'permanent' site as part of the membership?

Similar Questions

• Muse Muse file, used to the partner free, always accessible site after the cancellation of the membership?

  I hope someone can help me with this:

  
  

  I bought a model Muse and created my agency site out of this. I want to use this site Muse as my site free partner within the CBA, so I just publish the site of ABC. I currently have a monthly subscription to Muse (not per year, because I've only used it during the months of creation) and I did not intend to use every month because I have to only have access to my site in Muse when it should be updated every now and then. And I guess I can even use ABC for this most of the time, and save money on a membership of Muse.

  1. I will always be able to access my site folder Muse in creative cloud file as soon as I canceled my monthly subscription to Muse? Or will this model (and therefor my site) be deleted / become unavailable? Or will lose my folder access creative cloud completely?

  2 and this file will remain available in this issue of creative cloud or will I need to save it somewhere else, so I can use it once I have reactivate my membership of Muse? Or make me even a risk of having an outdated file of Muse, looking at the frequent updates of the Muse?

  Again, the partner site is a free site, but not the same as a regular test place. You get this free partner site once you have another paying site.

  Situation very complex, but I hope someone can clarify this for me.

  Hi PuurYfke,

  If you cancel your paid subscription creative cloud, you will always have access to the level of membership, which offers 2 GB of free storage. You will have a grace period of 90 days to upload your files to your local machine and remove the files online to get your cloud storage up to 2 GB (or for additional storage to purchase separately if you choose). If you leave more than 2 GB of files in your storage cloud for more than 90 days, you may lose access to part or all of your files. Please read the FAQ and it will answer most of your questions:

  http://www.Adobe.com/in/products/creativecloud/FAQ.html

• I create a new reactive site using a large part of the content of an earlier version of the trouble with the scrolling text in the gallery.

  My question is the gallery which is part of the Master Page, will not move with the scroll bar on site, he's sitting in one place, causing the header back and the text which is to extend the image below.  Here is a link to the test site (you do shorter window so that you get the scroll bars).

  http://nwphotographix.com/hayesdesigns/

  I'm pretty sure is something simple that just got away from me, any help would be greatly appreicated.

  Thank you

  John

  It seems that your gallery is pinned to the browser window. This probably isn't what you want.

  When you select your gallery and look in the Control Strip, I suspect that this shows pinned at the top of the browser window, as follows:

  

  You probably want to pin to the center of the page, like so:

  

• How is it, I can't Adobe Story as part of my membership 'creative cloud! I was promised "all the creative programs" & there are already limits / - typical problems. Should it not be corrected, I don't bother renewing my membership at the end of my ' o

  How is it, I can't Adobe Story as part of my membership 'creative cloud!

  I was promised "all the creative programs" & there are already limits / - typical problems.

  Should it not be corrected, I don't bother renewing my membership at the end of my "annual subscription".

  stevenh38334489 wrote:

  So I have to be online to use Adobe Story? I can't download it?

  See help Adobe Story | Working offline with Adobe Story

• while I was buying a plan for adobe photoshop, I received a Message that the payment was made. However, the site is still showing "confirming membership" and I have received no email

  while I was buying a plan for adobe photoshop, I received a Message that the payment was made. However, the site is still showing "confirming membership" and I have received no email

  CC Adobe license can be activated on 2 machines using the same Adobe ID.

  Reference: licenses and terms of use | Adobe

• Hi, I am trying to download Adobe Acrobat, which is part of the Adobe Web Premium bundle I bought in 2011. Web Site of licenses (LWS) is broken. Also cannot register my serial number. Need help.

  Hi, I am trying to download Adobe Acrobat, which is part of the Adobe Web Premium bundle I bought in 2011. Web Site of licenses (LWS) is broken. Am also failed to register my serial number on the Adobe Web site after logging in.

  Could someone please help? Thank you

  Rabin

  You must purchase the software suite later.  Download of individual applications separately will not work.

• Web site service Canada at the request of birth certificate access advised to download adobe reader. Which I finished but now has informed that I must accept the end user license which was not part of the load down. LOA tried to re down load but already a

  My apologies, this is my first attempt to ask for help.

  In trying to gain access to the application for a certificate of birth on the site Web of Service Canada, they advised me to download adobe reader, I finished. However, recommended site then I had to start reader & accept end user license. It was not part of the download, appears I missed this step. Impossible to find where to accept them & when I tried to re download advised already loaded.

  Please tell us how to complete the acceptance of license, if I can use the product. Thank you.

  Did you launch Adobe Reader?

• Why can't I click on some parts of my screen only if you are using firefox. I can not use the upper part of my scroll bar, but can use the background. I cannot click on the top of all sites, but he can click on any part of the site.

  If you use firefox, I can't use my up arrow of the page or click on the upper part of the scroll bar to make it move. Can I use the middle and the bottom of the bar. Also, I can't click on some items that are on a certain part of a web page (upper part). When I use firefox to open my email the same thing. I can't click on the upper part of the page e-mail delete tab, check e-mail tab, etc. However, I can click on it when I use internet explore so I don't know if it of a firefox issue or not. Thank you

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• VPN site to Site, as a part of the work of the ACL, why?

  I built a VPN site-to site IPsec from A to B, I have about 10 different subnets in the traffice interesting ACL, now, I can get some subnets don't talk to each other, no problem, but some may not.  For example, A to site B 10.1.0.1 subnet was not working, but 10.100.0.1 has functioned and 10.1.0.1 and 10.100.0.1 is actually two interfaces VLAN on a same router.

  Debugging of the ICMP has shown, when A ping to 10.1 and 10.100, the firewall at site B receives pings of echo from site A and also the echo of ping time reply 10.1 recevived and 10,100, but only the firewall received echo response from the 10,100.  looked like Firewall VPN B has no echo response 10.1 the site in some way

  Config enabled on both sites several times, is unable to identify the problems and the incompatibility. 10.1.0.0/24 and 10.100.0.0/24 are two network objects in the same ACL.

  The Super Cisco can provide some advice, what could go wrong, what I could use to troubleshoot...

  Thank you very much.

  PS everthing worked perfectly for a few days, then I had the problem of loss of package on the Web link, now the VPN tunnel is up, no config has been changed, but some just subnets not achieved through the VPN.

  W.

  Hello Yue,

  WOW, that's weard.

  Good thing is that now everything works now and believe me, it won't happen to you once again, you and I will know what to do next time... lol

  If possible please brand of answering the question as to future users with the same problem will know what to do based on your experience.

  Kind regards

  Julio

• The Adobe site says that Bridge CS6 is part of the creative cloud

  It is not listed in the downloadable applications.  How to download as part of the purchase of creative cloud?

  Install an application such as Photoshop or InDesign and bridge office will be installed.

• Missing parts of the internet from firefox. Weird behavior again.

  Hello.

  I checked mozilla for solutions. Unfortunately, it's the old solution and Firefox has changed its position that the old solution is not valid.

  I see missing icons and images of my yahoo emails and a few other sites (don't remember who, but yahoo email is perfect example since it's popular e-mail service and I am sure that anyone use it may have this problem before and offer me a solution if all goes well).

  How to bring back the icons? There is nothing to with the Add-ons or hardware acceleration please (this "click on / off hardware acceleration option" is the myth).

  Thank you.

  Allowing page fonts is an important part of the process. I assume you reloaded the page after that.

  It is also possible to completely block the downloadable fonts. For example, on this page, most of the text uses the police to open San. To check if your Firefox download and use without open, you can right-click on the text, then choose inspect element (Q). The Inspector opens in the lower part of the tab. On the right side, the rule group is usually active, but you will see a fonts runs slightly to the right of that. If you click on that, it should watch without open, as in the attached screenshot.

  If your Firefox is not using downloadable fonts, please check this setting:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste gfx and make a pause so that the list is filtered

  C if the gfx.downloadable_fonts.enabled is in bold and "user set" false, double-click it back to true

  You can reload the page and see if that helps.

  Any improvement?

  Finally, there are some add-ons that may affect downloadable fonts. NoScript is an example. If you use NoScript, look for his drop-down/pop-up menu "blocked objects".

• Some Web sites do not display the fonts in firefox.

  For a while through a number of updates, I see that on some Web sites, rolling stone and cnbc are two example. If I go to the fonts in my computer and click on restore default settings for fonts, it solved that temporarily the problem. If I go to the settings and disable Web sites use their own fonts, it solves but fonts do not appear as sites intend to make them appear. This does not happen in other browsers, firefox only. I reinstalled windows fonts 7. I tried to disable hardware acceleration... Still has not solved the problem. How can I solve this problem in firefox?

  Do you know if there is a model of policing does not work? If you right click on the text of the problem and choose inspect element (Q), Firefox should open the Inspector tool in the lower part of the tab. On the right side in front of the HTML source code is a box that can usually shows the style rules. Click small heading fonts to show the font used for the text of the problem.

  When I visit the site, the text of the problem is in "Close Gotham" (with more than words displayed in the attached screenshots). These are downloadable fonts.

• You will need to download the quicktime plugin to use the Blackboard for the school site. can not find the plug-in but downloaded real quick time. help please, thank you!

  Hello

  I need to download the quicktime plug-in to use certain features on the site, Blackboard, for school. Plugin cannot be found and I downloaded quicktime. Help, please.

  Thank you

  Kirsten

  The QuickTime plugin is part of the QuickTime multimedia player.

  See:

  • https://support.Mozilla.org/KB/using+the+QuickTime+plugin+with+Firefox

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash

  Adobe flash is updated, but firefox says its not installed and install. Flash does not work in sites using Firefox, but the same read in IE or Google chrome sites work with flash. I use a dell high spec, less than a year using windows 7 Home premium processor Intel (r) Pentium (r) CPU P6100 @ 2.00 GHz, 1999 Mhz, 2 Lossnay, 2 logic and McAfee Firewall and AV processors

  Thank you so much for pointing me in the right direction... Unfortunately, the link does not work but I bypassed using a part of the link, I did a search on google and found the plugin here. Adobe.com/Get/flashplayer/Current/install_flash_player.exe

  Thank you so much,.

  Johnny 777777