Pending ASO cache limit

Similar Questions

• Distributed cache limit size

  Hello

  I want to create a cache distributed with node 2.

  Each node can have maximum of 500 entries.

  Total entries in the two set of node cache should not exceed more than 1000.

  If the user tries to put more than 1000 items in the cache, then a few old entries from the cache (LRU, LFU) should be removed from the cache and new organizations must be added.

  Can you please help me with the schema for the above scenario.

  Your help will be appreciated.

  Thank you and best regards,

  Viral Gala

  I think that you already had a response to this on the Support of coherence OTN forum: size limit of the distributed cache

• increase the 'size of the cache pending' of our cube ASO to capture whole database in memory?

  Happy new year everyone,

  We want to take full advantage of our 54 GB of free memory on our server Exalytics X 4.

  From this site, I read more in anticipation of the ASO cache size will reduce the disk i/o.

  The default / .dat file size of data from our database of the ASO is 9.9 GB with more 100 million cells entry level.

  We should increase the 'size of the cache in waiting"our ASO to 9.9 GB cube so that the entire .dat will be cached?

  Thank you.

  ===============

  PS. Here's what I found in ASO Tuning white paper, which seems to recommend 512 MB or 1 GB.

  ASO cache size has an effect on the performance of loading data. For

  small databases with cells of entry 2 million or less, the default

  ASO cache size to 32 MB is sufficient. For a larger database

  with 20 million cells, 64 or 128 MB of cache is more appropriate.

  A database with 1 billion cells or more, the size of the cache can

  be placed as high as 512 MB or 1 GB if memory permits.

  Put all of the memory base looks really cool, but my experience is that in most cases it is not necessary. In my experience, the benefit of the ASO cache decreases rapidly. Here's an example I wrote about running aggregations:

  http://Essbase-day.blogspot.com/2015/09/calcparallel-with-ASO.html

• 4012 [1211140]: exceeded the limit for connection cache - how can I solve this problem

  "" "QUOTE-2016-11-18 09:40:48.680000 UTC - 4012 [1211140]: exceeded the limit for connection cache: imap://[email protected]@imap/ writes" rel="nofollow">-mail.outlook.com:993/select>/Drafts 09:40:48.680000 2016-11-18 UTC - 4012 [1211140]: queues url: imap://[email protected]@imap/ writes "rel="nofollow">-mail.outlook.com:993/select>/Drafts 2016-11-18 09:40:48.680000 UTC - 4012 [1211140]: seen play queue url: imap://[email protected]@imap/ writes" rel="nofollow">-mail.outlook.com:993/select>/Drafts 2016-11-18 09:40:48.680000 UTC - 4012 [1211140] ': creating instance of Protocol to play queue url: imap://[email protected]@imap/ writes "rel="nofollow">-mail.outlook.com:993/select>/Drafts 09:40:48.680000 2016-11-18 UTC - 4012 [1211140]: proposed url = drafts folder for connection has to wait = FALSE can run = FALSE-EXTRACT

  Excerpt from log file showing the problem.

  Have been using a Hotmail account by using IMAP on Thunderbird for a long time without problem. Then BANG. 02:00 and it refuses to work. TB message is 'server xxxx offline. The server may be down or there may be a network problem. »

  Problem with google, a lot of people seems to have. Usually involves the connection cache limit. Located on logging - you can see the result above. Connection cache limit. Set it to 1. No help.

  Contact Microsoft technical support. They were absolutely * no need, just make the assumption that the error lies between the keyboard and the Chair. They had me remove the Treasury Board account and recreate it. Which it won't, as it bangs against the connection cache limit. They say Thunderbird problem and refuse to help more. Help, please.

  Issue can be closed.

• Cannot increase the size of the cache, even if I put it at 500 MB, it shows 27,65 mb, what should I do?

  I can't increase the size of the cache. everything I put in the décor, it says max cache limit 27,65 mb. I have 3 GB of ram and 200 GB hard drive.

  1. Press Alt + T
  2. Click on Options
  3. Tap the category advanced options
  4. Under this exclusive network
  5. Check the box "Override automatic cache management.
  6. Enter your desired value.

  

  Note: If the answer to anyone who solves your problem, then please mark this reply as 'resolved' right of this response after log you in to your account. It will help us to focus on new questions.

• Caching question, why do you always have to do over and over again?

  In Bridge, seems always, I have a 3000 images of the caches folder. Then, two weeks later, I opened this file, and it's like the bridge has never seen before. What is everything? Thank you.

  Levinaderuijter wrote:

  What does bloody a cache if such information is not cached in it and immediately available when opening a folder. I mean, what is then exactly what is cached?

  As we mentioned in this forum often, Cache is not the strong point for the bridge. However the problem you and Kevin describe is not common.

  For the cache, you can set preferences to export cache on file if possible and which should speed things up when visiting a folder with this cache file exported. Also in the preferences, there is a slider for the amount of files to store in the cache. Ideally, when the limit for that amount is reached the Cache replaces the older files, so it might be that you have him reached the limit for the central cache and lost files to the previous file cached.

  When after you move the files to another folder, it must also be cached for the new location, but unfortunately enough isn't this work always as it should.

  Also, you must leave bridge to give time to cache the files completely, this could take a while depending on the size of files, number of files, and speed of the processor of your Mac.

  Another question, if you have changed the settings default to ACR or installed a version update for ACR with the other settings to bypass can start caching again to match thumbs with these settings.

  If no other default settings of ACR are applied or in the cache limit is not reached, it should be no problem to look at a previous set file in cache.

• Same caveat 910 ESENT window 8 Pro64x

  Recently and intermittently, I get warnings similar to present, I have not observed the thinking and the impact on my system:

  taskhostex (3416) cache size to database maintenance task took 60 seconds without completing. This can result in severe performance degradation. The current cache size is 74 buffers above the configured cache limit (121% of the target). Size cache maintenance expelled 3 pads, tempted 41832 flush and rinse properly 0 pads. He was executed 53953 times given that maintenance has been triggered.

  I had 8 of them today, in a time of 8 minutes.  Just browse the internet, no games or Office programs will, etc...  8 MB of RAM and no memory problem.

  I saw this question posted online several places but no answers.

  Microsoft: any advice on what to explore in what concerns the event viewer message?

  Thank you

  Hello

  Your problem may be different, but look at the ' UPDATE: 'in this announcement..."

  http://www.EventID.NET/display-EventID-910-source-ESENT-eventno-11177-phase-1.htm

• Lightroom allows you to stop responding

  Suddenly Lightroom guard gel on me for example when I pass it draws to develop. All I can do is to use the Task Manager to end the process, then restart Lightroom. It used to be fine and this only started happening in the last two weeks. My PC is running Windows 10 and has 8 GB of memory.  All other programs work Ok. Someone at - it ideas?

  Hi mickhick,

  Greetings!

  Try these steps

  Open Lightroom

  Click on edit-> preferences-> Performance

  Uncheck the box use graphics processor.

  Click Ok

  Lightroom to close and reopen that.

  If the steps above do not work, try this

  Open Lightroom

  Click on edit-> preferences-> file handling

  Increase the size of the cache of 30 GB and also click Purge cache both video and image.

  Do not increase the video cache limit.

  Click Ok

  Lightroom to close and reopen that.

  Now, try

  Concerning

  Jitendra

• 'Create View' too long

  Hi all
  
  When I run the command 'create view', it takes a lot of time on Oracle 10.2.0.5. I tried a configuration for tuning but does not reach to the solution. You can find some information about my request.
  
  CREATE or REPLACE FORCE VIEW vcg.vw_as_po AS SELECT...
  
  SQL > select event, total_waits, Total_timeouts, time_waited, max_wait from v$ session_evenement where sid = 16321; *
  
  EVENT, TOTAL_WAITS, TOTAL_TIMEOUTS, TIME_WAITED, MAX_WAIT
  Journal sync files, 1, 0, 0, 0
  DB file sequential read, 60, 14, 0, 1
  cursor: hand S waiting on X, 26287 26287, 25787, 1
  SQL * Net message to client, 43, 0, 0, 0
  SQL * Net more data to the client, 10, 0, 0, 0
  SQL * Net client message, 43, 0, 78472 26872
  SQL * Net more data from client, 3, 0, 0, 0
  events in other waitclass, 48, 48, 45569 977
  
  SQL > select event, seconds_in_wait, wait_time, session state $ v where sid = 16314; *
  EVENT SECONDS_IN_WAIT - STATE - WAIT_TIME
  initialization of xdb 312 0 pending schema cache
  
  What can be the reason of this latency? Do you have any idea?
  
  Thank you...

  ozgurumut wrote:
  Hi all

  When I run the command 'create view', it takes a lot of time on Oracle 10.2.0.5. I tried a configuration for tuning but does not reach to the solution. You can find some information about my request.

  CREATE or REPLACE FORCE VIEW vcg.vw_as_po AS SELECT...

  SQL > select event, total_waits, Total_timeouts, time_waited, max_wait from v$ session_evenement where sid = 16321; *

  EVENT, TOTAL_WAITS, TOTAL_TIMEOUTS, TIME_WAITED, MAX_WAIT
  Journal sync files, 1, 0, 0, 0
  DB file sequential read, 60, 14, 0, 1
  cursor: hand S waiting on X, 26287 26287, 25787, 1
  SQL * Net message to client, 43, 0, 0, 0
  SQL * Net more data to the client, 10, 0, 0, 0
  SQL * Net client message, 43, 0, 78472 26872
  SQL * Net more data from client, 3, 0, 0, 0
  events in other waitclass, 48, 48, 45569 977

  SQL > select event, seconds_in_wait, wait_time, session state $ v where sid = 16314; *
  EVENT SECONDS_IN_WAIT - STATE - WAIT_TIME
  initialization of xdb 312 0 pending schema cache

  What can be the reason of this latency? Do you have any idea?

  Thank you...

  It seems that the view implies distance DB (@DB_LINK)
  Is this correct?

• When the memory coherence is full, what consistency do?

  Dear Expert:
  
  I have a problem in customer, they ask:
  When the memory coherence is full, what consistency do?
  He takes care to write data or the entry on the disk?
  If it can be supported, how can I config?
  
  
  I read some documents, but I find things like this:
  < local plan >
  LRU <-eviction strategy > < / eviction strategy >
  < high-units > 1000 < / high units >
  < expiry delay > 1 h < / timeout >
  < / local plan >
  
  but I can not find somethings on the coherence jvm memory usage?
  
  
  Thanks in advance.

  Hello

  There is no magic solution to stop short of memory coherence. A cluster of coherence is a limited resource and has a finite size and you need to do some sort of exercise as you would with something like a database capacity planning system. You wouldn't continue to put data in a database without him running out of resources, and the same is true with consistency.

  Yes, there are things like expiry which allows you to limit the size of the caches, but like the previous poster said, when the limit is reached data will be evicted from memory. Unless you have some form of persistent storage for these data using something like a dumps, while the data is lost.

  You can set the overflow to disk so that when a size the cache limit is reached as described here http://download.oracle.com/docs/cd/E15357_01/coh.360/e15723/cache_examples.htm#BACCHCIA

  The problem with the ousting of size based and exceeded the size in function, is that the limit is per cache per JVM. This means that for a system with several caches and services that you usually end up expulsion or overflow to disk for a cache that reached its limit when there still may be a lot of memory left that you need to allow for each cache being full in your design.

  I saw people in the past are trying to find different ways of ousting of data based on the used JVM heap, but they never seem to be satisfactory. If you've seen a chart of the JVM heap usage you will see that it is usually a model of Sawtooth constantly up and down. A JVM could hit 90% use but still have a lot of real space because he had not recently made a GC. If you have a schema data eveicted when the reached JVM say 90% you could start to expel the data too early. Also, it's probably enough data in a cluster push possile faster than data can be evicted if you might still run out of memory. A cluster of coherence consists of multiple JVM processes and if you get skewed the disaggregation of data or you caching of objects of different sizes, it is quite possible to get Java virtual machines in the cluster running off lot well before others. The project I'm working on that, we had a situation where we had a few nodes in the cluster using more than 300 MB of heap more than the other nodes in the cluster - is quite a big difference when the total heap was only 2.5 GB.

  As I said the best thing to do is good capacity planning. Work out how much you need to organize and work on the size of your cluster based on that data. You probably still have some sort of eviction of the data well. The system on which I work at eviction of the moment according to some data and custom eviction of other data based on business rules. Custom eviction is juats another process that verifies the data and expels the relevant stuff.

  JK

• Creating movie SWF errors file

  Dear Forum,

  CS5.5 running and I have errors when I publish, debug or listen to samples:

  Creating SWF movie to the error file.

  Make sure that the destination file is not read-only or opened by another application. Also, check that the file name is too long.

  This error appears constantly and sometimes didn't appear at all. I sometimes find myself hammering Alt + Maj + F12 for twenty times before we get to "through". I've seen a number of subjects passed on this issue, but none of the solutions presented here seemed permanent solutions. Does anyone have an idea? It is kill productivity, really.

  Thanks in advance.

  Disable that and also clear your ASO cache in the same menu as you test your movie from. See if you have a cache problem.

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• The video cache failed to limit

  Hello

  I do the initial installation of my catalog, so I import, move... lots of images and videos.

  My video cache is set to 3 GB max. However, it grew to over 150 GB. I had to manually purge.

  I use LR 2015.2.1 release.
  Is this a bug?

  Is - this 3 GB per video or an overall limit? I think it's one of the mysteries of Lightroom.

  Manual purge is the only option I know. Perhaps you could make it a habit to purge before importing new videos to work on.

  I tend to not import videos in LR as I see in Bridge and I first to the Assembly.

  http://feedback.Photoshop.com/photoshop_family/searches?query=Lightroom+video+cache&x=0&y= 0 & style = subject

• Is there a time limit to upgrade application? Each of them are: pending.

  Is there a time limit to upgrade application? Each of them are: pending.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html
  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• How limit the cache coherence specific servers in the cluster?

  Hello

  I had two knots of osb and consistency both servers in the cluster. I have two caches (a cache of the BSO and other employee cache).

  In the cache of the BSO, I put the properties of OSB. So when the OSB server is down, I don't want one of these properties to be cached.

  So, I need to limit the cache of OSB OSB only to nodes. In this regard, any help is very useful.

  Kind regards

  Praveen

  You can accomplish this with one or more caches in different services. A cluster of coherence manages a group of Java virtual machines, in which each virtual machine JAVA manages one or more services. Each cache must belong to a service. If a cache 'X' belongs to the service 'A' and cache 'Y' service 'B', we hear this cache 'X' will live only in the JVM that contains the service "A". You can create the same structure with OSB and external cache servers.

  Dave Felcey, product manager of coherence, wrote an interesting blog that explains this scenario more information: https://blogs.oracle.com/felcey/entry/coherence_clustering_principles

  See you soon,.

  Ricardo Ferreira