Percentage of the speed?

Hello, I have a question about the speed/slow motion. Is it possible to adjust the speed of the not in the conventional way through time remapping (framing key to the specific points in time), but with a percentage, like Twixtor speed? This makes it much easier for my purposes.

I don't need to all new managers, I just have a clip of 50 fps that I want to play at exactly 50% speed, then speed up to e.g. 150% once again, slowly up to 70% and so on. Which is really complicated using time remapping only. I would use Twixtor but like Twixtor is a plugin to create new images between 2 images for smooth motion Super slow at 60 fps, for example, the result is quite warpy because twixtor attempts to create new frameworks although the original offers enough frames to be smooth.

I hope that my question is understandable, it's a little hard to explain.

Have you looked at the graph Editor. If reveal you the reference chart and change the value graph you can then place the cursor on the speed graph and see the report of the seconds / second. If you see 1.0 second per second then your film play real-time bit matter than the frame rate. Here I am flying over the first line segment.


If I hover over the third line segment I get 0.5 second per second or half speed. A second real-time takes 2 seconds of screen time:

The faster parts attached is hovering above the apex of the speed variation. The graph of speed shows 4.78 seconds per second, therefore 1 second of real time takes about 1/20 of a second of screen time. It's math simple.

So that's how you can use the graph Editor to make changes of speed. BTW, the curves have been achieved by pressing the G key to bring up the pen tool, then placing the cursor on the key frames and now the Alt/Option key to drag the Bezier handles on the value graph. Some people I know prefer to change the speed graph, but I find it easier to work with the value graph. Either will work.

If you want to drive the gear shift with an expression that is controlled by a slider you can use speed controller Dan Ebberts expression directly. A value of 1 slider will give you real-time, a value of.5 slider will give you a second of real time equal to 2 seconds of screen time or a 50% speed. To make things easier to edit and see in the graph Editor, that I threw in a multiplier for 100 you would give 50 and in real-time would be half speed. Type of transforms the cursor to a percentage slider. The expression looks like this:

"SPD = effect (speed Control")("Slider") ";

n = spd.numKeys;

If (n > 0 & .time spd.key (1))<>

Accum = spd.key (1) .value * (spd.key (1) .time - inPoint);

for (i = 2; I have<= n;="">

If (spd.key (i) .time > time) break;

K1 = spd.key(i-1);

K2 = spd.key (i);

Accum += (k1.value + k2.value) * (k2.time - k1.time) / 2;

}

Accum += (spd.value + spd.key(i-1).value) * (time - spd.key(i-1).time) / 2;

} else {}

Accum = spd.value* (time - inPoint);

}

value + accum*.01

This is a preset that will add the slider to a layer, activate the time-remapping and speed in real time. Dropbox - time Remapp speed Control.ffx

I suggest that you record on your user presets and very practice. I use it all the time for the time remapping effect. In many cases, it's easier defining a bunch of keyframes and dragging things around.

Tags: After Effects

Similar Questions

  • Having more than one user affect the speed of my MacBook Pro?

    I have a MacBook Pro, which is now painfully slow 2011.

    I have three users each journal entry/exit in the required form.

    Having more than one user affect the speed of the Mac or not?

    Thank you

    If you open a session there should be no impact.

    You can view a report of etrecheck for more Analytisis

    www.etrecheck.com

  • What is the speed of the hard drive of the 2015 2 and 3 to merge disks partition?

    I was looking through the Apple site and was wondering about the speed of the drive in the iMac in car merger. On their site it says that the 1 TB Fusion drive has 24 GB of Flash memory, and 2 models to and 3 to have 128 GB of Flash storage. But it does not say what the speed of the hard drive partition, which is what I want to know. It is 5400 RPM, or even 10000 rpm or 7200 RPM? I don't know, but I want to know. If anyone here knows the answer to this question, I would appreciate a response. Thank you.

    I have seen it reported that the Fusion drives are all 7 200 RPM.

  • Software updated 2 days ago. He stuffed the speed up to a point, I had to borrow someone's HP to complete a task. Very disappointed

    I updated my software for macbook pro 2 days ago, which has been for his security etc.

    After the update my macbook snaps every minute and the speed it exceptionally slow to a point as I sit for 5-10 minutes waiting to open finder or safari to open. This update plush speed of my macbook. He now works at all. Display and all that remains is very good.

    I have an important assignment due this Friday, fortunately someone lent me their HP to complete my task.

    very sad and disappointed with this, Apple.

    Please provide a solution.

    Thank you

    kitss

    Download and view a report of Etrecheck:

    http://www.etresoft.com/etrecheck

    Ciao.

  • Fake screenshots on links youtube video and the speed of the links dials.

    Firefox displays wrong pictures on video links and also wrong dials for the speed dial add-on. Problem goes away after focusing on the problem of link.
    If restore system - everything very well. If then updated firefox and (or) flash - problem reappears.

    Thank you!

    Start Firefox in Safe Mode {web link}
    While you are in safe mode;

    Type of topic: preferences #advanced< enter > in the address bar.

    Under Advanced, select General.
    Find and stop using hardware acceleration.

    Search web sites secure. Are there problems?

  • I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

    I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

    What do you mean, your message is not clear.

  • What can I do to improve the speed of download on my Mac

    My Mac Air is very slow in the download of some sites.

    Your download speed depends on your internet connection speed and the speed of any site you download from. There is nothing you can do if a particular Web site is slow.

    SpeedTest allows you to check your internet speed.

    http://www.Speedtest.NET/

  • Change of modem can improve the speed of Airport Express Extender?

    My router is a Airport Extreme 6th Gen.

    When Wi - Fi and close this Airport Extreme base station, I get average speeds of:

    117 Mbps down and > 11 Mbps upward

    At the opposite end of the House, I use a wireless extension: Airport Express 1 St gen - model A1264 (MB32 1LL/A)

    Here, the download speed goes up to 14mbps

    Download speed rest > 11 Mbps

    My ISP will not have my current cable modem: 6580 Motorola (jumpered to disable router) to provide speeds greater than 100/10 (though even I can actually slightly higher than average, I have indicate above).

    If I replaced the modem with my ISP (Time Warner Cable) provisions for 200/20Mbps (speeds I pay in fact) - and * if * I got then that 100 Mbps speed increase (wireless) when close to my Airport Extreme base station (and I think I'll) - should I then expect to see a significant speed increase at the opposite end of the House , where I rely on the Airport Express wireless extension?

    In other words, is expected to double the speed of my modem now gives me wireless (when you're on my Apple Extreme base station) also be reflected in an increase in speed at the end of the House where I must rely on the Express Extender 1 generation and where I am now only download speeds see 14Mbps?

    BTW:

    1. I can not move my extreme or my Express.  They both must stay exactly where they are. Neither can they cannot be permanently interconnected via ethernet cable.

    2. I don't think the speed reduction I describe is a bandwidth issue because I am the only one on the network and do not have multiple downloads on several devices at the same time.

    Before I ring $$$ on a modem that won't improve my speed, you will appreciate any guidance I where I need more.

    Change of modem can improve the speed of AirPort Express Extender?

    Just a little, at best. The Express pourrait spend 25-30 Mbps. No guarantee, with strangeness wireless... it is maybe the same or worse based on my experiences.

    If you need more speed at the end of the House... the AirPort Express must be located to half way between the AirPort Extreme and the end of the House. Ideally, he would have line-of-sight with AirPort Extreme.

    Yet, you say that you can not move the Express or the extreme and can't get the Ethernet cable. Have you considered or tried Powerline Ethernet adapters?

  • New version, want to come back to the previous download box, a new has no history and does not show the speed of download, how to get back?

    They are in the question. I was very happy with the old download box, I have a mac, so when I got the new update of firefox, I was very surprised to see I cannot look through old downloads and can not see the speed in which the file is downloaded, it is not sensible cut options off...

    Note that Firefox 20 can also open the topic: downloads page in a tab (see also about: on).

    You can set the Boolean pref browser.download.useToolkitUI true on the topic: config page to restore the old Download Manager window.

  • Slow down the speed of the Internet with TC Gen 5 and Time Warner Modem

    I use the 3 TB Gen 5 Time Capsule and Time Warner Cable Modem. Recently, TWC has increased the speed of internet download at 300 Mbps. using TWC speed Test I get about 95 not only when you're using TWC Wi - Fi, but also when my iMac is directly connected to the TC by ethernet. I get almost 300 Mbps when TWC Modem is connected directly to the iMac by ethernet. I'm surprised that the speed of WI - Fi is nearly one-third, but more surprised than speed is also a third when connected by ethernet. I don't understand how the TC and TWC modem work together. My use of TWC rather that TC Wi - Fi Modem Wi - Fi has been recommended by Apple Support when they helped put in place the TC about six months ago. I don't know what I should be waiting. TWC has replaced the cable Modem so that is not the culprit. TWC also said speed of 300 the Modem must be connected directly to ethernet to the computer. There may be a configuration problem or a lack of understanding on my part. To unravel it any help would be appreciated.

    Fixed: using the TWC speed Test I get about 95 not only during use of the TC Wi - Fi, but when my iMac is directly connected to the TC by ethernet.

  • If I devices 802.11 g connected to my network or it will they drag down the speed of the network?

    I have an 802.11n network with more Sonos speakers on this topic. They are only compatible g. I had someone me say that with g on network devices would limit the speed of the other devices on the network to g speeds.  It looks like crap, but I wanted the opinion of experts.

    Not at all the crap. With less capable devices (when they operate) will affect the overall bandwidth of your wireless network.

  • When I try to reprogram video may, I am unable to select the speed. The options are grayed out. How can I activate my options?

    I'm so sorry to bother the community, but I'm on day 30 Final Cut Pro X trail, and I'm a novice, but have some web design background, so not as green... lol... when I try to resync video of may, I am unable to select the speed. It is grayed out.

    How can I not grey this area and choose my speed?

    I have highlighted in yellow video, so that it knows which clip I want change, but I am u can select a speed for example 2 X, 4 X etc...

    Please help me!

    THX,

    Hai,

    You can show us a screenshot of it please?

    Also, try the reset speed option(Option+Command+R). Let's see if that will work or not.

  • How to regulate the speed of the fan on Satellite Pro L650 - 15 c?

    I can regulate the speed of the fan in my laptop (Satellite Pro L650 - 15 c)?

    The reinstallation of Windows 7 the fan is always moving up. How can I set this fan?

    greeting of the developing countries

    Hello

    Open windows power management and settings for the management of the power supply you use. You will find the advanced power option. Open it and you will find Toshiba power saver options.

    Open all the available option and check the settings of the cooling method. Set to optimized battery option.
    This should reduce the speed of the cooling fan.

    Please test and validate the results.

  • Speed/performance of my mac mini (mid-2010) is very slow. Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.

    My mac mini (mid-2010) speed/performance is very slow - think of it as a result of letting my kids do "whatever" about it in recent years.  Need help, consolidate the files, software updates, etc. in order to improve the speed and performance.  You will also need to get data out of old PowerBook G4.

    < object edited by host >

    We are users like you.  Search locally by using something like Yelp or similar

    http://www.Yelp.com/search?find_desc=Apple+repair & find_loc = Chicago, + IT & start = 0 & ortby = rating s

    or read a few links which may be relevant on this forum about the slow mac mini

    http://BFY.tw/5C63

  • address bar after installation of the speed dial

    After you have installed the speed dial extension with firefox 6.0, my address and search bar disappeared. I am using windows 7 ultimate.

    Solved! Go to view - Toolbars - Customize. When the open Personalization window, click Restore Default Set.

Maybe you are looking for