Permission error - impossible to enumerate the objects in the container. Access is denied.

Similar Questions

• SRM 5.5 - vSphere replication - error: impossible to reverse the replication for the Virtual Machine. A snapshot operation cannot be performed

  Hi all, we have just run a test DR failover of a couple of virtual machines in our protected our failover site and all site swung perfectly, two virtual machines came online and all applications work well. However when we cam to r-eprotect machines virtual, we get some errors.

  One of the virtual machines seems to have lived the reprotect end process, it is still running, but has not moved to 89% for some time. The virtual machine has a couple of grand (a little less than 2 TB) VMDK. slow progress is just a consequence of the large VMDK?

  More worrisome is the virtual machine which don't reprotect at all. It generates an error whenever I click on the "Restore" button (error: impossible to reverse the replication for the Virtual Machine.) A snapshot operation can not be performed).

  
  Does anyone have any ideas as to the cause?

  Thanks in advance for any help.

  Andy

  Finally got to the bottom of this. The issue was that reprotect SRM work was trying to dispel any snapshots that were taken on the computer object virtual destination in VMWare, but could not clean snapshots.

  The reason why snapshots would not consolidate was because it was snapshots of temporary VEEAM who in fact any snapshot file listed in the VSAN data store. So when we looked through the browser data store, no snapshot file existed in the virtual computers folder. Trying a manual removal also failed.

  To fix this, we created a snapshot of the virtual machine in the original data center (note is the engine to the bottom of the virtual machine), this effect was to get rid of the 'fade' snapshot that was visible in the Snapshot Manager that VEEAM backup had left behind. Once this had disappeared, the reprotect back to DCA worked perfectly.

• Error: Impossible to clone the volume mounted on ' / ' to 'servername '.

  I'm doing a P2V for one of my Debian Linux server.

  I use coverter 4 autonomous.

  FAILD conversion each time to 3% with this error: impossible to clone the mounted volume on ' / ' to 'servername '.

  Here is the log file attached.

  I really need your help.

  Thanks in advance.

  where the VM helper is that it can resolve the hostname smtp2?  Can you try to do this by IP...

  Don't forget, the VM helper (according to its IP address and where it is connected within vSphere) must be able to communicate with the system physical source via SSH.

  The agent job, just before the failure:

  > \[2010-07-07 12:15:41.384 info B02CEB90 "[task-1'] Exception caught during the copy of volume: ' /usr/lib/vmware-converter/copyFileSystem.sh--sshClient/usr/lib/vmware-converter/ssh - root - host smtp2 - port 22 user - sourceMountPoint /-targetMountPoint/mnt/p2v-src-root / sshConfigFile--/usr/lib/vmware-converter/ssh.conf--sourceTarOption--rare ' failed." Return code: 2; Message:

  > / usr/lib/vmware-converter/ssh - z f /usr/lib/vmware-converter/ssh.conf root@smtp2 Pei 22 "tar - one-file-system - sparse-C / / CF-. » | tar - digital-owner/mnt/p2v-src-root - C / y - xf -.

  >ssh: could not resolve hostname smtp2: temporary failure in name resolution

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• Error: Impossible to clone the volume mounted on "/" from "ip address."

  Hi, I have a question that the title is consistent with the provisions.

  I use vmware vcenter standalone 4 running under windows xp, convert CC4 to esx3.0.2, and I assigned the IP statiic virtual machine help and dns server.

  When it operate at 98%, it turns out the title: error: impossible to clone the mounted volume on "/" from "ip address."

  I searched Google, it was said by someone, converter does not recognize the volume of software raid.but I also tried the hardware raid of CC4, the result is the same as above.

  So who can help me. I have download all the log files.

  Thank you.

  The reason is a failure, it is that tar fails after spitting on too many of these errors:

  tar:. / var: 2008-10-24 08:02:37 time stamp is 4243881.056239962 s in the future

  This issue is described in the release notes: http://www.vmware.com/support/converter/doc/releasenotes_conv40.html#76

  Whenever the 4.0.1 ships we will prevent it from causing the P2V fails, until then, you will need to repair the clocks on 1 or two of your systems.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  My old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  original title: operating system

  My old laptop has ceased to exist. How can I get permission to install operating system on a new PC? I provided with the old laptop installation discs, but permission to install them on the new PC is denied.

  If the installation provided with your Windows computer discs was preinstalled on the computer - it is OEM and cannot be moved. You can move Windows to another computer if you buy the retail version.

  You can move the windows on a new computer

  If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on one computer at a time (and if it's a version upgrade the new Windows computer must have its own license of qualification). The previous Windows installation on your old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer.

  If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.

• When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."

  access denied for the creation of a directory

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  Only when you try to install this application?

  What about BullZIP PDF Printer?

  (You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)

• Sent to-compressed file works only no error: "cannot complete the operation, access is denied."

  Original title: sent to-compressed file does not
  I'm on my laptop with Windows 7 home.

  Until today, I was able to compress files without problem.  I am the sole owner of the computer and have all the permissions.  I also went the folder I try to compress and checked the permissions it.  It happens on all records.
  When I click on send to - file compressed, I get an error message "Unable to complete the operation, access is denied."
  Thank you
  Holly

  Hello

  You can try the steps by Ramesh Srinivasan April 2. 2009 from the planned similar thread link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-desktop/compressedzippedfolder-in-SendTo-missing/bd060bea-5775-4b28-840C-96555f5ed289
   

• An error has occurred applying security information to: E:\randomfilename access is denied.

  I plugged my hard drive to my lap top and when I tried to delete or move files access denied because I do not have a correct security. Well when I tried to change the security that arises > an error has occurred applying security information to: E:\randomfilename access is denied. and that don't fade! I tried to turn on the Admin account and then to change it but I couldn't always do.

  I had the same problem, this is what worked for me:

  My mistake: trying to deny access to all users a part of administrators I had checked the box 'Users' and barred all access.
  But I foud out that Serge was the administrator, I'm also considered to be a "user", so even if the administrator has full rights, if it is also on the list of users he's used to be able to access anything whatsoever.
  A similar error is possible by checking "Everyone" when you set rights.
  Solution: go to your folder properties and allow free access to "Everyone" and "users". I hope it helps.
  See you soon!

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• When you try to delete the files from Fuji Film 'Finepix Studio' CD, getting error code 5, "cannot delete the file, access is denied."

  original title: when TRYING TO REMOVE FUJI Film 'FINEPIX STUDIO' FILES from the CD-ROM, I get ERROR CODE 5, "DELETE FILE FAILED, ACCESS IS DENIED"

  Charge FINEPIX STUDIO CD, pictures changed, closed the program and it wont let me open it.   Tried to uninstall the program, but getting the message above

  E-mail address is removed from the privacy *.

  Hi, James SnyderTD,.
   
  Take possession of the file/folder that you get this error message.
   
  See the following articles for the same thing:
   
  How to capture a file or a folder in Windows XP
   
  "Access denied" error message when you try to open a folder
   
  To take ownership of a file or folder

• Cannot delete the file, access is denied

  try to format the old drive hard could not
  all files deleted but can not delete 2 files adobe indicates that access is denied

  Schroeder7952,

  To add to what mysoul said, you can also try the following:

  To resolve this problem, you must turn off Simple file sharing, and then take ownership of the folder:

  1.	Turn off Simple file sharing: one. Click Start and then click my computer . b. On the Tools menu, click Folder Options , and then click the view tab. c. Under Advanced settings , clear the use simple file (recommended) sharing , and then click OK .
  2.	Right click on the folder that you want to take control and then click Properties .
  3.	Click the Security tab, and then click OK in the Security message, if an unknown device appears.
  4.	Click Advanced , and then click the owner tab.
  5.	In the name list, click your user name, administrator , if you are logged in as administrator, or click the Administrators group. If you want to take ownership of the contents of this folder, click to select the check box Replace owner of subcontainers and objects .
  6.	Click OK . You may receive the following error message, where folderis the name of the folder you want to take care of: You are not allowed to read the contents of directory folder . Do you want to replace the the directory permissions with permissions granting you full control? All permissions will be replaced if you press Yes.
  7.	Click Yes .
  8.	Click OK , and then reapply the permissions and security settings that you want for the folder and the contents of the folder .

  More information can be found in 810881 KB.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message "Group policy service has no logon. customer Access is denied. »

  Original title: "Group policy client service has no logon. Access is denied. "Error

  I have looked at other posts with this same error and followed the steps, but did not have a chance to get to my desktop. I use windows 7 on a z935-P300 of Toshiba Portege SSD if it's relevant.

  I use my home computer, I am the only user (admin) and I have no other connection to the user. I did not the latest changes to my computer. I tried the following:

  start windows in safe mode - always brings me to the login screen and the same error

  Perform a restore of the system to a previous point - no change

  has ran Startup Repair - windows can't find nothing wrong

  I have access to the command prompt via the advanced startup options in the section to repair your computer, I don't have a boot disk, my laptop with no cd player. I use an iPad to access this site.

  Thanks for any help you are able to provide =)

  Hi Prandeep,

  I ended up calling the Microsoft response service, and they were able to fix my computer.  Thank you for your help.

  Have a good!

  ~ Kristina

• Cannot open the file, access is denied

  I recently put a password on my user in XP Pro, and when I went to reconnect it does not recognize the password. Not sure if I've mistyped when I entered it or what. I logged in SafeMode as administrator, removed the password of this user, and he gave me a message about the saved passwords, etc.

  I am now able to connect to my user, but all the files that I had encrypted long ago now cannot be opened. I tried to decipher them and I get access is denied message. I can not open them as an administrator.

  Any thoughts?

  Now that I got the login figured out, I returned and changed the password to an old password and now I have access to these files. Decryption of now.

• Photosmart 7510 everything works except the scanner. scan reported an error Impossible to open the sessio

  scan reported an error "Unable to log on to the device" I really need to get access to the whole reason for this purchase scanner.

  I downloaded the updated HP for Mac drivers and the printer has been installed without any additional problems. Thank you

• I upgraded Lightroom today and the new version has given me several permission errors.  I followed the steps to solve the problem of permission and now I get the error code 16 - Please reinstall the product.

  I don't know how to reinstall from scratch.  Did I lose my data?  I backed up my files and catalog with time machine (before errors), but I do not know how to proceed.   Should I just uninstall the product?

  If you had installed the LIghtroom using Time Machine backup application or any other Adobe applications, yes it is best to perform the entire process of removal and reinstallation.

  If its just catalogue, that's fine, you can simply uninstall and reinstall Lightroom.

  Anyhw, if you have not installed the real application using the Time Machine backup, let us know if you tried steps mentioned in the link below?

  https://forums.Adobe.com/thread/1977483

  Re: Error in persistent Configuration 16

  In addition, you can try running the application of root user account once.