Performance of BI with warehouse data or data warehouse.

Similar Questions

• How to perform a function with parameter date as input?

  Hello
  I have a function named fun1 (v_fun in date), including the date as an input parameter, and it returns a number. I created the function successfully. But I couldn't run this function in sqlplus. How to move the dates? Can someone help me in this regard.

  Hello

  V11081985 wrote:
  Hello
  I have a function named fun1 (v_fun in date), including the date as an input parameter, and it returns a number. I created the function successfully. But I couldn't run this function in sqlplus.

  It is difficult for me to say what you're doing wrong when I don't know what you're doing. After a full test script that people can run to recreate the problem and test their ideas. Include a definition of function, CREATE TABLE and INSERT statements for one of your own tables (if necessary) and the results you want from this data, as well as your query.

  How to move the dates? Can someone help me in this regard.

  You can call the function like this:

  SELECT  fun1 (hiredate)  AS fun1_results
  FROM    scott.emp
  ;
  

• Will be performing tasks VISA with a data acquisition (Dev1) in a VI block tasks with the second DAQ (Dev2) VISA in a second VI?

  Hi all

  I have two functional screw a loop a set of read and write tasks with device 1 (NI USB-6008).  The second loop a set of writing with device 2 (another NI USB-6008) tasks.  2 VI has a massively slower than VI 1 time scale, which means that it must run in a separate loop.  Otherwise, VI 2 was created by copying and modifying 1 VI and variable names actions with him (though not, for example, global variables).  The two screws are meant to run at the same time on the same PC.

  However, if VI 1 is running at the same time as VI 2, any read operations or in writing to 1 VI 1 device are executed - but the VISA read and write operations to a serial device work.  When VI 2, all VI 1 functions work fine.

  Although I configured channels for tasks using the GUI DAQmx, I execute tasks using reading DAQmx write commands and have correctly defined the task 'create' and 'stop the task' live out the beginning and the end of my loop, respectively.

  Does anyone have suggestions for what could be the cause?  My thoughts so far:

  a. maybe it's some conflicts in the names of variables in memory between the two screws?

  b. LabVIEW for some reason any cannot read and write two devices on two separate screws?

  should c. I avoid to use DAQmx to configure these tasks (a sort of memory)?

  I know I can make it work if I have all together in a single massive VI, but for my application, it is much easier and better to do them in two separate screws.

  Thank you in advance for your help!

  In case anyone wondered, I found the solution:

  When I copied the original code for a new VI, it turns out that the structures of loop timed in the new VI had the same object name in the delivery structure of LabVIEW as timed in the original VI loop structures.  This prevents effectively regardless of the VI was executed the second execution of the timed loop.  (The serial number read/write suite to work because he was in a different timed loop.)

  I found this error when I ran the VI in execution of highlight mode and noticed that the output of 'error' on the timed loop flashed.  When I plugged it on my error stream, I found error-808, which explains the above problem.

  I have it set by right-clicking on the timed loop, change to a while loop, then change to a timed loop and plug the broken wires.  LabVIEW gave the new timed loop object a new name, and all was well in the universe.

• ESXi with two data warehouses

  Hello

  I created an ESXi server with 2 data warehouses (2 logical drives). on the logic reader1 esxi is installed, and datastore1 is located. in this datastore1 all evnironments tests are recorded. on the second locial drive2 datastore2 is registered. There are all produvtive stored systems.

  When I added the second esxi data store it says that all existing data on the logical drive will be removed. No OK no problem right now.

  now logic disk1 ranout (datastore1) of space (50 GB hard drive). So I decided to replace it with a new hard drive with a lot more capacity. During the procedure to install esxi on the new drive hard I won't lose all data on logical disk1 and datastore1. but again not problem - test only environments (2 machines) it.

  But if I add my second drive to esxi - will I lose all the data on it too? or is there a workaround for just add to esxi without losing all my data?

  Thanks for help.

  Best regards

  bxtux007

  You will have to do so at the console - http://www.vm-help.com/esx/esx3i/ESXi_enable_SSH.php.

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Minimum installation to analyze with DIADEM data stored on server Citadel 5

  I want to access the data stored on a server of the Citadel 5, with minimal software installed on the computer of the end with Diadem 11.1.

  The goal is to perform the analysis of the data on the data acquired by data acquisition on a centralizedCitadel server in our lab (possibly in read-only mode).

  In several positions, it is suggested to install the Client Web Lookout development/Run-Time Systems 6.2 Windows 2000/XP/Vista.

  However, this installs a set of components (for example SQL engine...), that we would prefer to avoid.

  What is the minimum configuration for a machine that has no installation of LabView?

  Sincerely

  Paolo Pierini

  Sorry for the misunderstanding;

  as noted in the knowledge base How to recover data from a data base of Citadel with DIAdem, you must install the Citadel 5 database Access Pack, which is included in the package of Lookout. In any case, you can also download and install the Citadel 5 database Access Pack separately at this link.

  This pack should be sufficient in order to retrieve the data from the database of the Citadel.

  I could not find the version for Diadem 11.1, but given that the Diadem version 10.0 is the newest published, in my view, should be

  Serena

• Why do write can not be performed because the number of data channels does not match number of channels in the task.

  Possible reasons:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of job channels: 8
  Number of data channels: 1

  Lama says:

  The DAQmx vi writing gives me the error. If I run a single channel, isn't a problem. Multichannel gives me error.

  You are funny! Why tie yourself to work VI (single channel) instead of one that gives you errors (multichannel)?

  (If your car does not work, you bring car your wives to the mechanic, right!)

  What is the exact text in the multichannel 'physical channels' when you do the AO control?

  Lama says:

  I did a sequence to ensure that each function has been run in the correct order. Wouldn't a race condition.

  All you have to do is wire the 'start of task' error at the entrance of error of the DAQ assistant and then back to 'stop task' and things will run in order. Guaranteed! Think the stream! Everything else can run in parallel or the order is irrelevant.

  First convert the sequence stacked to a sequence of plate, remove the flat sequence and add the mentioned son. Now, do a "cleaning pattern.

  A when stacked with the inhabitants of the sequence is one of the worst construction you can possibly do. It makes the code difficult to follow, impossible to maintain, difficult to debug.

• [Explanation necessary] Clears the listview data and fill it again with new data

  Hello

  I correctly filled a listview in c ++, data analysed and does interesting things with it. However, I am drunk stumbling, unable to find a way delete and repopulate my display of the list...

  Question 1:

   

  1. How can after I insert data in the list view, I clear the list data and run again the same method (init) who populated the list view with the data in the first place?

  Here are the docs that I referenced and I don't understand how to implement the methods in my code.

  QList - clear() method

  https://developer.BlackBerry.com/Cascades/reference/QList.html#clear

  Using the data access Code, example
                            data_access/using_data_source

  GroupDataModel - Clear()

  https://developer.BlackBerry.com/Cascades/reference/bb__cascades__groupdatamodel.html#clear

  CODE
  
  Here is my code - filling of the display of the list of C++ and display of data in a ListView.

  MyApp.cpp

  MyApp::MyApp(bb::cascades::Application *app)
  : QObject(app){
      // create scene document from main.qml asset
          // set parent to created document to ensure it exists for the whole application lifetime
          QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
  
              AbstractPane *root = qml->createRootObject();
              qml->setContextProperty("yoyo",this);
              //grab references
              list_view = root->findChild("listView");
  
              // set created root object as a scene
              app->setScene(root);
  
              mNetworkAccessManager = new QNetworkAccessManager(this);
              bool result = connect(mNetworkAccessManager, SIGNAL(finished(QNetworkReply*)), this, SLOT(requestFinished(QNetworkReply*)));
  
               Q_ASSERT(result);
               Q_UNUSED(result);                 json = new QFile("data/file.json");
  }
  
  void MyApp::init(){
      QNetworkRequest request = QNetworkRequest();
       // i call some service here
       mNetworkAccessManager->get(request);
  }
  
  void MyApp::requestFinished(QNetworkReply *reply){
      qDebug() << reply->error();
      qDebug() << reply->errorString();
      if (reply->error() == QNetworkReply::NoError) {
          qDebug() << "No error";
  
                  QByteArray data = reply->readAll();
  
                  if (!json->open(QIODevice::ReadWrite)) {
                      qDebug() << "Failed to open file";
                      return;
                  }
                  json->write(data);
  
          bb::data::JsonDataAccess jda;
          QVariantMap results = jda.loadFromBuffer(data).toMap();
                  QVariantList lst = jda.loadFromBuffer(data).toList();
              GroupDataModel *m = new GroupDataModel();
                     m->insertList(lst);
                     m->setGrouping(ItemGrouping::None);
                     if(list_view) list_view->setDataModel(m);
  
      }else{
          showDialog("Boo",reply->errorString());
      }
  }
  

  MyApp.hpp

  // Tabbed pane project template
  #ifndef MyApp_HPP_
  #define MyApp_HPP_
  
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  namespace bb {
  namespace cascades {
  class Application;
  }
  }
  namespace bb {
  namespace data {
  class Application;
  }
  }
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class MyApp: public QObject {
  Q_OBJECT
  public:
      MyApp(bb::cascades::Application *app);
      virtual ~MyApp() {
      }
      Q_INVOKABLE
      void init();
  private slots:
      void requestFinished(QNetworkReply *reply);
  private:
      QNetworkAccessManager *mNetworkAccessManager;
      QNetworkRequest *request;
      QFile *json;
      bb::cascades::ListView *list_view;
  };
  
  #endif /* MyApp_HPP_ */
  

  hand. QML

  import bb.cascades 1.0
  
  Page{
  Container {
                          background: Color.White
                          ListView {
                              id: listView
                              preferredHeight: maxHeight
                              objectName: "listView"
                              listItemComponents: [
                                  ListItemComponent {
                                      type: "item"
                                      Container {
                                          Container {
                                              Label {
                                                  text: ListItemData.id
                                              }
                                          }
  
                                      }
                                  }
                              ]
                              onTriggered: {
                                  console.log("selected_index: " + indexPath)
                              }
                              horizontalAlignment: HorizontalAlignment.Center
                              verticalAlignment: VerticalAlignment.Center
                          }
  
  }
  }
  

  Question 2:

  How reference to the ListView object with the name "listView" in different parts of the MyApp.cpp file? Is there anything else I should add to the header file to make the accessible listView?

  Question 3:

  What happens when you call the clear() method? How the data model is affected? How the user interface is affected? What happens in memory?

  Question 4:

  How do you verify that the data in the list has been deleted so that you can go ahead and fills again with new data? What is the cheque that I perform?

  I would also like to know how you manage multiple views of lists and data sources in your applications. Best practices or ideas?

  Thank you
  

  I was able to clear the listview with the following code, if anyone is interested.

  listView.dataModel = null
  

  The dataModel must be set to "null".

• Error blackBerry software - synchronization failed, impossible to deal with organizing data

  I had a Q10 Blackberry last week.  I downloaded and installed the PC of Blackberry link 1.2.2.13 version.  Two-way sync USB worked fine.  Now, all of a sudden, I get the error message "synchronization failed, impossible to deal with organizing data."   I tried to reset the synchronization options, but not joy.  Also tried to uninstall and reinstall the software Link 1.2.2.13, once again no joy.  Any suggestions?

  UPDATE: I spent 4 hours on the phone and the remote session with the help of Blackberry last night.  After doing some troubleshooting to isolate the problem, determined that something on the device caused the problem of Outlook synchronization. One thing I've learned, it's that it can take a long time to synchronize and even though the progress of the screen may appear frozen, let it go until the end - sometimes it took 20-25 minutes, but eventually completed. Here's the process we went through - I would recommend appellant help BB and work with them to make sure you have not accidentally delete Outlook contacts and calendar of important information of your PC or BB device!.

  (1) we tried an uninstall/reinstall the PC Link BB software and that did not fix the problem.

  (2) to isolate the problem of synchronization.  We first did a synchronization of 2 channels 'contacts' and 'calendar' and who was a failure.  Then did a synchronization of only 2 channels 'contacts' and managed.  Then did a synchronization of only 2-way 'calendar' and that was a failure - so the problem was linked to calendar data and something on the device has been the cause of the problem or corrupted.

  (3) link BB allowing us to make a backup complete unit.

  4) then decided to do a 'Wipe security' on the device of BB Q10 to erase all the data and settings and return to a clean boot device configuration.  I was nervous about it - make double sure that Outlook all contacts and calendar data on the device and the PC are completely backed up in case something bad happens.  Nothing serious happened, but I was gald, we made the backup!

  (5) has the 'Security Wipe' feature (on the device, the settings > Security and privacy > wipe security) and phone rebooted without problems (takes a while to do).
  

  (6) then used link BB to do a sync test 1 channel 'contacts and calendar' from PC to device.  It worked without problem.

  (7) we then used BB link do a "restore" full backup of device, as we did in step 3 above.  It takes a while to make and was a success.

  (8) once the restoration of the aircraft was complete, BB link configured to perform a synchronization of 2 channels of the two 'contacts' and 'calendar '.  Does the synchronization and was a success.  Did a test by adding the new entry of the calendar on PC and did another 2-way sync - all worked very well.  Seems that the problem has been corrected, but will follow in the coming days.

  Lessons learned:

  (1) If you have a lot of Outlook contacts and calendar entries, the synchronization may take a long time.  Be patient and let it run - even if it seems stuck, etc!

  (2) save all Outlook data on the device and the PC to make sure that you have a backup something bad happened during troubleshooting.  We had not something bad happens, but I was gald we made a backup anyway.

  (2) call BB help - support person, I worked with was fabulous, even if it took some time to work through a patch.

   

• Need help with substring data

  Having problems reading CLOB data > 32000 and thought that maybe I can load the data into 3 separate columns less than 32000 k each.

  I tried to substring of a part of it first to see if it worked.

  DDL

  CREATE TABLE 'E406702 '. "" DSR3 ".

  (

  "RECORDNO' CHAR (8 BYTES),

  'DOCUMENTUNIVERSALID' CHAR (32 BYTES),

  "CREATIONDATE" TANK (30 BYTES),

  VARCHAR2 (250 BYTE) "ETL_STATUS."

  VARCHAR2 (4000 BYTE) "DSRDESCRIPTION."

  VARCHAR2 (4000 BYTE) "FORM."

  'REQUESTID' VARCHAR2 (4000 BYTE)

  )

  CONTROL FILE

  DOWNLOAD THE DATA

  INFILE 'DSR2DATA.txt' ' str "\r '"

  ADD

  IN THE DSR3 TABLE

  FIELDS TERMINATED BY ' <: s: >.

  (RecordNo CHAR (8),

  DocumentUniversalID TANK (32),

  CreationDate CHAR (30),

  CHAR ETL_STATUS (250).

  DSRDescription TANK (32700) "substr(:DSRDescription,1,32)."

  SHAPE TANK (4000).

  RequestId TANK (4000))

  Doing this, that I was able to load half of my files.

  Check the newspaper and saw

  
  SQL * Loader: release 11.2.0.1.0 - Production on sea Feb 19 09:40:40 2014

  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.

  Control file: c:\mytest7\DSR3CONTROL.txt
  Data file: DSR2DATA.txt
  Chain of the treatment of the files option: ' str "\r '"
  Bad leadership: c:\mytest7\DSR3CONTROL.bad
  Discard File: none is specified
  
  (Allow all releases)

  Number of loading: ALL
  Number of jump: 0
  Authorized errors: 50
  Link table: 64 lines, maximum of 256000 bytes
  Continuation of the debate: none is specified
  Path used: classics

  Table DSR3, loaded from every logical record.
  Insert the option in effect for this table: APPEND

  Column Position Len term Encl. Datatype name
  ------------------------------ ---------- ----- ---- ---- ---------------------
  RECORDNO FIRST 8 CHARACTERS
  String endpoint of: "<: s: > '"
  DOCUMENTUNIVERSALID THEN 32 CHARACTERS
  String endpoint of: "<: s: > '"
  CREATIONDATE THEN 30 CHARACTERS
  String endpoint of: "<: s: > '"
  ETL_STATUS THEN 250 CHARACTERS
  String endpoint of: "<: s: > '"
  DSRDESCRIPTION CHARACTER THEN 32700
  String endpoint of: "<: s: > '"
  The SQL string for the column: 'substr(:DSRDescription,1,32) '.
  TRAIN THEN 4000 CHARACTERS
  String endpoint of: "<: s: > '"
  REQUESTID THEN 4000 CHARACTERS
  String endpoint of: "<: s: > '"

  value used for the parameter LINES increased from 64 to 6
  Record 79: Rejected - error on the DSR3 table.
  ORA-01461: can bind to a LONG value only for insert into a LONG column

  Record 82: Rejected - error on the DSR3 table.
  ORA-01461: can bind to a LONG value only for insert into a LONG column

  Record 94: Rejected - error on the DSR3 table.
  ORA-01461: can bind to a LONG value only for insert into a LONG column

  Recording 160: Rejected - error on the DSR3 table.

  What is the problem that.   My goal was to make it work and then try to perform the following operations:

  Change the ddl to

  'DSRDESCRIPTION' CLOB,

  'DSRDESCRIPTION1' CLOB,

  'DSRDESCRIPTION2' CLOB,

  Change the control for this file.

  DSRDescription TANK (32700) "substr(:DSRDescription,1,32700)."

  DSRDescription2 TANK (32700) "substr(:DSRDescription,32701,65401)."

  DSRDescription3 TANK (15000) "substr(:DSRDescription,65402,80000)."

  Is - this bad way to go on this subject?

  If you can load data without any problem and read-only is a problem then you can use SUBSTR and concate (|) to read the entire string. Something like this:

  Select substr (DSRDescription, 1, 32000) | substr (DSRDescription, 32001, 64000) | dsr3 substr(DSRDescription,64001);

  or

  with the data as

  (

  Select substr (DSRDescription, 1, 32000) in the DSRDescription of dsr3

  Union of all the

  Select substr (DSRDescription, 32001, 64000) in the DSRDescription1 of dsr3

  Union of all the

  Select substr(DSRDescription,64001) in the DSRDescription2 of dsr3

  )

  Select * from data;

  Onkar

• Set session with past date in oracle

  Hi Experts

  about us / request zone of the Pacific of a column, we establish sysdate value for the column.

  setting sysdate, I use under sql so that he should take care Photonics day save and no light of day.

  cast( from_tz( cast( SYSDATE as timestamp ), 'US/Pacific') at time zone 'UTC' as date)

  
  

  Date today I tested, its gives me the correct value, but for the test date when day light economy performed as June 25, 2013.

  I wanted to define after date for my session and do some tests.
  

  could if it you please let me know sql for the session with over date formatting.

  Thanks 4 your help!

  Change the time on the server running Oracle.

• See the time with the date in the cell?

  How do you not see time with the date in a cell? I tried all the settings I can find but without success.

  Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6

  I don't want to see that 12:00:00 AM

  

  Hi Russ,

  Inspector to format > cell, the parameters as shown below:

  

  Kind regards

  Barry

• Print an e-mail with the date of the transmission

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  anniesol said

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  Problem is now solved! Choose the print option 'other measures' dropdown list allows email to be printed with the date of the shipment.

• Cannot create a new startup with my data disc

  Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

  The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

  In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

  I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

  Additional information:

  -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

  -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

  - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

  Any thoughts are appreciated!

  Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

• iCloud full - found two backups with different dates

  My 20g iCloud storage is full.  When I went to manage my data, there were 2 backups of my iPhone with different dates.  Can I remove 1 of them (the older one I guess) without affecting my current phone?  I guess that's when I upgraded my iPhone 4 to 5

  Of,.

  Yes, as long as you can identify with certainty the backup latest.