Permission errors on the importation of a custom in the person table column

Similar Questions

• Can't access iscsi with ' error in the evaluation table display iscsilist IndexSizeError:

  I have been using my readyNAS years and today, after having extended a target (in volume), I can't access the Volumes-> iSCSI tab anymore.

  SOS!

  I really need.

  The error I get in FF:

  "Error in the evaluation table display iscsilist IndexSizeError: Index or size is negative or greater than the quantity allowed.

  It's a bit different in Chrome, but it won't let me copy it.

  Error in the evaluation table display iscsilist IndexSizeError: cannot set property 'maxLength' on "HTMLInputElement": the provided value is (-1) is negative.

  Any suggestions please?

  Thank you!

  It was super useful:

  https://community.NETGEAR.com/T5/using-your-ReadyNAS/ReadyNAS-2100-error-encountered-uploading-updat...

  I downloaded the update of intermediate as a file and updated firmware to update.

  And now I can access the iscsi again tab.

  MDGM, thanks a lot!

  I'm a happier person now!

• The Master Table column updated based on the sum of column Table detail

  
  With the help of JDev 11.1.1.6.

  I have a master-detail table based on a link to BC.

  The main table has a column that displays an InputText or an OutputText, based on the value in another column.

  If the InputText is displayed, the user can enter a value and the database will be updated with that value.

  If the OutputText is displayed, it must be a sum of a column in the secondary table.  Also, this value will be written in the database.

  Question:

  How can I fill the OutputText in the main table with the sum of the values in a column in the secondary table?

  The detail table column is a manually entered InputText field.

  Thank you.

  Create a spike in the main table and write in its expression as follows - DetailVoAccessorName.sum ("ColumnName");

  This will calculate the sum of column table detail and then you can set the value of the transient attribute to attribute DB on backup operation

  Ashish

• How to align an image centered in the advanced table column.

  Dear friends,
  
  I developed a page of the OAF with an image column in the advanced table, but by default the image column is not centered,
  How to make image centered in the advanced table column, please let me know your suggestions.
  
  
  Thank you
  Keerthi.K

  HAD,

  In your column, create a tabular presentation and a rowlayout and the image, and then put in the rowlayout. Set the horizontal alignment of the rowlayout inwards.

  Kristofer Cruz

• How do I display values skyrocket in the IR filter for the joined table columns?

  Hello
  
  I have a problem in the IR the query is based on a table, joined with other tables. I would like to provide users the ability to use IR filter search bar in the joined table columns. The problem facing on this filter, the Expression field, by pressing the arrow button displays values for the fields in the primary table, but not for fields that come from joined tables. Have you experienced this behavior in your reports? Is this normal?
  
  TIA

  Hello

  Correlated subqueries can improve performance - but it does not depend on the involved tables, the number of columns and the existence of indices. As far as I know, the optimizer has problems with them. You could try to explain the Plans on the two statements to verify that.

  In any case, I created a new test page with the SQL for IR:

  SELECT E.EMPNO,
  E.ENAME,
  D.DEPTNO,
  D.DNAME,
  E2.EMPNO "EMPNO2",
  E2.ENAME "ENAME2"
  FROM EMP E, EMP2 E2, DEPT D
  WHERE E.EMPNO = E2.EMPNO(+)
  AND E.DEPTNO = D.DEPTNO(+)
  AND E2.PRIMARY_EMPLOYEE(+) = 'Y'
  

  http://Apex.Oracle.com/pls/OTN/f?p=267:226

  As far as I can see, it works properly - except that if I do a filter on the ename column, when I try to create a second filter, drop-down lists ename all the values, while the other columns list only the available values after having applied the first filter. Which seems strange that the filters are applied as ANDS. But it does the same thing for other areas - IE, the field used in a filter is not filtered for the second filter - so I guess this is normal, but only a person in Apex could probably explain why it is so.

  Otherwise, everything seems to work as I expect and the above page works the same as my test page, which uses external joins http://apex.oracle.com/pls/otn/f?p=267:224

  Andy

• ADF-how to read the value of the ADF Table column.

  Hello
  
  I created a table of the adf by reading the variable (CSV) file, separated by commas.
  N ° of the table columns is variable.
  The last column of the table has the input text box so that the user can enter the values in the user interface.
  I want to read these values provided by the user in my grain of support.
  
  Any help or pointers will be great.
  
  Thank you
  Lecornu

  Hello

  Have you tried to analyze the application after you have submitted the form? Just add the following code to your action method.

  import java.util.Map;
  import java.util.Map.Entry;
  import java.util.Iterator;
  
  import javax.faces.FacesException;
  import javax.servlet.http.HttpServletRequest;
  
  ...
  
  FacesContext context = FacesContext.getCurrentInstance();
  HttpServletRequest request = (HttpServletRequest)context.getExternalContext().getRequest();
  Map requestParameters = request.getParameterMap();
  
  Iterator iter = requestParameters.entrySet().iterator();
  while(iter.hasNext()) {
    Entry entry = (Entry) iter.next();
    String key = (String)entry.getKey();
    String value = ((String[])entry.getValue())[0];
  
    if(key.contains(":cellInput")) {
      String yourInputTextValue = value;
      // Do something with yourInputTextValue
    }
  }
  

  Concerning

  Majo

  Edited by: DerMajo the 09.11.2009 13:05

• Add the large table column

  All-

  I have my data (20 columns of ~ 700 000 lines) stored in a binary file and I would like to add a timestamp to each row of data.  I intend to use the sampling with the number of samples to add the time at which the sample was recorded in data.  I have read the data (~ 700 000 samples) and use a grand for a table 1 d with the same number of rows of data and then insert the 1 column in the largest table that has my data.  However, this seems to take a lot of time and I am looking for a faster/more simpler way. Significant NY, I mean the vi works for about 20 min before me give up and stop it.  I posted a PNG of the block diagram.  Any help will be much appreciated.

  Thank you

  Chris

  

  Hi humada,.

  Try this...

• Calculate the % with the pivot table columns

  I created an application with these columns:

  Metric       Study          Fast          Slow       On-Target     Total
  ---------------------------------------------------------------------------------
  Metric1     Study1           1             0              0             1
  Metric1     Study2           1             0              0             1
  Metric1     Study3           0             0              1             1
  Metric1     Study4           0             0              1             1
  Metric1     Study5           0             1              0             1
  Metric1     Study6           0             1              0             1
  Metric1     Study7           0             0              1             1
  Metric1     Study8           0             0              1             1
  Metric1     Study9           1             0              0             1
  Metric1     Study10          1             0              0             1

  I want to create a pivot table looks like this.

  Metric          Fast     Slow      On-Target     Total      % Fast     % Slow   % On Target
  ------------------------------------------------------------------------------------------------------
  Metric1         4           2        4            10           40        20       40

  The fast, slow, on the target and Total columns are calculated fields. Picky, I'm having is to get the % columns to work. I also tried create columns % in the form of columns of the table, but at each level of study, the % is 100% or 0%.
  
  I tried with duplicate columns, all different options to display the value as. None of them worked.
  
  Could someone help me? The version of the OBI is 10.1.3.4
  
  Thank you
  
  Shi-ning
  
  Published by: SPUD on November 21, 2011 23:09

  Sounds like it. You will need the account of studies as a measure in the criteria. You could do something in the repository, but the fastest way is:

  Criteria:
  Add the study in (it will not go into the PivotTable)
  create new measure based on any existing measure that has the background you need with the formula:
  cases where [existing] is not null then 1 else 0 end

  This will give you 1 for each line that your measure in effect is valid. Add this new measure in the PivotTable and treat it as a normal amount.

• Unable to get the smaller table column

  My page is at http://www.shopburbank.org/merchantList.php The Web site column is too wide, and I can't understand what the problem is. The mysql field is defined as varchar 255 and I went through all the entries to that there is no space after the Web site. The fields that are not met are Null.

  Thank you

  You want to give people the ability to change your data? By providing this link, I could easily click on the "Edit" link and change your data. And now that I know the link, I can copy it and go to the link, you can change the name of the detail page too.

  If you don't want people modify these data, you should probably take this link off the page until you can fix.

  You control the table using css. You can do this, but it seems that the page is larger than the actual size of the window when I see if something tells me you have a problem with that. For this reason, each column will expand to fit the width of the page. It doesn't look like it not is in the data.

• Xml file for reading in the clob in the staging table column

  Hello
  
  I am trying to query the intermediate table with the database adapter that has the column type CLOB containing the XML file. How to extract the XML of CLOB and map the fields to the another final scheme variable.
  
  Thank you
  
  Published by: chaitu123 on Sep 20, 2009 08:16

  (1) when you create DBAdapter on a table that has the clob column watch closely the xsd created for the DBAdapter cloumn clob element must be a String data type

  (2) create xsd for Xml files and create the variable of the xsd element

  (3) use ora:parseEscapedXML("yourDBAdapterclobElement") for XmlFileVarilable

  Krishna

• 404 error when the lowest selection (column name) for the metadata 11 g dictionary

  
  Hi all

  I get a 404 error when I select a column name and click the link for dictionary of metadata. I get the 404 because obiee is allowing more 179 characters for the web link. You do not get a 404 error if you click on one of the shorter column names.

  When you select the number of offices with commands and then click the metadata dictionary button you get the error 404 below and the web address is truncated causing the 404

  This is the product link

  http / / self/analyticsRes/SampleAppLite_BI0024/SubjectArea/PRCAT_Sample_Sales_Lite80cb6a2e /.

  PRT_Calculated_Facts80cb6aa9/PRC_N_of_Offices_with_Or80cb6cfb.x

  If you type the ml at the end, you can see the Web page you want. Also if you click on the area in question and then click the dictionary of metadata and access the column from here the link works.

  
  

  

  We receive this error in our Dictionary of metadata generated, but I can also reproduce the problem with the sample app, we have placed the dictionary in the folder anlyticsRes.

  I just wanted to check to see if someone else has this problem.

  Thanks in advance!

  S. Clark

  I opened a SR and a bug has already been reported, and the solution is in the latest patch.

  Solution

  The fix for the Bug 17449036

  is included in the bundle 20124371 Patch (patch bundle 11.1.1.7.150120). See this note for more information:

  Note 1488475.1: OBIEE 11 g: required and recommended patches and Patch Sets

  There is also a one-off Patch 17449036 on top of previous patch bundle for different platforms.
  It is advisable to be in the latest patch bundle. In this case, you prefer to apply exceptional measures, you can do but
  It is not for all platforms and all the patches together.

• SQL Loader in error after the modified table

  Hello

  "I had a column in the table that was initially defined as VARCHAR2 (250), I changed the table and made 1000, when the data is over 250 characters sql loader is in error"

  Field in the data file exceeds the maximum length. The table shows the field in VARCHAR2 (1000). Help, please.

  Thank you

  Gwenaël

  I changed the table again to make VARCHAR2 (4000) and still have the error. My data are about 350 characters. Help, please

  Change to the column sqlldr control file and explicitly set tank (4000).  The default data in sqlldr type is char (255).

• Error in the nested table

  
  I get the below error.11Gr2

  create or replace procedure r as
  type tbl is table of abc.REVIEW_ID%type ;
  t1 tbl;
  begin
  select REVIEW_ID bulk collect into  t1 from abc;
  for i in 1..t1.last 
  loop
  dbms_output.put_line ( t1(i).REVIEW_ID );
  end loop;
  end;
  
   
   
   error message
   
   
  
  Error(9,30): PLS-00487: Invalid reference to variable 'ABC.REVIEW_ID%TYPE' 
  
  
  

  Display this

  dbms_output.put_line (t1 (i). REVIEW_ID);

  TO

  dbms_output.put_line (t1 (i));

• Try to understand the error of the changing table

  Hi all
  The error I get triggered only when only the table in question is updated? How bout when he got inserted or deleted?
  Assume that the following code creates TRGGER and runs the UPDATE and INSERT statements:

  CREATE OR REPLACE TRIGGER section_biu
  BEFORE INSERT OR UPDATE ON section
  FOR EACH ROW
  DECLARE
  v_total NUMBER;
  v_name VARCHAR2(30);
  
  BEGIN
    SELECT COUNT(*) INTO v_total FROM section WHERE instructor_id = :NEW.instructor_id;
  
    IF v_total >= 10 THEN
      SELECT first_name||' '||last_name INTO v_name FROM instructor WHERE instructor_id = :NEW.instructor_id;
      RAISE_APPLICATION_ERROR(-20000, 'Instructor, '||v_name||', is overbooked');
    END IF;
  
  EXCEPTION
    WHEN NO_DATA_FOUND THEN
      RAISE_APPLICATION_ERROR(-20001, 'This is not a valid instructor');
  END;
  
  Trigger created.
  
  SQL> update section set instructor_id=101 where section_id=80;
  update section set instructor_id=101 where section_id=80
         *
  ERROR at line 1:
  ORA-04091: table STUDENT.SECTION is mutating, trigger/function may not see it
  ORA-06512: at "STUDENT.SECTION_BIU", line 6
  ORA-04088: error during execution of trigger 'STUDENT.SECTION_BIU'
  
  SQL> insert into section (section_id,course_no,section_no,instructor_id,created_by,created_date,modified_by,modified_date) values (200,10,1,108,user,sysdate,user,sysdate); 
  
  1 row created.

  The mutation of error raised when I tried to update the table but does not when a row is inserted.
  
  Is it possible to trigger the transfer error in running the INSERT statement without changing the trigger? Are there any other conditions that may trigger the error even without changing the trigger?
  
  Best regards
  TA.
  
  Published by: debonair Valerie on May 5, 2011 02:17

  The insert is a single row insert, and the database knows - it wiill do not suffer from any problem of changing table.
  However, update may or may not be dealing with many lines, so could have the question.
  If you did a multi line insertion, or even one that could potentially be multi line, then you get the same error.

  Carl

• Shared the event Types Bundle + repository local event = error in the source table

  Hello
  
  I use a CEP beam for deployment of more types of events common to other Applications. In one application, I declare a type of event locally in the EPN
  
  i.e.
  

  <wlevs:event-type-repository>
            <wlevs:event-type type-name="someLocalEvent">
                 <wlevs:properties>
                      <wlevs:property name="someProp1" type="char" length="256" />
                      <wlevs:property name="someProp2" type="char" length="256" />
                 </wlevs:properties>
            </wlevs:event-type>
  <wlevs:event-type-repository>

  And declare it as type of event for the table:
  

  <wlevs:table id="table1" table-name="TABLE1" event-type="someLocalEvent" data-source="xeDs" />

  Now, I get this error:
  

  <Unknown event type [someLocalEvent] associated to external data source [table1]> 

  But if I put it in the shared repository event, it works as expected. What happens if the event type is not intended to share? Is it possible to add new types of events locally and he aggregate with shared events?

  Hello

  Can you confirm the "someLocalEvent" and "table1" are defined in the same application?
  It may be wise to ensure that the event type is defined before the table.

  Best regards