Sansa Fuze does not turn. * Officially solved! See post 7 in thread for answer! *

Similar Questions

• Sansa fuze will not turn on or charge

  My sansa fuze was working fine until one day when he suddenly cut off and since it lights up for about 10 seconds and cut again once

  Time of a call to the Technical Support Center of SanDisk. If they can't get you Goin ' again, they can get the replacement to the title of their current 1-year warranty.

  Note: SanDisk is in the middle of changing over their customer support to a new system, so it may take a little longer than usual to get your replacement, if necessary.

• Sansa Fuze does not work with the Xbox 360?

  I know that the console is capable of playing a MP3 player through it, I could do my job as Creative Zen. I don't understan why it does not work with the "rocket", the interface looks more simple on the surface of things. And I'm sure it doesn't because I don't have a HARD drive for my Xbox, it was working fine before.

  The reson I am, I wanted to know because I wanted to know the other ways of playing my rocket while listening. the kool on my expirimentation thing is I found that the Xbox will charge my rocket when it is off and I can listen at the same time. I also found that my Playstaion 2 will work also in this copacity all-in-on.

  Basically the Auto setting works well with the XBox.  Select settings > USBMode > MTP or MSC.

  With PSG, you can even play content protected by DRM rockets (IE Rhapsody) on Xbox.

• Sansa Fuze does not work

  I was listening to music 2 days ago and suddenly it just froze and shut. The screen is black, the blue ring does not, and it shows the computer as an unknown device. I got my rocket since December. Please help me. I tried to reset the player for 15 seconds, 30 seconds, all the way up to a minute. I have had no success. I have version 8 GB Silver 2.

  You can try this suggestion.

• Sansa Fuze does not illuminate

  I didn't witness it turn off, but since he did, he will start. It was to be kept and used as it would normally be, and my attention was taken out of it for a few seconds. I went to use it again, and it was off. I tried to turn it back on, and it wouldn't work. I plugged it in with the usb cable from my computer, but it won't always turn, nor the computer recognizes it as what it is. Basically, it's like nothing is plugged at all. Since there is no accessible screws, I can't remove a battery or something like that.

  What should do?

  I solved the problem! I held the button for about a minute and then just tried to turn it on normally right after and I works fine now

• Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  Hi all

  Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  I need software to convert mp3 to flac, please guide me because I want to test flac on sansa clip

  Thank you

  He plays very well FLAC.  There is probably a problem with your files.  They are not coded correctly, or you use the ID3 tags.  The Clip only supports normal Vobis comment tags to FLAC / Ogg.  Mp3Tag should be able to fix your labels if that's the problem.

  In addition, there is no reason to convert MP3 to FLAC.  It will sound the same as the MP3, but you will have much larger files.  If you want to get the advantage of FLAC (or any lossless format) you will need to rerip your CDs.

• printer does not turn on

  My Deskjet 6980 printer has stopped working.  It has worked very well so far. Flashing lights said he needs ink. I put in the new ink. Now, it won't turn. The power supply is turned on, the works of output (without surge protector), but the printer does not turn on. In all he has no light on the printer, except light power cord in the back. I tried everything I could find online, but nothing works. My computer was still recording the printer, but since it will not power, says that it is in offline mode. Any suggestions would be helpful.

  The unit may have developed a power failure, but may be also simply in a State of error because of the fresh cartridges.  There are a few steps, I'll try in this case of troubleshooting.

  * If possible, try to remove the cartridges that you recently installed before performing a hard reset of the printer.

  * Hard reset of the printer by unplugging the device, disconnect the other end of the power cord from the wall outlet, separates the power cord of the power supply, wait 30 seconds and plug it back up.

  See also the steps described in the document, found here, to solve a lack of power.  I hope this helps.

• A Wi - Fi connection does not turn off correctly

  When I turn off Wi - Fi in the quick toggle or settings page it does not turn off and it is left running. (I have not 'analysis always' either) I can see in the graph of the battery when I turn it off for a while it always shows the green bar on Wi - Fi. I had this problem on 5.1 on my 4g (2013) g bike and I don't always.

  This seems to be a matter of google - I have it on non-Moto phones as well. The only thing to do is to restart with the Wifi turned off.

  I don't remember if disable the Wifi in the precision of the GPS solves this problem or not. I decided to live with it for now.

• Inkjet HP cm1415 rolls does not turn

  My friend has an inkjet hp cm1415 and the ADF does not feed...
  

  When turned on it goes through the cycle and can see
  

  What happens up there, but the roller does not turn
  

  to feed the paper.
  

   

  The roller before going up and down when you turned
  

  It's on.
  

   

  But put a paper in there and press copy makes a
  

  copy is as the paper does not feed.
  

  If the reset does not solve the problem, I suggest to call HP @8004746836 and see what options we have to replace or repair the unit.

• Spectrum X 360: New spectrum X 360 does not turn the screen into tablet mode

  My spectrum is only two weeks old and works wonderfully as a standard notebook computer.

  However, I cannot get screen to turn when I select tablet mode or Flip on the stand of entertainment.

  All the research online, I can find are people who used Win 8.1 and is updated to Win 10.

  Mine came with Win 10 pre-installed.

  None of the screens settings they advise to go to exist.

  I also checked the registry and its game properly.

  Windows 10 made the anniversary update a few days in me starts to use it so I don't know WHETHER or not the rotation number was there from the beginning.

  I solved my problem re. the screen does not turn in tablet mode.

  Yesterday, I installed HP Support Assistant in the hope, he suggests a solution.

  It didn't at the time, but it made me on this forum where I see that many others had similar problems.

  Today, when I turned on my laptop I noticed that support Assistant has a list of available updates.

  the first who has updated automatically has been updated for HP Notebook System Bios (Intel processors) which, after installation and reboot I had not really noticed any difference.

  Among the list of updates has been 'Intel Integrated Sensor Solution Drivers'

  Because I couldn't find any menition of sensors in my device manager, I installed it.

  Now I have the "Lock Rotation of this view" option may be greyed out there but at least now it.

  Still no spin so I started to double check every thing once again and found that I had a new entry in the registry... Sensor

  present.

  However Enable is set to 0 instead of 1

  

  I changed the 0 to 1 and here I rotation.

  However the only question now is the Rotation options buttons are greyed out, but I still can auto rotate when I flip to the tent, entatainment or tablet mode.

  At least, that my X 360 so that its name and what I bought it for.

  Fact my research I love the lack of rotation is not a specific HP problem but a problem of Windows 10.

  If other problems persist, try to reduce your search settings to fail to win 10 to rotaate, you will see a lot more information out there.

  Thanks to everyone who tried to help me. I hope that my message will help someone else.

• Computer does not turn on: disk boot failure

  Start the computer on this morning and it went to the disk boot failure.  He asks for disc to enter.  I can't find the vista disc.  Turned computer turned off and rebooted did the same thing.  Turned computer turned off and when he returned to the subject went to blue screen during a short period of time.  I have tried F11 nothing.  the only thing that would do anything has been hitting the Esc key.  now, I'm in the start menu.  He is asked to select the first boot device.  Group of HDD or CDROM group.  Not sure should I choose? Help, please!

  Original title: computer does not turn on

  Hello

  ·          Were you able to start the computer in Safe Mode?

  Step 1: Make sure that the disk group is selected as first boot device. Unplug all external USB devices, then try to restart the computer.

  NOTE: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Try startup repair if it is an option of recovering preinstalled on your computer.

  See: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  See also: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

• BlackBerry screen Smartphones Torch 9850 does not turn

  Hello

  I got a new Blackberry Torch 9850 and noticed that the screen does not turn when the phone is held to the side. Compass calibrate as well.

  I have updated to the most recent software available - 7.1 Bundle 1737 (v7.1.0.580, platform 5.1.0.429).

  Did not help at all. However, I accidentally found that the screen turn to a landscape position if the phone is quite strongly shaken. So that means accelerometer should work somehow, simply not properly.

  Any ideas how to solve this problem?

  Thank you in advance.

  Hello and welcome to the community!

  Please try to start safe mode:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  You will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient and you may need to try a few variations of what shows the KB. When properly in Safe Mode, see if the behaviour persists (I suspect it will, but it's worth the test). If so, then go back to your place of purchase or warranty provider that something is wrong at the hardware level, for which no amount of software, OS, or Internet-remote diagnosis can help.

  If the behavior does not persist in Mode without failure, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  Good luck and let us know!

• Screen does not turn off automatically

  Hello

  I have problems with my display does not turn off automatically (for example, after 3 minutes of inactivity). What is happening is that the display actually goes to the maximum brightness, even if the screen indicates that the brightness is set to 0.

  Should which driver I update to solve this problem?

  Thank you

  Ok. I decided to uninstall AMD video drivers and reinstalled them. Now its working as it should.

  See you soon...

• Satellite PRO U300 does not turn off

  Hello

  I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

  The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

  Some details of my pc are as under:

  Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
  BIOS Version V2.00
  Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

  Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
  Thank you

  JITENDRA

  Hello

  I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

  Power on / off LED is probably what you mean (the other starting on the left).
  Anyway, you turn off your laptop using a standard on the Start button?
  Are you sure you want to use the Hibernate mode.

  Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

  Have you installed something 4 days ago? Or deleted some important application?
  Sorry, but it is not easy to say with certainty what the problem is here.

• Does not turn my Iphone 6? /

  I own an iPhone 6 and I have for a year now. I turned off my phone a few hours ago and went to turn it back to the and it does not work. The apple logo appears, but the screen turns off after 5 to 10 seconds of the projected apple logo. I tried pressing the two keys and I also tried to connect my phone to itunes but it doesn't connect either.

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/