Performance monitor doesn't have an unknown error
Hello world
We run CP for araoung 600 servers, lately, I've noticed Permon runs aground when I test connection and get the error unknown error.
Im getting this error on Windows 2008 servers only
CP is running amongst more than a month now, I've been abe to get data for 3 weeks but now there is no data performance for Windows 2008 servers.
Help, please.
Concerning
Knockaert
The service must be set to "Started" and "automatic". Try to modify the service settings and test again.
Tags: VMware
Similar Questions
-
Reception of IDE Device doesn't have ECC circuits error when starting
I have a Dell Dimension 2400 PC. The Dell monitor recently stop working and emitted a strange smell. I replaced it with a Samsung EX2220. From the start, I had problems getting started upward. I get a message that is not found primary drive 0. I ran the diagnostics and got "IDE Device failed circuit ECC error." When I tried to boot from a diskette, there so--"an Exception has occurred in the DISK module. MDM! No mapping found line! "I was able to start later (open the lid, removed all devices, etc.), but it takes awhile. I've turned off in several days because I'm afraid that there will always be problems. It worked very well; Therefore, I don't think there is a problem with the hard drive. I was also unable to start in safe mode. I would like to press the F8 key but kept getting keyboard failure. I would be grateful for any advice on how to proceed with this problem!
Hi 4EverGrateful,
We recommend that you first of all to you allows to cross check if the IDE cables are connected correctly to their connectors on the motherboard.
Try these steps and check the result.
Step 1: Change the priority on a hard drive boot device in the BIOS
a. start your computer, press the button Delete permanently to BIOS screen see.
b. change hard disk boot device priority.
c. Press F10 to save the settings and restart the computer.Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
KB2491683 doesn't have a 80070026 error code
Hi, had this update failure on my laptop for a while now, after much googling would like a solution. Someone at - it a fix.
Thank you
The error that you receive on the Windows Update page is 0 x 80070026 (ERROR_HANDLE_EOF STRSAFE_E_END_OF_FILE) seems to be the problem with the update being corrupted during the download somehow.
I will recommend allows you to perform a sweep of auditor of file system (CFS) to make sure that the Windows system files are in place and not the origin of the problem.
You can try to follow the given article:
http://support.Microsoft.com/default.aspx/KB/936212>
NOTE: If the SFC Scan doesn't find any errors on the machine, you can download updates manually on the computer from the given link and install it:
You can also try the following article to reset Windows Component Update:
http://support.Microsoft.com/kb/971058>
~ or ~.
I would recommend that you...
Launch a collateral request for assistance free Windows Update:
https://support.Microsoft.com/OAS/default.aspx?Gprid=6527>
Support for Windows Update:
http://support.Microsoft.com/GP/wusupport>
--
What applicant help in a discussion group or forum, please indicate your full version of Windows, the edition and service pack level, and perhaps other software antivirus or antimalware software can be installed. Firewall and security suite
Please do it in your next reply.
http://support.Microsoft.com/kb/555375>
UTC/GMT is 20:13 Sunday 4 September 2011
-
KB2310138 doesn't have an Update, error code 80070670
I tried an update of Microsoft Secutity Essential and it failed.
Update: KB2310138 (definition of 1.97.905.0)
Error details: Code 80070670.
I googled the error code, but it was no help for me. If you find a solution on how I can try to download it again, please explain it to me in terms very simple.
Thank you
St - iron
You will find support for Microsoft Security Essentials in these forums: http://social.answers.microsoft.com/Forums/en-US/category/mse
Additional references:
Checklist for installation of Microsoft Security Essentials
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4Should I have any other antivirus software and Microsoft Security Essentials?
http://blogs.msdn.com/b/securitytipstalk/archive/2010/09/08/do-i-need-both-Microsoft-security-essentials-and-another-antivirus-software-program.aspxCan I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Update of security doesn't have a 646 error code
I have 6 security updates which are continually do not install. Have followed the instructions on this thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c7a39a5e-AB12-4b20-a328-cbac9a998e6d
Therefore created the register.bat file, but this did not help.
Please tell me how to solve this problem, below are updates that fail and I get the error code 646, but there is no information no obvious how to solve this problem:
KB2289158
KB2284697
KB2483110
KB2412171
KB2288931
KB2288953
Read the problems known in this page, they explain what to do. There is a link to a fix the article.
-
KB2530548 installation doesn't have a 8007371C error code
I tried a few weeks install the KB2530548 update but it failed several times with an error 8007371 C code. I'm using 32 bit Vista Home Premium, Service pack 2. This also seems to prevent the installation of IE 9. This is getting tiring. Help, please.
David
I'm ready to do a re - format and reinstall. It seems to me, however, I had trouble finding how to reformat the hard drive the last time I tried to do it for Vista. Any suggestions?
DavidPEd a Windows repair installation
Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.
Note Run a repair installation will not damage files and applications that are currently installed on your computer.
To perform a repair of Windows 7 installation, follow these steps:
Close all running applications.
Insert the Windows 7 into the DVD drive of the computer.
In the settings window, click install now.
Note If Windows does not automatically detect the DVD, follow these steps:
Click Startand type Drive: \setup.exe in the box start the search .
Note The placeholder drive is the drive letter of the computer's DVD.
In the list of programs , click Setup.exe.
In the settings window, click install now.
Click connect to get the latest updates for installation (recommended).
Type the CD key if you are prompted to do so.
Select the operating system 'Windows Installer' page that you want to level or on-site.
Click Yes to accept the Microsoft software license agreement.
On the type of installation do you want? screen, click upgrade.
When the installation is complete, restart your computer and try again to install updates.
07/15 / 1110:43:16
-
Managed bean doesn't have this property error
Hello
I want to show the Group of radio buttons on my page. The values I put in my managed bean method that returns a list.
I took a selected component of radio one and he chose my method that returns a list.
But when I run the page it gives error that the class does not have the property.
Here is the code that I wrote in the method which returns the list:
Please let me know what is the problem here. Thank you
public list choiceList() {}
System.out.println ("inside the bean');
DCBindingContainer links =
(DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
DCIteratorBinding iter =
bindings.findIteratorBinding ("TblSurveyQuestionsView1Iterator");
ViewObject vo = iter.getViewObject ();
String rowAnswer =
vo.getCurrentRow ().getAttribute("RowAnswerChoice").toString ();
("String [] answers = rowAnswer.split("\\n ");
System.out.println (response [0] + "navneet" + answers [1]);
The list of answersList = Arrays.asList (answers);
Return answersList;
Rename the method to be getChoiceList() and write another one, with the name setChoiceList(List value) {...}
-
PSCC update doesn't have a U44M1P7 error code
PS CC update fails. I suspect that it is because my drive C (SSD 120) concerns only the OS software and I want that all other software installed on another hard drive. What should do?
Thanks for the reply. Here's what I learned today. U44M1P7simply error means the update has failed. Not a lot of help.
CC is hard to update the Psalm to help Adobe Agent CAT had me uninstall and reinstall. Reinstall is not permanently. After examining the errorlog (7 errors), I manually deleted a file which has been mentioned in a couple lines of text errors. Then the reinstallation was successful, but the update failed. Then I updated directly from the program itself (in aid), and the update was successful. I have informed Adobe technical support via a phone call that I waited on. BTW, is updated directly from the program went much more quickly also.
-
I have my Adobe ID and password.
But I have an unknown 'error' error message when I want to publish my web site.
Catalyst Adobe and business told me that my ID and pass word are ok.
wath can I do?
Thank you
The dialog in English says:
Please enter your Adobe Business Catalyst password to upgrade your account to use Adobe ID. Once upgraded, future interactions with Adobe Business Catalyst will be your Adobe ID credentials.
You have an old account Business Catalyst that you publish to. old accounts BC used a different connection system. Before you can post on this old site of BC of Muse, you must convert your old site BC to use the newer style connection AdobeID. You must enter your password for your old login BC, then the Muse will convert your old site BC for use AdobeID connection and you will be able to publish on your site of Muse.
-
Hello
I tried several days create a workflow to automatically remove the E1000 adapters on a virtual machine and its replacement by Vmxnet3 while maintaining the configuration of the network adapters.
Everything works fine with Linux VM (as the configuration is automatically preserved) but I have an error on the virtual Windows computer where I have to run a Powershell script (tried with batch also script) with guestScriptManager package.
Every script I try to run on a Windows 2008R2 VM does not reach the same step: create a temporary file in the comments. Error: "guest authentication that is used doesn't have sufficient permissions to perform this operation (workflow: create a temporary file in the task (item1) invited / Scriptable #8)"
Strangely, I am able to run a script, one or two times to just after a VM deployment and then I'm stuck with this error.
I tried with the local and domain administrator with no luck. I have no other description or log on to the error...
Any help would be appreciated
Thank you
For those who are wondering, I just updated my 5.1 ESXi Update 2 and the problem is solved.
Thanks to this thread: https://communities.vmware.com/thread/403326
-
I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?
Hello raulganau, welcome.
I suggest to try the system restore to restore the system to a date before the problem started. Try this...1. click on START2. click on "all programs".3. click on "Accessories".4. click on "system tools."5. click on "system restore."6 follow the instructions on the screen to restore the system to a date before the problem startedAlthough the system restore does not target the personal data, I recommend always backup your personal data, just in case something happens.For reference, I have included a link that provides more specific information about the restoration of the system and how to use it:Let us know if it works,Thank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When you try to open a link in windows mail (Vista) get the message "the file doesn't have a program associated with it for performing this action. Create an association in the set Associations control panel
original title: Windows mail in VistaWhen you try to open a link in windows mail (Vista) get the message "the file doesn't have a program associated with it for performing this action. Create an association in the set Associations control panel
original title: Windows mail in VistaUsually, but not necessarily always, this problem has to do with your Intrenet Explorer or your main browser with NOT all its faults.
Open start > default programs > set your default programs > column on the left, click on Internet Explorer or your main browser...
He said "this program has all its defaults"?
If not, click on choose by default for this program > put on check all entries in the list > OK when finished. -
Whenever I start my computer, I get the message: "this file doesn't have a program associated with to perform this action...". "for my external drives. I use these daily backup USB drives. It seems that the backup will run, if I acknowledge this message by clicking OK. If this is not the case - it won't. Why is that happening and how can I solve this problem?
You can repair the associations used to readers. One of my fellow MVPS, Shawn (no relationship lol) has default binding settings in his site here:
http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html
Just scroll down to find the link of 'reader', click it, and launches the link. You can do the same thing with "folder" and "directory" to be thorough.
-
I have an email which I can't delete and the message I get is that an unknown error has occurred
an e-mail can not be deleted, and the answer to attempts is 'a unknoen error has occurred' how can I remove this e-mail
Hello
I have exactly the same problem - only on who had multiple recipients of a message.
When I try to remove it simply says "an unknown error has occurred."
It is very annoying, anyone can help.
-
I have intalled Windows 10 and when I tried to open my pdf files I got this error message: Acrobat doesn't have its Basic DLL
Hi edwinn24434551,
You have Acrobat or Reader installed on your computer?
Also, let me know the version of Acrobat / Reader & operating system installed on your computer?
Kind regards
Nicos
Maybe you are looking for
-
I neeed a driver for a mzn505 installation run on windows 7. Is it available?
I need a driver for a mzn505 istall work on Windows 7. Are available?
-
HP Pavilion 15-ak085na 15.6 ": what video card is in this laptop?
I saw this laptop but without going to the store, I see not what video card it, seems that he remained off the coast the details of the product. I searched HP and did a general search on the internet and no results return - well on HP they do, but it
-
How can I go down to 3.2.2?
Hello I just bought a master keyboard Nektar Panorama P6 for use with MainStage. Short version, it works well with MainStage 3.2.3. But apparently 3.2.2 works very well. But my backups do not include most of the applications, and I can't seem to find
-
Default launch Safari, wolfnknite
An application named Wolfnknite appeared and looks like malicious software. I removed the app, but at the launch of Safari, the screen is suspect. For example, hovering over 'A way' shown 'open www.wolfnknite.com in a new tab '. Help!
-
Taking more time than expected to disconnect from a Server Windows 2008 R2 SP1
Taking more time than expected to disconnect from a Server Windows 2008 R2 SP1