Perform research on the loading of the page

Similar Questions

• Performance issue on the page size for CARS

  The cluster we use 8 k page size and a 24 GB RAM under windows 2003.
  
  We have read on the site of Don Burleson, "for optimum performance, the size of the page on an oracle cluster should be 4 k. Is this right statement, Oracle cluster have better performance with 4 k pages.
  
  Thank you

  read this on metalink: using large memory on 64-Bit Windows systems ID 422844.1 Pages

  then decide for yourself.

  Published by: Paul R @ NL February 9, 2010 02:49

• trying to improve the performance of my loading of the page upward

  In my apex page.i have created tabs...
  I don't know why, it's slow to load pages...
  
  Also I stored all my images in apex/images folder
  
  Are there ways to improve the loading time of apex...
  
  The sql and the plsql are all well.
  can someone give me more ideas on how to improve performance for loading times
  It seems content Central css has a loading time takes about 30 seconds...
  Also these tabs...
  
  
  I tested it in another machine, it works fine... Some machines it wont...
  Please tell me how we can on how to improve performance in these scenarios...
  
  Published by: zycoz100 on November 1, 2012 05:32

  30 seconds? I don't think that CSS itself is the problem.
  If it depends on the machine, can be simple network problems?

  However, try to run the page in debug mode to see what happens and which takes too much time.
  I also advice allows you to use a such as PageSpeed and YSlow Firefox plugin.

• How to prevent from loading alongside the page I actually laoded apges announcement?

  How to stop additional (or generally unwanted) pages loading alongside the page I actually asked.

  These additional pages can be advertisements or some sell a program that is supposed to improve the performance of my system.

  I'm using Firefox under Microsoft 8.1 34.0.5.

  Never, the problem appeared when using XP that I converted from a month ago!

  Adblock more {web link}
  Blocks annoying video ads on YouTube, Facebook ads, banners
  and much more. Adblock Plus blocks all the annoying ads, and
  supports Web sites by blocking is not discrete (configurable) default ads.

• When I run mozilla or open a link in a new window but I get the page you want to load an additional page of the new tab opens with it, the difficulty?

  When I launch mozilla or open a link in a new window I get the page you want to load but an additional page of the new tab opens with her. I tried to change my homepage to different things (new tab, firefox home, see the blank page) but I always get a new additional tab to open. How can I get only one page to open it?

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  
  Note: This will make you lose all the Extensions and preferences.

  • Sites Web open is not recorded in less than 25 versions of Firefox.

  To reset Firefox, perform the following steps:

  For Firefox versions prior to 29,0:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the "Reset Firefox" line

     

     button.

  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  For Firefox 29,0 and above:

  1. Click the menu button

     

     click Help

     

     and select troubleshooting information.

  Now, should open a new tab containing your troubleshooting information.

  1. At the top right of the page, you should see a button that says "Reset Firefox"

     

     . Click on it.

  2. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  3. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Initially Web pages load very slowly, but are a lot faster if I stop and reload the page

  Whenever I have initially load ANY page of a Web site, the first page really takes a lot of time to load. All pages of this site is loading very quickly thereafter. I also noticed that if I stop the loading of the page, immediately after my first click and then click on reload, the page loads almost instantly. I am currently using Firefox 20.0.1, but this problem has occurred for a while... at least as far as Firefox 19. According to my research, I've tried a bunch of suggested solutions, but nothing helps... including: off hardware acceleration, don't select any proxy, disabled ABP, etc.. Any other suggestions would be greatly appreciated. Thank you!

  Hello stw203, maybe try to reset all the related settings in your network configuration. enter Subject: config in the bar firefox address (confirm the message information where it appears) & are looking for any preference, starting with the network in bold (= set of users) - do a right click and put these entries to their default value.

• The new version of Firefox, 18.02, will load all the pages. Why not?

  I tried to open Firefox and I was told that it would when the updates have been applied, which was nothing new. It loaded fine and there is no incompatible Modules, but it won't load any web pages. I'm on the same computer using Chrome to send this message. Everything worked fine in version 18.01.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Loading the Google's HTTPS version causes Firefox to do 3 background request every 45 seconds even after closing the page.

  Loading the Google's HTTPS version causes Firefox to do 3 background request every 45 seconds even after closing the page.
  With any other HTTPS sites that support HTTP Strict Transport Security (HST), I noticed connection only 1 history.
  How can I disable these background connections?

  Hello, I'm no expert on the matter, but it is quite possible that the spdy Protocol, which is used by google on its secure sites (twitter atm) and is causing the behavior that you have seen.

  "SPDY connections are persistent connections. For optimal performance, it is expected that clients will not close the open connections until the user navigates away from all web pages referring to a connection, or until the server closes the connection. Servers are encouraged from the connections open as long as possible, but can stop idle connections if necessary. »
  http://mbelshe.github.com/SPDY-specification/draft-mbelshe-SPDY-00.XML#RFC.section.2.1

  You can try to disable support for the spdy Protocol in firefox (in all: config) and see if that changes the number and length of connections to the server.

• Long pause while the page is loading

  I was a user of long 3.6.XX release date and loved the performance of firefox. Since the upgrade to version 12.X.x and now 14.x.x, I noticed a serious decline on page load times. Sometimes it may take 60 seconds or longer to load a page. If it click on 'stop' and then 'recharge' loading the page as fast as ever. When page loading is slow, I noticed on the bottom left, he said that he has to wait on some website to answer. I think the problem is with the offending website is ready to load is the common followed by cookie Web sites which blocked my software anti-malware and firefox unable to reach. Firefox will freeze during a page load until I guess some clock left and continues to load the page you requested.

  Announcement that I said earlier, I have tried all the common solutions and none worked.

  I think I have solved my problem though. I replaced my HOSTS file in c:\windows\system32\drivers\ect with the hosts of this URL http://winhelp2002.mvps.org/hosts.htm file

  What it does is to redirect all traffic to and from the unwanted urls in localhost 127.0.0.1 and indeed keeps firefox for URLS that it will never reach. Was an hour now and have not had any delay on who my malware try normally block the page loading

• Clickable options do not work once the page loads completely?

  I have just updated (Java, Flash, etc) and when there is a pop up or clickable option one on a Web site (such as to equip something to an avatar or something in a pop-up window), all I get is a "#" at the end of my URL and it moves me at the top of the page.

  The only time where this does not occur is when the page is still loading (loading the page is always, I have full access to the page to do anything normally. By clicking on the elements to be equipped or clicking on the pop-up window work). Whenever the page is completely loaded, she answer sometimes.

  I tried to clear my cache, cookies and all other personal data except modules (which did not affect his performances before). I always had this problem.

  On my addons, it says that my Java Console is incomparable with my FF, but this did not affect the performance of my FF.

  To avoid confusion: http://kb.mozillazine.org/JavaScript_is_not_Java

  Make sure that you are not blocking JavaScript.

  • https://support.Mozilla.com/kb/JavaScript

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• Classic report that spans the page loading

  THM:2

  4.2.1

  Hi all

  I have two classic reports side by side, based on a somewhat expensive query that returns a number of lines (500) also, we have a box of research and other filters to work on this report. However, the problem is that when the page loads, since the reports run sequentially, the first report on the left side, extends all the way to the right for a few seconds before returning to the right size. I guess this happens because then the second report query (right) runs and pushes the left up. Is there a way to fix the two classic reports width such that it does not stretch on page load?

  Thank you!

  Ryan

  Hi Ryan,

  Ryansun-Oracle wrote:

  THM:2

  4.2.1

  Hi all

  I have two classic reports side by side, based on a somewhat expensive query that returns a number of lines (500) also, we have a box of research and other filters to work on this report. However, the problem is that when the page loads, since the reports run sequentially, the first report on the left side, extends all the way to the right for a few seconds before returning to the right size. I guess this happens because then the second report query (right) runs and pushes the left up. Is there a way to fix the two classic reports width such that it does not stretch on page load?

  Thank you!

  Ryan

  Region change and put css in the attributes of the region to set the size of the region

  style="height:300px;width:500px;"
  

  or you want scrolling of fixed size, if your report has no more. columns fit more in the size

  style="height:300px;width:500px;overflow-y:auto;"
  

  Kind regards

  Jitendra

• Validation of required field only when the page loads (HR test case!) included

  Hi experts,

  
  Here you have a simple test for Jdev 12.1.3 HR case: https://dl.dropboxusercontent.com/u/18609389/TestHR.zip

  The main.jspx is just a button which CreateInsert a record dept displayed in another page:

  

  My problem is the following page (test.jspx) has this code to run when the page loads:

  <af:serverListener type="onloadEvent" method="#{backingBeanScope.backinBean.onPageLoad}"/>
              <af:clientListener method="onLoadClient" type="load"/>
              <af:resource type="javascript">
                function onLoadClient(event) {
                    AdfCustomEvent.queue(event.getSource(), "onloadEvent", 
                    {
                    },
  false);
                    return true;
                }
              </af:resource>
  

  The code is simply this (now):

      public void onPageLoad(ClientEvent clientEvent) {
          logger.severe("HR TEST.....");
      }
  

  And that's the problem, required validation is performed.

  

  Can you tell me why?

  Thank you

  Jose.

  Don't know what is my mistake, but the code is of the actionListener button is not called. :-(

  Well, you combined two different ways to do this (from my first answer).

  If you are still reading this, you will notice "or" before the second suggestion

  Thus,.

  1. keep your clientListener under af:document tag

  2. based on javascript, you find key (use: alert ("button");)  to see if you have referenced correctly your button in findComponentById())

  And then:

  approach 1:

  Use AdfActionEvent.queue (button, true);  queue event on your action button and implement your logic in function attached to the properties of your 'actionListener' or 'action' button (if you don't need listener server in this case)

  approach 2:

  Use AdfCustomEvent.queue (button, "onloadEvent", {}, false);  the queue onloadEvent on your button (in this case you need listener server attached to your button)

  Dario

• DPS: Judge to use the parameter Raster or vector in the States of the objects when the majority of the page is a photo. What is the best setting for the overall performance?

  I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)

  Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?

  I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.

  All tips go ahead?

  Brian

  Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/

• Several areas of research in the same Page of the OFA

  Hello

  I'm new to OAF and while I practice the concepts, I have something in my mind on the creation of several search pages and tried to see how it behaves.

  I created a simple page with 2 regions serach (each from the different EO and VO). When I run the page and click on 'Go' on the first its got region performed on the two regions.

  I didn't write any code for it so far.  Strange thing is when I click on 'Clear' on the first region, that nothing is happening. But if I click on 'Clear' all values in the search field on the second region is eliminated from these two regions.  I know he is missing something, but don't know what it is. At this stage I cannot until the knowledge to build several areas of research.

  Can you please help me out here.

  When you have 2 pages of simple search, that's what I saw

  1 ' clear' on the first region button does not work.

  2. 'go' on the first region is performed on the two regions.

  3. "clear" on the second region performed on the two regions.

  Can you please help how to get to regions beyond?

  see the documentation for OAQueryBean (Developer's guide). You need to write code to support in your controller processRequest to support what you want.

  Concerning

  Marie Lise S

• Restrict execution of VO on the loading of the Page

  I have a VO on a page that is displayed as a table.

  So when the Page loads the VO is automatically performed and the data are displayed on the page as soon as the page loads.

  I can stop the execution of the VO on page load?

  I would like to have the table without data displayed when the page is loaded.

  I executed a ViewCriteria of this VO on only a click of a button. (I am able to do this).

  ... and to answer the question

  So when the Page loads the VO is automatically performed and the data are displayed on the page as soon as the page loads. I can stop the execution of the VO on page load?

  
  

  On the iterator that is referenced by the table, set the refreshCondition for example ${viewScope.managedBeanInthisScope.doExecute}. Then create the bean in viewScope as

  public class ManagedBeanInthisScopeCls {}

  Private boolean doExecute() = false;

  public void setDoExecute (boolean doExecute) {this.doExecute = doExecute ;}

  public boolean isDoExecute() {return this.doExecute ;}

  }

  Configure the bean managed in adfc-config. XML or a configuration of the workflow bounded and name the managed bean name 'managedBeanInthisScope '. The scope of 'view '.

  On the command button to use to query the table, add

  AF:setPropertyListener

  in: #{true}

  in: #{viewScope.managedBeanInthisScope.doExecute}

  type: action

  Frank