Percentage bar

Similar Questions

• I can not load a copy of Outlook 2003. He goes to ask at what level I would install, now says the facility and then does nothing. The percentage bar is completely grey. __

  Outlook 2003 will not install. Also Office 97 (don't laugh!) will not uninstall and I can't delete the 'Office' in the folder programs.

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Bar with percentages chart

  I'm on APEX 4.2 and want to create a 3-d percentage (instead of County) bar graph. The wizard gives only an option for a tank stacked percentage bar. My SQL returns the account and I thought I could use the '% YPercentOfSeries' option on the XML list. I was able to get to the screen to indicate the percent correct in putting that in the < label_settings > section (see below), but the bar heights legend and axes are based on the number of counts. Any ideas?

  < label_settings enabled = "true" mode = "Outside" multi_line_align = "Center" >

  format <><! [CDATA [{% YPercentOfSeries} {numDecimals:0} %]] > < / size >

  < background enabled = "false" / >

  < font family = "Tahoma" size = "10" color = "0x000000" / >

  < / label_settings >

  Rather than return to the counts of the query, you can return to the ratio_to_report, which is the percentage regarding the report.

  Instead:

  Select deptno,

  count (*) c

  of the Department

  Group of deptno;

  Try this:

  Select deptno

  ratio_to_report (Count on ratio)

  dept group by deptno;

  Then you don't need to do something special for the chart.

• progress bar jQuery UI in the apex report rows

  Hello
  
  Anyone know how I can display the progress bar from jQuery UI in each line of a report to the Apex 4? Each measure must the length according to the value in one of the columns.
  
  Thank you.
  Andy

  http://www.talkapex.com/2009/06/displaying-percentage-bar-in-apex.html

  Does that help?

• HP 15-af114AU: Windows 10 installation stuck after formatting

  Hello everyone.
  I have format my computer windows laptop 10 Hp 15-af114AU. After the computer reboots, it was installing windows when my battery went dead. So when I turn on the installation was 67% with the message of two State below the percentage bar which reads, installing features and drivers (highlighted in blue) and the other configuration settings message. The installation seems to be continuening with the percentage up to 98% and it recharges much more and still looks as the same process that is going on there. I need help on how to proceed with this issue.
  
  Thank you

  Please reread my post and answer the question I asked you.

  Use of troubleshooting on the web HP document to the address following

  http://support.HP.com/us-en/document/c03483233

• Sansa Fuze does not turn. * Officially solved! See post 7 in thread for answer! *

  OK, so I put a video that I made using the Sansa Media Converter. I made the video in one. AVI using SUPER and put the file in SMC. I waited on hidden. I'll be back and conversion was hung and stopped at 74. It wasn't a huge deal. It's happened before. I decided to come back in a bit to see if it continues the conversion. When I came back, my drive was off and the percentage bar had not moved. I removed the player and tried to turn it on. It turned on and "refreshed media." Immediately after, however, it stops immediately. I tried a soft reset (button / waiting for 15-60 seconds) and he came for a few seconds only to stop again. More funny thing is though, it actually stopped by itself. He even went to the screen 'goodbye'. Now it won't even turn. He lights and turn off by itself. Sometimes I can turn on soft reset, only that it is black screen. Even when I plug it to my computer, it will be either turn on, black screen after a few seconds or not at all.

  Player: Sansa Fuze 8 GB

  Computer OS: Windows XP SP2

  Firmware: 1.01.15

  Please, I beg you. This will be my second player perfect condition which has out crapped on my Sansa. I had an e2600 who had a hard drive failure after only 8 months. If I have a solution that States "buy a new player", I'm afraid I have to leave Sansa.

  Any help will be greatly apprieciated.

  Very well. I think I finally found the problem of this. The problem seems to lie in the SCM. It seems very harmful effects if during a conversion process, the computer transfers to virtual memory. An update of the firmware seems to correct this problem. Again, I will never video convert on this computer.

  I'll give this time, Sansa. Is not your fault.

  thread

• OfficeJet Pro 8600: Uninstalled the printer driver and now can not download it from the Web site!

  The error message "printer is off-line" showed a day all of a sudden

  I tried to download the driver of scanning and printing doctor as suggested help forum, never downloaded.

  The download (or Install) window presented with percentage bar.

  but the percentage remains at 0% for 10 minutes.

  I thought that something was wrong with the Scan Doctor

  I decided to take the alternative; uninstall the current printer driver in my computer (computer laptop HP 'Pavilion', Windows8).

  I uninstalled it then tried to download the same driver on the HP site.

  It is same as the pilot of scanning and printing doctor;

  same window, "0% download" forever.

  Now, I'm totally at a loss. Have what wrong I done?  How can I make my printer work again or how do I know what is the problem?

  The driver is big enough, I would say save to disk, and then run the installation program.  You could do a right click on the link here, select "Save as", then download the file.  Depending on your internet speed, it make take some time downloading.  If it doesn't for you please specify exactly what is happening when you try to download the file, and any error messages see you.

• Smartphones from blackBerry Pearl 9100 keeps restarting over and over again

  Hello

  Less than a few months ago, I had a new Pearl 9100. Two days ago I had to remove the battery and after I put the battery back on, the phone started to reset itself. It is the red light on the top right the start screen of Blackberry with white line where you can guess how much of the OS has loaded (percentage bar?)

  It loads about 1 to 2% of the bar and then it resets. I tried to reload the OS according to the scheme instructions on this site, but it is not possible, since the phone is not long enough for the upgrade.

  Any help will be greatly appreciated.

  Kind regards

  J

  Have you tried these steps to recharge your device software?

  1. check that the Desktop Manager and BlackBerry Device Software are installed on the computer.
  2 remove the battery from the BlackBerry. Do not re - insert.
  3. connect the BlackBerry to the computer.
  4. in the main screen of BlackBerry Desktop Manager, click on Application Loader.
  5. click on start.
  6. click on Options to select the applications to install.
  7. click on next.
  8. click Next.
  9. click on finish.
  10. when the load of the application starts, reinsert the battery into the BlackBerry.

  Thank you

• FAILED: A general error occurred: unknown exception

  Hello
  When I try to convert and join physical machine to VMware ESXi Server Infrastructure I got this error: "FAILURE: a general error occurred: unknown exception.
  There are status "Race" at the moment (but does not show percentage bar) and then "A FAILED" is displayed.
  I've added screen captures and logs as an attachment.
  Please help me

  Youe error is

  2012 04-25 T 11: 34:31.195 + 02:00 [info 01340 'Default'] [, 0] Vmount library: 2 error while opening the control device of the driver VSTOR2

  Try to uninstall and clean install the converter 5.

  If the error occurs again, check the status of the pilot VSTOR: "sc qc vstor2-mntapi10-shared '.

• Adobe Audition CC does not recognize the VST plug-ins.

  Hello

  I have been in charge of research and searching across countless articles and YouTube videos online, but I still have to find an answer to my question. I intend to use VST in the near future and have been downloading sample some VST plug-ins. To answer the question, I checked all the and they are all 64 bits, which is how my system is put in place, but when adding folders where my files are VST. the program scans (and reading them - like the percentage bar loads it displays each file name), but then does not appear any of the effects. My question is: what is the problem? And if there is anything I can add to that which would be, I don't know much about VST but files are (.dll), is this the right/intelligible to the hearing?

  VST files are piano effects intended to be used with a MIDI device.

  Thank you!

  They are actually the VST effects. If they want to do with music and MIDI instruments, they could be VSTi (VST Instruments) that does not support the hearing. Can you tell us the name of the person that you tried in vain?

• GridItemRenderer does not update on the updating of the data

  I have a DataGrid with 4 columns, 3 using GridItemRenderer.  The data to the DataGrid control are divided into a number of pages depending on the size of the grid and the amount of data.

  The last 2 GridItemRenderers use a custom component that draws a percentage with the amount of the percentage bar.

  

  When the DataGrid control is imagined, work of GridItemRenderer of the 1st great column.  It changes color based on a value.

  The 2 last GridItemRenderers do not display anything.  When you click on the second page, it displays, however the first line does not show the value of the text.  When you click on another page, then the previous pages drawing values cover the current values.  that is, he draws the percentage bar based on the values of the previous line.

  Initial page

  The 3rd column is empty.  I tried to put the percentage bar drawing information directly in the GridItemRenderer, but it appears that for the first row.

  

  Second Page

  When loading the second page, it shows the bars, however, the values are disabled.  The red in the 100% bar is for another bar.

  

  First Page Reloaded after click navigation

  Navigate to the first page only gives wrong results as well.  The first line is missing in the percentage value.

  

  The GridItemRenderer is quite simple.  I overrid data function to add information.  I even tried a few Invalidate methods to see if that might solve the problem.  There can be no.

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:GridItemRenderer ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  xmlns:DeanLogic = "com. DeanLogic.*.

  Width = "100%" height = "100%" >

  < fx:Script >

  <! [CDATA]

  override public function set data(value:Object):void {}

  Super.Data = value;

  if(value == null) {}

  return;

  } else {}

  var thisPercentage:Number = new Number (data ["CurrentMonthPercentage"]);

  monthBar.setBar (Math.floor(this.height *.99), Math.floor(this.width *.99), thisPercentage);

  }

  super.invalidateDisplayList ();

  super.invalidateProperties ();

  }

  []] >

  < / fx:Script >

  < DeanLogic:PercentBar id = "monthBar" / >

  < / s:GridItemRenderer >

  I decided to just use FlexGlobals to solve the problem.

  Overall, I put the width and height values.  By default the height and the width is after that the screen's size.

  dataGridColumnWidth = Math.floor (siteDataGrid.width *. 25);

  Then, in the DataItemRenderer, I used the FlexGlobals for the height and width.  I left the if statement else in there, just in case there is a solution.  But I probably should get out.

  Import mx.core.FlexGlobals;

  override public function set data(value:Object):void {}
  Super.Data = value;

  if(value == null) {}
  return;
  } else {}
  var thisPercentage:Number = new Number (data ["SevenDayPercentage"]);
  If (this.height! = 0 & this.width! = 0) {}
  sevenDayBar.setBar (Math.floor(this.height *.99), Math.floor(this.width *.99), thisPercentage);
  } else {}
  sevenDayBar.setBar (Math.floor (FlexGlobals.topLevelApplication.dataGridRowHeight *. 99), Math.floor(FlexGlobals.topLevelApplication.dataGridColumnWidth *.99), thisPercentage);
  }
   
  }

  super.invalidateDisplayList ();
  super.invalidateProperties ();
  }

• Return an image to its original size?

  Hello world

  When you try to sort the page layouts in indesign, I very often zoom photos until they fit properly on the page. But is there a way to reset the original size of the image without having to re - import when I want to try a different size?

  Thank you

  Chris

  Edit > Preferences > General > during the measurement: adjust scaling percentage.  I suppose that some users have a reason, but I do not understand why it is not the default value anyway.

  Then when you resize it the percentage bar will show how much is climbed by.  To get it to how it was originally simply use the menu drop-down and click 100%.

• Cannot update 11.0.1

  Recently I download Flash CS5 11.0.1 update and start the AdobePatchInstaler.exe the percentage bar and label just do not reach 100%, stay on 0% then just update say that flash is updated then now, I opened flash, select help > everything... and still saying 11.0.0.485 version. I tried the update of Adobe and don't show this update.

  Any ideas?

  The two computers are on the same network. The update worked fine on the laptop, but failed on the desktop.

  On the desktop, I did the update of FlashBuilder 4.0.1 via Adobe Application Manager; No manual updates have been applied to this machine at any time. I was concerned by the lack of updating Flash because I knew that it should be available, because I had it applied successfully on the laptop. That's what prompted me to go get the manual update in the first place.

  A related note, I wrote this reply, I have updates for Photoshop and Dreamweaver on the laptop. Application Manager indicated that two updates have been applied successfully, only Photoshop displays the new version number in the start screen and help > on. Dreamweaver always reports the number generation 11.0 original 4913.

  And yet, when I check the updates on the desktop, the Application Manager reports that everything is up to date!

  I'm beginning to wonder... are the help > about and splash screens hurt? I had a similar problem with Flash Builder Premium downgraded to the standard after installation of CS5. I read somewhere that the content of the splash screen may have been cached.

  And get this! I just checked the laptop where 11.0.1 has been applied with success through the application manager. Help > about now reports version as 11.0.0.485. Yesterday was show 11.0.1. There must be a bug in version CS5 notification mechanism.

• Display the battery percentage in the notification on my Moto G4 more bar?

  Hello.

  How do I display the battery percentage in the notification bar?

  Moto G4 more, Android 6.0.1.

  Thanks in advance.

  Touch and hold for a few seconds, the gear icon that appears on the top of the notification Panel (to the right of the battery power indicator)

  You'll get what you need after having followed the steps above and then visit the 'UI Tuner system'.

• Is it possible to display the percentage of battery on the bar using settings of tasks Lenovo?

  I have a Lenovo z51 on Windows 10 and I want to be able to look at the task bar and immediately know the percentage of my battery without my mouse hovering over him who has the white battery option by default.

  One of my friends with a ThinkPad has this option and the battery meter is very similar to the option of OneKey Optimizer (OKO). I want to know if I can do something similar with my ThinkPad laptop - not for I can remove OKO.

  If you open the program called Lenovo settings > Gear in bottomleft corner > activate the battery meter.