Perform calculations between the weeks and categories

Given this example, if I calculate the difference between each week the intention and filing to show in the lines of the plan again and again filing?
Row#     SEM     STUDENT_LEVEL     COLLEGE     PROGRAM     STATUS     Y3W2     Y3W3     Y3W4     Y3W5     Y3W6

1     40     GR     BN     BMA-SJ     14.Intend     132     132     137     139     139
2     40     GR     BN     BMA-SJ     17.Deposit     100     111     115     114     117
3     40     GR     BN     BMA-SJ     20.New Intend     0     0     0     0     0
4     40     GR     BN     BMA-SJ     21.New Deposit     0     0     0     0     0
For example, the value displayed in Col: Y3W3 line #4 deposit must be the result of line Y3W3 2 - Row 2 Y3W2. Digitally: 111 minus 100 = 11.
Tier 4 after that calculation should look like:
4     40     GR     BN     BMA-SJ     21.New Deposit     1     11     4     0     3
If the change is negative, then we would show 0.

There are also some Calc percentage within the week and the categories and between weeks and years, but if understand us this, we can hope that use to others, so we won't post the part yet.

Here's the query portion and sampling data. The sample data are summarized from the level of detail:
WITH ADMLIST AS 
(
SELECT 1 AS WEEKNO, 2009 AS YEAR,          40 AS SEM, 
    'GR' AS STUDENT_LEVEL,  'BN' AS COLLEGE, 'BMA-SJ' AS PROGRAM, 
    '14.Intend' AS STATUS,  139  AS TOT
FROM DUAL UNION ALL 
SELECT 1 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '17.Deposit',    94 FROM DUAL UNION ALL 
SELECT 1 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '20.New Intend',  0 FROM DUAL UNION ALL 
SELECT 1 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '21.New Deposit', 0 FROM DUAL UNION ALL 
SELECT 2 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '14.Intend',    132 FROM DUAL UNION ALL 
SELECT 2 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '17.Deposit',   100 FROM DUAL UNION ALL 
SELECT 2 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '20.New Intend',  0 FROM DUAL UNION ALL 
SELECT 2 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '21.New Deposit', 0 FROM DUAL UNION ALL 
SELECT 3 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '14.Intend',    132 FROM DUAL UNION ALL 
SELECT 3 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '17.Deposit',   111 FROM DUAL UNION ALL 
SELECT 3 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '20.New Intend',  0 FROM DUAL UNION ALL 
SELECT 3 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '21.New Deposit', 0 FROM DUAL UNION ALL 
SELECT 4 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '14.Intend',    137 FROM DUAL UNION ALL 
SELECT 4 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '17.Deposit',   115 FROM DUAL UNION ALL 
SELECT 4 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '20.New Intend',  0 FROM DUAL UNION ALL 
SELECT 4 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '21.New Deposit', 0 FROM DUAL UNION ALL 
SELECT 5 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '14.Intend',    139 FROM DUAL UNION ALL 
SELECT 5 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '17.Deposit',   114 FROM DUAL UNION ALL 
SELECT 5 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '20.New Intend',  0 FROM DUAL UNION ALL 
SELECT 5 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '21.New Deposit', 0 FROM DUAL UNION ALL 
SELECT 6 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '14.Intend',    139 FROM DUAL UNION ALL 
SELECT 6 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '17.Deposit',   117 FROM DUAL UNION ALL 
SELECT 6 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '20.New Intend',  0 FROM DUAL UNION ALL 
SELECT 6 , 2009, 40, 'GR', 'BN', 'BMA-SJ', '21.New Deposit', 0 FROM DUAL 
)
SELECT sem,
       student_level,
       college,
       program,
       status,
--       max(CASE WHEN WEEKNO=2 AND YEAR=2007 THEN TOT END) AS Y1W2,
--       max(CASE WHEN WEEKNO=3 AND YEAR=2007 THEN TOT END) AS Y1W3,
--       max(CASE WHEN WEEKNO=4 AND YEAR=2007 THEN TOT END) AS Y1W4,
--       max(CASE WHEN WEEKNO=5 AND YEAR=2007 THEN TOT END) AS Y1W5,
--       max(CASE WHEN WEEKNO=6 AND YEAR=2007 THEN TOT END) AS Y1W6,
--       max(CASE WHEN WEEKNO=2 AND YEAR=2008 THEN TOT END) AS Y2W2,
--       max(CASE WHEN WEEKNO=3 AND YEAR=2008 THEN TOT END) AS Y2W3,
--       max(CASE WHEN WEEKNO=4 AND YEAR=2008 THEN TOT END) AS Y2W4,
--       max(CASE WHEN WEEKNO=5 AND YEAR=2008 THEN TOT END) AS Y2W5,
--       max(CASE WHEN WEEKNO=6 AND YEAR=2008 THEN TOT END) AS Y2W6,
       max(CASE WHEN WEEKNO=2 AND YEAR=2009 THEN TOT END) AS Y3W2,
       max(CASE WHEN WEEKNO=3 AND YEAR=2009 THEN TOT END) AS Y3W3,
       max(CASE WHEN WEEKNO=4 AND YEAR=2009 THEN TOT END) AS Y3W4,
       max(CASE WHEN WEEKNO=5 AND YEAR=2009 THEN TOT END) AS Y3W5,
       max(CASE WHEN WEEKNO=6 AND YEAR=2009 THEN TOT END) AS Y3W6
FROM ADMLIST
GROUP BY sem,
         student_level,
         college,
         program,
         status
ORDER BY 5;

Hello

You can get the difference from one week to the next (or 0) using the analytical LAG function, like this:

GREATEST ( tot - LAG (tot) OVER ( PARTITION BY  status  -- and maybe other columns, like sem, student_level, ..., too
                                       ORDER BY      year
                      ,          weekno
                    )
       , 0
       )     AS dif

Corresponds to the data you posted really what is in your tables, or is it the result of an earlier stage?

If it's really in your tables, and then instead of select of your tables, select in a UNION of
(a) your table except the lines where status = '21.New' file
(b) your table, once again, with status ='21.New deposit "and the numbers of dif (as shown above) in the column tot.

If the data you posted is a partially digested form of your RAW files, then dif can probably be incorporated into the digestion process.

In any case, calculate dif until you rotate the data.

Tags: Database

Similar Questions

  • calculation of the week and the month of the column date

    I have 3 data as column
    with tab as 
(
  select 'Topshop' brand, '10-JUL-11' deliverydate, '100' qty from dual union all
  select 'Topshop' brand, '10-JUL-11' deliverydate, '400' qty from dual union all
  select 'NewSita' brand, '11-JUL-11' deliverydate, '200' qty from dual union all
  select 'LaGress' brand, '12-JUL-11' deliverydate, '300' qty from dual union all
  select 'LaGress' brand, '10-AUG-11' deliverydate, '100' qty from dual union all
  select 'LaGress' brand, '11-AUG-11' deliverydate, '200' qty from dual union all
  select 'Topshop' brand, '12-AUG-11' deliverydate, '300' qty from dual union all
  select 'NewSita' brand, '10-SEP-11' deliverydate, '100' qty from dual union all
  select 'Topshop' brand, '11-SEP-11' deliverydate, '200' qty from dual union all
  select 'NewSita' brand, '12-SEP-11' deliverydate, '300' qty from dual
) select * from tab
    I need to convert it to 4 columns

    Brand | Month | Week (start date). Amount (sum)

    Please let me know what are the options I have, in particular the calculation of date and time functions available to solve these problems.

    Thank you
    w\

    Check this box

    with tab as
    (
    Select the option 'Topshop' brand, July 10, 11 'deliverydate, ' 100' qty of any union double
    Select the option 'Topshop' brand, July 10, 11 'deliverydate, ' 400' qty of any union double
    Select the option "NewSita" brand, 11 July 11 'deliverydate, ' 200' qty of any union double
    Select "brand the LaGress, 12 July 11' deliverydate, '300' qty of union double all the»
    Select "brand the LaGress, 10 Aug 11' deliverydate, '100' qty of union double all the»
    Select "brand the LaGress, 11 Aug 11' deliverydate, '200' qty of union double all the»
    Select the option 'Topshop' brand, 12 Aug 11 'deliverydate, ' 300' qty of any union double
    Select the brand 'NewSita',' 10-SEP-11 deliverydate, '100' qty of all double union
    Select the option 'Topshop' brand,' 11-SEP-11 deliverydate, '200' qty of any union double
    Select the option "NewSita" brand, deliverydate, '300' qty of the double' 12-SEPT-11
    ) select the brand, deliverydate, NEXT_DAY (to_date (deliverydate, 'DD-MON-yy'), "LUN")-7, Qty tab.

  • Workstation 9 - slow network performance between the host and guest

    I am running windows 8 on the host and installed by 9 trial. Then installed windows 8.1 as a comment system.

    I'm a slow, very slow network between the two.

    If I send files to and from the computer with another guest, transfers are normal, but if I try the same files between the host and the guest, they are really slow.

    I use a bridge connection.

    I read elseware to disable the following on the guest card:

    Large Send Offload v2 (IPv4)

    Large Send Offload v2 (IPv6)

    But that did not help.

    Thoughts?

    Maybe then try Hyper-v, it help you better.

    report this incident to Vmware if you can

    Concerning

  • diff between the view and the materialized view

    Hi all

    Whats different between the view and the materialized view?

    could someone help me pls this topic

    thnks in advance

    See nothing else that a set is a set of sql statements that join the single or multiple tables and shows the data... However views do not have the data themselves but point to the data.

    Whereas the materialized view is a concept used primarily in the Datawarehousing... these views contain the data itself. Reason being, it is more easy/quick access to the data. The main objective of Materialized view is to perform calculations and display data from multiple tables by using joins.
    check out the link for more information below.
    http://www.geekinterview.com/question_details/29332

    rajeysh
    http://oracleinstance.blogspot.com

  • My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

    My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

    A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

    Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

  • Difference between the G20 and G25 models

    Hi people!

    I searched your laptop and I was amazed by the Qosmio.
    When I was going to order it, I noticed that there are many models of the G20 with different specifications. Also, I found G25 on internet research and found no difference between the G25 and G20 except receiver TV G25 is NTSC and G20 was released on March and G25 was in June. Instead, they have the same specifications for the hard drive.

    I live in the Portugal and the model Qosmio I can find that this is the G20-118. I was looking for the model that has 2 x 100 GB SATA HD, but cannot not thought about it.

    Internet research I found Qosmio G20-111 which has 2 x 100 GB SATA HD, but on the web page mentioned that it was a Pentium III processor (ridiculous, isn't?). I was looking for more reliable information.

    Already searched for toshiba pages and found no specifications for all models I found 490LS on the research on the web as the G20 - 102, 105, 106, 108, 109, 111, 118, 123,...

    Can someone help me with this? Are there any reliable web page where I can see the differences between the models? is there a .pdf or anyone who can please give me some advice?

    Money is not a problem at this time to acquire the laptop, I'm looking for only the laptop performance more!

    Best regards
    João Pereira

    Hello

    It of very difficult to say what camera is best, because there are many models with different parts.
    However, I found page with description of the G20 and G25.
    Take a look at this link.

    http://www.releasereview.com/Toshiba-Qosmio-G20-105-108-114.aspx?d=0101000580926052005

    Good bye

  • Is it safe to leave the cover of the keyboard between the keyboard and screen retina when I close the macbook?

    Hi, I have a macbook pro 15 "retina.

    I got the cover of the keyboard (not cheap but decent), and I use it everytime I open my macbook.

    However, I heard that it would be dangerous to leave the keypad cover when you close the macbook. Because it could hurt the sensitive retina screen.

    Is this true?

    Is it safe to leave the cover on my keyboard when I close the macbook? It's a little annoying move coverage of my keyboard everytime I have my macbook to opening / closing.

    If it's dangerous, is there a cover keyboard without danger to the retina on the market?

    Thanks for the help!

    I have used Moshi Clearguard kb current covers on two MacBook Pro, including retina mid-2014, I usually use closed with my Apple display 27 ". I put KB covers on as soon as I bought computers and have never deleted without fingers never touched my keys. I did it because I saw how dirty the kbs in the Apple Store, and the seller told me that once the black keys are oily, it is impossible to clean completely. I started with a silicone rubber cap. Three weeks later, I threw it in disgust and I bought a Moshi to replace.

    Moshi rugs are much thinner and lighter than the silicone rubber ones more adapted, hold their shape better, stay clear longer and are much easier to clean and type through. In addition to the one on my computer Ko, I keep one on the external Apple wireless keyboard which is always exposed on my desk. These caches really keep particulate crud, and they do not interfere with my typing at all. When they are dirty, I rub it in the sink with a detergent and a brush to vegetables, and when possible discoloration becomes noticeable after three or four years, I replace it with new ones.

    My previous MBP, a Core 2 Duo late 2008 unibody model, allows to get much hotter than my current on occasion, and I fear sometimes that heat buildup between the lowercase and the display closed would cook the KB cover or even the screen itself. But that never happened, but I guess it might have helped if any yellowing of the coverage.

    If use you Moshi hiding for seven years, I would never consider a time using a silicone back cover. I did not, and you shouldn't worry about all to close your view on a Moshi.

  • Satellite P - grains of dust between the screen and before

    Hello.

    After a few weeks of suddenly, I have a speck of dust between the screen and front end.
    How can he get there and so I have to send in the laptop to the service?

    Greetings from the Germany and sorry for my bad English.

    Hello

    I think that it of difficult to say something about it, but I think that in this case, you can't do anything. The only chance is in touch with an authorized service provider because technicians can disassemble the laptop and check this box. If you disassemble the notebook you will lose you warranty so I n t this

    If you don't know where is the nearest ASP, you can search here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    Simply contact the technicians. You will see that it s interesting to talk with them a little and they are friendly. ;)

  • Connection between the monitor and the Studio 1458 laptop seems broken

    After happily using my Dell Studio 1458 for a little over a year, all of a sudden my laptop screen went completely blank (not black, but a sort of grey empty) when I started yesterday. I have reset several times, I let it run and I heard the sounds of standard Windows startup. Since I assumed the laptop worked again very well, and I plugged an external monitor. I am now using the laptop with this external monitor and everything except the monitor to the laptop works very well.

    I can still go to "change screen resolution" and see the laptop screen correctly detected by Windows. I can turn it on by selecting "extend these screens. I can also change the screen resolution on the laptop screen. It's the same kind of gray white whatever I do. Of all this I conclude, there is nothing wrong with the drivers: the more likely culprit seems to be the link between the laptop and the screen of the laptop. Unfortunately I ran out of warranty three weeks ago so I don't know what are my options here. I started to disassemble the laptop to see if maybe I could plug a cable loose once more, but I got cold feet at halfway when I remembered that I had saved not properly all my files.

    Any ideas on how should I proceed?

    Thank you

    Johannes

    This would mean it's time to start trying new parts - cable first.  If that does nothing, try a new inverter (if the screen is CCFL).  If it's backlit by LEDS, try a new screen.

  • The difference between the ADR and ADF

    People,

    Hello.   I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University. I develop the application for Admission online for future student to apply for admission.

    I need to install Oracle ADF (Application Development Framework) or ADR (execution of Application Development) to run my application for Admission online web page for PeopleSoft Campus Solution 9.0, but I do not know the difference between the ADF and the ADR.

    My installations are below:

    Server machine: Oracle Linux 5.10 (64-bit)

    Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

    Architecture Internet Oracle Linux 5.10 Server:

    (1) database server: Oracle Database 11 g

    (2) the server application: Tuxedo 11 g

    (3) web Server: Web 11 g logic

    (4) browser: Firefox Mozila

    5) 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

    On the download page http://www.Oracle.com/technetwork/developer-tools/ADF/downloads/index.html , there are 2 packages to download:

    (1) execution of the 12.1.3.0 application development

    (2) oracle ADF essential 12.1.3.0

    My Architecture Internet of PeopleSoft as shown above has been working properly for a long time. Logical Web 11g works correctly. It seems that the first 'Application development performance' package also install logical Web server which is not necessary in my machine. In addition, ADR is not free, and we may need to purchase the license.

    Essential because ADF is free and without license fees, I chose Oracle ADF essential 12.1.3.0.0 to develop the application for admission online. I read his paper on http://www.oracle.com/technetwork/developer-tools/jdev/documentation/121300-cert-2164864.html

    9.0 Solution Campus system will be run by a University to do business formally.

    My questions are:

    First of all, what package is right for my application for Admission online Campus Solution 9.0? ADR or essential ADF?

    Second, if choose essential ADF, I have a few questions about the 12.1.3.0.0 ADF to match my installations as below:

    (1) as indicated in the document, ADF 12.1.3.0.0 can work with Oracle Linux 5 & 6 (64-bit) and other operating systems. ADF can also work with Windows XP? Can I install ADF with my Oracle Linux 5 server machine?

    (2) as indicated in the document, ADF 12.1.3.0.0 can work with Websphere Server Application. ADF can work with Tuxedo 11 g?

    (3) as indicated in the document, ADF 12.1.3.0.0 can work with the Firefox browser. ADF can work with Internet Explorer in Windows XP?

    Thanks in advance.

    If you want to use essentials, you must download the package from the essential. ADR is the complete stack where you must purchase a license.

    Timo

  • compressed backup size differ between the band and hard drive

    It is out of curiosity.

    11.2.0.3 EE on OEL 5.6 DB (64 bit) + Compression Adv.

    TSM for MML

    The disc and sbt_tape are configured for compressed backupsets

    compression algorithm is set to 'HIGH '.

    If I backup to disk, it takes 1.5hrs and produces a backup 10 GB piece.

    If I backup to tape, it takes 5 hours and produced a 27 GB backup piece.

    I look at 'top', it seems that 1 core working 100% with the majority of which (> 90%) being "user" (that's to say not i/o-bound or wait)

    (part of the 10 GB backup tape backup takes < 2 min over a link to 1GigE)

    Has anyone else seen this type of difference in size when they perform a compressed disk vs. tape backup?

    Is this supposed to happen?

    Should I be worried?

    Thank you very much for any information.

    MK

    After several Reading the Famous Mwill integrate, it seems that "compression unused block" is shot in for the DISCS.

    RMAN backup concepts

    So, Yes.  An algorithm different is used between the DISCS and SBT_TAPE.

    MK

  • difference between the view and the procedure

    Hi Master,

    Today I received a request from my senior technical leader... !!

    Q > what is the difference between the view and the procedure?

    I got response like this...

    A view represents the logic of one or more tables/views. It won't take no place in db... It is a virtual table, query will only store in db... useful

    for safety... If the main table has obtained changes... automatically discovers also change... etc.

    Proecudure is a db object will be performs a perticular action... It may or may not return values. ?

    But somehow, he isn't happy... He expects more... .very close view of diff. b & w and procedure.

    Please explain it to me...!

    Concerning

    AR

    874273 wrote:

    Hi Blu,

    Thanks for your replies...! But we think if notice and procedure will be the same no matter what point of view? Both are the same? If Design view... We can create a stored procedure?

    How a view and procedure may do the same thing?  They are two different things with different objectives.  You use the correct one depending on what you want to achieve; they are not interchangeable.

    And another question...!

    (Q) how you will store Japan, characters of China in a database table? will there be a new feature in Oracle 11 g?

    (A) I use dbms_lob package? Japan/China characters are multi byte characters... so we can use the nclob data type?

    is this correct... ?

    No, it not there no novelty in Oracle 11 g for the storage of Japanese or Chinese characters, because there is already a feature for their storage in previous versions as well.  It is determined by the parameters characterset and nationality that you use when you create the database.

    Why would you choose to store them in a LOB using DBMS_LOB?  Yes, they have multibyte characters, but if you have configured your database for the correct character sets, for example using UTF - 8, then you can store the characters in VARCHAR2, like any other language.  The only difference is that the storage of 4000 bytes limit still applies, so you maybe isn't able to store 4000 multibyte characters in a varchar2 column 4000 single-byte, it can be as little as 1000 characters if they are all characters in 4 bytes.  (Note: 12 c limit in SQL can be increased up to 32,767 characters, to harmonize it with variable varchar2 PL)

  • What is the difference between the model and its clone in VMware?

    What is the difference between the model and its clone in VMware?

    Clone

    A clone is a copy of the virtual machine.

    You can't convert back the cloned Virtual Machine.

    A Clone of a Virtual Machine can be created when the Virtual Machine is running

    Cloning can be done in two ways: Clone full and linked Clone.

    A full clone is an independent copy of a virtual machine that shares nothing with the parent virtual machine after the cloning operation. Continuous operation of a full clone is entirely separate from the parent virtual machine.

    A linked clone is a copy of a virtual machine that shares virtual disks with the virtual machine of parent on a regular basis. This preserves disk space and allows multiple virtual machines to use the same software installation.

    Cloning of a virtual machine can save time if you are deploying several similar virtual machines. You can create, configure, install the software on a single VM and then clone several times, rather than the creation and configuration of each virtual machine individually.

    Model

    A model is an original copy or a reference image of a virtual machine that can be used to create many clones.

    Models can be turned on or edited and are harder to change than usual of virtual machine.

    You can convert the model to the Virtual Machine update model base with the latest released patches and updates and to install or upgrade any software and still convert to template to use for the future deployment of Virtual Machines with the latest patches.

    Convert virtual machine model cannot be performed, when the virtual machine is running.  Only the Clone to the model can be performed when the Virtual Machine is running.

    A model offers a safer way to preserve a virtual machine configuration that you want to deploy several times.

    When you clone a virtual machine or deploy a virtual machine from a template, the cloned virtual machine resulting is independent of the virtual machine or the original model.

  • synchronization between the iphone and windows 7

    Can I synchronize excel and word between iphone and windows 7?  How?  CAN I get excel and word or compatible programs (aps) on iphone?  Also - I have an old version of MS Outlook (2002, 10.6 V, SP3) I want to be able to sync with the calendar on the iphone.  What can I and how?

    Also - I do not trust "the cloud."  How can I synchronize and transfer stuff between the iphone and my computer (win 7) without putting them on the cloud?

    Don't have an iphone yet, this will be my first smart phone.  Being able to use the above programs and stay out of the cloud are my priorities.

    Thank you

    Word and Excel:

    https://iTunes.Apple.com/us/app/Microsoft-Excel/id586683407?Mt=8

    https://iTunes.Apple.com/us/app/Microsoft-Word/id586447913?Mt=8

    Yes, you can sync if you store your documents in the cloud, but you do not trust so the answer is, you cannot them synchronize the.

    lar136 wrote:

    Don't have an iphone yet, this will be my first smart phone.  Be able to use the above programs and stay out of the cloud is my priorities.

    Don't get an iPhone. I think the Android device is a better solution for you.

  • In preferences, search option is missing between the general and the content.

    I use Firefox 40.0.3 on OSX and I tried to set the search parameters. When I go into Preferences, I don't see the search catgergory. If I remember correctly there used to be between the general and the content, but it just disappeared. I was wondering if there is a way to recover or if these options have been moved to another location in the new version.

    I restarted Firefox in safe mode to disable all addons. It is not yet here.

    You have disabled browser.search.showOneOffButtons [set this pref to false] in Subject: config?
    Enter about: config in the URL bar and press ENTER. then use the search box at top.

    Options > Search "tab" disappears when this pref is toggled to false. Search preferences back to the old system where the 'controls' are in the search bar - manage search... engines such as those used before Firefox 34.

Maybe you are looking for