Performance of the app

Similar Questions

• PUSH API - openPushListener high utilization of the processor and the poor performance of the app.

  Hello

  I have a request that I tested on a real phone and I noticed that when I call the method openPushListener on the push API that the CPU of the phone shoots up to 80-100% and stays there. When I do that on the Simulator there little CPU usage at all. I made sure this isn't the rest of my application by creating an application to Subscriber very simple push that, once compiled and put on a tourch or "BOLD" takes the CPU at 100%. When I do not call this method our application runs quickly, but when I listen to the messages of push splash screens taking much time to load before have been instant and it must be down to the CPU of the stuff to push.

  Here's my basic application, when running I went to device management application options and found it my app and could see the CPU usage. before you click the link in the application below cpu is at<1% and="" after="" it's="" at="" 80-100%="" while="" the="" application="" is="" open.="" this="" is="" affecting="" both="" os5="" and="">

  !DOCTYPE HTML PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN">
  
      
          
          
          
      
  
      
          Listen For Pushes
      
  
  

  What continues? If this is the case, we cannot use it and months of development is endangered...

  Ok... The thrust of new API that is to come (in the next two weeks) do not have this problem.  We were able to get to the root of the problem.

  This CPU use is caused by the opening of several ports push.  We the have not seen happen when using only one port to push.  Although we have seen occur when more than one application uses the API to push.

  The new API is standard capabilites Push which does not allow you to open several ports by request of data push.  Several applications can use this API without any degradation.

  In short... If you only use a port with the API to push, you minimize your chances of a question.

• Cannot update 3,010 FF.; Downloaded 3.6: impossible to copy in the app folder "the operation cannot be performed because you don't have sufficient privileges for some of the itemss.

  I had FF 3.0.10 for two years. My preferences are set to automatically check updates, my for a reason, it apparently never worked. I am the administrator for my Mac and have read/write permissions. The manual "check for update" under the menu help is disabled and will not work. " I tried to reset the permissions, quit and restart several times. At a given time, the window ' check for updates ' seems to be enabled, but froze when he started the download and came back to grey again. I tried to download 3.6 on your site, but when I try to drag FF in the app, I get a message that says "the operation cannot be performed because you don't have sufficient privileges for some of the items. Through it all, I noticed that my download folder is gone from the dock on my screen

  • Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  • Trash the current demand for Firefox to do a cleanup (re) install.
  • Install the new version you downloaded.

  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• Performance of applications in the App World of device but not in the Site

  At 01:00 on Friday, I received an email saying that my app was approved and published for sale, I checked the portal provider and everything was correct. When I searched my app in App World on my PlayBook and my DevAlpha app were found without any problems, but when I tried to search in the App World web site so I can get a link to share, I could not find the app, and it is not listed in my profile App World. Someone at - he already experienced this? Is there a solution? 3 days ago and I did not always share the app because of this problem.

  In addition, I was reading this forum today and I saw vague messages about BB10 apps appears, that is the question? My application is for PlayBook and BB10.

  I can't answer why she does not appear, but you have no need to find where to get a link to it.

  Enter the provider portal and click on manage products. Click on the entry of the application itself, to access the "Edit product" page with the first 'Info' tab product  The first thing listed is an ID, as for my app battery Guru: 'ID 51274.

  Just take any app URL and replace the id with the number for your and you're good.  For my example, guru of the battery is https://appworld.blackberry.com/webstore/content/51274 .

• Installed Apps not updated in the App Store

  Updating macOS version 10.12 on MacBook Pro retina Sierra updates (end 2013) available in the App Store. When you try to update, receive the message "Apple Media Services terms and Conditions have changed. " ... To continue, you must read and agree to the new terms. I accept conditions and access updates. When you click on the app for the update, the same message again. Through accepting the terms and Conditions again and repeat the same cycle over and over again. May not know what is the problem?

  Start Safe Mode removes the system caches that can help.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to update applications.

• Unable to connect to the App Store since the upgrade to IOS 10

  Tried to restart App Store and phone. changed the password and recorded out and back in but still unable to connect. We will, get apps but when I try and download it keeps asking for the password and say that it can not connect. Someone at - it advice?

  Hello CT05,.

  Please ask for assistance with the App Store here in Apple Support communities. I understand how it is important to be able to download my new or existing applications on the App Store. Please try these things to see if we can get this to work for you as expected!

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once you have your backup, please go to appleid.apple.com on your computer or via a web browser. Log in with the Apple ID you are trying to connect to the App Store with. If it connects, take note of the Apple ID and password. Try the same information on the iPhone.

  If this still does not work on the iPhone, please click Settings > Wi - Fi and turn Wi - Fi off. See if you can access the App Store on your cell data. If you can, it means that it some security on the wireless network that you are connected to that is blocking your connection. You won't be able to do this unless you use your cellular data or move you to a new wireless network.

  If you are not able to access the App Store on cellular or wireless data, please open this help article: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Check the section still not 'connect?' and look at the instructions to reset the network settings. What this does is actually reset some of your default network settings. You have to reenter your password to connect to wireless networks once this is done. Try again.

  Thanks again and have a great rest of your day.

• How to upgrade to iOS 10 as 'clean' as possible without losing the data in the App

  Hey guys,.

  iOS 10 is around the corner and, therefore, I wonder now how I can improve my iDevices (5s, 6, Air 1, mini 2) as clean as possible, i.e., ideally without the remains of previous versions of iOS, while keeping all these backups of Angry Birds and iMessages. This used to be no problem because I would just do a restore DFU, "Set up as new iPhone", install all the applications manually and restore the backups and iMessages by iExplorer. Then Apple removed the app data access in iOS 8.3 and above, who killed this option

  Since iOS 8.3 I have upgraded to major releases by removing your existing backup and creating backups completely new immediately before executing a DFU restore to the new version, and then reloading your backup come on my device.

  However, I am sure that this leaves still unwanted remnants of installed earlier, I really want to get rid of (so my devices also perform smooth and free of bugs as possible, with as much free space as possible). One of my ideas to get there is to delete all applications without data important app and 'Reset settings' before creating a fresh backup, do a DFU restore, restore the backup and finally reinstall and reconfigure the previously deleted applications.

  Does make sense? That guys would you recommend?

  See you soon,.

  Daniel

  Please read iOS 10 - official Apple Support.

  However, I am sure that this leaves still unwanted remnants of installed earlier.

  Is not, is there a need or benefit to the removal of the existing iCloud backups.

  You're overthinking not too much of the case. There are only two basic steps: backup and update. If you have an Apple Watch, follow the third stage also: update your Apple Watch. That's all there is to it.

• Update iTunes 12.4.3 stuck on the App Store

  The App Store loads this update iTunes to 30.2 MB out of 236 MB and then stops with 'calculation' displayed next to him. I tried to delete the items in the folder/Library/Updates and perform deletion suggested in the Terminal commands. The best I've done is to erase the progress in update so it starts again, but he always stops in the same exact place at 30.2 MB. Any thoughts on how to proceed?

  Hello..

  • Applications such as Little Snitch, Growl and MacKeeper, can prevent the download updates
  • Disable the anti-virus software is installed
  • Check the firewall in system preferences > Privacy & Security > firewall > firewall Options
  • Make sure that gatekeeper is activated

  Open system preferences > Privacy & security, then select the general tab.

  Make sure that the Mac App Store or Mac App Store and identified developers is selected.

  If this area is grayed out, click on the padlock icon to go forward.

• This identifier apple has not yet been used with the App store.

  I bought my macbook pro to my brother and always used without my Apple ID and then I decided to restore the macbook to the factory because of some problems with the performance setting, when I hit install OS X Yosemite on the disk, it asks you to login Apple ID and when I try to login with my account , he says "this identifier Apple has not yet been used with the App store" Please check your account information, when I hit "see" nothing happens and it of kind of stuck and makes me restart the process and enter my apple ID and password. "

  I don't know what the problem is and now I can't open my macbook to use

  Because the computer has been configured using Apple ID of your brother, it is bound to this ID. If you have never downloaded Yosemite, you can not install it. Ask your brother to insert his Apple ID, so you can get the computer operational again. Then, go to the App Store, sign in with your ID and check the purchases tab to see if the Yosemite is an option. If this is not the case, download El Capitan and see if it will install. If you want to do a clean install, quit the installer and the program below allows you to create a bootable USB key. Boot from it, wipe the hard drive and then install El Capitan. When you restart normally it will be your computer. See also the link for sale.

  Bootable USB Flash Drive-Diskmaker X

  Sale of old Mac (4)          Apple support

• I can't redownload the app Pinterest

  whenever I try to re-download it, it loads and then goes back to the cloud with the arrow! Help!

  Try to reset the App Store:

  Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

  Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

  Then sign into the iTunes Store and try to download again.

  Also check the settings > general > Restrictions > and make sure that iTunes Store, Apps install, delete the Apps and In - App purchases are all under the section allow.

• Badge of the App Store is not extinguished after synchronization

  Because of the way iTunes/iPhone now manages updates, I have been updated on the phone and iTunes before syncing.

  Today, I tried to update an application in iTunes (but not on the phone) and then perform synchronization to avoid two downloads.

  After syncing, I went on the phone and the app has changed to be opened, but the App Store badge has not disappeared. The phone always shows that the app is available for the update (did not move, down to the section update), but shows that the application is open.

  I turned the phone off and opened it to new, but has not removed the badge. App Store app has no option to disable the badges in the preferences. I did a second synchronization without change. In the preferences, automatic updates has always turned off. I turned on and off again without change.

  The app has been deleted on the phone but it still showed open in iTunes. I deleted in iTunes, then reinstalled the app on the phone with synchronization. The badge is still there and shows is open, but still shows in the section update available. I did remove/reinstall 2 times more.

  I'm going back to update an application on the phone and iTunes before syncing but the need to get the phone with a demonstrated that it app has been updated and turn off the badge!

  A 'solution' just happened.

  After removing the application on both the phone and iTunes, the badge has remained.

  However, a new update for another application came and the badge has indicated that an update. After updating to the new app on the phone, the badge has disappeared.

  Assumes that the solution is to wait for a new app update remove the badge.

  Very frustrating to spend so much time on one kind of bug.

  I won't let NO iTunes update apps for the phone through the sync again!

• Cannot load sites http but https are ok - as impossible to connect to the App store

  Hi people, for the first time I have a serious problem with my Mac and 10.8.5 and I hope to find some help here.

  The problem:

  All of a sudden (no idea of what happened, why it happened) I can not open Web sites beginning with http, for example http://www.advrider.com

  The error message is: unable to connect

  However websites like Facebook, this forum etc i.e. all sites beginning with https://... properly.

  This is valid for Firefox and Safari.

  Thunderbird works fine but the I can't connect to the App store.

  The problem is that I don't know yet where to look to find the problem.

  I did some fishing (without a solution)

  -verification of DNS settings (use 8.8.8.8 and 8.8.4.4)

  -Clear cache

  -Re-install point AP

  -switch to another Wifi network (currently in a hotel and there are supposed to be two totally independent networks)

  -turned off the firewall

  n ' use a proxy

  My wife with El Capitan Mac works fine on the same network, but because I don't know what to look for, it makes it almost impossible to compare the settings one by one.

  No idea what to do?

  Post edited by: Kuhjunge - another mac works fine on the same network.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Delete all files in the pictures library, the app still occupies the same space

  An attempt to free up storage space, I exported all my photos and then deleted within the app (Image-> remove all). However the Finder shows that pictures library takes up the same amount of space as before I deleted my pictures.

  How can I make sure that everything is deleted and I get my free space?

  Thank you

  Dima

  Stop, and then perform a boot cold upward

• Why the App Store search function does not work?

  Since the iOS most recent update (9.3.2), the app from the App Store does not work on my iPhone-iTunes app works perfectly, the App Store - space wasted on the screen and memory right now. I tried to disconnect, close the software, restart hard to my phone, but all I get when I try to search is a white screen. I can't even comment to apple in the app because it does not work. It was a time where this kind of thing never happened but the versions of software with major bugs is becoming more of a recurring theme lately. I'm really starting to wonder if Apple jumps right away even the most basic of pre-tests prior to publication just to get out a release. Frustrating to say the least.

  The search function on the App store on my phone work if something is wrong with your system. Try to reset the App Store in the following order:

  Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

  Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

  Then reconnect to the iTunes Store.

• I m using ipad mini I got the app store update message about garageband 2.1.1 and I hv software download full GarageBand via itunes, but cannot be installed software bcz itunes sync error

  I m using ipad mini I got the app store update message about garageband 2.1.1 and I hv software download full GarageBand via itunes, but cannot be installed software bcz itunes sync error

  Try to reset the App Store:

  Close the App Store completely from the window of the selector app by double clicking the Home button and slide up the App Store preview pane until it disappears from the display. Then sign out of the iTunes Store (in the settings).

  Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

  Then reconnect to the iTunes Store.

  Also try by going to settings > general > Restrictions > and make sure that iTunes Store, Apps install, delete the Apps and In - App purchases are all under the section allow. Try to install again.