If I devices 802.11 g connected to my network or it will they drag down the speed of the network?

Similar Questions

• net.rim.device.api.io.ConnectionClosedException: Connection closed

  Hello

  I'm "net.rim.device.api.io.ConnectionClosedException: Connection closed" exception so that he was trying to get the response code in the following code snippet. What will be the reason for this exception: -.

  HttpConnection connection=(HttpConnection)Connector.open(url);
          System.out.println("Post-----------------------1");
          connection.setRequestMethod(HttpConnection.POST);
          System.out.println("Post-----------------------2");
          connection.setRequestProperty("Content-Type",aRequest.getContentType());
          System.out.println("Post-----------------------3");
          Hashtable header=aRequest.getHeader();
          if(header!=null)
          {
              Enumeration enumeration =header.keys();
              while(enumeration.hasMoreElements())
              {
                  String headerStr=(String)enumeration.nextElement();
                  String headerValue=(String)header.get(headerStr);
                  //System.out.println("header:"+headerStr+"headerval::"+headerValue);
                  connection.setRequestProperty(headerStr,headerValue);
              }
          }
          System.out.println("Post-----------------------4");
          OutputStream postRequestOutputStream=connection.openOutputStream();
          System.out.println("Post-----------------------4#########");
          postRequestOutputStream.write(aRequest.getPostData());
          System.out.println("Post-----------------------4%%%%%%%");
          postRequestOutputStream.close();
          System.out.println("Post-----------------------5");
          System.out.println("RES CODE:"+connection.getResponseCode());
          InputStream is=connection.openInputStream();
  

  Try opening the InputStream before getResponseCode().

  concerning

• remote device does not accept connections is the error that I also get what is a proxy?

  There are some sites that I can't connect to Internet, I get remote device will not accept the connection and check the proxy. I don't know how to solve this problem, I don't know what is a remote device, and I don't know if I have a proxy. Please help, I work on surveys and freelancing and you need to get to my sites. I thank very you much for any help you can give me.

  This just sounds like your Internet is cut, not a Firefox problem.

  But I'd still Try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• How do I stop sharing incoming/calls recent calls on my OWN multi iOS devices (iPhone 4 6) connected to WiFi even with same OWN Apple ID

  I have iPhone 4 devices 6 sim cards from different countries and of course with my own unique Apple ID and while that for WiFi connections even all devices begins reception even incoming call and ringing all at the same time! In addition the recent calls log will be showing that the calls or calls missed on all devices! … I changed hands and face time and sharing on all devices... but still the same problem any feature that really boring case and mix up my call logs.

  Who told you that it is a feature... OK... I respect your reply and my answer to you that I have the right not to have this great feature on my own multi devices which of course, I use only my same apply id on each of them and I'll connect them all to the same WiFi. then please underestimated that a function can be turned off or the user-controlled means it is not a feature and its name called (BUG)

  I wish I can hear other users with iOS multi devices if they are in need like me do not have any sharing between their devices with their own single apple ID mainly iPhone devices in WiFi even or even not even WiFi... with respect now, it's a problem for a few months and still not resolved and people continue to fight on this issue.

  Thank you

  Osama

  Osama.Hamaydeh wrote:

  Who told you that it is a feature... OK... I respect your reply and my answer to you that I have the right not to have this great feature on my own multi devices which of course, I use only my same apply id on each of them and I'll connect them all to the same WiFi. then please underestimated that a function can be turned off or the user-controlled means it is not a feature and its name called (BUG)

  If you share an Apple ID, call logs will be shared. Some people have reported success to stop this behavior by turning to iCloud by car. If you need this feature, you're stuck with the sharing of call logs, until Apple decides to change the way the phone works. Just because you don't like not the feature does not mean that it is a bug. It simply means that this is a feature that you don't like.

  Submit your Apple here:

  http://www.Apple.com/feedback

• All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.

  Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Laughing out loud

• I just upgraded 5 c to 6 s GSM (o2). I have all new versions of itunes ob both devices. When I connect usb a message:-can't use the iphone "iphone" because he needs a newer version of itunes. Help!

  I just upgraded 5 c to 6 s GSM (o2). I have all new versions of itunes ob both devices. When I connect usb a message:-can't use the iphone "iphone" because he needs a newer version of itunes. Help!

  But you have the latest version of iTunes on your computer?

• Sony Smartwatch 2 - device not detected when connected to laptop computer

  Hi when the connection of my smartwatch 2 in my laptop I get the USB device cannot be detected / no driver error and PC companion doesn't recognize it too. I know this isn't a laptop problem that I connect my Xperia Z tablet and Z1 phone him fine. Any help would be appreciated. Gavin

  The SW2 is not a device that will be detected as a connected external device - updates are performed via an update to the app and apps are done via the phone - so you can not transfer files simply load it via your laptop

• m276n: print from a mobile device using a wired connection on the printer

  Hello

  I am considering buying the printer m276n for use in the home. I have a small Home Office on the top floor of my house which is out of range of my wifi signal but has a wired connection to the same router that broadcasts the wifi signal. I want to put the printer and connect it via a wired connection to the network. I know that it works perfectly for all windows home computers that are attached to the same network (wired and wireless), as long as I give you a fixed IP address to the printer.

  But since we use mobile devices more and more (apple and android) it will be a nice to have to print those as well. I watched Eprint Airprint movies, but all tell me that the printer must be connected wireless. Is it a necessity or my proposed wired installation will work just as well?

  Hi @MartijnS ,

  I see by your post that you would like to know if you can use the ePrint Airprint functionality with the printer and when it is configured on the network via an Ethernet connection. I can certainly help you.

  The ePrint and Airprint feature work when a printer is connected to a network. It can be wired or wireless to the router.

  Here is the document with a little information for print from an Apple Mobile Device.

  The documentation shows also wireless, but again, it works through a wired too.

  I hope this helps.

  Have a great day!
  Thank you.

• BlackBerry Z10 works: "your device is not connected to a network", but the staff is OK

  Good day to all,

  We have a BDS server work with IBM Traveler.

  We have 1 user who, since this morning, cannot receive email.

  After looking around on the traveler and the BDS, servers, we found no manifest error.

  On the phone, we can see that the Internet/personal workspace work perfectly.

  But the BES 'Account' is in the status "not connected" and when you walk inside to examine the configs, we get the red message "your device is not connected to a network. To connect to a network and try again.

  That is, of course, completely false as works of personal data and its other, personal accounts work correctly as well.

  10.1 device.

  We triied what follows (no license):

  -> Stop / start the data on the device.

  -> Stop the data + mobile network > both start

  ->, Restart the phone

  -> Go into airplane mode > back to normal.

  We triied to reproduce the issue with the other 2 phones: both work well. If only 1 phone has the question.

  The BES server shows that, since the beginning of the question, we get this:

  <#03>[30371] (05/23 11:35:39.365): {0xAD4} {John Smith} Packet cancelled locally, Tag = 1520726

  We consider the deletion/re-create the account of a last resort and to explore other alternatives to build our knowledge base... but we are few ideas here!

  Any suggestions?

  Thank you very much!

  Jonathan

  you have the BlackBerry logo next to your connection?

  If not then do a batterypull while the power is on and see if it comes back

  happened twice with me

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How to access files on a removable device that I have connected successfully?

  I am running a vm Centos57 VM Workstation 8 under Windows 7 Ultimate on a box of Alienware.

  After the virtual machine starts, I'm going to VM > Removable Devices and connect my Western Digital external hard drive.

  I know that the connection is successful, because if I go to/dev/disk/by-name, I can see the name of the removable device.

  So far so good.

  How to access files on the drive?

  Sorry to be so stupid, but I'm a newbie, so please inform promptly.  Or, if you're local to Nashville, call me at the 615-613-2123.

  Thank you muchly

  David Halitsky'

  cell 615-613-2123

  [email protected]

  package fuse-ntfs - 3g seems to be missing in your Centos
  read
  http://www.CentOS.org/modules/newbb/viewtopic.php?TOPIC_ID=24079&Forum=37

• Satellite Pro refuses to connect to wireless networks

  Hi guys! I need your help!

  My laptop Satellite Pro has suddenly decided to refuse to connect to wireless networks.
  all except my home router from the sky.

  I have moved since and am not able to connect to the free public Wi - Fi.
  No error message; Just click to connect to a particular network and nothing happens.

  I've been back home since and it connects automatically.
  I have Windows 8 and have not been able to find any trace of the Sky network to deselect etc.

  Any ideas?

  CAL

  > I've been since back home and it connects automatically.
  This means that you can connect to your WiFi network at home without big problems?
  This indicates that s laptop WiFi connection works correctly.

  I put t know what Satellite Pro, you have exactly, but have you checked if you can update the WLan driver?

  What happens if you change the Wlan standard? (802.11 a / B / G or N)
  This can be changed in the Device Manager-> card WLan-> properties-> Advanced tab

• Equium L350D - 11 d connecting to a network wireless after the factory restore

  Hello

  Recently, I've restored my Equium to factory following a virus. I am running Windows Vista Home Premium and it is out of warranty.

  When I try to connect to a network, it is said the computer does not have an installed and configured wireless network adapter. I recommend to install wireless networking equipment and checking that the correct drivers are loaded.

  How can I do this?

  In the PC Diagnostic tool under network, he said: "Realtek RTL8102E Family PCI - E Fast Ethernet NIC (NDIS 6.0) version = 6.2"

  However, in Device Manager, I also have a yellow exclamation beside an unknown device in the section "other devices." It's the only thing that has been highlighted with an exclamation point.

  In the system information section, I found that the vendor for this product ID is 08DA and the device ID is 8197 (usb\vid_08da & pid_8197\00e04c000001). I don't know what it refers to, or why it prevents my find all networks.

  Can you recommend what measures I can take, or divers you think I need to install to correct the problem. I guess I should save the drivers on an external hard drive?

  Thanks for your help.

  Ashley
  [email protected]

  It is really strange this unknown device is listed after recovery image installation. In General, recovery image contains all the necessary drivers, so something like this should not happen.

  Open if please check and if Device Manager card Realtek WLAN is listed under network adapters.
  According to specification for laptop, your laptop has wireless 802.11 network card g (RTL8187B) Realtek driver for this card, you can find and download from Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/

  Please send comments.

• No connectivity after installing Dell 1702 Driver for Wireless Adapter - of the suggestions?

  Hello world

  I'm completely confused on this one and at my wit's end.
  I have an Inspiron laptop M5110 and some difficulties to stay connected to my internet so this morning I decided that I would try to update the drivers. I uninstalled the Wireless and Blue Tooth drivers and reinstalled them, but now it will not even TRY to connect at all. In the lower right corner, there is a red x on the wireless bars and says No connections are available. Previously, it would have a circle of rotation while trying to connect, but that is more than all. My Ethernet connection works fine, I even uninstalled and reinstalled this driver (REALTEK) and his work with no problems. So to publish its specific wireless card...

  If I run IPCONFIG, the wireless card isn't even more appear. I tried to reset, deactivation, all I could think about. I tried several versions too many drivers, but nothing works.

  Right now, I removed it, so I have a yellow exclamation next to the network controller in my device settings. My hardware for the adapter ID is PCI\VEN_168C & DEV_002B & SUBSYS_02051028

  I think the info above, I believe that the Atheros wireless card belongs.

  Have any suggestions at all as to how I can get this thing to even try to connect to a network? I'm dead in the water... ANY idea would be so appreciated. I can stick captures screen or something else, if you think it would help.

  Thank you all,

  Tim

  Timmy1028,

  Zone Alarm because of the systems do not connect. Not very good if you want to continue your connection is allowed, or if you have a product key, for your subscription, temporarily uninstall Zone Alarm.

  The Dell Wireless 1702 802.11b/g/n connects to 2'4 GHz ONLY.

  Places to look to see if your connection is activated

  Also try reading, How to repair a connection

  Go to the drivers & downloads , enter your service tag, and then select your operating system. Under network, download and install the latest drivers.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Click Advanced. Look and see if this adapter has Antenna Diversity. If the adapter Antenna Diversity, change from automatic to the auxiliary voltage (can you also tell me if there or that it has no Antenna Diversity for my notes.) Thank you)

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• Problem connecting Wi - Fi networks unsecured with Windows 8

  Hi all!

  I have problems connecting to unsecure networks that require more authentication via browser thr, as networks of the hotel or Starbucks.
  The networks work wirh all other devices I have, but on my laptop with Windows 8, it doesn't.
  I get a "limited" connectivity and I can't sign on the browser page.
  Why is it so? How can I fix?
  Thank you!

  Hi Emme,

  The issue is limited to any particular Web site?

  This problem can occur because of network settings.

  Try the following and see if it helps.

  Method 1:

  I suggest you to run this utility from the following troubleshooting and check if it helps.

  Network troubleshooting:

  Open the network troubleshooter utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), saving troubleshooting network in the search box, touching or clicking on settings, and then type or identify and fix network problems.

  Resolution of the problems of Internet connections:

  Open the troubleshooter of Internet connections by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click Internet connections.

  Troubleshooting network adapter:

  Open the network adapter troubleshooting utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click on the network map.

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. press "Windows + R" key on the keyboard to open the run window.

  b. type ncpa.cpl, and then press ENTER.

  c. right click on your wireless network connection, then click Properties.

  d. click the wireless networks tab.

  e. under preferred networks, click your wireless network, and then click Properties.

  f. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Refer to the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  Notes:

  Reset the settings of Internet Explorer feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope that the information provided is useful.