Equium is not lit

Similar Questions

• Qosmio F50 - 10K - multimedia keys are not lit

  According to my topic

  "" Qosmio F50 - 10K - replaced by Qosmio F60-126? ".
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59934&TSTART=0

  I had problems with my laptop, located at the Nvidia 9600 M GT graphics according to Toshiba service. They changed the graphics card with a new one today and so far everything is going very well and smooth. He collapsed again. Time will tell whether or not it returns to his old ways.

  In any case, after I took up my F50 - 10K I noticed that the indicators for media buttons (Play / Pause, Stop, Dolby, etc) are not lit. The buttons work fine, but they are not on. All other indicators (the light bar on the touchpad, the volume light) and the power light work fine. There is a button to deactivate/activate the indicators, but it does not work for media indicators.

  Before giving my laptop to the service of all the indicators were at work. Now, the indicators of media came out. No idea how to re-enable?

  Hi Jwrath,

  I doubt s a hardware problem because they do not work properly and the lit / functions are controlled by added value package. In your case, I recommend reinstall Toshiba Value added Package from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove the VAP, restart the computer and install the new VAP software.

  In addition, check the BIOS. I don't know if there is an option for Mr. lighting if so, enable it and that s.

• Control Panel more HP Officejet Pro 8600 not lit and will not work

  Control Panel more HP Officejet Pro 8600 not lit and will not work. It worked except the last 4 days. I can use certain features of the computer as a scan but can not manually use Control Panel. Nothing DOES not illuminate. The power button is on but only weakly.

  Hi kwhofms,

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• Songs by repeating the same if the repetition is not lit

  Hey guys, I'm new to this forum and I have a problem. My e260 continues to repeat the song even if the repetition is not lit. usually I could push the button before jumping on the right side and he would return to the menu music (one that has options, the artist, album etc...)

  any help here?

  Access songs (music > songs) and look at the alphabetical list.  At this level, you see if all the titles appear two times.  I had this happen when you transfer an album to the microSD card, then swap to another player who has the same album in the internal memory.  The songs on the map will display a small map icon next to them.

  If you transfer a track in MSC mode, then back to PSG, you have duplicates, since from the PC, you will not see both modes at the same time.

  Finally, if you use audio formats or codecs, lists the two versions of the song.  For example, I have FLAC a MP3 copy, as well as a copy of a song in memory (the e200 has not been granted ability FLAC, but the same thing will happen if we have a copy the other MP3 and WMA).

  Bob

• Envy Touchsmart M6 Sleekbook screen works but is not lit

  Hey guys. I went to open my laptop yesterday and the power came the keyboard lights but the screen do not have. I was trying to understand if it is a physical problem or a software problem. It turns out that, when I plugged it into another monitor with a HDMI cable, the computer is always on and I can use it. Because it is a touch screen, I tried to use the screen to browse the Internet and it still worked. So, basically, the laptop still works and the screen works (because I can browse the Internet by using a different screen and the touch screen still works), but the screen itself is not lit. This sounds like a software problem or a physical problem? What ideas you guys have to fix? Thank you

  Hello dblack678,

  Welcome to the HP Forums! I hope you enjoy your stay!

  I understand that your computer screen is not lit. I'll do what I can to help you! To help you properly, I need the following information:

  1 the model number of the computer. If you need help to find this information, please see this site: find the model number of the computer

  2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

  3. have you installed new hardware on this computer, before the problem appeared?

  4. have you installed new software or drivers on this computer, before the problem appeared?

  However, since it is a new unit, I would just contact HP support. They will resolve the issue quickly, or service or replace this computer. You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide

  Please let me know if you have any questions or concerns. Thank you for choosing the HP Forums. Have a great day!

  Mario

• Equium A60-155 - Wireless is not lit

  Recently, I have an old Toshiba Equium EA60-155 off a friend for my nephew because he doesn't have a computer. It didn't work, but I would like to fix things.

  It was designed for XP and only has 768 MB of RAM, but works very well that now, I put XP back on except a problem. There were a couple of missing drivers, that I found and installed, BUT it doesn't have a wi - fi card.

  I plugged an old Wireless LAN CardBus PC Card and had the driver for it. Bulbs work on the map, and everything is OK in Device Manager. Even the Windows Wifi can capture my network.

  The problem is that the current Wi - fi does not seem to be on. Well the front light is not on. However, there is no power switch on this model.

  There is the Fn F8 button, BUT it seems to be the only Fn button that does nothing. I had to install a few other drivers for the other Hotkets, etc... at work, BUT I ran out of drivers to install.

  I guess that there must be a driver or a program that activates the key F8.

  Anyone has any ideas, I have searched high and low and most of the ideas for getting knowhere.

  Hello

  Until we start discussion here is the list of the old satellite facility.

  Windows XP Home Service Pack 2
  DirectX V9.0c (SP2)
  Driver Chipset + display + IDE ATI V6.14.10.6430
  Realtek RTL8139/810 x Family Fast Enthernet NIC Driver V5.6102.1125.2003
  Realtek AC 97 Audio Driver V5.10.00.5510
  CardBus PCI TI-1620 with UltraMedia controller pilot V1.0.0.9
  Synaptics pointing device driver V7.10.8
  SMSC IrCC driver V5.1.3600.3
  TOSHIBA Software Modem Driver (+ region Select utility) SM2138ALD04
  Driver LAN wireless (Atheros) 802. 11a / g g V3.1.2.12i112
  Wireless LAN Utility (Atheros) 802. 11a / g g V3.1.2.19i123
  TOSHIBA Hotkey Utility V1.00.12SA
  TOSHIBA Hotkey Utility for display V1.00.03SA
  Utilities TOSHIBA V1.00.10SA
  TOSHIBA Power Saver V7.03.04.I
  GST init V1.0.4.0
  TOSHIBA Console V3.04.00 for Osaka (SP2)
  ConfigFree V4.90.56
  TOSHIBA Speech System V1.00.1531
  TOSHIBA zooming Utility V2.0.0.18a
  TOSHIBA Touch and the launch of V1.2.4.1 for Osaka20
  TOSHIBA V3.05.0902 controls
  PC Diagnostic V3.0.6 tool
  Silent acoustic CD/DVD V1.00.005
  SRS WOW XT plug-in V1.0.2EN
  Driver DVD-RAM V3.1.0.0
  WinDVD V5.0B11.288 - SRS
  WinDVD Creator2 Platinum V2.0.14.310English2
  Sonic RecordNow! V7.22 Build720B36Y
  Sonic DLA V4.95 build 490B28B
  Toshiba SMBIOS ActiveX Control V1.3
  T.BIOS'CEO Driver V2.5USB1
  TOSHIBA Solutions V1.0

  This checklist and make sure that you have installed everything you can find on Toshiba download page http://www.toshiba.eu/innovation/download_drivers_bios.jsp (archive). some things you won't find on the download page, and it is not so important.

  Please post comments.
  > BUT it does not have a wi - fi card
  By the way: If there is no internal WLAN card FN + F8 functionality is not so important.

• Equium A200 - not lighter in the EQUIUM label

  I applied Windows Vista SP1 Italian in my Equium A200 (PSAE8E) and updated the latest version of the bios to 2.20.
  Everything works great and now under the words blu EQUIUM light is off.
  I'm happy not to lose any more power for lighting the EQUIUM words, but I wonder where there is a control for this.

  This LED can be enabled/disabled in the BIOS. Please, enter the BIOS settings, go into the advanced settings and check the last option. I don't remember the exact name for it, but you will find it here.

• My Equium A60 not startup after Windows update

  Hello.
  I have an Equium A60 (PSA67E) about 1 years. There has been many problems with this one recently. First, there was the problem of overheating. The machine would heat up and stops by itself without any warning. I tried many options by keeping the cooling ports clear but dint help not at all.

  I've recently updated my bios version 1.90 such suggested by Toshiba. I always see overheating so far after the bios update.

  The most annoying is the display driver which is in this case a lack of mobility radeon ATI 7000. This would cause the display to become oversized and the resolution is very low. It would go without saying when I restart the machine.

  Last month, I reformatted the machine using the Toshiba Recovery CD. Everything went well until I am passed on the automatic update of windows. The first update coming, and I install and reboot the machine to let it function. He's fine. Comes the second update is installed and I have proceed to restart to allow functional upgrades, it does not start. The machine keeps starting over and over again without loading the OS. The screen is the typical Toshiba boot screen with the yellow light (charger) on the screen and after some time a blue screen is delivered for a short time (I am unable to read this error message it is said) and the machine starts start again. What can be the problem?

  I need to install windows XP SP2, and for this I need to go through the Windows Update. What can be the remedy and on the update of the available display driver. I tried, but it makes the situation worse.
  I used the recovery CD at least 20 times that there is no alternative. I tried to start in safe mode but din't work.

  Hi, Germain,.

  According to your description of the problem it doesn't seem to be anything wrong with what you have done so far, but I just want to clarify a few points.

  1. After installing the recovery CD system you install/activate your anti-virus software?

  2. are you using Windows Update in automatic mode or you manually select the update process?

  I recommend you to turn off automatic error (Advanced tab in system properties) reboot so the system will not attempt to restart when you get your blue error screen. This will allow you to see what error.

  Kind regards

• Audio driver for Equium A300D not working or projection

  No idea how it happened to my computer is a new only 1 week and sound works perfectly well.

  All of a sudden it will use in reading and on computer but not in the record I could play to others on another program for example.

  Equium a300d on vista

  I tried the audio drivers from the Toshiba site, but nothing seems to work.

  Please help :(

  Hello

  If he worked several days ago then I guess this must be a matter of software
  I really put t understand what you exactly do but try to overthrow the BONE until the point of time at the beginning, when this sound function worked correctly.

  A question:
  Did you also check the sound settings in Device Manager?
  Select this check box.

  Go to devices-> sound Manager and check the second tab called record.
  There you have to right click and mark the two peripheral options see the disabled and do not show not connected peripheral.
  Then mark the new recognized audio devices and enable it.

  Further, you should try to update the BIOS because a lot of strange problems can be solved by the BIOS updated.

• OfficeJet pro 8625: display is not lit but the printer is powered

  8625 Officejetpro screen won't lite printer prints but cannot use the screen to select one of the options

  Well this is not a good sound. Powered on, unplug the printer and let it sit for 10 minutes. Now, plug it into the wall outlet with no power strip. Try now.

• Linked clone not lit after reconstitution.

  Hi all

  I have a few persistent linked clones who don't return to a State "accrued" after restructuring.  This happens only once they have a user assigned to them - if I recompose before the user is assigned, the clone is powered on and 'available' after the restructuring.

  For example, the settings of the pool are:

  Max N° work stations: 3

  Number of spare desktops (lit): 3

  Available to all initial workstations

  They are all should not be all lit and available after a restructuring?

  I noticed this after our upgrade.  I simply put my power over policy to ensure that computers are always on and my problem was solved.

• Watch is not lit and it is fully charged

  Hi, my watch is fully charged, and I went to put it on and noticed it is empty and it lights up at all.

  Hello

  Follow the instructions below...

  If your screen is black or frozen

  If your Apple Watch is in the reserve market or has a low battery, it will not respond to the action of the wrist or taps on the screen. To reactivate your Apple Watch, press the side button. You should see the time on the screen.

  • If you see all the time, you should leave the Power Reserve. Continue to hold the button until you see the Apple logo. It may take up to 10 seconds.
    
  • If you see next time, you need to load your Apple Watch.
    

  If you still need help, try to force your Apple Watch to restart. Hold the digital Crown and side button at least 10 seconds until you see the Apple logo. Force your Apple Watch to restart will not erase information or return your unit to the factory settings. If you see the Apple logo, but your Apple Watch shows a black screen after it restarts, and you hear a description of what is on the screen, the VoiceOver screen curtain may be on. To turn off VoiceOver:

  1. Open the application shows on your iPhone.
  2. Tap general > accessibility > VoiceOver.
  3. Turn off screen curtain, then disable VoiceOver.

  If you do not have your iPhone, you can ask Siri to turn off VoiceOver:

  1. Press and hold the digital Crown until your Apple Watch taps you.
  2. Say 'Disable VoiceOver.'

  If your Apple Watch lights up but hangs when starting

  If you see the Apple logo or a red exclamation when starting and your Apple Watch seems to restart or never completely starts up, contact Apple technical support.

  Above information from here > If your Apple Watch does not respond or won't turn on

• G20: Are not lit when the Mode2 selection in Bios

  Hello
  I bought the computer 1 month ago or not, and I've just realized that it is not possible to activate all the LEDs on the front at the same time. When I got the laptop it has light buttons firs 2 (TV and music), but there is no light at all in the rest (read, file,...). I just checked the manual and it is explained that our model has 2 options: All off (Mode 1 in the Bios) and everything works (Mode 2). I thought it was normal because when I press one of these keys, it lights correctly.
  Your qosmio has all 11 LED with light in Mode2? If not, what is your problem? and what you think of the behavior of my friends? Any idea about how much time would it take something like that if I have to use the warranty?

  Another thing is that according to my manual, the front control panel is disabled by default; but mine came with it enabled, with the battery installed and quite broken box. They told me that it has never been used, but I'm not really sure now. Your computer came with the Control Panel before disabled?

  Thank you very much for all the advice!

  Hello

  As I know it is not possible to make them ON at the same time. The visual cue appears JUST at the moment you press the button. On this way, the user can see that the button is on.

  I don t see the meaning if they are all the TIME.

• Reader of CD/DVD of Equium recognizes not all files

  OK, I had this problem before and I think I've fixed it by uninstalling nero 6 but I did it again, but it's always the same :(

  My problem is when I put a CD it recognizes it but does not recognize the files that it contains.

  In Device Manager it seems that all is well no yellow exclamation point.

  I tried to delete the upper and lower values in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318} registry but no infact available when I go to register it is not less or upper filters it.

  I am at loss - everyone has ideas please

  Hello

  Have you thought about a hardware problem?
  Eventually he s has a

  But first, you should check if the laptop can boot from the recovery CD.
  If so, then try to install the OS from the Toshiba CD and this would create the laptop back to factory settings

  Then you could check if it s able to read the CD or DVD.

• Re: Equium do not work after an upgrade to MS

  I had one of these nuisances updates from Microsoft this morning so went with her.
  After turning back, my piece of trash Toshiba will not start and in a repair process that breaks down.

  I then go in safe mode which fails, restore gives only a point - falling down and everything else fails on a critical error test comes up with a code number.
  And guess what - warranty run out Sept. 29.

  Contacted Toshiba and their populations of repairs said difficult out of warranty!
  So, how can I get the seeding thing to work or will I lose hundreds of photos and videos and sue Toshiba?
  It of the second thing to go wrong with it this year!

  Any advice?

  Hi dude

  First to announce is really confused. You n t write anything on the model of your laptop, nothing on the error messages.
  You n writing t if you tried to boot from the CD recovery Toshiba or any other CDs from Microsoft.

  Have you tried to reinstall the OS?

  Sorry, but buddy I put t know what you except assignments something like that

  Then perhaps a second round will be clearer