performance problem - Hyperion Planning and Weblogic
I don't know if Hyperion Planning has a limitation on no.. user connections. We tried a performance test and found that Hyperion Planning can support around 400 to 500 connections to user under the Weblogic application server platform. We understand that Weblogic can usually take care of thousands of user connections, so we assume that it is the problems of Hyperion.We have a server configured with 16 GB of memory. But since Hyperion Planning can support max 2 GB, the memory is not the bottleneck.
Has anyone tried the maximum number of user of Hyperion Planning under one server connections?
Thank you!
You could easy find out by setting the max of the JVM to more than 2 GB, if the application server not dΘmarre, so I think it is 32-bit.
See you soon
John
http://John-Goodwin.blogspot.com/
Tags: Business Intelligence
Similar Questions
-
Problem of using IE 8 with Hyperion Planning and workspace
Has anyone tried using IE 8 with Hyperion Planning and workspace? I found that sometimes it has the error message and cannot allow users to log out.Hello
We tried IE8 with system 11. It simply doesn't get it. IE8 is not officially supported yet. And over the years, I have learned this lesson: never use a new browser, unless it is officially in charge.
You can find a page very useful here in this link to see what is currently supported for your release.
http://www.Oracle.com/technology/products/bi/Hyperion-supported-platforms.htmlAlp
-
Hyperion planning and EAS console is unable to connect Server Essbase
Hyperion 11.1.2.3.502
We had essbaae in active/passive cluster and the environment was ssl is activated.
Recently, we removed the ssl configuration
Now, we are not able to connect to the planning and the Regional service console essbase Server
Have no problem connecting to essbase maxl or view smart server. We were also able to import into fdmee essbase.
Check the data source planning and validation of all the
I am getting following error when you use the Regional service console
Essbase Server: servername:1423 com.essbase.eas.essbase.defs.ServerCommands.Connect 16 December 2015 17:57:15 EST
Error: 103: unexpected error Essbase 1030818
Error: 1040142: NZERROR: nzos_Handshake failed (28864)
Error: 1042006: error network [0]: unable to connect to [cs2chypebp01:1423]
Error: 1030818: failed to connect. Please check if the server and port are correct. If you receive timeout or handshake failure, please check if you have tried to connect to secure the port without keyword secure or disable the port with the secure key word.
When you go to the planning, I get following errors in the log files
[2015 12-16 T 19: 20:10.616 - 05:00] [Planning0] [ERROR] [HSP-09012] [oracle. EPMHSP.olap] [tid: 4] [username: < anonymous >] [ecid: 000003wIIy ^ Bp2l5ovH7iY009W4a0000OQ, 0:1] [APP: PLANNING #11.1.2.0]]
[URI: / HyperionPlanning/faces/PlanningCentral] [SRC_CLASS: com.hyperion.planning.olap.HspEssbasePool] [SRC_METHOD: createObject] Impossible to establish the OLAP connection: {0}. []
com.hyperion.planning.olap.EssbaseException (1030818)
[2015 12-16 T 19: 20:10.618 - 05:00] [Planning0] [ERROR] [HSP-09012] [oracle. EPMHSP.olap] [tid: 4] [username: < anonymous >] [ecid: 000003wIIy ^ Bp2l5ovH7iY009W4a0000OQ, 0:1] [APP: PLANNING #11.1.2.0]]
[URI: / HyperionPlanning/faces/PlanningCentral] [SRC_CLASS: com.hyperion.planning.olap.HspEssbasePool] [SRC_METHOD: getConnectionInternal] could not establish the OLAP connection: {0}. []
java.lang.Exception: no object was created successfully. This may be caused by the following: the OLAP server is not running, the DBMS does not run, the DBMS is running on a different
Rental machine as specified, the name and the password provided was incorrect.
[2015 12-16 T 19: 20:10.192 - 05:00] [Planning0] [ERROR] [HSP-09012] [oracle. EPMHSP.olap] [tid: 4] [username: < anonymous >] [ecid: 000003wIIy ^ Bp2l5ovH7iY009W4a0000OQ, 0:1] [APP: PLANNING #11.1.2.0]]
[URI: / HyperionPlanning/faces/PlanningCentral] [SRC_CLASS: com.hyperion.planning.olap.HspEssbasePool] [SRC_METHOD: createObject] Impossible to establish the OLAP connection: {0}. []
com.hyperion.planning.olap.EssbaseException (1030818)So far, we have made
We have removed the ssl configuration by running the Configurator
Reconfigure the web server
Reconfigure the web server to the logical address
Without success. Can someone help and advise you on what we should consider now
Hello
If you are able to connect to the server of Maxl Essbase.
1. I suggest you to take a look at the Source of data for planning application. Since it is an Active/Passive with SSL configuration URL would now
http://host: port/aps/Essbase? NOMCLUSTER = cluster_name
Note: ssl = true is removed at the end
2.
Change of the APS resolve URLS in the file essbase.cfg. Delete "https" and replace it with 'http' (Ref: https://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/frameset.htm?apsresolver.html )
3. Regional service Console problem
You may need to cancel some things
a. download jnlp and change the URL, remove port 443 and https. Change it accordingly to http and the port of SST (def 19000). Save and open again.
b. in the Weblogic administration Console, you must disable "Enable the Plugin" some option like this that allow us once the SSL configuration for Regional service
Thank you
Anjum Ara
-
I have a question about how essbase is related to hyperion planning. specifically, I would like to know if you can vectorize in essbase and then associate them with or have them cross to a hyperion planning an application. I read that if you make a change to an essbase outline, and then refresh the hyperion application applications settings, including an outline, will be replaced. It seems that master control is integrated with EPMA or hyperion planning because all the dimension and the main lines of work needs to be done here. However, it seems to me that there may be times where you want everything works on and change the contour in essabase and have changes go through the application of EPMA, because it's maybe easier. Is this true and if so, how do the changes so that they appear in the hyperion application that was created by EPMA.
The flow is planning for Essbase, it cannot be reversed.
If it's a planning request EPMA then the stream is EPMA > planning > Essbase
See you soon
John
-
Hyperion Planning and Smartview: build the function Description HS
Hi all
I am currently using Hyperion planning 11.1.2.2, I want to display in excel of the ad-hoc reports description of some members of the dimension through smartview.
To this end, I used the feature to "build the function:
I selected an empty cell and call the feature, a window appears with two parameters:
1-connection: this field is filled in automatically (WSFN |) HP | PC | Planning | Plane1)
2 - members list: I want to wire it manually ex: '#100 account '.
I click on validate: the following message appears: selected connection does not support this new function.select connection.
I would like to know what is meant by connection? What is the syntax of the connection string? could you please give an example?
Thank you
Best regards.
Toufik
Published by: user11081975 on May 12, 2013 12:55Hsdescription is not supported by connection of planning.
You can use it with Essbase connection.
Read http://docs.oracle.com/cd/E17236_01/epm.1112/sv_user/ch17s01s08s15.html
He talks about what are connections shared and private.
Concerning
Celvin
http://www.orahyplabs.com -
IOP 11.1.2.0 repel Hyperion Planning and Hyperion Essbase data?
In the "Oracle-integrated-operational-planning - datasheet.pdf", it says in the section "Publish the Plans for execution,"
"Once approved, revisions of the plan can be sent to other systems of planning to ensure.
alignment or ERP systems for execution. Change the data are stored in Oracle
Integrated operational planning root and review later cause analysis. »
Can you please tell me how to send data from Plan of Hyperion Essbase or Hyperion Planning (which is always Essbase data) of IOP? I looked in the Administrator's guide, but I'm afraid I missed where you can do. Could you please direct me to the appropriate guide?
Thank you.We don't support snapshot using MDX query command to export almost any segment of the IOP cube in a relational table. Once the export is complete, you can use Essbase loading rules for loading data in areas of interest. All these commands can be put inside a javascript or jacl command and then packaged as a script model. This script can be invoked from the IOP UI planning workshop.
-
Can reproduce us the features of Hyperion planning of data forms using Excel with the locking function and Essbase sending?
user4484703 wrote:
Thanks John. But I've seen smart installed. Currently using Essbase 7 and Hyperion planning 3.5 versions.I just wanted to check if its possible to get rid of the planning and have the same functionality in Excel.
Yes and no. You can replicate the main feature of the planning (re-recording of the numbers in a central database) with Essbase and the typical add-in. You can also duplicate the functionality of the forms created dynamically and the "point of view" or the selection of members with VBA coding. Other features of planning, such as to-do lists, supporting details and workflow are not as easily replicated in VBA.
Tim Tow
Applied OLAP, Inc. -
Clone Hyperion planning and production to create the instance of development
Hello
We have recently upgraded to 11.1.1.1, and currently, we do not have a test instance. We want to create a test instance. To create an instance of the application of the oracle bs, clone us the app and create a new instance. However when we try to do the same with the planning application, our dev instance is always pointing to the instance of prod. How can we get the dev instance to point to the dev database. Our configuration is essbase on linux and other applications are based on windows.
Pointers are greatly appreciated.
PrasadHello
I did not fully understand what you have done, say you that you have installed v11 on test machines and copied on patterns?
If you cloned just the planning system database, then all data sources will point to the location of origin and will need to reconfigure, it's that if it allows you to reconfigure the data sources, I don't know how you have configured.
The best option with planning is to create an empty application on the target computer, and then migrate the schema.
If you want to take this option while the migration was covered many times here, is such an example here:- Migration of Hyperion Planning Application
See you soon
John
http://John-Goodwin.blogspot.com/ -
Hyperion Planning and Varying attribute
Hello
Some can help me with the variable attribute in Hyperion Planning application.
Hyperion planning support concept variable attribute?
Concerning
EvelyneHello
Varying attribute applies only to the essbase so far, it is also with the arrival of new versions.
Sandeep Reddy, Enti
HCC
http://hyperionconsultancy.com/ -
Hyperion Planning and integration with MS share Point EPMA
Hello
Does anyone have information on how we can integrate Hyperion Planning / EPMA with Microsoft Sharepoint? Have we not a web parts etc.
Kind regards
AmolHello
There is a document of version 11:-http://download.oracle.com/docs/cd/E12825_01/epm.111/ra_setup.pdf
See you soon
John
http://John-Goodwin.blogspot.com/ -
Incompatibility of Hyperion Planning and Essbase dimension
Hi all
I created an applicatioon of planning that includes the six-member currency dimension.
But after you deploy the application, in the services of the administration broadly there are only three members.
Is anyone know solution.
Thanks in advance.
PatriciaDepends if they ae currency reports.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Deploying Hyperion and Weblogic
I installed product Hyperion Planning and Hyperion related components on a machine (Windows 2003 Server), and I want to use weblogic 9.2 as web application server. For configuration, my question is: can I use the Assistant to setup of Weblogic and add Hyperion Planning application out there? Or I should use Hyperion Setup Wizard, and then select weblogic for automatic configuration? Please advise, thank you!Hello
Just install weblogic and let the Configurator hyperion do the rest, so use the Configurator pick hyperion planning, then deploy automatically on weblogic.
He didn't really need to deploy manually if you just do a standard install.I think that should answer your question and be enough to make you.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Oracle Hyperion Public sector planning and budgeting release update
What is the latest version of Oracle Hyperion Planning and budgeting Public sector? Is Oracle Hyperion Planning and budgeting Release 13 released by oracle Public sector... Please any update is most appreciated...
Thanks in advance for the answer
Hello
11.1.2.4 is the last version available for the Public sector, planning and budgeting.
And here is the generic 2 Patch available for scheduling:
Patch 20817841: PATCH BUG - HYPERION PLANNING - PATCH UPDATE 11.1.2.4.001 VALUE
Patch 20937926: HYPERION PLANNING - PATCH UPDATE SET 11.1.2.4.002
Kind regards
Bala
-
Hyperion Planning calco - FIX and IF condition script.
Gurus
I'm new to Hyperion Planning and have a question:
I'm writing the script of followgin and he looks up and as the listed error.
SCRIPT:
/ * STARTCOMPONENT:SCRIPT * /.
COPYMISSINGBLOCK OFF SET;
DIFFICULTY ('AC_91100', 'AC_91380', 'AC_92105', 'AC_93100', 'AC_94105', 'AC_95100', 'AC_96100', 'BegBalance',
('Current Service level', 'FU_0', 'FN_00000', 'LO_000000', 'FD_100', 'FD_200' and ProposedYear,"Baseline",@Relative ("project", 0), @Relative("Total Entity", 0))
("AC_91100"
IF ("Start Date"->"projected" is #MISSING AND 'End Date'-> 'projected' == #MISSING)
DATACOPY 'Start Date'-> 'Budget' to 'Start Date '->' projected ';
DATACOPY 'End Date'-> 'Budget' to 'end '->' Date projected. "
ELSEIF ("Start Date"->"projected" == #MISSING AND 'End Date'-> 'projected'! = #MISSING)
DATACOPY 'Start Date'-> 'Budget' to 'Start Date '->' projected ';
ElSEIF ("Start Date"->"projected"! = #MISSING AND 'End Date'-> 'projected' is #MISSING)
DATACOPY 'End Date'-> 'Budget' to 'end '->' Date projected. "
)
ENDFIX;
/ * ENDCOMPONENT * /.
Error message when I validate the script:
An error occurred while parsing the script.
Please check the script between the column in the row: 9: 71 and column: C9: 78.
Found token '#MISSING'- expected tokens: <EOF>,<DIGIT>,<LETTER>,"/*STARTCOMPONENT:SCRIPT*/","/*ENDCOMPONENT*/","/*STARTCOMPONENT:FORMULA*/","/*STARTRULE*/","/*ENDRULE*/","/*STARTTEMPLATE*/","/*ENDTEMPLATE*/","\"File\"","\"Binfile\"","\"DSN\"","DataExportLevel","LEVEL0","\"LEVEL0\"","INPUT","\"INPUT\"","DataExportDynamicCalc","DataExportNonExistingBlocks","ON","\"ON\"","OFF","\"OFF\"","HIGH","LOW","DEFAULT","ONLY","AFTER","SUMMARY","DETAIL","ERROR","WARNS","INFO","NONE","DEBUG","WARNING","DataExportDecimal","DataExportPrecision","DataExportColFormat","DataExportColHeader","DataExportDimHeader","DataExportRelationalFile","DataExportOverwriteFile","DataExportDryRun","@_false","@_true","NUMBER" , 'MEMBER', 'BOOLEAN', 'STRING', < COMMENT_CPP_STYLE >, < SPACE >, "/ * ',' ' * / ', '\n', < token of type 56 > '\"","\"","\n', < token of type 60, > '[[',']]', '\n', < token of type 64 >, < SUBST_VARIABLE >, < hfm_VARIABLE >, < MACRO >, < REAL_NUMBER >, < INTEGER_NUMBER >, ' Tot ', 'ALL',"\ 'ALL\' ", 'AND', 'TABLE', < CALC >, 'CCONV', 'CLEARBLOCK'" ,"CLEARDATA","DATACOPY","DATAEXPORT","DATAEXPORTCOND","DATAIMPORTBIN","DIM","DYNAMIC","ELSE","ELSEIF","ENDFIX","ENDEXCLUDE","ENDIF","ENDLOOP","EXCEPT","FOR","ENDFOR","FIX","EXCLUDE","IF","LOOP","MBR","NONINPUT","EMPTY","NOT","OR","REFERENCE_TO_PARAMETER","RUNJAVA","SET","TO","TOLOCALRATE","UPPER","VAR","DATAEXPORTOPTIONS","AGGMISSG","CACHE","CALCPARALLEL","CALCTASKDIMS","CCTRACKCALC","COPYMISSINGBLOCK","CLEARUPDATESTATUS","CREATENONMISSINGBLK","CREATEBLOCKONEQ","DATAIMPORTIGNORETIMESTAMP","EMPTYMEMBERSETS","FRMLBOTTOMUP","FRMLRTDYNAMIC","LOCKBLOCK","MSG","NOTICE","REVERSE","REMOTECALC","UPDATECALC","UPTOLOCAL","::","#MISSING","=","->",<EQOP>,<MULOP> , < MDXMbr >, < SHORTQUAL >, < ID >, < INTEGER >, < CHAR >, < RELOP >, '@Loopback', < FUNCTION > "(", ";", ",", "[","]", "{","}", "-",") ReplaceAll ',' ','. ',' + ',': = ','": ' "
*****************************
Let me know what mistake I am doing here. Any help is greatly appreciated. Thanks in advance.
Thank you
SR
A few errors in this script:
1 DATACOPY is not allowed inside the IF block. You can use the assignment ('=') instead of datacopy
2 ENDIF is missing. You should have ENDIF before hook closing.
-
Hyperion Planning crashes (ESSG_ERR_MEMORY)
Hello comrades! I have a problem, Hyperion Planning hangs once a week. I looked at the catalina log and found something like 'exception Java Heap'. So, it's a fairly frequent problem, solution is to increase the size the Java heap through envoriment JAVA_OPTS variable max.
So I changed it this way, after having read a few guides:
JAVA_OPTS = "" - Xmx3584m - XX: MaxNewSize = 896 m - XX: NewSize = 896 m - XX: + AggressiveHeap ""
Everything worked perfectly, until today. Today, many users are modifing data, so the server is loaded and crashed twice already.
I found this message in the catalina log
com.hyperion.planning.olap.EssbaseException: ESSG_ERR_MEMORY
I appreciate any help with this problem, and if it will be useful here my system configuration:
Application: Hyperion Planning/Essbase 9.3.1
Application server: Apache Tomcat 5.0.28
Operating system: Solaris 5.10
Thank you, Ruslan ^_^
The error always refers to the size of a memory segment, it can occur when the main forms are open and there is not enough in the heap.
There is also a Support Oracle doc on a similar question - "error when opening large planning form:"No Server backend available for a connection..." "" (Doc ID 789267.1).
See you soon
John
Maybe you are looking for
-
I have an extensive collection of emails on a bill that I want to transfer to a USB key.
Is it possible to copy a collection of emails I have in a legal folder to a USB key?
-
Additional graphics in Minitour HP Pro 3130
Is it possible to add a graphics card Intel HD extra to a HP Pro 3130 Minitour, use a third and a fourth monitor?
-
different versions of a program, subvies location
Hello everyone, I have problem when I try to keep two different versions of a project in my PC. I developed a master project with a VI and severals subVIs. This project works correctly, but now I want to make some changes. Then I created another fold
-
H8 - 1520t Driver for Windows 7
Hello I just bought a HP ENVY h8 - 1520t (product number: C9D47AV) yesterday. I did a clean install of windows 7 Ultimate edition (because Windows 8 does not support a lot of my software). After that I installed Windows 7, I can't connect to the inte
-
Where is "Historic" for e-print?
I use HP AIO B210e, W7. I have my printer set for e-print. I would like to see the list of jobs in email I sent to my printer but don't know where to find "historic". Help, please! Thank you Marty