Pending transactions

I have two pending transactions on my account for $1 each, apart from the $16.99 which is waiting for the student rate / I pay. Can someone help me with this?

Hello

For information, please see the link below:

The payment section would explain it about the same

Adobe Store | Online order and payment FAQ

Let us know if this helps!

Tags: Adobe

Similar Questions

Transactions of unknown materials

I have a problem with transactions that are not be encrypted. They have no errors. I followed the instructions of solve close period pending Transaction R12 (Doc ID 1069492.1() but I could not solve the problem. Can someone please help.

Thank you.

Hello

It seems that your cost Manager is perhaps not active, or you use a method of costs for operations to assess the cost in the order and the first record might be in error.

To check if the cost Manager is active, go to: responsibility of stocks > Setup > Interface managers, Cost Manager must be active. If not, run it from the tools > Launch Manager

To check if there are records that are not encrypted by mistake, run the query: select count (*) in the mtl_material_transactions where costed_flag = 'E ';

If all these have been checked, and you have seen records, open an SR with the support of the inventory team, subcomponent 508, produced transactions to ask for help.

I hope this helps.

Kind regards
Released

hot flashes control point transaction log
Hello
Is there a way of hunting/purge the transaction logs, other than to drop the schema for replication?

Published by: 899967 on November 27, 2012 12:52 AM
If the logs are kept even after the two control points, so it is because they are required for replication. This means either that replication is not working or is it falling far behind. Newspapers to be served in a number of ways that you can do, but it will lose all pending transactions and replicas will be out of sync. You can then choose a replica as the "golden master" and re-instantiate copies which form using ttRepAdmin - duplicate.

The two ways to "purge" the newspapers are:

1. stop the repagent and then slide the replication scheme. Recreate the schema, restart the repagent, drop each Subscriber and reinstantiate the use ttRepAdmin - double.

2. use ttRepAdmin to define the "State" of the flow of replication from the node with logs accumulated at each Subscriber to 'stop '. Drop each Subscriber, then re-instantiate then using ttRepAdmin - duplicate.

(2) If a single subscriber results in the accumulation of journal you can apply it selectively to just this Subscriber.

Chris

delete number of transactions
Hello

We have a master database which runs on oracle 9iR2 and a backup replica database that runs on 11g. We have a replication between servers. There is a huge amount of data derived from master Replica.

Yesterday, database master stacked and I needed to reset the server. When it restarted, the database instance began to work properly. But there was a lot of deferred transactions that are from the master replica. I have not programmed procedure push (regular link) 11 g EM then re-create. So, it worked after that. But some transactions left, before recreating the latest schedule. After that I could not find any solution how to send these transactions from replica to the master. I started to remove 11 g EM. I removed all, but they stayed on the EM 9i replication topology. In addition, topology shows that there are 322 deferred transactions. When I look at deftrandest view (select * from deftrandest), these transactions were all there. But, when I look at views errors error delayed transactions, there are no errors.

How can I remove or push these transactions and you can tell me how to check concurrency and consistensy 2 databases are exactly the same?

Kind regards.

Edited the: October 26, 2008 11:32
It is not clear what you mean by ' after that I couldn't find any solution how to send these transactions from replica to the master.» I started to remove 11 g EM. I removed all, but they stayed on the 9i EM replication topology. "

Did you delete pending transactions in DEFTRAN/DEFTRANDEST? How (what command) did you fact then?

I guess you deleted transactions that have been waiting for a surge of 11g in 9i but did not delete transactions that have been awaiting a boost from 9i to 11g. You know for certain that there are no dependencies between the two databases - for example, with regard to the update of the same line (s)?

Could someone check it out to see if any malware or a virus on my iMac

Could someone please check my results of this diagnostic Test, I did thanks

Departure time: 08:59:02 23/01/16

Review: 1295

Model identifier: iMac12, 1

The system version: OS X 10.10.5 (14F1605)

Kernel version: Darwin 14.5.0

Since the start time: 09:59

UID: 501

ATX

WDC WD5000AAKS-402AA0

Bluetooth

Apple wireless keyboard

Apple Magic Mouse

Energy (for life)

kernel_task (UID 0): 14,73

Energy (sampled)

kernel_task (UID 0): 9.96

Firewall: on

Diagnostic reports

2016-01-23 com.apple.WebKit.WebContent crash

IO errors

disk2s2: data against the wall 2

disk2s2: close: journal 0xffffff8011138c20, is not valid. abandonment of 1 pending transactions

disk2s2: close: journal 0xffffff80198a7c20, is not valid. abandonment of 1 pending transactions

disk2s2: do_jnl_io: strategy err 0 6 2 x

Volumes

disk0s2: /.

disk1s1: Volumes/Malwarebytes Anti - Malware

HID errors: 7

The core journal

17 jan 10:46:45 failed to get the hibernation image file name

17 jan 11:17:05 failed to get the hibernation image file name

Jan 17 14:06:59 * GPU Hardware VM is disabled (multispace: disabled, the page updated table with DMA: off)

Jan 17 14:20:25 failed to get the hibernation image file name

18 jan 09:07:01 * GPU Hardware VM is disabled (multispace: disabled, the page updated table with DMA: off)

18 jan 09:40:48 failed to get the hibernation image file name

19 jan 11:44:11 * GPU Hardware VM is disabled (multispace: disabled, the page updated table with DMA: off)

19 jan 11:44:20 IOHIDSystem: grab IOHIDPointing failed.

19 jan 11:44:20 IOHIDSystem: grab AppleMultitouchHIDEventDriver failed.

January 22, 21:26:44 * GPU Hardware VM is disabled (multispace: disabled, the page updated table with DMA: off)

22 January 21:26:53 IOHIDSystem: grab IOHIDPointing failed.

22 January 21:26:53 IOHIDSystem: grab AppleMultitouchHIDEventDriver failed.

22 January 22:15:59 HFS: bitmap scan error: 5 on flight = HAPPY

22 January 22:32:13 f: disk2s2: write_journal_header: error writing to the journal header!

22 January 22:32:13 f: disk2s2: close: journal 0xffffff8011138c20, is not valid. abandonment of pending transactions

22 January 22:52:06 * GPU Hardware VM is disabled (multispace: disabled, the page updated table with DMA: off)

Jan 22 23:00:59 * GPU Hardware VM is disabled (multispace: disabled, the page updated table with DMA: off)

Jan 22 23:01:07 IOHIDSystem: grab IOHIDPointing failed.

Jan 22 23:01:07 IOHIDSystem: grab AppleMultitouchHIDEventDriver failed.

Jan 22 23:01:07 IOHIDSystem: grab AppleEmbeddedKeyboard failed.

22 January 23:38:49 jnl: disk2s2: write_journal_header: error writing to the journal header!

January 22, 23:38:50 f: disk2s2: close: journal 0xffffff80198a7c20, is not valid. abandonment of pending transactions

Jan 23 02:20:47 USBF: 12047.159 IOUSBCompositeDriver(Mass_Storage):GetConfigDescriptor - GetFullConfigDescriptor (0) #2 returned NULL, try ResetDevice and then try again

Jan 23 02:23:29 msdosfs_fat_uninit_vol: error msdosfs_fat_cache_flush 6

23 jan 05:40:01 msdosfs_fat_uninit_vol: error msdosfs_fat_cache_flush 6

System log

23 jan 08:03:25 DCs: securityd_xpc_dictionary_handler Malwarebytes Ant [3522] copy_matching the operation could not be completed. (OSStatus-34018 - customer has rights - the identification of demand or Keychain-Access-groups)

23 jan 08:03:25 Malwarebytes Anti-Malware: SecOSStatusWith error: [-34018] the operation could not be completed. (OSStatus-34018 - distance error error: the operation couldn't ' Aot be completed.) (OSStatus-34018 - customer has rights - the identification of demand or Keychain-Access-groups))

23 jan 08:03:28 DCs: securityd_xpc_dictionary_handler Malwarebytes Ant [3522] copy_matching the operation could not be completed. (OSStatus-34018 - customer has rights - the identification of demand or Keychain-Access-groups)

23 jan 08:03:28 Malwarebytes Anti-Malware: SecOSStatusWith error: [-34018] the operation could not be completed. (OSStatus-34018 - distance error error: the operation couldn't ' Aot be completed.) (OSStatus-34018 - customer has rights - the identification of demand or Keychain-Access-groups))

23 jan 08:11:08 WindowServer: WSGetSurfaceInWindow: surface invalid 422992068 for window 3117

23 jan 08:23:23 com.apple.sbd: SOSCCThisDeviceIsInCircle SOSCCThisDeviceIsInCircle! 8

23 jan 08:23:23 com.apple.sbd: SOSCCThisDeviceIsInCircle SOSCCThisDeviceIsInCircle! 9

23 jan 08:31:31 WindowServer: WSGetSurfaceInWindow: surface invalid 422332953 for window 3172

23 jan 08:37:10 WindowServer: WSBindSurface: surface invalid 650415322 for window 3213

23 jan 08:38:54 WindowServer: WSBindSurface: invalid 433261076 for window 3224 the surface

23 jan 08:42:43 WindowServer: WSBindSurface: surface invalid 664301010 for window 3238

23 jan 08:43:20 WindowServer: WSBindSurface: invalid 439317136 for window 3243 the surface

23 jan 08:43:51 WindowServer: WSGetSurfaceInWindow: surface invalid 476177180 for window 3251

23 jan 08:44:24 WindowServer: WSBindSurface: surface invalid 653949393 for window 3256

23 jan 08:46:27 WindowServer: WSBindSurface: surface invalid 450908686 for window 3273

23 jan 08:46:44 WindowServer: WSBindSurface: not valid for window 3263 438396383 the surface

23 jan 08:46:46 WindowServer: WSBindSurface: surface invalid 513682908 for window 3267

23 jan 08:48:23 WindowServer: WSBindSurface: surface invalid 525505794 for window 3281

23 jan 08:48:48 TextEdit: CoreText CopyFontsForRequest received mig CPI error (FFFFFFFFFFFFFECC) font server

23 jan 08:48:48 TextEdit: CoreText CopyFontsForRequest received mig CPI error (FFFFFFFFFFFFFECC) font server

23 jan 08:49:13 WindowServer: WSBindSurface: surface 673211523 invalid for 3308 window

23 jan 08:50:13 WindowServer: WSBindSurface: surface invalid 431320336 for window 3314

23 jan 08:50:44 WindowServer: WSGetSurfaceInWindow: surface invalid 436952015 for window 3323

23 jan 08:51:33 WindowServer: WSBindSurface: surface invalid 550937998 for window 3327

23 jan 08:54:50 WindowServer: WSBindSurface: surface invalid 546418892 for window 3318

launchd Journal

18 jan 09:07:17 com.apple.xpc.launchd.user.501.100006.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.apple.FolderActions.folders.plist, 2 = error: no such file or directory

19 jan 11:44:21 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.199, = com.nektony.App - cleaning-Helper, error = 119 service: Service is disabled

19 jan 11:44:21 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.199, = com.trendmicro.ATLoginItemHelper, error = 119 service: Service is disabled

19 jan 11:44:26 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.apple.FolderActions.folders.plist, 2 = error: no such file or directory

19 jan 11:44:26 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.apple.FolderActions.folders.plist, 2 = error: no such file or directory

22 January 21:26:55 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.199, = com.nektony.App - cleaning-Helper, error = 119 service: Service is disabled

22 January 21:26:55 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.199, = com.trendmicro.ATLoginItemHelper, error = 119 service: Service is disabled

22 January 21:26:56 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.apple.FolderActions.folders.plist, 2 = error: no such file or directory

22 January 21:26:56 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.apple.FolderActions.folders.plist, 2 = error: no such file or directory

22 January 22:49:40 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.bombich.ccc-user-agent.plist, 2 = error: no such file or directory

22 January 22:52:14 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.206, = com.nektony.App - cleaning-Helper, error = 119 service: Service is disabled

22 January 22:52:14 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.206, = com.trendmicro.ATLoginItemHelper, error = 119 service: Service is disabled

22 January 22:52:14 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.206, = com.bombich.cccuseragent, error = 119 service: Service is disabled

22 January 22:52:16 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.bombich.ccc-user-agent.plist, 2 = error: no such file or directory

22 January 22:52:39 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.apple.FolderActions.folders.plist, 2 = error: no such file or directory

22 January 22:52:39 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.apple.FolderActions.folders.plist, 2 = error: no such file or directory

Jan 22 23:01:56 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.213, = com.nektony.App - cleaning-Helper, error = 119 service: Service is disabled

Jan 22 23:01:56 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.213, = com.trendmicro.ATLoginItemHelper, error = 119 service: Service is disabled

Jan 22 23:01:56 com.apple.xpc.launchd.user.501.100005.Aqua: could not import the appellant: appellant = otherbsd.213, = com.bombich.cccuseragent, error = 119 service: Service is disabled

Jan 22 23:01:57 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.apple.FolderActions.folders.plist, 2 = error: no such file or directory

Jan 22 23:01:57 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.apple.FolderActions.folders.plist, 2 = error: no such file or directory

Jan 22 23:05:01 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.bombich.ccc-user-agent.plist, 2 = error: no such file or directory

Jan 23 00:00:08 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.bombich.ccc-user-agent.plist, 2 = error: no such file or directory

Jan 23 02:50:59 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.bombich.ccc-user-agent.plist, 2 = error: no such file or directory

23 jan 07:20:41 com.apple.xpc.launchd.user.501.100005.Aqua: didn't read path: path = Users/USER/Library/LaunchAgents/com.bombich.ccc-user-agent.plist, 2 = error: no such file or directory

The console log

Jan 17 05:04:36 DrCleaner: 17/01/2016 05:04:36:638, [ERRO], AppSandbox: bookmarkDataIsStale re-create it with the existing url object, [AppSandboxFileAccess.m (216)]

Jan 17 05:04:36 DrCleaner: 17/01/2016 05:04:36:638, [ERRO], AppSandbox: persistPermissionURL: / Users/USER with key: / Users/USER [AppSandboxFileAccess.m (167)]

Jan 17 05:04:36 DrCleaner: 17/01/2016 05:04:36:644, [ERRO], AppSandbox: create sandbox permissions failed with: / Users/USER [AppSandboxFileAccess.m (177)]

Jan 17 05:04:36 DrCleaner: 17/01/2016 05:04:36:724, [ERRO], AppSandbox: something went wrong! NSCocoaErrorDomain / 256, localizedDescription: cannot open the file 'melissahollis'., localized FailureReason: (null), [AppSandboxFileAccess.m (179)]

Jan 17 05:04:36 DrCleaner: 17/01/2016 05:04:36:724, [ERRO], AppSandbox: bookmarkDataIsStale re-create it with the existing url object failed, [AppSandboxFileAccess.m (226)]

Jan 17 05:04:45 DrCleaner: 17/01/2016 05:04:45:616, [ERRO], AppSandbox: persistPermissionURL: / Users/USER with key: / Users/USER [AppSandboxFileAccess.m (167)]

17 jan 06:03:19 DrCleaner: poentialFreeMemoryPercentage 06:03:19:699, [WARN], 17/01/2016: 6.454182% is less than the requirement, no need to clean up memory

Load system services

com Apple.watchdogd

com.Bombich.ccchelper

com.malwarebytes.MBAMHelperTool

System services disabled

com Apple.crsud

Connection disabled services

com.trendmicro.ATLoginItemHelper

com.Bombich.cccuseragent

Services for users with disabilities

com.trendmicro.ATLoginItemHelper

com.Bombich.cccuseragent

iCloud errors

cloudd 35

Photos 12

5 viewfinder

Spot 3

Bird 2

Continuity errors

sharingd 1

Small files: 40

Lockfiles: 1

Data packets

/ Users/USER/Library/Application Support/com.bombich.ccc

Content of /Library/LaunchDaemons/com.bombich.ccchelper.plist

-mod date: 22 January 23:08:17 2016

-checksum: 710721696

http://www.Apple.com/DTDs/PropertyList-1.0.DTD">

KeepAlive

SuccessfulExit

Label

com.Bombich.ccchelper

MachServices

com.Bombich.ccchelper

Program

/Library/PrivilegedHelperTools/com.Bombich.ccchelper

ProgramArguments

/Library/PrivilegedHelperTools/com.Bombich.ccchelper

RunAtLoad

.. .and 1 more line (s)

Content of /Library/LaunchDaemons/com.malwarebytes.MBAMHelperTool.plist

-mod date: 23 Jan 08:03:24 2016

-checksum: 2299099766

http://www.Apple.com/DTDs/PropertyList-1.0.DTD">

Label

com.malwarebytes.MBAMHelperTool

MachServices

com.malwarebytes.MBAMHelperTool

Program

/ Library/PrivilegedHelperTools/com. Malwarebytes.MBAMHelperTool

ProgramArguments

/ Library/PrivilegedHelperTools/com. Malwarebytes.MBAMHelperTool

Content of /System/Library/LaunchAgents/com.apple.SafariPlugInUpdateNotifier.plist

-mod date: 21 18:57:59 Dec 2015

-checksum: 941105980

http://www.Apple.com/DTDs/PropertyList-1.0.DTD">

EnablePressuredExit

Label

com.apple.SafariPlugInUpdateNotifier

Program

/ usr/libexec/SafariPlugInUpdateNotifier

LaunchEvents

com Apple.FSEvents.Matching

UserFlashPlugInModified

Path

~/Library/Internet plug-Ins/Flash Player.plugin

SystemFlashPlugInModified

Path

/ / Library/Internet Plug-Ins/Flash Player.plugin

.. .and 3 more lines

Contents of Library/LaunchAgents/com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID. plist

-mod date: 18 Oct 09:15:12 2015

-checksum: 640249392

http://www.Apple.com/DTDs/PropertyList-1.0.DTD">

Label

com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.UUID

ProgramArguments

/ System/Library/Frameworks/addressbook. Framework/Resources/AddressBookS ourceSyncScheduleHelper

-scheduleSync

UUID

StartInterval

120000

Applications

/ Applications/disc Inspector.app

-com.nektony.diskinspectors

Library paths

/usr/local/clamXav/lib/libclamav.6.dylib

/usr/local/clamXav/lib/libclamunrar.6.dylib

Facilities

Disk Doctor: 11/09/2015 08:26

OsTrack: 11/09/2015 08:23

Download buddy: 11/09/2015 08:21

SupremePlayer Lite: 11/09/2015 03:34

ClamXav Scanning Engine v0.98.7 update 06:23 / 10/2015 14:31

Time elapsed (s): 243

Only the author of this diagnostic test will have an idea what it is say you.

You have apparently already run MalwareBytes Anti-Malware for Mac, so we can expect probably any form of Adware.

That being said, rather than assuming that you have been infected by software malicious than Adware (which is extremely rare nowadays), why don't you start by simply describing what problems observe you. This way you will get much more help much more quickly than that. Never send a diagnosis until someone asks. It's just how this forum works optimally.

The validation process hung for a table only!

Hi all
There is a table contains 79 columns (with a cloumn CLOB) with about 100 000 record, sometimes a problem occurs only with this table (and only these days) when you attempt to insert, update, delete from this table, the validation process hung! Why? and how to solve? I can't say why this problem occurs.
We renamed the table and re-create using EXPDP, IMPDP orders, re-create triggers on it and repeat grants thereon to the roles that the previous, this procedure has solved the problem for maybe one day only, but the problem returns!
Notes:
This table is on a table space users, otherwise I use DB Oracle 11 g R2

> The question is: What does it mean the blocking locks? and why this problem occurs? and how to avoid it from happening again?

Have you read this:

https://docs.Oracle.com/CD/E18283_01/server.112/e16508/consist.htm

For example, this part:

Written in conflict read-committed Transactions

In a read committed transaction, a write conflict occurs when the transaction attempts to change an update by a simultaneous uncommitted transaction line, sometimes called a blocking transaction.

The read committed transaction awaits the transaction that blocks at the end and release his lock of line. The options are the following:

-If the blocking transaction is cancelled, the pending transaction then proceeds to change the locked row previously as if the other transaction never existed.

-If the blocking transaction is committed and frees its locks, then the transaction pending proceeds to update scheduled for the newly modified line.

> Where can I find this log file please?

For example:

C:\app\oracle\diag\rdbms\oracle\orcl\trace\alert_orcl.log

Kind regards

Zlatko

DataGuard (activate a physical standby as a stand-alone database database)?

Hi all
Can I please ask advice on how it would activate a physical database ensures for 11.2.0.4?
Note - I do not want to return the "standby" to watch again...
Note 1 – I don't have (and don't use flashback technology to do this) - so I can't use a watch "snapshot"...
Note 2 - the 'primary' current cannot be touched.
Something like below?
Repeat stop applies to pending
SQL > alter database recover managed standby database cancel;
Stop redo pending transaction logs.
PRIMARY
SQL > ALTER SYSTEM SET LOG_ARCHIVE_DEST_STATE_2 = DELAY;
Activate and open the database physical sleep.
Physical STANDBY
SQL > ALTER DATABASE ENABLE PENDING DATA base;
SQL > STARTUP MOUNT FORCE;
SQL > alter database base_de_donnees ensures together to improve performance;
SQL > ALTER DATABASE OPEN;
Concerning

It wouldn't affect Production (primary). It's just the steps of failover.

The same applies to the role transition, but in a role transition, you must first pass at the primary level of Eve and the day before, you must run the digital switchover to make primary.

You could refer to this https://docs.oracle.com/cd/E11882_01/server.112/e41134/role_management.htm#SBYDB4769 you would get to the difference of the steps for the passage and failover.

-Jonathan Rolland

This feature is not available for this responsibility.

I adapted a menu for the closing of the stock period. It works properly only to show the Transaction pending form, but an error shows trying to see (click to OPEN) the details of pending Transactions. Please help me solve this problem.
Details below:
Also given personalized menu below:

Hello

I guess that you may need to add the INV_TRANSACTIONS menu to your custom menu...

So can you please create a personalized menu and add INV_ACOUNTING and INV_TRANSACTIONS _CLOSE and test

Re how to recover from A corrupted or deleted TLOG (Doc ID 764603.1)

What/where is the table of tran $ xa mentioned in this doc, and how is it used? (The scenario that I think is where the request has failed but the TLOG was not shared / mirror and a manual recovery of uncertain transactions is necessary.) The RMs would be MQ 7.0.1 and DBMS Oracle 11 g 2).
Thanks for any help.

Hello

I do not have the document you speak so I can't say with certainty what it is, but from the name, it sounds like a table of Oracle database or notices related to XA transactions. Smoking does not use a table or a view of the same name.

To understand what is happening if the Tuxedo transaction log is 'lost', let us look at the State of transactions:
- Before calling tpcommit(), nothing in the Tuxedo transaction log. There may be in the RMs application interacts with pending transactions, but none of them will be established. If a failure will leave at this stage these transactions suspended until they have time because during the restart of Tuxedo he calls xa_recover(), but he won't be in the RMs uncertain transactions because they have not been prepared.
- After the application calls tpcommit() before RMs all respond positively to the xa_prepare(), yet once there will be nothing in the Tuxedo transaction log, so a failure of Tuxedo at this stage is the same as above.
- Once all of the RM responded positively to xa_prepare(), then and only then will Tuxedo create a transaction log entry. At this point if Tuxedo fails, it will read the transaction log rebuild the table of partially committed transactions and then call xa_recover() on the RMs. For all RMs report transactions that are not in the list of partially committed transactions, Tuxedo will call xa_rollback(). If the transactions reported by the RMs appear in the list, then Tuxedo will call xa_commit(). If we delete the transaction log could not be read, etc., there will be no entries in the partially committed operations, so all transactions reported by the RMs will be rolledback. This CAN cause an inconsistency that the transaction may already have been committed by an another RM involved in the transaction.
- Once all of the RM responded positively to xa_commit(), Tuxedo lazily deletes the entry of transaction log. At this point, any breach will be similar to the first bullet above.
Can you give us some details on what exactly is your concern?

Kind regards

Todd little

Chief Architect of Oracle Tuxedo

Job - planning with a commit records fit

Hi Experts,
Oracle DB 11g XE - Version
I planned a work using dbms_scheduler that will insert a record in table T for every minute. I does not COMMIT inside my procedure but records are committed after each successful run. How is it possible.
Here is my code.

SQL > create table t (empno number, creation_date date);

Table created

SQL > create or replace procedure test_proc
2 is
3
4 start
5
6 insert into t values (1, sysdate);
7
8 end;
9.

Procedure created

SQL > START
2 DBMS_SCHEDULER. () CREATE_JOB
job_name 3 = > "test_job"
job_type 4 = > "PLSQL_BLOCK"
5 job_action = > ' BEGIN test_proc; END;',
6 = start_date > cast (sysdate as timestamp with time zone).
7 repeat_interval = > ' FREQ = MINUTELY ",
8 = end_date > cast (sysdate + 1 as a timestamp with time zone).
9 license = > TRUE,
10 comments = > 'insert record into table t');
11 END;
12.

PL/SQL procedure successfully completed

SQL > select * from t;

EMPNO CREATION_DATE
---------- -------------
11/12/2013 1, 11
11/12/2013 1, 11
11/12/2013 1, 11
11/12/2013 1, 11
11/12/2013 1, 12
11/12/2013 1, 12

11/12/2013 1, 12
11/12/2013 1, 12
11/12/2013 1, 12

9 selected lines

See you soon,.
Suri

Suri wrote:

Hello

Here my question is not related to commit / rollback when the session completes normal/abnormal. My question is related to the job in Oracle.

See you soon,.

Suri

In fact, it's what is talking about your question.

When you schedule a task to run, it does not work in your current session, but in a session created for this work at the same time that it runs. When the work is done, the session is 'exit' and by default, the pending transactions are committed. The same goes if you do with DBMS_JOB and DBMS_SCHEDULER.

The difference with DBMS_JOB and DBMS_SCHEDULER, is when you actually submit the work with DBMS_SCHEDULER, appeal procedure issues a commit of your current session, submit a job with DBMS_JOB does not validate your current session.

Grid d? infrastructure is needed for Active Data Guard fast failover?

Hello
I'm currently deploying an Active Data Guard of 11 GR 2 configuration with a captain and two slaves physical standby and failover accelerated for a Java JDBC application. Each instance has a read-only service that is always active and a service of reading / writing that is activated only on the master:
```
srvctl add service -d smsgsig1 -s smsgro -l PRIMARY,PHYSICAL_STANDBY -e NONE -m NONE
srvctl add service -d smsgsig1 -s smsgrw -l PRIMARY -e SELECT -m BASIC -w 10 -z 150
```
Initially, I had planned to use the Service of Notification of Oracle (ONS) to notify the application in case of change of master, that works, however, after a few tests, it seems that simply leave the retry request enough times in the case of a connection failure is sufficient to re-connect to the new master afterwards, in order to complete any pending transaction.
So my question is: since I plan not to use ADD-ONS, do I have the grid infrastructure and Oracle Restart at all to deploy Active Data Guard? The documentation does not explicitly require it, and all the necessary tools, including srvctl, exist in the plain 11 GR 2 home. However the mechanism of activation/deactivation of the service will work without restart? To be honest, I don't think it would be, but that this would simplify the deployment, a little, I thought it would be good to ask :-)
Thank you for your understanding,
Chris

Hello;

The simple answer is no, I could consider changing my order srvctl.

EI SESSION (type switching must be set to both)

m BASIC (set on both)

l PHYSICAL_STANDBY (isn't one of yours in this service role?)
z - 15 (150 retrys seems too high)

q (the value TRUE or FALSE)

w (set on both)

srvctl add service d smsgsig1 s smsgro-l PRIMARY - SESSION - q TRUE m BASE w 10 EZ 15

srvctl add service d smsgsig1 s smsgrw-l PHYSICAL_STANDBY - q REAL - m BASE w 10 EZ 15 SESSION

Best regards

mseberg

Workflow canceled shows to the user
I cancelled a workflow from a user, but it still shows the user as pending for action. How to solve this problem? How can I erase this?
Dear scorpiouno,

You can try the following:

hr_transaction_api.rollback_transaction
(p_transaction_id number
p_validate in Boolean false by default);
commit;

Above statement deletes in temporary tables, pending transactions.

Concerning
Giuseppe

Undo tablespace recreation
Hi all

I use oracle 9i running in solaris 9.I having a called undotbs1 undo tablespace that is size approximately 8.5 GB and

the UNDO_RETENTION setting * 10800 * I want to reduce to 2000 and I want to create a tablespace, undo size about 3 GB and the value in the default undo for the database tablespace.

change the system undo_retention = 2000 scope = both set
create the undo tablespace undotbs2 datafile 'posted' size 3 G
ALTER system set undo_tablespace = undotbs2 scope = both

Drop tablespace undotbs1 including content and data files

Is there a problem if I... I ask because my current undo tablespace size is 8.5 GB?

Thanks and greetings
Yvon Das
>
change the system undo_retention = 2000 scope = both set
create the undo tablespace undotbs2 datafile 'posted' size 3 G
ALTER system set undo_tablespace = undotbs2 scope = both

Drop tablespace undotbs1 including content and data files

Is there a problem if I... I ask because my current undo tablespace size is 8.5 GB?
>
It won't be a problem, but you must change a step you gave.
After the ALTER SYSTEM you will not be able to drop the old table space until it disconnects.

Display deleted mosaic then you will need to have two tablespaces to cancel online and that means a sufficient for both disk space.
>
The database is online, while the switch operation is performed and user transactions can be executed while this command is running. When the switch operation completes successfully, all transactions started after the beginning of the switching operation are assigned to the transaction tables in the tablespace new undo.

The switch operation does not wait for transactions in the old undo tablespace to commit. If there is any pending transactions in the old undo tablespace, the old undo tablespace concludes an offline pending (status). In this mode, existing transactions can continue to run, but undo records for new user transactions cannot be stored in this undo tablespace.

An undo tablespace can exist in this pending offline mode, even after the switch operation. A cancellation pending offline tablespace cannot used by another instance, nor can it be moved. Finally, after all the active transactions have committed, the undo tablespace automatically goes to offline mode offline pending
>

See switching Undo tablespace in the Guide DBA 9i
http://docs.Oracle.com/CD/B10501_01/server.920/a96521/undo.htm#9117

Questions about Failver customer and rapid failover
have some questions about customer and quick Faiolver of Oracle Database HA failover. Before asking these questions, I want to explain my environment. Here are the details.

-We have two physical locations called "ABC" and "PQR".
-ABC is the main site.
-PQR is the backup site.
-In ABC, we have the database to Oracle RAC (11.2.0.2) with two nodes.
-In the PQR, we have only one stand-alone server (11.2.0.2) database with ASM. This isn't a RAC.
-Data Guard has been configured between ABC and PQR and it works as expected.
-Please note that we have a license for Active Data Guard.
-We have products of Oracle Identity Management to ABC and PQR and they will use the RAC database as a primary database that is in the CBA.
-We have not yet set up a Data Guard Broker.

We want to achieve under objectives:

Objective 1:
-------

Whenever primary CARS down completely, standby database becomes a primary database AUTOMATICALLY and it should allow the read/write operation.
I guess it's called 'Fast Failover'. Please let me know if I'm wrong.

Issues related to the:

-To do this, I need to set up Data Guard Broker so that this standy database becomes primary when CARS go down completely with a power outage, planned or not.
-Let's say that CARS falls does completely, how long take Data Guard Broker do standby db as primary.
-What the client application / which is already connected to the CARS.
-Let's DB standby became as primary and after some time if RAC comes back, keep data automatically becomes the primary role of RAC?

Objective 2:
--------

As I explained above, all products Oracle IDM and applications to speak to the RAC database, what do know only on the RAC database, which is the main. They are not aware of the pending database.

-Whenever a client session is underway with the primary database of CARS if CARS completely falls down, we would like to wait until the client session should get transferred datbase standby without losing session information. However before that happens, standby database should become primary because the client session can perform write operations.

-Whenever a client attempts to connect to the primary CARS and assumes that the cab is completely down, we would like to expect from any client connections should are transferred pending database.
However before that happens, standby database should become primary because the client session can perform write operations.

According to my knowledge, above scenarios are called "client failver." Please let me know if I'm wrong.

Issues related to the:
----------

1. Please throw some light to reach above features.
2. According to my understanding, before customer failover happens, fast failover expected has already occurred and ensure should get the switch for the main role. I guess that all this happens thanks to timeout settings. What are those.

Could you please help?

Thank you
I didn't say that clients cannot reconnect automatically when primary fails: I meant that client sessions can generally reconnect and also keep any session state.

Yes, they can reconnect but only to keep the session state for a SELECT statement. It is also possible with Data Guard, not only in the CARS I wrote: here's a demo with 10 g
http://uhesse.WordPress.com/2009/08/19/connect-time-failover-transparent-application-failover-for-Data-Guard/.
What is not possible is to maintain a session state: (INSERT/UPDATE/DELETE) pending transactions must be cancelled.

Edited by: P. Forstmann on Dec 8. 2011 20:30

The cursor declaration error

Hi all, when I'm trying to declare a cursor in a procedure, I get errors. Please correct me where I'm wrong

  1  CREATE OR REPLACE PROCEDURE xxc_lc_rcv_interface_prc IS
  2      v_a    NUMBER;
  3      v_b    NUMBER;
  4      v_c    NUMBER;
  5      v_d    NUMBER;
  6      v_e    NUMBER;
  7      v_f    NUMBER;
  8      v_g    NUMBER;
  9   CURSOR rcv_interface_cur
 10   IS
 11   SELECT shipment_header_id INTO v_c
 12   FROM RCV_SHIPMENT_HEADERS
 13   WHERE SHIPMENT_NUM = 'NOV1124';
 14   SELECT shipment_line_id INTO v_d
 15   FROM RCV_SHIPMENT_LINES
 16   WHERE SHIPMENT_HEADER_ID = v_c;
 17   BEGIN
 18     SELECT rcv_headers_interface_s.nextval INTO v_a FROM dual ;
 19     SELECT rcv_interface_group_s.nextval INTO v_b FROM dual;
 20     SELECT rcv_headers_interface_s.currval INTO v_e FROM dual ;
 21     SELECT rcv_interface_groups_s.currval  INTO v_f FROM dual;
 22     SELECT rcv_transactions_interface_s.nextval INTO v_g FROM dual;
 23  BEGIN
 24  INSERT INTO rcv_headers_interface
 25  (
 26  HEADER_INTERFACE_ID,
 27  GROUP_ID,
 28  PROCESSING_STATUS_CODE,
 29  RECEIPT_SOURCE_CODE,
 30  TRANSACTION_TYPE,
 31  AUTO_TRANSACT_CODE,
 32  LAST_UPDATE_DATE,
 33  LAST_UPDATE_LOGIN,
 34  LAST_UPDATED_BY,
 35  CREATION_DATE,
 36  CREATED_BY,
 37  VALIDATION_FLAG,
 38  COMMENTS,
 39  SHIPMENT_NUM,
 40  FROM_ORGANIZATION_ID,
 41  SHIP_TO_ORGANIZATION_ID,
 42  EXPECTED_RECEIPT_DATE
 43  --RECEIPT_HEADER_ID
 44  )
 45  VALUES
 46   (v_a,                                         --Header Interface ID
 47   v_b,                                          --Group ID
 48   'PENDING',                                    --Processing Status Code
 49   'INVENTORY',                                  --Receipt source Code
 50   'RECEIVE',                                    --Transaction Type
 51   'DELIVER'  ,                                   --AUT Transact Code
 52   sysdate,                                       --last update date
 53   1053,                                         --last updated by
 54   1053,                                        --Last Update Login
 55   sysdate,                                      --creation date
 56   1053,                                         --created by
 57   'Y',                                          --Validation Flag
 58   'Receiving Through Interface',                --Comments
 59   'NOV1124' ,                                --Shipment Number
 60   81,                                           --From Org
 61   82,                                           --To org
 62   sysdate                                     --Expected Receipt Date
 63  );
 64  END;
 65   BEGIN
 66  FOR crec IN rcv_interface_cur loop
 67  INSERT INTO rcv_transactions_interface
 68  (
 69               HEADER_INTERFACE_ID,
 70               GROUP_ID,
 71               INTERFACE_TRANSACTION_ID,
 72               TRANSACTION_TYPE,
 73               TRANSACTION_DATE,
 74               PROCESSING_STATUS_CODE,
 75               PROCESSING_MODE_CODE,
 76               TRANSACTION_STATUS_CODE,
 77               CATEGORY_ID,
 78               QUANTITY,
 79               LAST_UPDATE_DATE,
 80               LAST_UPDATED_BY,
 81               CREATION_DATE,
 82               CREATED_BY,
 83               RECEIPT_SOURCE_CODE,
 84               DESTINATION_TYPE_CODE,
 85               AUTO_TRANSACT_CODE,
 86               SOURCE_DOCUMENT_CODE,
 87               UNIT_OF_MEASURE,
 88               INTERFACE_SOURCE_CODE,
 89               ITEM_ID,
 90               --ITEM_DESCRIPTION,
 91               UOM_CODE,
 92               EMPLOYEE_ID,
 93               SHIPMENT_HEADER_ID,
 94               TO_ORGANIZATION_ID,
 95               SUBINVENTORY,
 96               FROM_ORGANIZATION_ID,
 97               FROM_SUBINVENTORY,
 98               EXPECTED_RECEIPT_DATE,
 99               SHIPPED_DATE,
100               VALIDATION_FLAG
101  )
102  VALUES
103       (v_e,                                          --Header Interface ID
104       v_f,                                          --Group ID
105       v_g,                                           --Interface_transaction_id
106       'RECEIVE',                                       --Transaction Type
107       sysdate,                                      --Transaction Date
108       'PENDING',                                    --Processing Status Code
109       'BATCH',                                      --Processing Mode Code
110       'PENDING',                                    --Transaction Status Code
111       120,                                          --Category ID
112       2,                                           --Quantity
113       sysdate,                                     --last update date
114       1053,                                        --last updated by
115       sysdate,                                      --creation date
116       1053,                                           --created by
117       'INVENTORY',                                  --Receipt source Code
118       'INVENTORY',                                  --Destination Type Code
119       'DELIVER' ,                                    --AUTO Transact Code
120       'INVENTORY',                                  --Source Document Code
121        'Each',                                     --Unit Of Measure
122        'RCV',                                       --Interface Source Code
123        2492,                                        --Item ID
124        --'ABBY KITCHEN CURTAIN SET BEIGE/BURGUNDY',   --Item Description
125        'EA',                                       --UOM COde
126        1053,                                       --User
127       v_c,                                         --Shipment Header ID
128        v_d,                                        --SHipment Line ID
129        82,                                           --To Organization ID
130        'Brooklyn',                                     --Sub Inventory ID
131        81,                                            --From Organization
132        'Vessel',                                      --From Subinventory
133        sysdate,                                       --Expected Receipt Date
134        sysdate,                                      --Shipped Date
135        'Y'                                           --Validation Flag
136      );
137  --END IF;
138  END LOOP;
139  END;
140*     END xxc_lc_rcv_interface_prc;
SQL> /

Warning: Procedure created with compilation errors.

SQL> sho err
Errors for PROCEDURE XXC_LC_RCV_INTERFACE_PRC:

LINE/COL ERROR
-------- -----------------------------------------------------------------
14/2     PLS-00103: Encountered the symbol "SELECT" when expecting one of
         the following:
         begin function pragma procedure subtype type <an identifier>
         <a double-quoted delimited-identifier> current cursor delete
         exists prior
         The symbol "begin" was substituted for "SELECT" to continue.

141/0    PLS-00103: Encountered the symbol "end-of-file" when expecting
         one of the following:
         ( begin case declare end exception exit for goto if loop mod
         null pragma raise return select update while with
         <an identifier> <a double-quoted delimited-identifier>
         <a bind variable> << continue close current delete fetch lock
         insert open rollback savepoint set sql execute commit forall
         merge pipe purge

Not before the CURSOR, but before the SELECT INTO after the cursor...

  CREATE OR REPLACE PROCEDURE xxc_lc_rcv_interface_prc IS
  2      v_a    NUMBER;
  3      v_b    NUMBER;
  4      v_c    NUMBER;
  5      v_d    NUMBER;
  6      v_e    NUMBER;
  7      v_f    NUMBER;
  8      v_g    NUMBER;
  9
 10   CURSOR rcv_interface_cur
 11   IS
 12   SELECT shipment_header_id INTO v_c
 13   FROM RCV_SHIPMENT_HEADERS
 14   WHERE SHIPMENT_NUM = 'NOV1124';

  

 15   SELECT shipment_line_id INTO v_d
 16   FROM RCV_SHIPMENT_LINES
 17   WHERE SHIPMENT_HEADER_ID = v_c;
 18     SELECT rcv_headers_interface_s.nextval INTO v_a FROM dual ;
 19     SELECT rcv_interface_group_s.nextval INTO v_b FROM dual;
 20     SELECT rcv_headers_interface_s.currval INTO v_e FROM dual ;
 21     SELECT rcv_interface_groups_s.currval  INTO v_f FROM dual;
 22     SELECT rcv_transactions_interface_s.nextval INTO v_g FROM dual;

 

 23  BEGIN
 ...

Pending transactions

Similar Questions

Maybe you are looking for