Performance on the Repeater with DataPrvider

Similar Questions

• How to increase the performance of the computer with the first?

  I have problems with rendering long time drops latecomers / jumping and audio on complex changes with Premiere Pro cc 2014 even with active CUDA.

  I would like some advice in the adobe community for what first put on my computer for him to run more smooth with the first and the rest of Adobe programs.

  My system specs are:

  Windows 7 64 bit

  8 GB RAM

  NVIDIA GeForce GTX 550 ti GPU (drivers day)

  Intel core i5 processor clocked @ 3 .00GHz

  I was informed of some friends IT computer and some players that I would see the further performance with a better graphics card. But after the execution of the afterburner msi program to monitor the use of all during an export of a short film he showed the CPU 96-100% most of the time when the GPU only varies from 38 to 54%

  If the first is the use of CUDA, so the GPU use should not be much higher? Maybe I'm missing a setting that I need to tinker? Or do I really have to invest in a better processor?

  Thank you for all what is recommended can offer me!

  -Taylor

  There are SO many things that could in how any computer running these programs... In the "Presentation" of this forum page, note in a Panel on the right side, the "Hardware" forum... Please go ahead and ask a few questions. In addition, the Tweaker ( Page of tweakers ) Page is a vast resource of information, tests and test data.

  Basically... first thing to note is the CPU, the number of cores is cache, clock speed, then the way the motherboard integrated this into RAM, video card, & home readers (the bus system & drive connections), then the GPU and the table of drive you are using.

  -CPU: more hearts always better of course, and "virtual" cores do not count. Your i5 is a minimalist for the Adobe DVA. My i7 is a little better, but still not nearly "ideal." Mine has so-called 'eight' hearts, but four are virtual... not true. These programs will be in cloth the real parts of the processor, there is no extra wait States to charge things to put cache & back into 'virtual reality '. Clock speed is of course a biggy and not only as high as you can go, but settled at a speed that works best with the system bus & the RAM and the GPU. There are ways to understand this saying, of course. It's complicated.

  -RAM: 8 your casual work is barely enough for the operation. I'm 16, and it is nowhere near enough. 32 is pretty decent, and I drool on people with 96 + GB of RAM and a mobo which uses actually all this.

  -Mobo: the flow of the thing... and the flow over your mobo has through the system bus/s best. And such things like... how many connections drive there? You will eventually need to connect disks 6 or 8 for best performance... can you, without the data to all readers bunging autour each other on the bus to the mobo?

  -GPU/vRAM: get a hot card is cool... but ONLY if your machine can handle it. My GTX770/4 GB of vRAM is really a little overkill for my current system. Understatement. A good GPU for the use by you (it has graphics on the page of the Tweaker) with a few GB of vRAM and nuclei of a CUDA AREA traveling at a pretty decent speed when matched to the CPU/system frequencies... Yes, the good card is awesome... too card is a total waste of money, too little and you have created a choke point. GPU is only used for certain things, isn't quite the Holy Grail we often think that it is.

  -Readers: There are a LOT of read/write of data going on constantly. USB3 is NOT sufficient for reading/writing, but it can work very well for reading only, like the standard images (but not 4 k stuff). Essentially, readers must be connected to the mobo directly... and a very recommended layout is OS/programs/pagefile on a FAST SSD large (and no, they are not all the same); Another SSD for things like the previews, cache & database PrPro files and then be separate discs for the projects, footage, & exports or even better a hardware RAID 0 of 4 or 5 2 TB hard drives for files in project & footage.

  As we always say on the Page of the Tweaker, the system runs faster the point of choking more slow. You have to understand that one...

  Neil

• Wireless Internet does not work. I get the error: "no operations can be performed on the LAN with its media disconnected in CMD".

  Hello, I followed the steps in the previous thread... Thank you.

  Im getting the message "no operation can be performed on LAN with its media disconnected in CMD"... help.

  My wireless will open any Web pages, although it seems to be connected and trouble shooter saying "DNS does not.

  original title: "DNS does not.

  Hello

  1. don't you make changes on the computer before this problem?

  Step 1: Make sure that switch WLAN is not turned off. To do this, you may need to consult the manual of the computer.

  Step 2: Reset the TCP/IP and WINSOCK stack.

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  netsh winsock reset catalog

  netsh int ipv4 reset reset.log

  netsh int ipv6 reset reset.log

• Debugging the performance of the device with Java Plugin for Eclipse

  I'm trying to debug my application on the device running with the java plugin for eclipse (4.7), I've updated lately. The first eclipse of the done thing, ask my code signature password, then load the application on the device and the discovery of the time that the device is not connected, because she did a reboot after loading the application. How can I prevent eclipse from loading the application on the device?

  http://supportforums.BlackBerry.com/T5/Java-development/launching-application-on-device-from-debugge...

• Monitoring of the performance of the disk with Hyperic

  When we look at measures of performance "fileserver mount" on one of the platforms of my, I saw that the monitoring interval was shown as "varies". Wanting to know what it means, I clicked on the 'i' icon next to the word "varies". It showed that I had only a few points of collection of data per month. Why is this?
  
  This is (for the most part) what he showed me when I clicked on the "i":
  Queue drive metric name Platform)
  Debit category
  False witness
  Dynamic Type collection
  Basic units no
  Alias DiskQueue
  
  What is a type of collection 'dynamic '?
  Why can't I have this disk queue length collect every minute?
  
  The collection interval "varies" was also applied to drive bed and written records.
  
  Brian

  "Varies" refers to the case when the metric for the same metric collection interns through a group resources vary. If they all had the same interval, you would see the real interval.

  And regarding the types of dynamic collections, see the Plugin able to provide explanations about types and their meaning:

  http://support.Hyperic.com/display/DOCSHQ31/measurement+plugin

• Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

  

  I did it with a 32GB SDHC UHS - I Transcend

  

  I do not recommend under OS X from such media, but it works very well. I was preparing for my review of the CPHA Yosemite and did not want to mess with the internal drive of OS X.

• 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

  Hello

  I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

  Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

  My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

  Thank you very much.

  My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.

• Using a control of the chain with the Enter key, return * and * allowing repeated identical entry

  Hi all

  There must be a simple solution for this, but it's Friday afternoon, and my brain is not cooperating.

  I create a simple terminal through which a user can interact with an instrument. My question is about the only query string control. The button send and the Terminal Table are here for reference.

  

  Here is my desired behavior:

  (a) the user types a command in the field of the query, tape input or return. An event is triggered, and the request is sent to the instrument. The focus remains on the field in the query.

  (b) with any other action the interface user, the user types Enter or return again and again, by triggering an event that sends the request to the instrument every time Enter or return is typed. The focus remains on the field in the query.

  Here's what I have:

  

  This allows for one), but fails to b). The reason is, because the value of the field in the query has not changed, change value event does not fire when the user starts to spam keys enter or return. There is a way around this, as suggested by this post. Here is the solution in a few words:

  

  Instead of looking for the change in the value of the query command, the event fires for each key event to the bottom of the control and resembles a pressure of enter key or return. What attracts the user action, even if the content of the field of the request have not changed. The problem with this approach is that, when this event fires, I need to read the value of the query string order and send it to the instrument, but the value I get via the local Variable query is the old value, probably because the key down event fires before the value of query is saved as changed. Is there a way to programatically "enter" the contents of the control channel so it is recorded as a change in value, until I have the question via a local Variable? Is there a different way I should go about it? I'd rather not do anything that bound the input keys or return to this particular area, since I have many other UI elements that need these keys in my program.

  If not, is there a way to make the control of the fire 'Change of value' query string event when the user presses enter or return even if the value has not changed?

  Thank you for your comments!

  I thought about it.

  (1) control of the string (query) a value of update while typing.

  (2) save the key event down to the control of the chain. If the entry or return was pressed, send the state machine to the State 'send request '.

  

  (3) in the application 'send' State read control channel via the local Variable value.

  

  This is the desired behavior to allow the user repeatedly hit entry or return to regularly send a command, and the user can also type in a new order and send it by pressing enter or return.

  Thanks to all who have helped me this something to think about!

• How do I optimize the performance of windows 7 with freeware tool or tool?

  How do I optimize the performance of windows 7 with freeware tool or tool?

  Hello

  As Frederik advised, saving No. tune-up, not so-called Optimizer program, no registry cleaners should be used.

  See if this helps you improve performance.

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• can perform us two actions with a single button in two clicks, one after the other?

  Mr President.
  
  can perform us two actions with a single button in two clicks, one after the other?
  
  I want that when I click on the button Add once it add data to the database and when I click again on this button it clears the form data to the empty fields.
  
  Concerning
  
  Tanvir

  In the code, it should be easy.

  The following code adds that a button called butman with text 'ADD '.
  It then registers a listener that will be called if the user clicks the button.

  This listener then calls the runAddData method if you clicked butman while it contained the text of "ADD" and it calls the runClearData method otherwise.
  That's why he will swap the functionality of the button between ADD and CLEAR on each click.

  final Button butman = new Button("ADD");
  butman.setOnAction(new EventHandler() {
            @Override
            public void handle(ActionEvent t) {
                      if (butman.getText().equals("ADD")) {
                                butman.setText("CLEAR");
                                runAddData();
                      } else {
                                butman.setText("ADD");
                                runClearData();
                      } // END IF-THEN
            }});
  

  I hope that's what you wanted.

  Further reflection.
  You might want to run the ADD and CLEAR methods in their own son so that it can run in the background without slowing down your user interface.

  I also reuse rather a single button for several features instead of to apply with hundreds of nodes used only rarely with masses of code to show and hide as needed.

• getElementById() JavaScript does not work with the repeat regions

  I have tries an onmouseover and onmouseout to exchange all divs that recur in a repeating region of php and javascript doesn't seem to work for the first rehearsal of div. Is it because the repeat region creates a lot of identical divs and javascript code is confused?

  The following is a very simple version of my code setup which explains my problem:

  I create a forum where the individual comments are included in their own div ("commentDisplay"). To do this, I created a div and create a repeating region around it so that php will debit all the comments of each of them to give a copy of this div.

  for example:

  <? PHP {? >}

  < div class = "commentDisplay" >

  <? PHP echo $row_whateverRS ['whatever'];? >

  < / div >

  <? } while...? >

  Now, I wanted to create a simple javascript when the user moved their mouse on the station he would hide this div and display another div that holds the same content, but still had a background of different color and, most important, gave the user a chance to respond to the post (similar to the youtube comments section). So I created the following:

  < script... >

  function hideDiv (id) {}

  document.getElementById (id).style.display = 'none '; }

  function revealDiv (id) {}

  document.getElementById (id).style.display = 'block '; }

  < /script >

  and then I created this another div ("commentSwap"), which held the same information, but with a different background and an opportunity to respond (and with display: no) and insert the javascript code:

  <? PHP {? >}

  < div class = 'commentDisplay' onmouseover = "hideDiv ('commentDisplay'); revealDiv ('commentSwap')"onmouseout ="revealDiv ('commentDisplay'); hideDiv ('commentSwap') ">"

  <? PHP echo $row_whateverRS {'some']:?} >

  < / div >

  < div class = "commentSwap" >

  ... same-except the ability to answer

  < / div >

  <? PHP} while...? >

  the problem is that the code seems to work for the first rehearsal of the div and not the rest. In addition, when I move my mouse over the other div it causes the first div share.

  Why is this? Is it because all the Extensible divs (through the repeating region) all have the same name and confuse the javascript?

  Thank you

  YWSW

  YWSW wrote:

  So what do you suggest what to do instead (to produce the same see the div / hide div div result in a repeat region?)

  As shown by the fact that you can not have more than one ID on a page, my suggestion is to create the unique id in your loop. Database table has a primary key with the numeric IDs. As a result, the loop by adding the unique ID of the recordset object to the id of the div that is played repeatedly. Observe the provided code.

  ... same-except the ability to answer

• Performance issues and options to reduce the loading with the Oracle text implementation

  Hi Experts,

  My database on Oracle 11.2.0.2 on Linux. We have Oracle implemented for the fuzzy search. Our oracle text indexes are defined as sync on commit that we cannot afford to have stale data.  Now our application done literally thousands of inserts/modifications/deletions of these columns where we have these Oracle text index defined. Thus, we see a significant impact on performance because the oracle text synchronization routines is called on each commit. We do nightly index optimization (optimization full every night at 3:00).  The text index oracle internal operations are appearing at the top of the sql page in our AWR report and fears it causes a lot of load on the DB.  Since we do optimization of the complete index once during the night, I think I should change that, and if I do, he's going to help us?

  For example, here are some data of AWR report my one day:

  Time elapsed (s)	Executions	Time by Exec (s)	% Total	% CPU	%IO	SQL ID	SQL module	SQL text
  27,386.25	305 441	0.09	16.50	15.82	9.98	ddr8uck5s5kp3		Start ctxsys.drvdml.com_sync_i...
  14,618.81	213 980	0.07	8.81	8.39	27.79	02yb6k216ntqf		begin ctxsys.syncrn (: idxownid,...)

  
  More top sql full text:

  ddr8uck5s5kp3	begin ctxsys.drvdml.com_sync_index (: idxname,: idxmem,: partname); end
  02yb6k216ntqf	begin ctxsys.syncrn (: idxownid,: idxoname,: idxid,: ixpid,: rtabnm,: flg); end;

  Now if I do optimization of the complete index that more often, and not only once night 15:00 will be this average, the load on DB sync on commit will decrease? If Yes, how many times should I optimized and the optimization itself does not lead to a load? Can anyone suggest?

  Thank you

  OrauserN

  It's to you which values you want to experiment.  Since 1 G, which is the same as 1024M is the maximum I could try that assigning to an index and see what effect it has.  You can use the same AWR report that you used previously and compare performance.  To determine when paging depends on your operating system and what tools you have.  Another option might be to use TRANSACTIONAL, that allows searching for unsynchronized lines and allow you to synchronize every five minutes, like Herald suggested, without any latency problem.  You can read about it here (scroll down to transaction):

  http://docs.Oracle.com/CD/E11882_01/text.112/e24436/csql.htm#CCREF23731

• Problem with the repeatable nested forms

  Hi all

  I'm having some trouble creating 3 reproducible forms inside another form of reapeatable. My XML structure is similar to this:

  -< tasks >

  < id > 3139 - 13 / < ID >

  < startDate > 2012 - 10-01 T 04: 00:00Z < / startDate >

  Costs of preparation of tax < name > < / name >

  -< weekTable >

  < weekNumber > 49 < / weekNumber >

  -< data >

  < service > accountant < / service >

  < servicePerformer > Alex < / servicePerformer >

  < hours > PT5H < / hours >

  < rate > 45.000000 < / rates >

  < / data >

  -< data >

  < service > agent for Fund < / service >

  Malinda < servicePerformer > < / servicePerformer >

  < hours > PT3H < / hours >

  < rate > 0.000000 < / rates >

  < / data >

  < / weekTable >

  -< weekTable >

  < weekNumber > 40 < / weekNumber >

  -< data >

  < service > agent for Fund < / service >

  < servicePerformer > a. Major < / servicePerformer >

  < hours > PT4H < / hours >

  < rate > 0.000000 < / rates >

  < / data >

  -< data >

  < service > Support < / service >

  < servicePerformer > Leslie < / servicePerformer >

  < hours > PT10H < / hours >

  < rate > 0.000000 < / rates >

  < / data >

  < / weekTable >

  * 2 more reapeatable structures similar to < weekTable >

  < / tasks >

  I do repeat weekTable based on the number of data items, but I couldn't do the repeat tasks.

  Is it possible to do?

  Thank you very much!

  Felipe.

  Make sure the subform parent of the subWeek is set to Flowed. Link that to $.tasks [*].

  Kyle

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• All I'm trying to open the files immediately through the "open with" window

  Here's what I think happened, I downloaded Irfanview and since all the files, I try to open the "open with" box comes up. Also missing from the sidebar. I deleted the Irfanview thought that would fix, but it didn't, so I tried to reload to see if I could find the problem but couldn't find that open with the program to use to bring it back.

  Hello

  See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.

  Try Mode safe mode with networking - repeatedly, press F8 that you start.

  The best two methods allow scanners to run and/or AV.exe out of the way or removing.

  1.
  CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager

  Process tab - complete the process on AV. EXE and continue with the uninstall Guide.

  If necessary use start - computer or Windows Explorer to navigate to

  C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
  necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
  is installed.

  Right-click on it and rename it to ZZMbam.COM (or something different than now), then
  Double-click it and run it like this. You can rename it back later. Do the same with others
  programs as needed. Use this method for other necessary - DO NOT ASSUMER one
  program removes all or that there is no other malware.

  ---------------------------------------------------

  2.
  Another method is to use them:

  Use Process Explorer to "Suspend" the process will not stop

  Then use AutoRuns to delete the malicious program startup items.

  Now use UnLocker to delete the files in the malware.

  You may need to do a file at a time.

  Process Explorer - free
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  AutoRuns - free
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  UnLocker - free (do not install the adaware Ebay)
  http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtml

  AV.exe

  ==============================================

  There are MANY varieties of these with many names, but all can be eliminated with the same methods:
  
  Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
  scams to get you to pay for them while they have no advantage at all.

  How to remove all THE varieties of this malware - please read carefully the removal Instructions.
  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010

  RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
  
  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
  in the regular when windows you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
  UnHackMe execution)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download
  here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
  It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
  How to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
  Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
  taken (such as the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.