Dead phone after update bios that came from HP Support Assistant

Similar Questions

• How to delete a Photo Album that came from my Mac to my iPhone. I want to remove it from the phone.

  How to delete a Photo Album that came from my Mac to my iPhone. I want to remove it from the phone. I do not use the cloud. Just sync with USB.

  You must synchronize with iTunes again but to change the settings on the Photos to iTunes page for doesn't understand is not the album (s) that you do not want on the phone. See the information below to keep your photos safely stored and updated on all your devices - Apple Support

  If you want more pictures synced to your iPhone, iPad or iPod touch, turn off sync in iTunes and they will be removed from your device. You can disable synchronization for some of your photo albums or all of them at once.

  Stop the synchronization of some albums

  1. Open iTunes on your computer and connect your iPhone, iPad or iPod touch.
  2. Click the device icon in iTunes.
  3. Click on the Photos.
  4. Choose "Selected Albums" and deselect the albums or collections you want to stop synchronizing.
  5. Click on apply.

  Stop synchronization of all photos

  1. Open iTunes on your computer and connect your iPhone, iPad or iPod touch.
  2. Click the device icon in iTunes.
  3. Click on the Photos.
  4. Uncheck 'Synchronize Photos' and then click 'remove all '.
  5. Click on apply.

  Learn how remove photos and videos synced from iTunes when you can not access the originals.

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Cannot use the recovery CD after update BIOS on Tecra 9000.

  Failed to retrieve the system (Windows 2000) after update BIOS on Tecra 9000. Recovery CD says "it's a bad machine. Can I go back to old BIOS? Another solution?

  Hello

  Maybe chain can confirm, but I put t he seems the best idea to mix stuff designed for laptops Americans and Europeans models.

  Can you please confirm if the method described in the previous ad works?

• Download from cd: How can I download files to my documents that came from my old computer w/xp?

  How can I download files to my documents that came from my old computer w/xp. When I insert the CD all that appears is the Roxio program that wants to burn a new CD.

  Tuesday, June 15, 2010 21:21:34 + 0000, j r, johnson wrote:
   
  > How can I download files to my documents that came from my old computer w/xp. When I insert the CD all that appears is the Roxio program that wants to burn a new CD.
   
   
   
  Your question is very difficult to understand. First of all, you can not download
  from a CD. The word 'download' means to copy a file (perhaps a program)
  file, but not necessarily) from a server somewhere on the internet at
  your own computer. Please do not reverse this word by "install,"
  which means to load a program on your disk hard drive in a form where
  It can be run
   
  Generally, you install a program from a CD, a floppy disk or
  on the internet. Only in the latter case, the internet, is there any
  Download in question, but then again, it's a two-step process: first
  Download you it, and then you install it.
   
  Second, I don't know what you mean when you say ' files for my.
  documents '. Please specify what that means.
   
  And what CD you insert? Where do you have? Why are you
  Threading? What do you expect on that?
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• Dell Vostro 5470 not get Dell Logo after update bios in Windows 10

  Dell Vostro 5470 not get Dell Logo after update bios in Windows 10.

  Laptop computer has restarted:

  1 Fireed power led,

  2 Powered hard drive for 2 seconds to turn it off.

  3. stops...

  No Dell Logo, no beeps, can't go in the Bios.

  Test LCD works OK.

  Remove the module of Ram, power on and listen to beep

  Pressing the END key and power for laptop has no effect.

  Any idea?

  Yes. I did it.

  Laptop have bios Phoenix.

  Phoenix Bios have restored the USB Flash procedure.

  This procedure to restore the BIOS:

  1. download USB flash less than 4 GB.

  2 format in FAT.

  3. get your flash update of the Dell store - xxxx.exe

  4. run cmd.exe and in the command prompt, run /writehdrfile xxxx.exe

  5 extracted copy of Bios.cap for the flash player.

  6. turn off the power to the laptop.

  Next 7,8 step may not be necessary but I did it.

  7 disconnected all perihpericals with battery and charger.

  8 disconnect the HARD drive

  9. connect the USB on the laptop on the right side.

  10 press and hold the END

  11, Pluged the power cable and the relase the END key 1 second after the power cord is in.

  12 USB led on stick flashed quickly and we see the process of recovery of the Bios on the screen.

  13. After finishing laptop restarts and worked well.

• I can't download the updates from hp support assistant

  I have hp pavilion g6 and I can't download updates from hp support assistant, when I press download and install selected updates, then I found above downloads is finished, I clicked next and then when I came back I found that not yet made, help please!

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• HP Pavilion 15 laptop: update not downloaded from hp support assistant

  I have a laptop HP Pavilion 15 with the product J6L90PA #ACJ number. Today I just installed kaspersky anti virus and after I have could not download the updates from hp support assistant. The window indicates that its download, but there is no progress, motionless. I bought the laptop in July 2014 and 1 year I have Macafee antivirus. Today, I removed macafee by tool Development completely. Y at - it no problem for my system.  Screenshot of number is attached.

  @Edukrishnan

  Your system is probably OK - but seems the HPSA (HP Support Assistant) is more entitled to automatically download and / or install the HP drivers / updates.

  Your system:

  Laptop HP Pavilion 15-p073tx

  What's wrong?

  Could be the anti-virus / security program, could be a network problem independent somewhere between your computer and updates - could be a variety of things.  HPSA is good code; It is not infallible.

  You can use the following workaround - MANY people update this way, some because the HPSA hesitate to download / installation and others due to the extra comfort only update the computer when the owner / user is willing to do.

  • The HPSA settings > notify
  • Restart the computer and log in
  • Start the HPSA and click to get a new list of updates
  • Use the list as a reference >
  • Open the Page of driver for your computer Web site >
  • set parameters (operating system, etc.) >
  • Find updates to the page of your driver and decide whether to download and install the updates manually

  Reference:

  Updates - when and how

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• UPDATES FROM HP SUPPORT ASSISTANT PROBLEMS

  1 > product name - HP Pavilion DV6 3120 tx

  Product number - XV676PA #ACJ

  2 > OPERTING SYS... - WINDOWS 7 HOME BASIC (64-BIT)

  I GET NEW UPDATES FROM HP SUPPORT ASSISTANT. I WAS FACING THIS PROBLEM FOR A TIME LONG ENOUGH. WHENEVER I RUN HP SUPPORT SSA. IT IS IMPOSSIBLE TO GET UPDATES... SO, KINDLY TELL ME A SOLUTION...

  Hello

  Try the following.

  First, use Microsoft 'Fixit' on the following link to uninstall your current version of HP Support Assistant - this is particularly useful in avoiding the problems of resettlement when running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Once this process is complete, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the laptop.

  Kind regards

  DP - K

• Satellite L300 - dead after update BIOS!

  Hello!
  I had a problem with Windows XP, so I decided to update the BIOS. After update, I got 3 lines of errors. After the reboot, nothing appears on the scree! I have toke off the power to the battery and the power cable for some time, I had taken only one cable, but still nothing! No beeps, some noise of hard/dvd disc on begging. Can someone advise?

  Thanks in advance!

  Thom

  Hey Buddy,

  It seems that the BIOS is damaged and it must be reflashed to an authorized service provider. This is a delicate procedure so these tools can t be downloaded and are only available for the FSA. On the Toshiba site, you can find a list of all FSA. Simply contact the closest in the country and ask for help. Guys will help you best possible
  However, this forum can help you:
  www.theeldergeek.com/forum/index.php?showtopic=21209

• X 1 dead (?) after updating the bios

  Hello!

  I got my new carbon X 1 three hours ago. Desired system update update bios, which I left it, but something went south. The screen is black and the power button flashes slowly. I can turn the backlight on the keyboard power on and off and the led lights on the keyboard works, but nothing else seems to work. If I press the power button, it signals with two beeps, followed by three others.

  Y at - it a hope?

  Best,

  Tommy

  Step 2, 3, 4-case Tommy, you... and it's all...!

  Hard reset for X 1 carbon ThinkPad

• Satellite A60: Problem of memory after update Bios V.1.9

  Hi all

  I've just updated my bios to version 1.9 last week. Previously, I've upgraded my RAM from 512 MB to 1.5 GB (P4 2.8 GHz., 40 GB HARD drive) and my phone worked perfectly with the old Bios and RAM. After the Bios Update to the new version, 1.9, my laptop does not accept the module of RAM upgrade, windows xp still shows the blue screen, and then restart.

  After upgrading RAM off, my laptop works again. I tried several ways to solve this problem as take the battery, then reinsert the RAM or even formatted my HARD drive and installed a new Windows XP, but it didn't work. So what can I do to make my laptop to accept the upgrade of RAM? How to solve this problem? For this reason I now intend to buy a new laptop, if the problem can not be solved since I simulate a program on this laptop, so it requires a lot of memory.

  Thank you very much in advance for your answer.

  [Edited by: admin]

  Hello

  I put t really know what is the problem with the new update of the BIOS. In my opinion, you should contact the after-sales Service of Toshiba partner in your country and explain to them the situation. If your new module memory is compatible with the unit you should tell you want to have the old version of the BIOS. As much I know as technicians for this.

  If they see that there is a problem with the BIOS update, I'm sure they will for free.

  Good luck!

• Satellite A300 - after update BIOS black screen

  Hi all
  I just applied the update to the BIOS on my Satellite A300. After the update is successful, the system carries out a restart. Now when I try to start it I get no display, I can hear the proceedings to hear it, the CD player, the DVD, playback led flashes.

  The ASP Toshiba rang me (phone call), the motherboard must be replaced after a bios update, but it is very expensive for me :(
  Please can you tell me if they are a way to fix it without replacing the motherboard? The bios is an Insyde and according to the site Internet the bios bios [recovery technology | http://www.insydesw.com/press/2008/press_060308.htm]. I guess that the ASP does not know that.

  Please can you tell me how to start the recovery procedure it is possible (combination?),.
  Any help on fixing the laptop without replacing the motherboard will be much appreciated.

  Hello!

  I think that the ASP is just and in the worst cases, the motherboard should be replaced.

  You can try to remove the battery and the AC adapter. Wait one hour and then connect the AC adapter and the battery and try again.

  If it doesn't work you should go to an ASP. Perhaps a BIOS reset can solve the problem, but it can be done from an ASP.

  Good bye