconnect, then reconnect the network connection to get the internet to work.  For any help or suggestion would be greatly appreciated.

  Thank you.

  The solution for static buildup is to remove the battery and cord power, press and hold power for 30 seconds, plug the power cord and start. There is nothing in the Bios that will fix the keyboard. Your keyboard could be dirt in these keys or it becomes defective and must be replaced.

  On the wireless, if you have the Atheros AR5BWB222, many laptops have problems with this card. You can try to reinstall the latest version of the driver for it, but you must uninstall all older drivers.

  As much as it's been around for two years, is it possible, he got hit pretty hard one of the antennas is out.

  If yours has a t shaped door on the bottom, you can remove it to get to the Wifi card.

  Many people are replacing the card.

• Touchpad issues?

  Recently, I have problems with the touchpad. I can't get the pointer arrow to go where I want it. When I do it, it moves all around and I can see it shake on the screen. I can't scroll upwards or downwards with my two fingers. When I try this, I'm split applications that are open. Any suggestions?

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

  Try a SMC reset. Article covers when necessary, but this will not affect anything.

  Reset the SMC

• Touchpad issues - error 0 x 00000103 on the R of Satellite series

  I recently had to recover my laptop from scratch using CF provided by Toshiba. However, after upgrading all Microsoft patches my touchpad has stopped working. It is not the problem of Fn + F9.

  The Alps driver is missing, also the application to manage the touchpad also does not appear. I tried to install the patch to the Alps from the CD but also downloaded the driver, but it fails with the error code 0 x 00000103 and then failed init 0 x 0000000.

  Can someone kindly help me on how to fix it?

  Thank you
  KK

  Hmmm... have you checked the list of all available updates? You should do this before the start of the update (auto update to disable).

  I noticed that it is offered for entry Synaptics Synaptics PS/2 Port TouchPad option but this update is defined as option so must not be installed and you should only use the Toshiba driver installed.

  What to do now? Try to roll back OS to an earlier time using System Restore tool. Sorry, but now, it won't be easy to do much. If nothing helps to install the new OS by using recovery image but then disable automatic updates and do it manually. Always consult the list of available updates and to avoid updates for hardware components. I do the same and everything works fine.

• Acer Aspire E 11: my touchpad cursor continues

  My cursor touchpad freezes after 20 minutes of use. I have to stop and wait for about 20 minutes before restarting and 9 times out of 10 it will work again manually. I'm running on Windows 10.

  ann1955

  Go to Acer

  http://us.Acer.com/AC/en/us/content/home

• Tecra A5: touchpad issues only when the AC adapter plugged

  Hello

  I have a very strange pb with my tecra a5: when I plug in the power supply, my touchpad behaves oddly (latency), as soon as I unplug the power touchpad is ok.

  I tried many things (including total reinstall + change the touchpad), the pb is still there.

  An idea or a similar experience?

  Hello

  Recommend to test this with the new adapter recommended by Toshiba.
  I read here in the forum on a similar topic that could be solved by the new adapter.

• Touchpad issues: Satellite A300-1EY

  Hello!
  I recently bought Toshiba Satellite A300-1EY, a thin laptop!
  I have a question about the touchpad...
  While working with her button of the mouse on you're get screen one part grey scroll
  Like this: http://i35.tinypic.com/2h38nt0.jpg

  I like to work whit photoshop and this scrolling thing becomes very enoying!
  * My question is: is there a way to turn it off? *

  Cordially Josien
  (Netherlands)

  Of course you can turn it off. The option is called virtual scrolling. Go to the advanced settings of the mouse and disable it.

• Satellite Pro L300 - keyboard and touchpad issues

  Hello

  I just baught my GF a PC Toshiba laptop refurbed for his 21st birthday from a reliable source, it's a Satellite Pro L300.

  I started it until all the setup stuff, me there only to find that the keyboard and the touchpad work not AT ALL.
  The keyboard caps lock key is not even lights up when I press it.
  I downloaded all the latest drivers for EVERYTHING Inc. the touchpad, it makes no difference.

  I'm quickly running out of ideas and come to accept the fact that the keyboard and the touchpad is maybe defective and therefore evil must give my GF a defective laptop for Denise 21st, not happy :(

  Any1 have any ideas?

  Thanks :)

  Edit: OK, OK very strange, after that I sent this message, I tried the keyboard once more and it works fine?
  Could this be something 2 do with the download of the VFR package?

  The touchpad is always tired, even when I try the fn + f9 combo?

  2nd edition: Ok now the keyboard stopped working again!

  ON EARTH!

  Hello

  Looks like a keyboard problem. who knows why it doesn t work looks like something would be wrong
  I recommend you visit your dealer and replacement request
  Otherwise, you may contact the ASP in your country for a fix

  I think it's everything you could do

  Good luck

• Satellite A300-1AL - keyboard and touchpad issues after change of OS

  Hello

  I'm looking for suggestions or ideas how to deal with the problem of keyboard and the touchpad, which occurred just after I installed the new operating system. I changed from Windows Vista to Windows 7 and my keyboard and touchpad become inactive after a few minutes of starting the system. It is not serious if I write something or not, the unit works for a short time, then turn off automatically. I tried to find updates the driver but failed to come through what might be the solution. It is difficult to work with the screen keyboard so I hope that you will be able to help me.

  Thank you in advance,
  perkit

  I have Satellite A300-1LI and I installed clean Win7 32-bit using the Microsoft installation disc and all devices are working properly including the keyboard and the touchpad.

  Have you installed Win7 upgrade or clean the Win7 version?
  Have you used Microsoft installation CD?
  In General, keyboard and touchpad must work without any additional driver.